WGA600N and uTorrent... capped at 200 Kbps?

I recently installed the WGA600N and hooked up through my card pci ethernet (gigabit capable), and everything looks good except for downloading via bittorrent.  It is connected to a DIR-825 in the 5 GHz range to N only.  The DIR-825 related forces signal about 70 to 75% and a rate of 270 to 300 Mbps.  However, in the connection network icon in the right sidebar below shows speed: 100.0 Mbps.  Not sure why this will not jump above 100 Mbps with the ethernet card compatible gigabit and forces signal strong enough?  With all that being said... If I upload a file via the web/firefox I can hit speeds of up to about 600 Kbps... BUT, if I run a bittorrent via uTorrent I out cap to a max of 200 kbps download speed.

Am I missing a setting on the WGA600N?  Why would I capped at 200 kbps download via a bittorrent client speeds?  In addition, all the drivers are updated, my port is open, and I was able to reach speeds of 600 Kbps in uTorrent via another D-Link N adapter, so I know that's not my internet connection (Fios).

Thanks in advance for any help!

I solved this problem.  My connection speed of global download in uTorrent preferences has been somehow set to 200 Kbps max.  So my question has nothing to do with the WGA600N.  Sorry for the waste of space here.

Tags: Linksys Adapters

Similar Questions

  • HP G62 U.S.-340, black screen and flashing caps lock.

    HP G62 U.S.-340, black screen and flashing caps lock when I turn it on, and some time it lights up as it should. I tried draining the power of the unit to reset and it wasn't any help. Can you help me please?

    Hi @mikeyh25

    Thank you for your request, I will do my best to help!

    I understand that when you start your laptop, you get a black screen with no error message, but you see the flashing lock light.

    Here is a link to help you.  The computer does not start and the lights blink or the computer will beep.

    Good luck!

  • When I press on DELETE opens the program of support for hp and shift caps lock is enabled...

    When I press DELETE button help HP and support the program opens and the caps lock is on, also when I press the superficial for example. left button "qe" appears and when I press the right button the calculator opens... my laptop is compaq presario cq57 running windows 7 home... Thanks in advance...

    Hello again jeffrey27.

    It is difficult for me to say what would be the price of disks (as much as you are in a country other than mine).  However, it should be a minimal cost and a good thing to have a system failure such as having to replace a hard drive.

    I don't think using another PC to create a recovery disk is an option.  The disks are specific system (it might have small differences in the two booklets), and also may not be valid under the license agreement for Windows.

    I think it's information about your location.

  • I use a Belgian keyboard and the CAPS of SHIFT or alt + tilde do not work for me

    Hi I have a similar problem: I use a Belgian keyboard and the CAPS of SHIFT or alt + tilde do not work for me. I can configure default Hiragana in the locale, but it is not honored - lights in romaji and I have to click the icon pon :-(

    I feel bad: I bought the expensive 'Ultimate' version of Windows to use it for the Japanese language, then I discovered that Microsoft IME is unusable. I can't click an icon all five words, I need the default to work as configured and shortcuts too (and I'm not the only one, a lot of people write Japanese under Windows I guess)

    Research in other forums, this seems to be a known gene since Windows XPand still not been resolved in Windows 7? I hope it's in Windows 8.

    I'm ready to upgrade to 8 or modify registry settings, install additional DLLs or something else, but I feel it too bad if I install a linux to be able to do what I bought Ultimate for :-(((

    Split from here:
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/changing-Microsoft-IME-language-input-default-it/a63cf759-d665-48b1-93fb-90d4a2d6cb72?page=2#footer

    Hello

    I suggest you to send your comments to the following Web site.

    Give us your comments for Windows 7
  • The signatures and small caps in MS Word

    How can I access signatures and small caps for Adobe Garamond (or any other font opentype with these features built into the font file) using MS Office, including Word?  Signatures do not activate when checking 'conditional ligatures' and the small caps that appear when checking 'small caps' are not 'real' small capitals - they are just poor Word manufacturing.


    Thank you!

    You must use the option "Insert a symbol", select the subset of the "private use area" and insert one by one.

    It would be wonderful if MS Word provided a better user experience when you work with OpenType features, but this isn't something of that the police are in control.

  • Find the exhibitor and small caps

    Hello

    How to find the exhibitor and small caps in indesign via javascript.

    Kind regards

    Assia

    Hi assia,.

    Try this to find Exhibitor,

    var doc = app.activeDocument;
    app.findTextPreferences = null;
    app.findTextPreferences.position = Position.SUPERSCRIPT;
    var found = doc.findText();
    app.findTextPreferences = null;
    for(var i =0;i
    

    for small capitals

    var doc = app.activeDocument;
    app.findTextPreferences = null;
    app.findTextPreferences.capitalization = Capitalization.SMALL_CAPS;
    var found = doc.findText();
    app.findTextPreferences = null;
    for(var i =0;i
    

    Kind regards

    Cognet

  • BitTorrent and Utorrent act like they you download, but then the program does nothing when I try to install or open.

    I tried to download the programs. It seems that they download, but installation does not work everytime I try to open it later. Utorrent and bittorrent, have not tried all the others. I read a q & a to move mimeTypes.rdf and done and restarted Firefox and redownloaded in the program, still nothing.

    1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
    2. Click on I'll be careful, I promise!, to continue on the subject: config page. A list of parameters must appear
    3. Filter the list by typing in the search bar at top. Enter scanWhenDone. Now you should find the "browser.download.scanWhenDone" preference.
    4. Double-click this preference to set the value to false.

    Please reply and let us know if this helped you!

    Note that you can re - turn that as false parameter turns AV download scanning off.

  • Compac cq62: downloaded windows 10. Now I have a black screen and the caps button continues to blink. All the answers.

    Downloaded Windows 10. 1 week later, I have a black screen. When I turn on the power to all I get is a flashing caps button one am not able to connect. Ilha a Compaq cq62 model.

    I have seen this reported, and the response is not good, sorry:

    "Problems of upgrading Windows 10: black screen after update (new).
    Some users taking advantage of the Windows 10 upgrade are the conclusion that once the completed upgrade their device just gives them a black screen and does not start.
    Microsoft is still working on a fix for this, but it's not a way to avoid it now. Worse, it seems that the problem that happens on multiple PC configurations. For now, we can only suggest using the utilities provided with your backup device and create some external media backup before starting the upgrade in case that happens. If this happens and you live near a Microsoft Store, make an appointment with them to have your device looking if you experience the problem. Some reports (such as those of our comments) indicate that disabling anti-virus programs before performing the upgrade prevents this issue. »

    http://www.GottaBeMobile.com/2015/07/30/7-Windows-10-upgrade-problems-how-to-fix-them/

  • Beeping sound and flashing - Satellite A100-200 at the beginning upward

    My Satellite A100-200 is three months old and stopped working. When I start there is a continuous beep and a flasher above the hard drive indicator.

    Is that what I can do or is it a warranty repair

    Hello

    stop your machine immediately, or that you have installed things before? Have you tried to remove the hard drive and if you have 2 RAM modules at least one of them?

    If all fails, you will need to give your machine a local service partner. They will then solve your problem.

    Welcome them

  • WGA600N and the WRVS4400N

    I have problems with the connection of the wireless game adapter.  He is able to find my router and it connects to where he asks my security key.  I enter the key and I checked it came directly through my eyes and someone else and I cannot get it to connect.  I really need to keep my WRVS4400N in the House to protect my periphery of Home Office, but I can not get the adapter to connect and do not want to buy another router woreless.  Any suggestions?  What settings can I give show you where I went wrong.  I don't really have chnged much the default value on the router.  I have a few settings to restrict access, but they are specific MAC address.  I also disabeld these and tried and it still does not work.

    can't really think of anything except recheck that the WPS is disabled in your WGA600N because WRVS4400N does not support. This feature has been examined in the link below:

    http://KB.Linksys.com/16319

    also, since you mentioned that you use MAC address filtering (at least that's how I interpreted ' some access restriction settings, but they are specific MAC address ' ) to ensure that it is disabled when you try to configure the settings on the game adapter wireless

  • Eventvwr logs errors and warnings plus 6 200!

    Eventvwr records errors and warnings over 6200

    My configuration:

    * Dell i7 with 8G of memory.
    * Windows 7 sp1 teacher
    * SQL Server 2008 with BIDS2008
    * Oracle11gR2 with SQLPLus and SQLdeveloper
    * Java 7 update 40 Std Edition
    * McAffee
    * Malwarebytes

    Eventvwr shows more 6 200 errors and warnings.

    Errors are followed by events-core, MCUpdate, PrintService, DHCP, DistributedCOM, SQLISService100, MSSQLServer client... and many others
    But the laptop boot and run all the software installed without complaining...

    QUESTION 1: How I clear the eventvwr log events and start over so I can monitor errors when they occur?

    QUESTION 2: at startup, McAffee wonder if I want to allow change the disk, this usually happens after a few updates downloaded applications for example Windows updates, updates of Adobe etc...

    I paid more than $200 for some company that clean, now he's back :(

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • BlackBerry smartphone synchronization with Outlook calendar and remember more than 200...

    Since obtaining my Curve 8310 and synchronization with outlook calendar, whenever I re - synchronize my handheld device remembered only about 200 of my events 1000 + and offers to remove 800 + events to my outlook on the pc.

    I don't want to lose these data to both portable and pc. So I always click on the option "re-sync" so that I have (re) - effectively transfer the info from my pc to the handheld every time, so don't not the deletion of valuable data from my pc.

    It seems a bit ineffective design and more unlike blackberry. That's why I missed something somewhere, I'm sure...

    Can someone tell me where I'm likely to go wrong? I would be very grateful...

    PS. I recently upgraded to version 4.5 OS and synchronized with enthusiasm to see if it was a question... He seemed to remember data for day 1. But now I have to synchronize again today. Back to his old "do you want to remove any tips?'..."

    Hi and welcome to the forums,

    You have your configuration only transfer again?

    Located in taper to transfer the date range, I usually put 365 on both sides

    before that date and after this date.

    Thank you

    Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

  • PC restarts showing a blue screen and ATI RADEON XPRESS 200 graphics works only with WINDOWS 7

    (1) I have a motherboard integrated ATI RADEON XPRESS 200 SERIES
    I installed the 64-bit windows 7 but everytime I use, it shows a
    BLUE SCREEN and instantly gets restarted.

    ERROR INFORMATION

    Problem event name: BlueScreen the system Version: 6.1.7600.2.0.0.256.1
    Locale ID: 16393 BCCode: 1 BCP1: FFFFFFFFC0000005 BCP2: FFFFF960000D69EA BCP3: 0000000000000000 BCP4: 0000000000000000
    OS version: 6_1_7600 Service Pack: 0_0 product: 256_1

    Pls explain why this happens n solution for this?

    (2) I downloaded the latest updates for microsoft video card, but they are in the form of files * .cab, can someone explain how to install them.

    With the Xpress 200 integrated graphics, you will not be able to get Aero or other effects of Windows 7.

    You can adapt a motherboard graphics card: AGP or PCI-E slot there. A Radeon 3400 or other card compatible Windows 7 can be pretty cheap and would provide Aero and other effects of Windows 7.

  • ESXi 5.0 and NAS Iomega ix2-200

    Hi guys,.

    We are seriosly thought about the posibility to define ESXI - Hypervisor - with Iomega ix2-200 NAS. We were check the official documentation for Iomega. I checked that ix2-200 is supported for ESXI 4.0, but we are not sure if pressed for ESX 5.0.
    Someone knows this product is compatible with VMware? I have not found any associated IX2-200 and Esxi 5.0
    Thanks in advance,

    If it is not on the HCL, this is not supported.

    However, it works very well (I run it every day).  This is not supported because most suppliers are not going in the effort to verify support for N - 2 equipment.

    If the support is important to you, why not pick up a px4/px6 supported?

  • What is the difference between a header and a Cape?

    Hi there - I'm starting, so please be nice, but I can't - anywhere - find someone who can explain the difference between a Cape and a header when it comes to platelets.

    A "category" would be a tag like

    or

    (they give importance and emphasis to some text in your page) HTML headings

    A "header" is html5

    tag (a container to hold the Info "at the top of the page"): header HTML tag

Maybe you are looking for