Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

Similar Questions

• Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

  I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

  Thanks in advance.

  Hi quietly,

  If your CD/DVD drive doesn't work, how do you have a system restore?

  Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

  Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
  Check this box!

• Have you installed the original OS and drivers toshiba

  YES.

  But it's the same problem. You stop please ask these stupid questions?

  Not all people here are stupid and don't know much but you seem to give the same responses to the constant problems and repeating the same. AS ALWAYS.

  HAVE YOU EVER GIVEN FOR SOLUTIONS TO THE MASS? NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO.

  WHY DOU SELL YOU COMPUTERS and let people stupid answers CUSTOMERS HELP FORUM?

  SUPPORT AT LOW COST.

  IS IT NOT?

  Hello Matrox

  What is your problem buddy?

  It's user forum and not an official Toshiba support where you can exchange your opinions and problems with Toshiba directly so either take participation in these discussions and be cool or visit Toshiba service in your country and tell them your opinion on the Toshiba support directly.

  As I see you have posted more than 50 comments here, so you know how this forum works.

  Be cool man. ;)

• I can't go to my printer. It will not recognize the ink cartridges are full!

  My epson 7400 has not been used for 6 months. I cleaned and aligned the nozzles and it used 2 full cartridges. I installed new ink cartridges, and he says they are empty. Now none of the buttons work, it does not seem to recognize all commands. What should I do?

  Hello

  Turn the printer off

  Unplug the printer from the computer and the wall outlet

  Reinstall the cartridges

  Support all the ink cartridges until they snap into place to make sure that they are well housed

  Close the cartridge cover and push it down until it snaps

  Close the scanner

  Press on the Stop button to start loading of ink. It takes about 2 minutes.

  When the the light stops flashing and remains on, the ink load is complete

  	Caution:
  Never turn off the Epson Stylus CX while ink is in charge or you'll be wasting ink. If the ink light flashes, press on the Stop button and lower all the cartridges safely Manually clean the print heads Plug the printer into the wall outlet and the computer.  Turn it on and try printing again. Updates

• Printer cannot print; There is a file in the print queue which will not allow delete and blocks all other files. It's called mtml: I can't print all the documents because of this barrier. What can I do?

  I can't print because a barrier print job is in the queue and refuses to move.  I try to remove it and it will not delete.  Its label as file mtml (mtml:A07448 - 1464-4478 - one...)    I plugged the printer off and unplugged and waited, but he still does not move.

  I was unable to delete the file in question.

• How can I re-install the master collection cs4? I downloaded but I can't Setup.

  I purchased the cs4 master collection CD and I upgraded to my MacBook Pro. I downloaded cs4 on Adobe site but if I click on the "setup" icon, it says "Unable to open the installer because it comes from an unidentified developer." I have a serial number registered. Please help me install this program!

  Hi issoosige,

  Please visit this link, it explains how open, open the installation program. Please follow the steps, and then start the installation. You can undo changes once you able to install the software.

  How to install the software developers unsigned on a Mac

  Thank you

  Nikhil Gupta

• I am trying to install a printer, and it will not print

  I have a HP Deskjet 920C printer and had to change cable because of the new Tower, can not get printer to work

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  You should look at the HP web site.  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&LC=en&DLC=en&cc=us&lang=en&product=60753

• Sony DVD + RW DW-Q58A Drive will not recognize DVD movies

  I've upgraded windows xp to windows 7. I have a Sony DVD + RW DW-Q58A drive.  It works very well for reading, writing etc... But won't recognize DVD.  Bought films or movies burned.  Occasionally, he will recognize an and he is hit and weather it's a bought movie or a film engraved... Help?

  There are 2 lasers in a Dvd Drive, a CD and a DVD. I'm guessing that the DVD laser has gone wrong. This is common with older players like yours.

  You can try to uninstall the IDE channel that the unit is in the Device Manager and reboot, but I doubt it will help.

• New default printer. Photoshop will not recognize it. Help?

  I recently bought and installed a new epson printer to replace an older version.

  the new printer was made by default and deleted the old one.

  Photoshop Elements 9 is not the vain printer and new research

  for the former.
  LLA printer works perfectly for all other applications.

  I'm puzzled frustrated amd.

  Someone had the same problem? If so how to solve it?

  Thanks for any solution

  Hi Jeff, I found a way to turn the problem using Epson scan.

  Thank you for your help

  Concerning

  Michael

• Acrobat DC cannot find the scanner connected to 10 Home Windows but Windows can

  Hi all

  I'm fighting to get DC Acrobat and Photoshop CC to scan from my printer/scanner HP connected via a wireless network.  Acrobat DC reports no scanners found then I have to use a browser for the analysis that works every time.  So my question is which port is DC Acrobat and Photoshop to use so I can check if these ports are blocked by another application.  Many thanks and best wishes,

  Paul D

  Have you installed the scanner driver? These applications will not reach out by using a browser.

• I have a kodak esp6150 printer, try to install on an asus laptop k601j running windows 7. driver will not install keeps giving an error.

  driver will not install keeps giving an error.  Kodak has been in the computer for 2 hours and could not resolve the matter still to come with the driver installation error. They said that its operating system issue or number of laptop manufacturer.  installs fine on other computers in the House. for any help or suggestion would be appreciated.

  Try to download and install the latest drivers for Kodak for the ESP 6150:
  http://support.en.kodak.com/app/answers/detail/A_ID/17138/selected/true

  Installation instructions

  1. Check that your computer meets the system requirements.
     NOTE: WINDOWS XP 64 - bit Operating System only is not supported.
  2. Disconnect your all-in-one printer from your computer.
  3. Make sure you have connected to the computer using the administrator account.
  4. Close all programs.
  5. Download the software on your computer.
  6. Double-click the *.exe file, and then follow the on-screen instructions.
  7. Once the installation is completed, connect your all-in one to your computer.
  8. Select Start > programs > Kodak > Kodak AiO Home Center.

  Troubleshooting of the printer:

  1. open the printer Troubleshooter by clicking the Start button

  2. then click on Control Panel

  3. in the find what box, type troubleshooting

  4. then click on troubleshooting

  5. under hardware and sound, click "use a printer.

  Setting up a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

• Error 80200011 when you install the Kodak printer software.

  Original title: error 80200011

  I try to install my Kodak printer software and I get this error 80200011 at the end of the installation process. Can someone tell me what this means and how to fix it?

  Hi Treb20,

  ·         What is the model number of the printer?

  ·         You install the software from a CD or have you downloaded?

  You can refer to the following articles of Kodak and see if they help.

  What should I do if I can't install the software for my all-in-one printer?

  Problems installing software with all-in-one printer

• error 0X800f0214 when you install the printer driver

  When you install a printer driver (network), an error message appears saying that the action could not be completed - error 0X800f0214. The printer is shared and my firewall is set to off. I have absolutely no idea on what to do and would like to get advice and INFO.

  Marc DS,
  It would be useful to have a bit more information, such as the make and model of the printer, what version of Vista you are running and what type of network - wired or wireless (or both), if there are other non-Vista on the network computers, etc.  You get the error message corresponds to "the specified path does not contain any applicable device INFs" which means basically the location where the OS is looking for the driver file does contain a valid driver file.  There could be several reasons for this, but without knowing the configuration of network and printer, it's hard to identify.  Make sure that the driver is one that is suitable for this printer model and your version of Vista and make sure that the path (c:\ - or other) is correct and that the location of the driver file is shared.  I hope this helps.  Please post back with more information if you still need help.

  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• I have a Mac and added the DNP DS80 printer but it will not let me print. He said "the paper size selected is not compatible with installed support." Anyone have this problem?

  I have a Mac and added the DNP DS80 printer but it will not let me print. He said "the size selected is not compatible with the installed support." All the answers for this?

  Refer to the discussion: Lightroom v4, v5, v6 Will not print to a DS40 printer

  Kind regards

  Mohit