ACS 5.0 groups and AD

Similar Questions

• ACS 4.2 Wired and wireless group mapping

  Hello

  User1 connects to the switch, it belongs to the Group AD Domain_user and are mapped to ACS Group1 wich send the radius attribute to change the VLAN, this part works fine.

  My problem is when the same user connects with its wifi card... He is still part of the domain_user and get still mapped to group1 on acs but now, RADIUS values are bad for the wireless.

  Wired production vlan = 20

  Prod wireless vlan = 120

  What I want to do, it is something like:

  ADGroupX Connect_type plus ACS Group1

  ADGroupX + Connect_type2 = ACS group2

  I tried to use the connection profile but the group mapping are not performed at this level. Ditto for NAR, my user must be able to log user wired or wireless and get the right vlan not get restricted by the NAR.

  Another way would be to set up a username/password wireless on the internal database and add it to the ACS group good but which involve password management and not all client 802 support auth password (without user intervention)

  Any idea?

  Hi... this scenario is exactly what network access profiles are designed to address. Essentially, NAP to create a complete configuration based on network service.

  So default ACS is a unique system of NAP (well I guess that 2 If you include RADIUS, and GANYMEDE) where any network service all RADIUS users would assume to use a single device type. NAP allows you to configure a service, the authentication, the mappings of groups and permissions Protocol.

  The first part of the PAN you have to differentiate requests for authentication for each network service. This could be as easy to use the ip address of the AAA Client or NDG. If this is not possible, you can start looking at the attributes in the RADIUS request to find the attribute values that are unique to the switch or wlan.

  Assuming you have managed to do is a matter of implementation of authenticattion and authorization policies-, but the main thing is that you will be able to send any returns RADIUS attributes to the device for the same user.

  The user interface can take a little usual, then read the docs online and stick to it!

  www.extraxi.com for all your reports ACS needs

• New for mapping SSL VPN ACS ASA - ASA groups

  Greetings,

  I am new to ASA, so any help is greatly appreciated.

  I just installed and installed an ASA 5520. I installed an SSL VPN. What I'm trying to achieve is to configure profiles of different groups and different users can access various resources when they access the VPN.

  Current config-

  ASA 5520 v8.3

  ACS 4.0

  Field of Windwos 2003

  I have different installation profiles in the ASA. (i.e. business Dept.) When I choose in the drop down menu, it allows me to open a session and displays the options I've chosen for this group. The problem is that I can connect in this group with any account. GBA, all windows domain users are in the default group. I guess the default group is being processed and which has hosted and user logon.

  Can anyone provide a good article or tips on how to configure the ASA and the ACS for several groups of users. We have several departments that will have to get the parameters when they connect. The ACS groups are mapped to the Windows groups that correspond to each Department

  Any help is greatly appreciated.

  Thank you

  Tim

  Hello

  I think that you need to activate locking group.

  In order to configure Group locking, send group policy name in the attribute class 25 on the Authentication Dial - In User Service (RADIUS Remote) server and choose the group to lock the user in policy.  For example, to lock the user 123 of Cisco in the RemoteGroup group, define the class of attributes 25 Internet Engineering Task Force (IETF) UO = RemotePolicy; for this user on the RADIUS server.

• Problem of GANYMEDE ACS 4.2 NDG and shell permission sets

  Hi all

  I am trying to solve this problem without success so far. I have fresh GBA 4.2.15 patch 5 ACS installation and I am tryng to deploy to our environment. So I configured a 2960 S to be my test client and everything works well. Problem is when I try to create strategies to fine grains using groups of network devices and shell permission sets.

  I created called ReadOnly and FullAccess authorization of shell games. I also created NDG called FloorSwitches and added my 2960. I have 2 groups of users called FloorSwitchesReadOnly and FloorSwithcesFullAccess. Now, if I have set up a FloorSwitchesFullAccess group and assign the set of permission controls Shell by NDG and then log in to the switch, all my orders are rejected as unauthorized.

  One thing I noticed, is that if I give the command shell permission set it to any device (in the settings of user group) works fine. Or if I create binding with DEFAULT NDG to the Group of users that works too. My conclusion is therefore that the ACS for some reason any does not associate my passage to correct group but is instead the DEFAULT group for some reason any.

  Someone at - it had the similar problem, or is there something I'm doing wrong? Is there another way to achieve such a thing without use of NDG?

  Thank you all...

  Please upgrade to patch 6, there is a bug in the patch 5 and you can see the release notes or the Readme for more information.

  Which is the user setting on while you test command authorization, do you have it set on the group setting?

  Thank you

  Tarik Admani

• Why Firefox keep save my last sites traveled as a group and then open this group when I start next time? It will not stop, and I get really mad

  Every time I close Firefox and I have a tab open, it records the tab as if I had recorded as a group and it opens the next time I start firefox again.

  You can check the startup parameter:

  • Tools > Options > general > startup: 'When Firefox starts': 'Show my home page' "show a blank page.

• I followed some groups and contributors

  But did not get any updates by email all weekend.

  Change something?

  Thank you!

  Holly

  Make sure that you always follow these groups and that it contributes.  Over the years, I found that from time to time the forum destroyed my following, and I need to re - follow the things that I'm interested.

  I don't know if that's a problem, or if there is a way to ensure that the user is always really interested in getting these emails, and if they aren't, it will reduce the number of servers forum need to send emails.  TOTAL speculation on my part, but it happened to me several times since 2005 when I began to participate in the forums.

• Added properties (Group and channel) are not a numeric data type.

  I use a use to add two groups and channel custom properties. The properties are text and digital, double and whole.

  When I create a request in the browser, I selects the custom using the drop-down list property, but has only the drop operator "=" or "<>". "" The property is displayed in the data portal is a number of float. I had this problem when I was adding properties custom by using a script. I then tried "Navigatorinstallation / my Index DataFinder/Reset/Reset", then repopulated my search box, using the use on my raw data files. At this point, all the properties of my have only the "=" or "<>" choice of operator in the query.

  It seems that my properties are digital in the data portal, but the the query string of the browser.

  Thanks in advance,

  Hi Bill,

  You don't have to delete the files.  Choose the NAVIGATOR menu "settings > My DataFinder > reset... '. "can clilck on the UPPER part of the two buttons, one called"reset the index.  Which will remove all records in database and re-index all of your data files.  If you one of these properties have already optimized, set their State not optimized before resetting the index, otherwise the optimized property data types will persist.

  If this does not help, then the problem could be in the use that you use.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How do you find the name of the Group and channel your TDMS file name?

  How do you find the name of the Group and channel your TDMS file name?

  Nevermind, I've used the file viewer.

• Major difference between the Group and the organizational unit?

  Pls explain me what is the difference between the groups and the organization unit in simple terms with an example in real time.

  Hello

  https://en.Wikipedia.org/wiki/Organizational_unit _ (computing)

  https://en.Wikipedia.org/wiki/Group _ (computing)

  See you soon.

• How to remove messages in Exchange 2010 by dates. in a group and exclude the Contacts, record retention and calendar

  How to remove messages in Exchange 2010 by dates.  in a group and exclude the Contacts, record retention and calendar.

  I'm deleting emails from users in a group called MX_Purge file. I need to delete the emails date xx/xx/xxxx to xx/xx/xxxx.

  I also need to exclude the excluded the following records 'calendars' folders 'Contacts' and 'Retention '.

  The server people hang around more in the TechNet forums, if you ask, you will get a much better response:

  http://social.technet.Microsoft.com/forums/en-us/Exchange2010/threads

• user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  WinXP
  user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  I did a gpupdate/force and restart twice PC
  Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all users

  Hi elena_ad,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/winserverManagement/threads

• What support DH Cisco ASA 14 group and more

  What support DH Cisco ASA 14 group and more.

  Model and IOS

  Hi John,.

  You must have ASA executes code 9.1 and above for DH group 14 and this only work for ikev2 only.

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• WLC4402, SSC 4.0, EAP FAST with ACS 4.1.23 and Active Directory

  Hi all

  I have a problem where my client software SSC (Cisco Secure Services)-wireless on laptops don't will authenticate the windows domain users if they enter the user name and passwords manually. The unique signature feature will not work. I am using EAP-FAST. It is an ACS appliance based server that I restored from the recovery CD.

  When I look at the failure of authentication request I can see that she is trying to send [email protected] / * / during an attempt to SSO on. The log shows that it is a bad user name or password. Note that the end of the domain name is missing.

  I can see the authentication attempt in the log of the remote agent (CSWINagent.log) on the domain controller, so I don't know that it sends the connection request to the domain controller. The Remote Agent is the same version as the ACS server. When I authenticate successfully (manually) it sends not the domain part of the user.

  This is a new installation. Initially, I had 2 remote agents, both on the service domain controllers has been run under an account with sufficient privileges windows domain administrator. After a planned turn off weekend windows authentication has stopped working completely. I found a post in this forum that says to use the local system to start the remote agent service. This led windows authentication to life, but now I have this problem. I don't know that until I changed it the manual connection is also required in domain (IE user domain\username). I can't be sure that this is the case!

  Can anyone help me to get windows AD to accept these credentials, because they are sent to the client connection? Otherwise if I can make it work with the user account, he worked with initially then that would be great.

  Thank you very much

  As you mentioned that SSC transmits the username "[email protected] / * /" in SSO.

  Is what I think for the moment, to use the feature of Distribution of Proxy on ACS.

  that is, demand to come as it is "[email protected] / * /', let's make ACS Stip off"@domaine"and"username"to RA for AD verification."

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/user/NetCfg.html#wp342969

  After stripping '@domaine' send the request back to the ACS it itself, i.e. in the column forward to, ensure that we have input of the ACS.

  And let me know if it works for you?

  Kind regards

  Prem

• Several open BBM BBM groups and message being deleted

  Hello all: I've recently updated my BB Bold 9900 at a new classic. I made the switch of the device and my three BBM groups transferred nicely. After a week of use, no problem.

  Recently, in the last 7 days, I noticed my self-suppression cats when I have more than one group of ongoing discussion.

  Then, with two or more BBM group discussion going, I will get a notification in the HUB that someone sent a message. I can see the preview in the HUB. I touch the notification in the HUB, and it opens the BBM "app." As soon as it opens I see quickly the cat disappear, as well as any history behind it.

  If I get a notification and I go to the BBM app directly, sometimes the cat is there and sometimes the cat is deleted. I put the story for all the conversations of "forever".

  EDIT: Don't know if this helps, but some of the participants in the group the cats are on iPhone and/or device Samsung Galaxy.

  Has anyone else had this happen to them and if so, is there a solution?

  Thank you

  G.

  Make another person in the Group and the administrator and then it prompts you to come back and make you an administrator once they invite you to come back. Everything will remove and then Resync.

• Trunk group and hunt inter-classes CUCM

  Hello

  I think I have some notion about what I have to do to get what I want to do, but it's always a good idea to get your expert advise to validate my plan.

  I have two clusters of CUCM 10.5 standalone. We have VPN connectivity between these sites. Site A has a group with call of broadcast distribution. If nobody takes the call, he goes to voicemail. Now my management wants to add an extension of Site B in this group of hunting, there will be a distribution more call coverage or load. My thought is to create ICT between the two groups and add the extension of site B in the hunting group. Is there another better way? Do I have to create a trunk of ICT? I need to make sure that the call goes to voicemail if no one picks up the call. Thank you for your help on this.

  ~ Khanal

  No, when you go to the Group of curves, you will notice the only things that you can add is a real number of directory. If the requirement is ring let simultaneously or circular between local cluster DN then build a ling group for it and then the backup is another cluster DN, DN build with single number reach destination pointing to the other cluster and then build the second group of line with this unique name. In your list of hunting point to two groups of line.