Yoga 2 Pro - very slow Wifi, ~0.74Mbps - 3Mbps

Similar Questions

• Yoga 3 Pro - very slow WIFI speed

  http://www.Speedtest.NET/my-result/4189241636

  I get about 15-17mbit on my 3 Yoga and my other laptop is 50mbit all the time, what is the problem? I did all the updates. My Wifi adapter is the current version of the driver Broadcom 802.11ac 6.35.223.2

  Found a fix. In my router settings I had to enable WMM

  http://www.Speedtest.NET/my-result/4190547530

• my Macbook Pro Very Slow error loading, error, Trackpad trolling Kernel_task bar

  HY sorry my bad English...

  I searched google but couldn't find a solution... I use macbook pro 2011 13 inch 2, 4 GHz core i5 standard end

  Why my macbook pro late the trackpad, kernel task error and loading very slow bar sttartup, but this problem is not in safe mode, with all the normal safe mode

  measures have I made:

  -change the hard drive

  -change the disk sata hard

  -battery change

  -change the trackpad and trackpad cable

  -change the OS 10.6, 10.7 10.10, 10.11

  -change model point via

  and unresolved problen my macbook very very slow loading bar (it also occurred when I first started by flashdisk and in Setup mode in ulities OSX as a kernel error task late trackpad) sometimes the trunk sometimes will not start and if I change the SID model that works, but when booting from flash for a long time

  is there a solution that is more useful? very confused i

  0o0o

  If it doesn't happen in Mode safe, there is probably a software problem. Can you post an Etrecheck report? http://etrecheck.com/

• Mac book pro very slow el capitan

  Hello

  my MacBook Pro is very slow. It freezes sometimes and I'm SBBOD much. I have not installed mac guardian or such, and I have read and followed these instructions: How to eliminate the problems of slow Mac

  Here is my EtreCheck report:

  EtreCheck version: 2.6.6 (226)

  Generated report 02.01.16, 14:48

  Duration 37:04

  Download http://etrecheck.com EtreCheck

  Hardware information: (does that mean?)

  MacBook Pro (13-inch, mid-2012)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  8 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 390 - SN = W043115GLD3LC

  Information about this video: (does that mean?)

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software system: (does that mean?)

  OS X El Capitan 10.11.2 15 c (50) - since the start time: about an hour

  Disk information: (does that mean?)

  Disk0 APPLE drive HARD TOSHIBA MK5065GSXF: (500,11 GB) (rotation)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  + # (disk 1) /: 498,88 go-go (416,04 free)

  Storage of carrots: disk0s2 499.25 GB Online

  HL-DT-ST DVD - RW GS31N)

  USB information: (what does this mean?)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Lightning information: (does that mean?)

  Apple Inc. Thunderbolt_bus.

  Guardian: (what does this mean?)

  Mac App Store and identified developers

  Launch officers: (does that mean?)

  [loading] com.divx.dms.agent.plist [click here for support]

  [loading] com.divx.update.agent.plist [click here for support]

  [loading] com.oracle.java.Java - Updater.plist [click here for support]

  Demons of launch: (does that mean?)

  [loading] com.adobe.fpsaud.plist [click here for support]

  [loading] com.microsoft.office.licensing.helper.plist [click here for support]

  [loading] com.oracle.java.Helper - Tool.plist [click here for support]

  [loading] com.sonos.smbbump.plist [click here for support]

  Launch User Agents: (does that mean?)

  [loading] com.google.keystone.agent.plist [click here for support]

  User Login items: (does that mean?)

  Plex Media Server program (/ Applications/Plex Media.app)

  Other applications: (does that mean?)

  [ongoing] com.etresoft.EtreCheck.121632

  [ongoing] org.Mozilla.Firefox.48352

  Internet Plug-ins: (does that mean?)

  OVSHelper: Version: 1.1 [click here for support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 3.0.0.126 - 10.8 SDK [click here for support]

  DivX more Web Player: Version: 2.3 - SDK 10.5 [click here for support]

  AdobePDFViewerNPAPI: Version: 11.0.13 - 10.6 SDK [click here for support]

  FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [click here for support]

  Silverlight: Version: 5.1.20913.0 - 10.6 SDK [click here for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.267 - 10.6 SDK [click here for support]

  SharePointBrowserPlugin: Version: 14.5.9 - 10.6 SDK [click here for support]

  AdobePDFViewer: Version: 11.0.13 - 10.6 SDK [click here for support]

  JavaAppletPlugin: Version: version check Java 8 66 17 construction update

  Safari extensions: (what does this mean?)

  Adblock more

  3rd party sous-fenêtres preferences: (does that mean?)

  Flash Player [click here for support]

  Flip4Mac WMV [click here for support]

  Java [click here to support]

  Time Machine: (what does this mean?)

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  + #: Disc size: 498,88 GB disc used: 82,84 GB

  Destinations:

  TimeMachine [network]

  Total size: 3.97 TB

  Total number of backups: 16

  An older backup: 26.12.15, 15:33

  Last backup: 01.01.16, 19:38

  Size of backup drive: Excellent

  Backup TB 3.97 size > (disk size 498,88 GB X 3)

  Top of page process CPU: (does that mean?)

  5% WindowServer

  kernel_task 2%

  0% cloudpaird

  Top of the process of memory: (does that mean?)

  786 MB com.apple.WebKit.WebContent

  724 MB kernel_task

  Firefox 598 MB

  Safari of 246 MB

  ITunes 238 MB

  Virtual memory information: (does that mean?)

  2.12 GB of free RAM

  5.88 used GB RAM (2.59 GB being cached)

  Used Swap 0 B

  Diagnostic information: (does that mean?)

  2 January 2016, 13:02:17 test - passed

  Thanks for your help

  Benni

  Contrary to what you read, displaying stuff "etrecheck" this site is not the right way to get help.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Very slow WiFi on the 3G xoom with update 3.2

  Hi all

  Was wondering if anyone else has the same problem.

  I bought the unit a few days before and same day updated to Android 3.2 version. I use internet on my Wifi at home and have a Netgear - WGR614 router. Browsing speed is very very slow and do not open many of the sites.

  The intensity of the signal on the xoom is - (asu 3-105 DBM).

  Is this a problem with the Android 3.2 update or my wifi at home is low? I was able to reset the tab to the original version?

  any help is very appreciated.

  

• PR CC Pro very slow on the new custom build and lag?

  I just finished my new workstation of the construction and the first port of call was the first Pro CC installation! This version was specially designed for video editing, but I'm sad to discover that Premiere Pro is very slow and laggy. There is a lag when you click too quickly, clicking on between lag and the causes of windows (mixer audio/source/effects clip) a shift and the new window takes a second to load if you scroll down. The report is the biggest problem it will take A long TIME!

  When rendering I noticed that my CPU uses only 40 to 50%. I don't know if this is normal. If someone could help me use my material, I would be very grateful!

  I tested Premiere Pro using some HD footage that I ripped off of YouTube. Acceleration GPU of Mercury Playback Engine is selected.

  PCPartPicker list of the part: http://UK.pcpartpicker.com/p/jhCnrH

  Processor: Intel Core i7 - 5820 K 3.3 GHz 6 - Core Processor

  CPU cooler: Noctua NH - D15 CFM 82.5 CPU Cooler

  Motherboard: Asus X 99 - PRO LGA2011 - 3 motherboard ATX

  Memory: DDR4-2133 Crucial 32 GB memory (4 x 8 GB)

  Storage: Samsung 850 EVO-Series 250GB 2.5 "Solid State Drive

  Storage: Internal Western Digital BLACK SERIES 1 TB 3.5 "7200 RPM hard drive

  Storage: Internal Western Digital BLACK SERIES 2 TB 3.5 "7200 RPM hard drive

  Video card: EVGA GeForce GTX 970 4 GB SSC ACX 2.0 video card

  Case: Fractal Design Define R5 (black) ATX Mid Tower Case

  Power supply: XFX XTR 750W 80 + Gold Certified fully modular ATX power supply

  Operating system: Microsoft Windows 8.1 (OEM) (64-bit)

  Case fan: Noctua NF - A14 PWM 82.5 CFM 140mm fan

  Monitor: Dell U2515H 60 Hz 25.0 "monitor

  Could be. Or could with this material, you need different settings.

  I have a new machine and the manufacturer has played with a lot of things... it is Variant Canyon one hell 4-core i7, primary core @ 4.6Gzh, other three to 3.5 Ghz, fsb too clocked at 166 Mhz and curiously, RAM & the three slowest nuclei have been slightly underclocked due to the way which they interface actually more quickly with these settings. By report to my previous machine, also a 4-core, it's SMOKING. On first commissioning with everything to 'standard' settings, it is faster but not Mary. At the time where he played with the settings, wowie... just kazowie note the difference in performance with changing parameters, you can re - think about the configuration of your machine. Although, of course, you can correct that there is a problem in a hardware store.

  More on the page of the Tweaker is discussed for the fsb, CPU, and frequencies RAM shook everything to get as much flow. There are things like that that can make a huge difference in performance.

  At this point, I can't emphasize too much on using the test on the page of the Tweaker to see where you machine is doing well and where it chokes... the test is a folder compressed with a file media & project plus a logging program. You extract all, install the deposit return program on your machine, import the project into PrPro with his single on the chronology of 30 seconds and run an export. The sequence specifically chose the applied effects so that every bit of material are in tatters on... CPU, RAM, GPU, fsb and disk read/write. You download the results of the logging program and to obtain an accurate statement of how perform every part of your machine. This would probably tell you more than anything else right now.

  Neil

  Page of Tweaker...

  http://ppbm7.com/index.php/tweakers-page

• Very slow WiFi

  For about a month now, our wi - fi is very slow and make it worse. We noticed it on our iPhones and iPads in particular. I use an Apple's Time Capsule airport for my network and we have internet optical fiber to 100 MB, so not needed or used modem. Wired devices are as fast as lightning, but wi - fi is now almost unusable. Xfinity speed test shows the download speeds of 200 MBS on the wired devices.

  I rebooted my router Airport and no change. I use also 3 extensions Apple Airport.

  Any suggestion would be appreciated.

  Try to restore your device to factory settings. Take a look this Apple Support article:use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  If this is not enough, try recovery mode. Turn off your idevice to reset and then connect it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

• Satellite Pro P300 - very slow WiFi connection

  Toshibe Satellite Pro P300 with built in the Atheros AR9281 wireless.

  Running Windows 7.

  ESET NOD32 Antivirus.

  BIOS 2.5

  All the latest versions of the drivers installed including the driver Atheros 8.0.0.225.0 wireless.

  Wireless is annoying...

  Sometimes fails to find the router (Belkin 54g, connected to the Modem cable Motorola (Virgin B/B is the access provider, 10 Mbps)).

  When he finds, connects ok, but sometimes it is impossible to browse web pages - just behave as if there is no connection.

  Bit torrent works also very slowly (in general 0.5Mbit / s depending on the number of peers etc.). Not a port forwarding issue with the router - using utorrent that indicates that the relevant port is open.

  When I connect to the router with an ethernet cable, everything works a treat - much faster and rock solid connection. uTorrent has no hit 10Mbit/s problem at all.

  Any suggestions?

  Thank you very much...

  Alan.

  Hello

  You should first check if your BIOS is up to date.
  If an older version of BIOS is installed then you could update the BIOS.

  It is also advisable to update the installed WLan driver.
  Here, you can check the available WLan drivers:
  http://APS2.toshiba-tro.de/WLAN/

  See you soon

• MacBook Pro very slow / EtreCheck report available

  Hello!

  For awhile, my Mac is really slow. It takes about 2 minutes to start, apps are returned for e period very extended before the launching and execution is really slow at all. I reinstalled the OS El Capitan several times, but it's not help. The SMC thing has also been reset. So today, I found this app that checks to see what is happening to your Mac and reports that information but I don't understand anything except that the performance is poor.

  Here's the report:

  EtreCheck version: 3.0.3 (307)

  Report generated 2016-09-02 11:52:18

  Download EtreCheck from https://etrecheck.com

  Duration 14:58

  Performance: Poor

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.9 GHz Intel Core i7 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 154

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.6 15G (31) - since startup time: less than an hour

  Disc information: ⓘ

  APPLE HDD HTS547575A9E384 Disk0: (750,16 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 748,93 go-go (519,29 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 749.30 GB Online

  HL-DT-ST DVD - RW GS31N)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Configuration files: ⓘ

  / etc/hosts - number: 2

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  Apple 151 [loading] tasks

  Apple 80 [performance] tasks

  Launch system demons: ⓘ

  [no charge] 47 Apple jobs

  [loading] 159 jobs Apple

  Apple 85 [performance] tasks

  Launch officers: ⓘ

  [loaded] com.adobe.AAM.Updater - 1.0.plist (2016-06-02) [Support]

  com.Amazon.sendtokindle.Launcher.plist [running] (2015-11-14) [Support]

  [loading] com.oracle.java.Java - Updater.plist (05 / 05/2016) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist (2016-06-02) [Support]

  com.Adobe.agsservice.plist [running] (2016-08-14) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (05 / 05/2016) [Support]

  [loading] com.tunnelbear.mac.tbeard.plist (2016-03-13) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2016-06-02) [Support]

  [loading] com.bittorrent.uTorrent.plist (2016-04-03)

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  com.spotify.webhelper.plist [running] (2016-09-02) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Backup Photos from Google application (/ Applications/Google Photos Backup.app)

  Plug-ins Internet: ⓘ

  Default browser: 601 - SDK 10.11 (2016-07-27)

  QuickTime Plugin: 7.7.3 (2016-07-27)

  JavaAppletPlugin: Java 8 update 101 build 13 (2016-07-29) check the version of

  Safari extensions: ⓘ

  Adblock more - Eyeo GmbH - https://adblockplus.org/ (2016-07-21)

  3rd party preference panes: ⓘ

  Java (2016-07-29) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  7% com.apple.WebKit.WebContent (21)

  5% WindowServer

  4% kernel_task

  Backup of Photos Google 1%

  1% com.apple.WebKit.Networking

  Top of page process of memory: ⓘ

  4.35 GB com.apple.WebKit.WebContent (21)

  611 MB kernel_task

  Mdworker (20) 311 MB

  Safari of 254 MB

  System_profiler 172 MB

  Virtual memory information: ⓘ

  51 MB free RAM

  used 7.95 GB RAM (1.22 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  Sep 2, 2016, 11:21:47 test - passed

  I would be so happy if someone can help me solve this mess.

  Rid the MBP of the torrent application.  It has an excellent vehicle to introduce malicious software on a Mac.

  Start the recovery partition and select in menu 4 disk utility.  Run disk utility > first aid > repair.

  Ciao.

• WRT160N very slow wifi compare to wired

  Hey guys thanks for the help on this one.

  The answer could be as simple as: get a new router. but lets give it a try. I have read many many post about how to optimize the speed of the router, but none has worked so far.

  I had a large wired Internet connection that strikes between 45 and 60 MB/s

  http://www.Speedtest.net/result/2029093668.PNG

  wifi is crazy slow on Macbook pro, Iphone and iPad stay between 3 and 8 Mbps...

  I tried to change all of the specs, did the firmware update...

  is there a configuration perfect with the new firmware?

  Let me know because now, I am naïve and I can't find anything else on the web

  See you soon

  Jeff

  You try the following settings:

  # Open the browser and in the address bar type 192.168.1.1 which will open the gateway configuration page.

  # Bring back the MTU (Maximum Transmission Unit) of 1500 to 1400 or less (usually located on your main configuration page / database routers). Here is the link to determine and implement the right size MTU: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re...

  # Make that channel 1, 3, 6, 9, 11...

  Settings wireless #Adjust the following:

  ~ ~ Reduced from 100 to 75 beacon interval

  ~ ~ Lower the threshold of fragmentation of 2346 to 2306

  ~ ~ Lower 2347 to 2307 RTS threshold

  Then check the status of the connectivity.

• MacBook Pro very slow...

  I ran out of Apple Care and I need a cleaning of...

  Is there a site where I can go and learn to less than the files to remove to clean my Mac Book Pro slow?

  Thank you

  Patti Painter

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• WNDR3700 very slow wifi

  Seems all of a sudden that my wireless is slow and weak.

  I get download speeds of 60 Mbit/s connected to the desktop via the router, but only about 10 with wifi. Router is 2pi away.

  I looked in the settings and tried a few things but no help at all. Hope someone has some ideas, thanks

  I did download speed tests using residential Road Runners speed test. Only 10 Mbps over 60 wired wireless

  This is a problem that happens all of a sudden.

  Did a reset and still poor wireless network. Tried to change channels once or twice as suggested on various sites. No effect at all. Cell phones would connect only barely 3 ft away from the modem. I think it is just wore out

  Purchased a new WNDR4300 and works perfectly out of the box

• New HP Envy M6 only detect ethernet cable, very slow wifi

  Hello

  Sometimes, the wifi, I get 1mpbs on a 50mpps connection. I'll upload to 5 Mbps, which is normal (but why are my download speeds so slow?) Laptops and other devices work perfectly. Closer to my wireless router (well it's not a router, it is a TG862 of Arris Comcast) seems to alleviate the problem, but... I am no farther than 25 feet away from him in my room!

  I tried to solve this problem by updating the BIOS and the driver Qualcomm Atheros 9485 and apparently not helped at all.

  My concern REALLY, it's THAT EVERYTHING, nothing happens when I plug my ethernet cable into the left side of my laptop. It is in the correct port. It works fine in my xbox, my other laptop and my desktop computer. Other ethernet cables do not work or the other. I noticed there are two holes (which resemble lights) that don't light up, right where I plug the Ethernet cable.

  http://support.HP.com/us-en/document/c03363657

  I followed these instructions piece by piece without success.

  Should I have a burst network card? Help, please! This notebook is so new and brilliant, my other is old and destroyed and won't even take a load! I greatly appreciate it.

  Michael Siraco

  Hello Dollarsignrack,

  You have a problem with your network connection.

  It could be a defective material you may be substituted.

  First, turn off the computer.
  That you put it on press the F10 key. This will load the BIOS setup utility.
  Press F9 to load the default values.
  Press F10 to save and exit.

  This should help to detect the Ethernet port.
  When the computer starts up, check if everything is working.

  If it is still slow to go to HP.com and update the BIOS and software framework.

  Here are links to the updates.

  BIOS

  Software structure

  If you do not need to have the unit repaired.

  Here is a link to the phone number that you can call to HP.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• MS Windows XP Pro very slow after installing updates

  I have a computer that is running Windows XP pro. I put it to download updates but the choose me when to install updates. After installing some updates, the computer became so slow - especially during the same thaat start move the cursor of the mouse became a problem. Even the sound of windows when loging in is just sounds bad. This is the second time its happening. the first time that I had to format the hard drive and install windows again & evderything worked well until after the updates. I can't say what update is the cause of the problem, but am sure the problem is with some windows update. Any help will be greatly appreciated because I don't want to format the computer again, because later the question will come again unless I have disable windows update and live with the consequences.

  "Goodan" wrote in message News: fbfe2d05-1824-49da-a18a-0103bbc85001...

  I have a computer that is running Windows XP pro. I put it to download updates but the choose me when to install updates. After installing some updates, the computer became so slow - especially during the same thaat start move the cursor of the mouse became a problem. Even the sound of windows when loging in is just sounds bad. This is the second time its happening. the first time that I had to format the hard drive and install windows again & evderything worked well until after the updates. I can't say what update is the cause of the problem, but am sure the problem is with some windows update. Any help will be greatly appreciated because I don't want to format the computer again, because later the question will come again unless I have disable windows update and live with the consequences.

  Usually, I found that this happens when installing .NET updates - if you give the machine 20 or so minutes to regroup and then restart, the problem disappears usually.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• 2012 MacBook Pro VERY slow after restoring from time machine

  Recently, I upgraded my hard drive on a seagate drive. I went from 500 GB to 1 TB. The installation went well. Later, I followed the steps to set up the hard drive:

  1. start the computer by using the R command

  2. open disk utility

  3. formatting the new hard disk by the computer specifications

  4 closed disk utility

  Then I restored from a time machine to the top. It took about 3 hours I had about 350 GB of data to restore. Since that time, my computer is moving very slowly! For example, the start-up takes at least 15 minutes for loading applications. Between the tabs in Chrome takes about 45 seconds to a minute. Loading a new web page takes about 3 minutes or more. Open an application like Evernote can take 5-8 minutes. Same shutdown takes about 10 minutes.

  In a previous forum, someone suggested to take a look at errors in the console. I have no idea what it means. Can someone help me figure out what this topic?

  Here is example of them below:

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Automator.app/Contents/MacOS/Automator file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-file data/Applications/App Store.app / happy

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading of files-data Applications/App Store.app/Contents/MacOS/App Store

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app/Contents file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data file Store.app/Contents/MacOS/App Applications/App Store /... namedfork/rsrc

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app/Contents/MacOS/Calculator file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-file data/Applications/App Store.app

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-file data/Applications/App Store.app / happy

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-Applications/Calculator.app/Contents/MacOS/Calculator/... namedfork/rsrc file data

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-file data/Applications/App Store.app

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app/Contents file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading of files-data Applications/App Store.app/Contents/MacOS/App Store

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-file data/Applications/App Store.app/Contents/PlugIns

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app/Contents/MacOS/Calculator file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calculator.app/Contents/PlugIns file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app/Contents file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app/Contents/MacOS/Automator file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-Applications/Automator.app/Contents/MacOS/Automator/... namedfork/rsrc file data

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app/Contents file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calendar.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calendar.app/Contents file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (262) deny (1) - reading-data /Applications/Automator.app/Contents/MacOS/Automator file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-data /Applications/Calendar.app/Contents/MacOS/Calendar file

  27/07/16 12:24:21.000 PM kernel [0]: sandbox: mdworker (261) deny (1) - reading-Applications/Calendar.app/Contents/MacOS/Calendar/... namedfork/rsrc file data

  If you haven't done so already, please try first this simple step .