ACS 5.6: Problem with deleting a file via cli

Similar Questions

• problem with deleting some files

  I was download 2012 of Bitdefender total security, then there some proplem with windows 7 x 64, then I was the Help Center contact to resolve problems and they put some files in my computer, but it did not work well and 1 week before I changed my Bitdefender to another title but the files still in my computer and when I want to delete files that are open in the other program says you can not remove This

  Hello

  The ntuser.dat files should not be deleted - it is where Windows stores the data of register etc.  These files are normally hidden, so it would be better to return to that State.  To do so, right click on each file in turn, select Properties, click the hidden check box, and then click on apply to save the change.

  Kind regards

  DP - K

• Problem with deleting a file PDF

  When I try to delete a PDF file, it tells me that the file cannot be deleted because it is open, it is not.  I can't find a way around it.

  If you use Windows Explorer to navigate to the file and delete it from there, you may need to disable the preview of the file if it is enabled.

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• problems with. ARW files and invigorating auto

  problems with. ARW files and invigorating auto

  I'll try to explain this, because this has happened in past and never found a way to solve, but I lived with it

  now that I have a Sony A7R the problem is more serious

  First I'm proud he realize the image in camera, I use DRO lvl 5 to get enough light, as when I'm shooting at dusk. DRO desire to do HDR but in a single file, it lightens the dark colors. in my camera, I'm happy with the results

  but when I download on lightroom, they come out almost black.

  Let me explain

  Let's say I have import 100 images

  I'll double check my preferences and everything is turned OFF when you want to import options, there is no auto toning, nothing.

  import the images I see glimpses in miniature that looks very good.

  I double click on one to enlarge, we go out so grid view.

  for a short 1 or 2 seconds, I see the full image in all its glory but that lightroom is doing something funny, it darkens the image

  an as she inspects every image, it was a DRO picture, it's too dark.

  to make this clear, the image is perfect, as it was in the beginning but after a few seconds, lightroom for some reason some think should be corrected.

  How we prevent lightroom to do this, I want the image exactly as it is, why lightroom must apply a correction >?

  I think we should do something with the interpretation of the raw file and lightroom applies its own algorithm.

  but here is what I get... until lightroom makes the change that I am able to testify the image exactly as he took and want unchanged...

  now, I have to edit each file or find a profile to which is added the work.

  any ideas how to prevent the ruin my lightroom images and just leave them as they were during the first time...

  There are 2 phases... it is when it imports initially and they look very well

  second are analysis each image and application of some type of toning that it darkens too.

  Thanks for the help

  Sorry, it's the yahoo email auto-reply message.

  I've now disabled

  thing is, there is no DRO jpg to download from the camera

  his only ARW. so my understanding is when I use the DRO setting, the camera makes changes to the ARW lightroom this bed somehow the ARW.

  but he comes back and unfortunately no DRO setting.

  because I noticed that if I take a normal image in his dark raw mode but if I apply dro to it, it comes out more bright, yet when I d/l the camera image in lightroom, which is an ARW - there no jpg files. Lightroom decides to BUMBLE

  So actually there is no interest to use DRO because when I download lightroom deletes.

  is there a way to tell lightroom to preserve the jpg preview as seen first.

  his right blade, image appears perfect... that lightroom do something, that bam, its ruin.

  What should I do to prevent ruin the image of lightroom? If it was good in the first place.

• Problem with deletion of snapshots

  Hello

  I have a problem with deletion of snapshots for virtual machine running on ESXi 3.5. I had a problem with the lack of free space on the drive where VM is hosted. I managed to free up space and wanted to commit snapshots (delete) to free additional space. Unfortunately, at the time of the withdrawal of clichés that I ran out of space again on this store now I'm stuck with clichés present in the store but not visible in the Snapshot Manager.

  Any suggestions on how I can get rid of these pictures now? All I can think is move VM converter of this virtual machine to a new one.

  Thanks, Marcin

  The reason that you ran out of space is the way a "Delete All" is handled.

  I guess in your case a 'Delete All' may temporarily need up to approximately 115 GB of additional disk space. Troubleshooting VM snapshot problems perfectly describes the process. Take a look at the animation in the "process behind 'Remove all' snapshots '.

  So what you can do is:

  -Free up enough space, create another cliché, and then do a "Delete All".

  -Cold clone or V2V the VM in another data store

  -Recreate the vmsd file based on the instantaneous channel from the header vmdk files and delete the snapshots one by one starting with the first (oldest) snapshot. If you want to try this make sure you fully understand other snapshots that it will end in the corruption of data!

  Due to the size and the possible impacts on the storage I recommend doing this during peak hours and with the virtual machine shut down.

  If you have a different available datastore (~ 300GB), I would recommend cloning. This does not affect the original files in case something goes wrong. If the clone works, you can safely remove the "old" VM and files and migrates the virtual computer is back to datastore original.

  André

• Problem with the executable files

  Hello all, I need a help from you...

  I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

  In the attachment you will find an example of what I mean.

  There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

  I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

  I also try to play with the Subvi construction structure and options, but nothing change.

  Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

  Andrea

  Hello andrea,.

  Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

  Thank you and best regards,

  srikrishnaNF

• Problems with the audit files!

  Hi friends,
  
  We are facing a problem with the audit files we have a runnning on oracle 10g server and being an Institute of teaching many ppl to connect to the server and too much work with SQL and PL/SQL. We have disabled the option to audit the database, but the audit files grow enormous in size. May I know what can be the problem and how to fix that there could be something that we would have missed.
  
  Kind regards
  Maury

  There is no setting of "verification". Display the values of

  AUDIT_FILE_DEST, AUDIT_SYS_OPERATIONS, AUDIT_TRAIL.

  I don't know 'NULL' as the value for each of these parameters.

  Werner

• I have problems with your e-mail via a web client is sending no text in the body and sending HTML instead of text.

  I have problems with your e-mail via a web client is sending no text in the body and sending HTML instead of text.  I am told that this problem is because of the BING toolbar on my browser - is this correct?

  original title: Messaging with the BING toolbar problem

  I suggest blind carbon copy yourself e-mails coming out in the future to check for other errors and if they happen then find a new Web hosting provider.  They should have been aware of the conflicts, one would presume.

  Steve

• problem with the htm file firsefox document, becomes it removed and deleted

  I have a white screen which displays the file as 'file:///C:/Users/Mark/AppData/Local/Temp/Magentic/Mag3075.htm', is unable to get rid of it, can someone give me a simple step by step direction to remove it and get out of my computer, the magnetic program has been removed, but still have files, this isn't one of them.

  First make sure you can see hidden files/folders by going to start / Control Panel / folder Options / view and check the box show hidden and system files.  While there, also uncheck to hide extensions of known file types (this will be useful to you later).

  Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and get Autoruns and run it to check your startup items.  Search for this file.  If you find it, delete it or uncheck the box allowing it to boot at startup.  Will not get rid of the file itself, but it must stop the logon dialog box (a step in the right direction).  Restart after you did it to see if it still appears.  If so, return here after having tried other options that follow.

  Now open Windows Explorer and go to that location and select the file and click on delete.  I guess you have tried this and it didn't work.  It gives you an error message when you try?  What is the EXACT text of this error (including all codes)?

  Try to use one of the following free products to remove the file/folder.  Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.

  If you are unable to file (getting an "Access denied" error while trying to to navigate on this one), you will need to change the permissions for folders and files to give you the permissions of all rights, even appropriating. You may need to go to advanced to check special permissions to see if there is any restrictions there including inherited properties of parent folders). Here are some instructions on how to do

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Once you have the appropriate permissions and ownership if necessary, you should be able to delete the file normally or with one provided above both programs.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with Delete Subproperty

  I wanted to delete a global container of Station with stored results init.

  The expression I used is

  StationGlobals.StoredResults.DeleteSubProperty (Parameters.Step.Name, 0x400000)

  Parameter.Step.Name is my search string. and in the Option property tried to use 0 x 400000 substitute variable Notdeletable.

  Problem here is that it works for the execution of a few as there is no problem in removing the Subproperty for 4 or 5 times. After that it only removes subproperty.

  And the same problem, I did not see in OperatorMode. This problem only occurs in the sequence editor. I use TestStand Ver4.2.1.

  Is there no work around for this or any other option to forcefully remove the subproperty.

  Thanks in advance,

  Christian M

  Larsen and Toubro Limited

  Mysore. India.

  Hi Share_Good,

  He had some problems with the file you attached. I made a few changes that seems to make it work the way you want and simplify things. I added comments to help explain changes in the file. Please let me know if you have any questions about the changes. I was unable to reproduce the error you posted, but I think that these changes could solve the problem, because one of the issues that I fixed in question is not cloning the property you obtained using GetPropertyObject before setting another property that has as it's the suproperty (property can have one of their parents If you need to make a copy and store the copy not the original). Also, make sure your Locals.StepResult is a variable of object reference as I have in the file attached sequence rather than a container.

  I also created a version of the file, SequenceFilePostResultListEntry2.seq, that uses an array of containers to store the results instead of the subproperties, allowing the stage names to be anything, including having spaces and '.' characters.

  Hope this helps,

  -Doug

• Problem with fixing XP files permissions

  Hi all

  I am having some problems with the permissions of the files on my Windows XP laptop. The crux of the problem is that I can't copy/move/delete some files even if ownership and file permissions are all correctly. Even within a directory, some files I can move/copy, but others I can't. The files in question are my Outlook PST files which I am trying to back up manually.

  I tried to play with file ownership and permissions. Used the account admin machine, all to nothing does not. There is no file open file handles, I can not simply copy them. It's all very strange and hope someone can suggest how I might be able to gain control of these files again.

  Thank you.

  Mark

  Please describe your problem in detail. Include the full text of any error messages you see. Tell us the brand and model of the PC and what version of XP (Home, Pro, or MCE) runs as well as the Service Pack level.

  Outlook PST files can only be saved when Outlook is closed.

  Also, it is unlikely, but do a right click on the PST file, select properties from the context menu, and uncheck the 'Read only' if it is checked. Click OK

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the quick answer

• Problem with the INF file trying to replace the USB mouse

  I am trying to replace a USB mouse that works but sometimes gives me double clicks rather than alone. But all the attempts to have it translated into the same error viz:

  "The driver for this device is missing a necessary entry, maybe it's because the file INF was written for windows 95 or later." Contact your hardware vendor. »

  The mouse I'm replacing is an optical mouse of Trust and so far I have tried 3 other optical mice - an ASDA brand, a Dell and a Logitech Value Optical Mouse. All with the same result.

  All the mice tried claim to be plug-and-play compatible with Vista (Home Premium installed). None came with the drivers and the last Logitech there is no download associated with it - I don't think this problem of the manufacture.

  Any ideas anyone?

  Old Man River,
  Thank you for visiting Microsoft Answers community forums.

  To run the checker system with administrator rights files follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  If that does not resolve your problem, try going into Control Panel configuration, Device Manager, expand the device of Interface Group.  Right click on all of the mice that appear there and uninstall.  Restart the computer and that he should find Windows driver and install it.  If it is not the case, go to Device Manager, click the view menu, click Show devices and see if there is an other mice which do not arise before.  If so, delete them and restart again.

  Please let us know the status of your question.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the .exe file programs + System Restore does not respond when you click

  I have Windows Vista. This problem started a week ago. I tried at first to use my "ccleraner" already installed, but this program does not open when you click on it. I was asked to choose the program that the application to use to open it. This has also happened when clicking on itunes. My avast program when you click also asked which application is required to open it. When it finally scanned my system it does no propblems. In addition, I tried to turn on windows defendrer as he told me that it was off. Clicked on 'Turn on..' and nothing happened. Help!

  Hello

  See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now), then
  Double-click it and run it like this. You can rename it back later. Do the same with others
  programs as needed. Use this method for other necessary - DO NOT ASSUMER one
  program removes all or that there is no other malware.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  There are MANY varieties of these with many names, but all can be eliminated with the same methods:
  
  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove all THE varieties of this malware - please read carefully the removal Instructions.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
  in the regular when windows you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
  UnHackMe execution)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• problems with quality vs. file size in export to YouTube 1080 p

  Hello

  I used to use NCH videopad as a Publisher began. He had shocking performance but gives really good quality and small size files.

  That is to say, I could export 1080 p 30 min video of good quality for YouTube in less than 2 GB file size, but Premiere Elements can

  Get anywhere near the same quality, even at 4 GB.

  So what I need is someone to tell me the parameters I need.

  Currently I export the shadowplay film recorded in 1080 60 fps 50Mbits (according to shadowplay).

  If I export to AVCH (whatever) with YouTube Widescreen HD - set it to match the source, I can't

  get a good quality. I even put the target at 20 and the other at 18 and it is still grainy quality and file sizes

  4 GB. The only way I can get the same quality I received of Videopad is with a 7 GB file into elements.

  Today I tried to export a video (30 minutes) and all day trying to find a good setting, and

  each parameter gets me grainy footage.

  If someone can you please just give me the detailed settings, I need (without the jargon) please.

  The problem is with file sizes as what he deletes my additions to my half a string because

  limits on usage of my data.

  Thank you

  NeonsStyle

  corn

  I think that you need to remove temporarily and advanced then refreshed. Then go through the following.

  The first link in your last message does not, but that a second was full of information (really great).

  If this is supposed to represent the output of VideoPad, here's the story.

  1. you have an AVCHD.mp4 file MPEG2.mpg is not. The file is 1920 x 1080 @ a progressive frame.

  2. our goal is progressive rate - variable and not constant, noted that the 3 frames rate in playback of video properties...

  minimum frame rate = 10,000 frames per second

  frame rate = 29,888 frames per second

  maximum frame rate = 30,000 images per second

  First Elements not managed well with the video recorded with a variable rather than a constant rate. Symptoms range from Premiere Elements of audio desynchronization to not being able to import the video at all. The typical remedy is to take video in the free program of brake hand to get the H.264.mp4 with constant frame rate (29.97) model. Then, you take the export of brake hand in Premiere Elements project using first elements add Media/files and folders.

  https://handbrake.fr/

  Also note that VideoPad product export with a low flow, i.e. 7759 Kbps (equivalent to 7.7 Mbps). You were trying for 36 / 50 Mbps in the export of Premiere Elements. It is an explanation of the difference in size of the files that run you in your comparisons of software.

  Since you don't seem to be involved with video MPEG2.mpg, I write what follows for information purposes... What do you do with an xml file if you used the 1080p29.97 HDTV high quality predefined with Publish + share/computer/MPEG? You should get a single file, MPEG2.mpg. If you use one of the presets whose name begins with MPEG2 (interlaced preset who is not progressive), then you will get two files, the video file and a file of information m2t.xmlses. Nothing to do with the xml file. All you want is the video file that will be MPEG2.m2t.

  Right now I'd take that video in Handbrake for 1920 x 1080p29.97, like H.264.mp4, import this file in Premiere Elements, export as a AVCHD.mp4 MP4 H.264 1920 x 1080 p 30, get a core file line with default transmission speeds and, if necessary, start to lower the bitrate to 8 Mbit / s by looking at the quality.

  Please consider.

  Thank you.

  RTA

  Add on... If you need a how tos tos for handbrake, let me know. It is quick and easy with the adjustment under video tab key.