Acrobat software plug-in component DC not no projection in Office 2016 Com Add-ins

Similar Questions

• Windows Vista not reponding: Windows Installer, Office 2007 (Outlook), add/remove programs, System Restore, etc...

  Gentleperson,

  I am looking for a solution fix my PC, HP Pavilion Slimline. Windows install Office 2007 (Outlook), add/remove programs and the system restore will not work. The apparent problem is a file corrupted in the system, based on the forums of Windows and Office 2007 and published articles.

  I tried the following:

  • Retore system Mode safe mode and in Safe Mode network - without success
  • In Normal Mode Windows Vista will not respond to the system restore or the Add/Remove programs - without success
  • Chkdsk/r - unsuccessfully
  • sfc/scannow won't answer - no success
  • Msconfig.exe helped with a clean boot; However, this does not solve the problem...
  • Windows Installer is in auto status, but can not start; I have a 1053 error messsage... too slow

  As it can be seen, there is a problem with my operating system. I have a recovery disk to format my PC in its original configuration. However, I have not saved my files that I won't lose to the formatting. Please advice.

  Thanks in advance,

  Lhorea

  I have general thing is you did not run memory diagnostic
  (% SystemRoot%\system32\MdSched.exe).
   
  You can try the recovery prompt environment SFC. Startup type
  Repair in Help and see
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  --
  ..
  --
  "lhorea" wrote in message news: 2a55a4d8-3acb-4b2d-9322-2756d47a5808...
  > Gentleperson.
  >
  > I am looking for a solution fix my PC, HP Pavilion Slimline. Windows
  > Installer, Office 2007 (Outlook), add/remove programs and restoring the system
  > will not work. The apparent problem is a file corrupted in the system,
  > on the forums of Windows and Office 2007 and published articles.
  >
  > I tried the following:
  >
  > a.. Retore system Mode safe mode and in Safe Mode network - without success
  > b.. In Normal Mode Windows Vista will not respond to the system restore or
  > Add/Remove programs - without success
  > c.. Chkdsk/r - unsuccessfully
  > d.. sfc/scannow won't answer - no success
  > e.. Msconfig.exe helped with a clean boot; However, this does not resolve the
  > problem...
  > f.. Windows Installer is in auto status, but can not start; I get a
  > messsage error 1053... too slow
  > As it can be seen, there is a problem with my operating system. I have
  > a recovery disk to format my PC in its original configuration. However, I have
  > not backed up my files that I won't lose to the formatting. Please
  > advice.
  >
  > Thanks in advance,.
  >
  > Lhorea
  >
   
   

• iCloud inactive 5.1 component software plug-in for Outlook 2016

  Problem: iCloud component plug-in software on Outlook does not activate at startup of Outlook

  Versions: iCloud 5.1.0.34 with Outlook 2016 on Windows 10

  Synopsis: When Outlook is started, updates with iCloud are not synchronized until I go into Options > Add-ins dialogue and explicitly activate the add-in.

  Question: How can cause Outlook automatically activate the add-in at startup time?

  Ended up doing a reinstall/repair to iCloud and now it's fine. The add-in is started and activated with Outlook.

• Adobe Acrobat 11 does not work with Office 2016

  Hello

  I have Adobe Acrobat 11 and just upgraded to the 2016 2013, after the upgrade, office in Office applications integration does not work. I tried to reinstall with no luck.

  It's a question of knowledge, or y at - it an update to make it work?

  Thank you

  Julian

  Hi julianhaines,

  Acrobat XI is not compatible with MS office 2016 https://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html

  Kind regards
  Nicos

• Importer of CT in Excel 2003 does not appear in the COM add-in Menu

  I have a program that generates a PDM file with data, and when the run is complete, I would like to import the data into Excel and manipulate by using a macro. I can import the file manually and run the macro by opening a second file that contains the macro, but open the second file is a chore.

  I would like to expand the macro so that it automatically imports the file PDM, and based on what I've seen on the forums for that, I need to register to the importer TDM as a COM Add - In. When I go to the menu COM in Excel and you try to add ExcelTDM.dll, it does not appear in the menu.

  A few additional details that may be useful:

  TDM Excel importer is version 3.4.0.0

  I already tried to uninstall and reinstall the importer

  Using the Excel toolbar works to import the data

  A double click on a file works to import the data

  The installed files are located in C:\Program NIUninstaller Instruments\Shared\TDM Excel import. Moving them to C:\Program NIUninstaller Instruments\Excel TDM had no effect.

  Thanks in advance for your help.

  I do not see the importer of CT in the COM add-ins, but the VBA ran very well...

  I tested it on a clean machine with Excel 2003 and importing TDM 3.4.

• Error: OPatch component is not available in the software Center to patch

  Hello
  
  I've got OEM 10.2.0.5 and try to apply the patch to database. On the step 2 'List of targets' when you press 'Next' get this error message:
  
  Upgrade OPatch. -OPatch component is not available in the software library to the xxx of the target patch. Please run the OPatch tab jobs update task to get the OPatch version required for this target. See the FAQ #6 production grid Automation with deployment procedures (www.oracle.com/technology/products/oem/pdf/grid-automation-deployment-procedures.pdf) for download OPatch at the library of software in online and offline mode.
  
  I see the #6 FAQ and downloaded OPatch manually, upload succeeded according to the answer.
  
  In deployments OEM-> Configuration-> components, I see that the p6880880_10.2.0.3_38 correction, status is "ready". But still get this error.
  
  What should I check? How do I ensure that 6880880 has been installed or not installed?
  
  Maybe I should make a configuration of rights for target xxx those who?
  
  Really need help
  Best regards
  Nikolajus

  Hello Nikolajus,
  assuming that you're using "Oracle Database Patch".
  The first page of this procedure includes a 'Upgrade OPatch' checkbox, this check box selected?
  Concerning
  Rob

• Acrobat PDF plug-in does not appear in Word 2013

  After you install Acrobat Pro XI, I don't see the Acrobat tab in the Ribbon bar Word 2013. If I use Word 2010, I see the Acrobat tab. Is this a bug in Acrobat XI Pro that will be fixed for 2013 Word/Office?

  Good news!  After the application of the current Acrobat and Microsoft Updates, the Acrobat Ribbon is in 2013 office products.  Have not tested PDFMaker yet but it is a step in the right direction.

• Is - this Hyperion/Essbase component software plug-in works with Excel 2010?

  This possibility and performance improved/reduced?
  
  Thank you.

  Yep, the matrix of Certification is not entirely clear on this point, but a pretty good authority (Matt Milella) said a 'no' for 64 - bit with the add-in: http://essbaselabs.blogspot.com/2012/04/smart-view-64-bit-office-support.html

  For users currently with the "inherited" add-in 2003, the main "point of pain" will be moving to the Add-Ins Ribbon and the corresponding extra clicks / additional hits in each shortcut. Current 2007 users will we have refuted this transition already.

• Why Acrobat DC does not work with office 2016?

  When Adobe's Acrobat PDFMaker DC component software plug-in work with office 2016?

  Doesn't seem to work now, thanks for getting back with me.

• HP Officejet Pro L7700 Series: HP CUE scanning flow component does not work HP C8192A

  After being able to scan with my HP Officejet Pro L7700 Series a few years, I suddenly surprised by the message "HP CUE-scanning flow component does not respond," it is impossible for me to analyze using my WiFi connection. Scanning to a USB is the only remaining option. I used HP Print and Scan doctor, but that was of no use.

  What can I do else?

  Hi @Andries49

  Andries49 wrote:

  Dear Sunshyn2005,

  Thank you for your response. It did not solve my problem, however, as I can't find the 'hpqscnvw"- file. The only file (exec) that 'sc' in its name was "hpiscnapp", but a double click that does not start the digitization program.

  When you reply to a message on the HP Forums, please check that you use the button on the web page just below the message you are replying to.

  Please follow the following steps to perform an uninstall of compression and a new facility;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose Save as, save to desktop > OJProL7X00_Full_14.exe
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have annon HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Could not locate the component error, not found MSVCRT10.dll,

  trying to bring to the top of Photoshop CS3 after reinstalling because of a factory reset on my computer, receive a "unable to locate component error" not found MSVCRT10.dll, but this file is located in the file C:\Program (x 86) \Adobe\Adobe Photoshop CS3\Plug-Ins.  What should I do now?

  Hello

  Photoshop CS or third-party plug-ins remove of Photoshop CS3/Plug-ins folder.

  1. remove all third-party plug-ins designed in the folder of Photoshop CS3/Plug-Ins for Photoshop CS and Photoshop CS.

  2. If you have set the plug-ins folder of Photoshop CS as an additional plug-ins folder in Photoshop CS3, choose the command Edition > Preferences > Plug-Ins and scratch disks and do one of the following:

  -Uncheck the option of additional Plug-Ins folder.

  -Click on select, then select a folder that contains no third party plug-ins designed for Photoshop CS or Photoshop CS plug-ins.

  If the problem persists after the question in the Adobe Photoshop forums.
  http://forums.Adobe.com/community/Photoshop/photoshop_windows?view=discussions

• Run the run-time error '339': 'mscomct2.ocx' or one of its dependenceies component is not correctly registered: a file is missing or invalid

  As I upgraded fom Win 7Pro to Win 8 Pro I can't get one of my software programs work correctly, it worked fine on Win 7 Pro, I tried all sorts of internet remedys, but nothing works, I get the message following run-time error '339': 'mscomct2.ocx' or one of its dependenceies component is not properly registered : a file is missing or invalid.i have tried to get that it is running in compatibility mode, but the same error message keeps comeing. The software installs fine, can someone give me that any ideas how I can stop this error message and get my software to work, it's the only piece of software I use every day, but during the last three weeks, I have been unable to use frustrating it.very. Thanks You.Robert

  A quick and simple solution to this problem.

  Simply follow the instructions below, download the file, install it and bingo, you have sorted.

  This will save you having to reinstall interactive Raceform, but you can do before a new installation if you wish.

  Click on the link below (or copy and paste it into a browser address bar):

  http://download.Microsoft.com/download/vfoxodbcdriver/install/6.1/W9XNT4/en-us/Vfpodbc.msi

  If you do this in Google Chrome you will see this in the lower left corner of your screen-

  
  Double-click this and you should now see this-
  
  Choose to run
  Now, you will see this-
  
  And it should now be as easy as just after the other, agree questions etc after clicking this first suite.
  This will allow you to install drivers for Visual FoxPro that will hopefully Raceform Interactive must be installed after that he completed.

• I installed the acrobat software on my laptop but I couldn't use it. I couldn't open the document or even the athlete himself.

  I installed the acrobat software on my laptop but I couldn't use it. I couldn't open the document or even the athlete himself.

  It's like "my car will not start! A lot of missing information.

  You must download the installation program. Once downloaded, you must run the Setup program to install the software.

  Is an employer provided your computer?

  If Yes, are you allowed to install the software?

  Were there any messages during the "installation"?

  We need the correct messages and error codes.

• I'm still using CS5 and Nik/Google software plug-ins. If I switch to CC - what is anyway disturb my plug-in software I have in place?

  I'm still using CS5 and Nik/Google software plug-ins. If I switch to CC now will be that in any way affect my plug-ins or cause me to have to download everything again?

  It's the compatibility table for Nik Software. So you should be ok. You might be interested in this thread that addresses this issue

  Re: Are the Google Collection of plugins and Photoshop CC Nik 2015 compatible?

  There is sometimes a problem with the plugins does not, but this seems to be overcome in order

  Hope that helps

  Terri