Acrobat XI very slow on Yoga 3 Pro
I noticed that Adobe Acrobat XI is very slow on the Yoga 3 Pro. More precisely lag when zooming in and out, panning, scrolling and fullscreen. This is particularly evident with full screen and quite annoying in tablet mode. However, with the same files PDF using the Microsoft Reader application does NOT have this delay.
What I then discovered is that this has something to do with the Core M processor and get its limited power. If you change the power plan in OneKey high performance optimizer (from symmetrical, for example), Acrobat becomes suddenly quite catchy.
Mode Tablet, if you just want to read a PDF file (and use Acrobat), you need not 'high performance', in order to extend unfortunately bad Yoga 3 Pro, you want to put in balanced or Power Saver - that should still be enough to read PDF files, but it is not the case with Acrobat XI unfortunately.
I don't know what CPU limiting, of the power management feature is causing this issue in Acrobat, but I thought I would post this because I couldn't find anything on the internet about this issue.
Yes, the CPU is a bit of a brake on the Y3P and Acrobat is not the lightest suite. Although in principle, balanced expected clock upwards at full speed under load.
Have you checked the minimum/maximum values of CPU on the profile balanced in the Advanced Power Options?
I'm also a fan of reading with SumatraPDF; It relies on the muPDF Super light and super fast to make PDF files, but does not support the PDF editing features or fanciful as forms.
Tags: Lenovo Notebooks
Similar Questions
-
Using Acrobat Pro and what impression on network printer it prints very slow. I have found that if we choose to print the image works fine. But how do I print as image remains for all of my PDF files. I have to choose every time now and that is not always known.
Hi jeans37547790,
Please do mention it below as follows to change the settings:
Open Acrobat > click file > print > click on advanced > and check the box that says "Print as Image".
Here is the screenshot:
Let us know if you face any problem.
Thank you!
Shivam
-
Yoga 2 Pro - very slow Wifi, ~0.74Mbps - 3Mbps
Hi, I've had my Yoga 2 Pro for a few weeks now and I thought it was my imagination until I decided to perform a speed test. The wifi on the laptop is really slow. Run the speed test (speedtest.net) on my desk I have 17.5Mbps, while on my yoga 2 pro I get various ones between 0.75 and 3Mbps.
It would have taken me well over an hour to download the latest drivers wifi. Instead, I downloaded on my desktop and put on my laptop HARD drive.
Whatever it is, the latest drivers did not fix the problem of slowness, I have tried many "patches" on the thread on the wifi of a fall, and performance, but unfortunately nothing worked.
Does anyone have any ideas on how to solve this problem? I'm bordering on his return it if I can't get it resolved soon.
Don't you hate it when you manage to solve a problemn moments after you ask for help?
I now have my speed test 2 of Yoga Pro 17Mbps.
I installed and used wifi Intel connections Manager is opposite to the windows one.
That's all...
Hope this helps someone else!
-
Acrobat Pro XI Java: Removal of Page is very slow
Hello world
Here is a set of code that I had working in Acrobat XI to pull up a popup window which, when the user selects Yes, is able to search a keyword hidden on some pages in the PDF file and then delete the corresponding pages. It works, but the problem is that it takes almost a minute to treat. I'd love to someone entered for what might slow the process down. I am very new to Java specific suggestions would be greatly appreciated!
Thank you in advance,
Christian
CMSG var = "continues with the current action will delete the TASKS application and its data." This may take a few minutes to complete. « ;
CMSG += ' \n\nDo you want to continue?
var nRtn = app.alert (GSMC, 2, 2, 'Question Alert Box');
if(nRtn == 4)
{/ / A yes answer}
Code to do the thing you can do on a Yes
Console.println ("the answer is Yes");
for (var p = this.numPages - 1; p > 0; p--) {}
for (var n = 0; n < this.getPageNumWords (p); n ++) {}
If (this.getPageNthWord (p, n) == 'CHESDELETE') {}
this.deletePages (p);
break;
}
}
}
}
Another yew (nRtn is 3)
{//No response
Console.println ("the answer is no");
}
on the other
{//Unknown response
Console.println ("the response was something other than yes/no:"+ nRtn ");
}
Hello world
After review of this topic, I realized a solution. So I hope that someone in my situation can benefit in the future!
* A brief summary, I had an interactive PDF application where multiple pages are "generated" when some options (check boxes) are selected. When the items are deselected, I needed a way to get these pages on the document. Research of the approach of the nth Word worked, but it is become very slow, especially as the PDF has grown larger. The approach below you will remove the pages having engineered very quickly a document based on a button/field value and can be adjusted accordingly.
As follows:
- Somewhere in the document (not on the template, unless you make sure that the domain names are static when created) create a field text and format to store the numbers with decimal places to zero . It's your container (so, for example, I named it CHES container).
- Then go into the model that needs to be created at a later date. In the page toolbar, right click on your model page and go to properties > Actions
- For select trigger, choose "Open Page"; For select Action, choose "Run a Java Script"
- Paste and modify the following script:
-----------------------------------------
var p = this.pageNum;
Console.println (p);
this.getField("CHES_Container").value = p;
-----------------------------------------
5. This action will say your model page, when, created to identify its own page number and place it in the "container", which once again, for me, is called "CHES container.
NOTE: Check to be sure your container shows a number, and that it is accurate. Later, you can hide this field, but for now, it is useful to find errors that may occur.
6. click OK and click on the button (checkbox etc.) that will trigger the removal of these specific pages.
7. go in field properties > Actions. For select trigger choose "Mouse Up"; For select Action, choose "Run a Java Script"
8 paste and modify the following script:
-----------------------------------------
var p = this.getField("CHES_Container").value;
this.deletePages ({start: p, nEnd: p + 2});
-----------------------------------------
NOTE: nEnd: p + 2 adds just 2 pages to the start range. So just change accordingly based upon the number of pages given birth there are requiring deletion.
As a tip, my relaxation complete box script was:
-----------------------------------------
Var SHEETS = this.getField ("CHES Check");
var CHES1 = this.getTemplate ("CHES Pg1");
var CHES2 = this.getTemplate ("CHES Pg2");
var CHES3 = this.getTemplate ("CHES Pg3");
var p = this.getField("CHES_Container").value;
If (ches. Value is "Yes")
{
CHES1. Spawn();
CHES2. Spawn();
CHES3. Spawn();
}
on the other
{
this.deletePages ({start: p, nEnd: p + 2});
}
-----------------------------------------
Please let me know if I missed something or if you have any questions! Thanks again to everyone for your feedback and patience.
-
MacBook Pro mid-2012 very slow
Hello
My MacBook Pro is very slow (it has gotten worse recently). Applications to take ages to load, Firefox is hogging resources and very slow, get the focus of the mouse has a huge lag and I was spinning.
Currently I have 4 GB of RAM and is considering the upgrade to 16 GB. You run an EtreCheck report (below). Is there anything else I need to do? Why he began to be so slow after years of reasonable speed? Is there something I can adjust in Firefox?
Opening documents and get stuff done becomes frustrating!
Thank you for your support.
EtreCheck version: 3.0.4 (308)
Report generated 2016-09-21 12:50:28
Download https://etrecheck.com EtreCheck
Duration 09:05
Performance: average
Click the [Support] links to help with non-Apple products.
Click the [details] links for more information on this line.
Problem: The computer is too slow
Description:
Computer is slow, Internet is slow, the development of the mouse in any program is slow, a lot of spinning.
Hardware information: ⓘ
MacBook Pro (13-inch, mid-2012)
[Technical details] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro9, 2
1 2.5 GHz Intel Core i5 CPU: 2 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 378
Video information: ⓘ
Graphics Intel HD 4000
Color LCD 1280 x 800
System software: ⓘ
OS X El Capitan 10.11.6 (15-1004) - time since started: about 7 days
Disk information: ⓘ
Disk0 APPLE drive HARD TOSHIBA MK5065GSXF: (500,11 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Macintosh HD (disk 1) /: 498,88 (Go 298,35 free)
Encrypted AES - XTS unlocked
Storage of carrots: disk0s2 499.25 GB Online
MATSHITADVD-R UJ - 8À8)
USB information: ⓘ
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Information crush: ⓘ
Apple Inc. Thunderbolt_bus.
Goalkeeper: ⓘ
Mac App Store and identified developers
Startup items: ⓘ
HWNetMgr: Path: / Library/StartupItems/HWNetMgr
Startup items are obsolete in OS X Yosemite
Launch system officers: ⓘ
[loaded] 7 tasks Apple
[loading] 149 tasks Apple
[operation] 66 tasks Apple
[killed] 16 tasks Apple
16 killed processes lack of RAM
Demons of launch system: ⓘ
[loaded] 45 tasks Apple
[loading] 143 tasks Apple
[operation] 86 tasks Apple
[killed] 16 tasks Apple
16 killed processes lack of RAM
Launch officers: ⓘ
[performance] HWPortCfg.plist (2015-09-04) [Support]
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a 23d420d.plist (2016-07-11) [Support]
[loading] com.google.keystone.agent.plist (2016-07-12) [Support]
com.oracle.java.Java - Updater.plist [no charge] [Support]
[operation] com.trusteer.rapport.rapportd.plist (2016-07-18) [Support]
[loading] ouc.plist (2015-09-04) [Support]
Launch of the demons: ⓘ
[loading] com.adobe.ARMDC.Communicator.plist (2016-07-11) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-11) [Support]
[loading] com.adobe.fpsaud.plist (2016-08-30) [Support]
[operation] com.backblaze.bzserv.plist (2016-07-11) [Support]
[loading] com.google.keystone.daemon.plist (2016-09-02) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2012-04-02) [Support]
com.oracle.java.Helper - Tool.plist [no charge] [Support]
[loading] com.oracle.java.JavaUpdateHelper.plist (2014-06-09) [Support]
[operation] com.trusteer.rooks.rooksd.plist (2016-07-18) [Support]
Launch User Agents: ⓘ
[failure] com.adobe.ARM. [...]. plist (2013-01-06) [Support]
[operation] com.backblaze.bzbmenu.plist (2016-09-14) [Support]
Internet Plug-ins: ⓘ
FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]
QuickTime Plugin: 7.7.3 (2016-07-09)
AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-14) [Support]
AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-14) [Support]
Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]
Default browser: 601 - SDK 10.11 (2016-07-09)
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-22) [Support]
SharePointBrowserPlugin: 14.6.8 - SDK 10.6 (2016-09-14) [Support]
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
3rd party preference panes: ⓘ
Backblaze Backup (2016-07-11) [Support]
Flash Player (2016-08-30) [Support]
Trusteer Endpoint Protection (2016-07-18) [Support]
Time Machine: ⓘ
Skip system files: No.
Mobile backups: WE
Automatic backup: YES
Volumes to back up:
Macintosh HD: Disc size: 498,88 GB disc used: 200,52 GB
Destinations:
FREECOM HDD [Local]
Total size: 249,72 GB
Total number of backups: 36
An older backup: 10 19, 2015, 23:58
Last backup: 09 17, 2016, 22:59
Backup disk size: too small
Backup size GB 249,72 < (disc 200,52 GB X 3)
Top of page process CPU: ⓘ
29% firefox
6% bzfilelist
4% kernel_task
3% coreaudiod
3% WindowServer
Top of the process of memory: ⓘ
1.58 GB firefox
652 MB kernel_task
Mdworker (11) 123 MB
Skype 82 MB
QuickLookSatellite (3) 57 MB
Information about virtual memory: ⓘ
26 MB of free RAM
3.97 GB used RAM (621 MB Cache)
5.32 GB used Swap
Due to the limitation of memory, memory virtual swap used 5.32 GB which is the main part of the slowness.
It would be better to RAM as soon as possible.
-
Mac pro running very very slow
Hello
I have a Macbook Pro 4 GB of RAM, after 2016-004 mac update, security update is very very slow.
I had downloaded El Capitan, but have not installed. Mac slow start, I installed the Version of El Capitan 10.11.2 running, it took 1.5 days to install, always very slow operation.
Please advise,
Thanking you,
Concerning
Saket
The startup disk may be necessary repair.
Come on in/Applications/Utilities, then start the Disk Utility app.
Select the disk to boot on the left then click the first aid tab, and then click run.
-
my Macbook Pro Very Slow error loading, error, Trackpad trolling Kernel_task bar
HY sorry my bad English...
I searched google but couldn't find a solution... I use macbook pro 2011 13 inch 2, 4 GHz core i5 standard end
Why my macbook pro late the trackpad, kernel task error and loading very slow bar sttartup, but this problem is not in safe mode, with all the normal safe mode
measures have I made:
-change the hard drive
-change the disk sata hard
-battery change
-change the trackpad and trackpad cable
-change the OS 10.6, 10.7 10.10, 10.11
-change model point via
and unresolved problen my macbook very very slow loading bar (it also occurred when I first started by flashdisk and in Setup mode in ulities OSX as a kernel error task late trackpad) sometimes the trunk sometimes will not start and if I change the SID model that works, but when booting from flash for a long time
is there a solution that is more useful? very confused i
0o0o
If it doesn't happen in Mode safe, there is probably a software problem. Can you post an Etrecheck report? http://etrecheck.com/
-
My macbook pro mid-2012 is very slow. Do I need a new battery?
Hello world
Support on this community has helped me tremendously before so I thought I'd post again about a new problem.
I upgraded my Mac with an SSD, which works very well, with more RAM; However, recently, it has been very slow and train, and I don't know why. RAM is not being crazy, so it must be something else.
After reading the other posts, I'm thinking maybe I need a new battery? I mean I have 893 cycles ahah. Could someone help with this?
Here is my log of Etrecheck:
EtreCheck version: 2.9.12 (265)
Report generated 2016-06-07 02:57:40
Download EtreCheck from https://etrecheck.com
Time 01:38
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer is too slow
MacBook Pro (13-inch, mid-2012)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro9, 2
1 2.5 GHz Intel Core i5 CPU: 2 strands
8 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n
Battery: Health = battery check - Cycle count = 893
Graphics Intel HD 4000
Color LCD 1280 x 800
OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour
500 GB SAMSUNG SSD 850 EVO Disk0: (500,11 GB) (Solid State - TRIM: Yes)
EFI (disk0s1) < not mounted >: 210 MB
SAMSUNG SSD 850 EVO 500 G Media (disk0s2) /: 499,11 go-go (287,31 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
MATSHITADVD-R UJ - 8À8)
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Thunderbolt_bus.
/ etc/hosts - number: 20
Any where
/ Library/Extensions
[loading] com.globaldelight.driver.BoomDevice (1.4 - SDK 10.10 - 2016-06-03) [Support]
[loaded] 8 tasks Apple
[loading] 162 tasks Apple
[operation] 68 tasks Apple
[loaded] 47 tasks Apple
[loading] 163 tasks Apple
[operation] 81 tasks Apple
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-12) [Support]
[loading] com.google.keystone.agent.plist (2016-03-02) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2016-05-12) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-12) [Support]
[loading] com.adobe.fpsaud.plist (2016-05-09) [Support]
[loading] com.bombich.ccchelper.plist (2015-11-30) [Support]
[loading] com.google.keystone.daemon.plist (2016-03-02) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2015-01-16) [Support]
[loading] net.freemacsoft.LiteIcon.LIHelperTool.plist (2014-08-26) [Support]
[loading] org.cindori.SenseiTool.plist (2015-12-03) [Support]
[loading] org.cindori.TEAuth.plist (2015-12-03) [Support]
org.eyebeam.SelfControl.plist [no charge] (2016-04-28) [Support]
[failure] com.adobe.ARM. [...]. plist (2016-01-09) [Support]
Workflow application (/ Applications/Flux.app)
PopClip application (/ Applications/PopClip.app)
BetterSnapTool application (/ Applications/BetterSnapTool.app)
Alfred 2 Application (/ Applications/Alfred 2.app)
ClipMenu application (/ Applications/ClipMenu.app)
Decision on application (/ Applications/Hear.app)
Fan of Macs control application (/ Applications/Mac Fan Control.app)
Hocus Focus application (/ Applications/Hocus Focus.app)
[operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper
[ongoing] com.crystalidea.MacsFanControl.60192
[ongoing] com.etresoft.EtreCheck.207712
[ongoing] com.globaldelight.BoomDaemon
[ongoing] com.google.Chrome.163232
[ongoing] com.hegenberg.BetterSnapTool.49632
[ongoing] com.naotaka.ClipMenu.52192
[ongoing] com.pilotmoon.popclip.291872
[operation] com.runningwithcrayons.Alfred - 2.166432
[ongoing] com.uglyapps.HocusFocus.264992
[ongoing] org.herf.Flux.119072
[loading] 412 tasks Apple
[operation] 173 tasks Apple
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-15) [Support]
GameFacePlugin: GameFacePlugin 1.8.0.1 - SDK 10.5 (2012-11-16) [Support]
Unity Web Player: UnityPlayer version 5.0.3f2 - SDK 10.6 (2015-08-04) [Support]
Default browser: 601 - SDK 10.11 (2016-05-17)
AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-11-30) [Support]
FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]
AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
Silverlight: 5.1.30514.0 - SDK 10.6 (2015-11-30) [Support]
QuickTime Plugin: 7.7.3 (2016-05-17)
Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-21) obsolete! Update
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
PepperFlashPlayer: 21.0.0.242 - SDK 10.6 (2016-06-07) [Support]
AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
SharePointBrowserPlugin: 14.4.8 - SDK 10.6 (2015-02-26) [Support]
JavaAppletPlugin: 15.0.1 - SDK 10.11 (2015-11-30) check the version of
samesurf_screenshare_32: Unknown (2014-08-10)
1Password - AgileBits - https://agilebits.com/onepassword (2015-09-10)
AdBlock - BetaFish, Inc. - https://getadblock.com (2015-09-27)
Adblock more - Eyeo GmbH - https://adblockplus.org/ (2015-09-27)
ClickToFlash - Marc Hoyois - http://hoyois.github.com/safariextensions/clicktoplugin/ (2015-08-04)
Hear: 1.1.6 - SDK 10.8 (2014-11-03) [Support]
Flash Player (2016-05-09) [Support]
FUSE for OS X (OSXFUSE) (2015-10-25) [Support]
Mobile backups: OFF
Automatic backup: NON - automatic backup disabled
Volumes to back up:
Destinations:
Seagate 3TO [Local]
Total size: TB 3.00
Total number of backups: 4
An older backup: 2014-12-12, 14:35
Last backup: 2015-11-23, 08:35
Size of backup drive: Excellent
Size of backup 3.00 TB > (disk size 0 B X 3)
67% Google Chrome Helper (6)
37% Google Chrome
6% kernel_task
6% WindowServer
2% PopClip
Top of page process of memory: ⓘ
770 MB Google Chrome Helper (6)
Kernel_task 747 MB
Chrome Google 188 MB
Mdworker (9) 172 MB
Mds_stores 164 MB
4.25 GB free RAM
used 3.75 GB RAM (1.70 GB being cached)
Used Swap 0 B
7 June 2016, 02:50:29 self-test - spent
Hello. Try restarting your Mac.
Try to start:
-Stop your Mac
-Wait until your computer turns off and after that press the power button
-Just after you hear the startup tone, press in and hold the SHIFT key
-Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar
-Once your Mac boot, restart dhcpd as you usually do.
If this does not help, follow the instructions below:
-Stop your Mac
-Wait until your computer turns off and after that press the power button
-Just after you hear the startup tone, press in and hold the SHIFT key
-Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar
-Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)
-Click on the disc to check, then, if requested to solve the problems on the repair disk
-After that click on verify disk permissions, and then click Repair disk permissions
-Once the process is complete, stop your Mac and turn it on again after 30 seconds
Apart from this, take a look at this article from Apple and follow the instructions to reset NVRAM shown here:How to reset the NVRAM on your Mac - Apple Support
Try resetting the system management controller: https://support.apple.com/en-us/HT201295
I also suggest upgrading your RAM.
I hope this helps!
-
Scrolling speed is fine, but when you press the command key and then it becomes very slow.
He does it with a mouse, but not with the trackpad.
It does when the modules are disabled.
No problem on Safari or Chrome.
No problem on PC.I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.
Any help would be much appreciated.
Thanks in advance!
You use the mouse wheel to scroll?
There are some prefs mousewheel, which control the behavior when you press the modifier keys.
You can set the key to the action of each to 0 for normal scroll.See http://kb.mozillazine.org/About:config_entries #Mousewheel.
-
My macbook pro is very slow, and often stuck mode programs "not responding".
MacBook Pro (13-inch, mid-2012)
Intel Core i5 2.5 GHz processor
4 GB DDR3 memory at 100 MHz
500 GB of storage capacity SATA disk
Operating system OS X El Capitan 10.11.3
It is very slow to start, in addition to open programs, for example, Mail, Safari, Word, Adobe Reader. Sometimes it can't even open programs and gets stuck in mode "not responding". I feel like a memory problem.
Download and view a report of Etrecheck:
http://www.etresoft.com/etrecheck
Ciao.
-
Difficulty to access the updates and downloads with very slow wifi ("country"). Is it possible that I can download some updates and new programs using my MaBbook Pro (retina) on a public site in the city and transfer them on my iMac which is too heavy to cart autour?
New programs, Yes.
Updates, depends on what you're updating.
-
New Satellite Pro U400-12y is very slow
Just bought Satellite Pro U400-12y with Vista Business pre-installed (1 GB preinstalled memory).
However, the startup is very slow and actually the computer seems to work in a time warp.Any ideas? Is there a fundamental problem?
Yes, I have an idea.
I think that the high amount of background processes affect the performance of laptops.
He should know that the U400 supports many different features and these features are controlled by different applications.If you want you can start the msconfig and disable some unnecessary and unimportant process. Take a look in the Startup tab.
In addition, I recommend to disable and remove the preinstalled software called Tempro.
I did it on my system, and now it runs much faster
-
Satellite Pro M70-113: modem - very slow
Hello
I have a toshiba satellite pro m70-113 laptop. I bought it in Saudi Arabia, Riyadh.
The problem is that when I use the modem (dialup) software from toshiba to connect to internet... the connection is very very slow... While on the same line, on my desk speed isn't a problem... on average, I get 1/4th of the speed I get on my desk... and on the same telephone line...
What is the problem?
Can someone help me in this... are there any configuration software that can fix this problem?
Help will be very appreciated...
Thank you.
Hello
I don't know what your desktop device modem, but modems takes care of different speeds.
You can also check the properties of the modem for laptop.
Go to the Toshiba software modem properties and check under the tab "modem".
You will find the maximum port speed. This should be set to the highest value.It is also possible that different providers use a different speed of data transmission.
Some time ago I used a modem and I was very surprised that my speed of data transmission is different on the different suppliers.
As you can see there are many factors why you don? t get the same speed of modem. -
My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly
You can try this download. Etrecheck. https://etrecheck.com/#about
Then publish the report as a reply in this thread.
It will allow us to review your system without disclosing a private matter.
-
Satellite Pro U300 very slow opening programs
Hi all
I bought a Satellite Pro U300 in February 2008 and I only use it 3 - 4 times since then... It is very slow at the opening of the programs (I have only one statistical program installed) and Web pages and creates problems when I try to download other programs that have a different version of Windows Vista.
I really regretted buying this phone and I'm looking for someone to sell.Until I do, I was wondering if I could uninstall Windows Vista and install Windows XP for example, or do anything else that would make my phone fun to use.
Anna
Hello
The preinstalled operating system ran slowly because many applications are running in the background.
My laptop was slow too to experience of applications have been disabled.You can disable in MSCONFIG.
Type msconfig window RUN and check the Startup tab.
You will find the software that could slow down the operating system.With regard to the installation of Win XP.
Yes, you can also install Win XP. By using the Win XP laptop should be little faster because Win XP doesn t need a lot of material resources.Welcome them
Maybe you are looking for
-
where the history icon
-
UJ-840 CDROM in a Qosmio F20 years does not correctly read the media
Hi people,I m getting desperate now! Have a dissitation I need to access with a cdrom (UJ - 840 years) on a Qosmio F20 running Windows Vista Ultimate.A message says that it is not connected, even if it will read CDs. Can someone help please. When I i
-
Lenovo Veriface recognition software problem
I was interested by the use of Lenovo Veriface recognition software on my laptop Ideapad P500. I installed and fits in an image of face. I've been dying to test... But there was a problem. When I went to the lock screen, Veriface window appeared. I w
-
My iPhone only more 6 does not ring when called.
MY 6plus of the iPhone does not ring when called. Any suggestions?
-
Random blue frames on restart-DPC_WATCHDOG_VIOLATION 'code 0 x 00000133 '.
Random blue frames on reboot. Any driver could not be found, and I can't find what the hardware could be the cause of the problem. code 0 x 00000133 (0 x 0000000000000283, 0 x 0000000000000282, 0 x 0000000000000000, 0 x 0000000000000000) So far, hav