ACS Admin Access

Similar Questions

• I am trying to install a software, but I get this message in Admin: access denied! You don't have enough power words to activate this function.

  Can help you, I get access denied you do not have enough words to activate power

  I am trying to install a software, but I get this message in Admin: access denied! You don't have enough power words to activate this function.

  The message continues to appear over and over again and finally goes and does to install the software. It is on a PC HP mini.

  LMV,

  I hope that you do not have too much of your own data personal on the computer yet, because if you used I would suggest that you reinstall the operating system to solve these problems.

  Go to http://partsurfer.hp.com and enter your name/product number in the search field. The results that arise should include a restore CD that you can order to perform the reinstallation. Yet once, please make sure to save any personal data that you have put on the computer before attempting this.

  -Alex

• I have my old laptop work, admin access, and I need to pass the parameters of language from German to English, especially the menus. Can you please indicate.

  I have my old laptop work, admin access, and I need to pass the parameters of language from German to English, especially the menus. Can you please indicate.

  A.I have changed the time zone.

  But I can't understand how to move to the menus in ENGLISH and the keyboard settings. They are in German. Need urgent help

  The system is running on Windows XP Professional

  Thank you for your help in advance.

  (Yes the multi language pack is somewhere on the laptop... where I'm not sure)

  Hello

  1. - you want to say that you have an administrator access on this computer?

  2. What is the operating system default language when the laptop was purchased?

  If the default language is German so it is not possible to change it to English.

  Reference: to change the language used for menus and dialog boxes

• Banner for the 5.3 ACS Admin Login page

  Is it possible to put a banner of ACS admin web page login?  Either display it directly on the web page or make a redirect to a cover page?  Can I change the administrative pages directly or ACS provides a mechanism to add such a feature?

  We use GBA 5.3 running on VMWare.

  Thank you

  Tony

  The good and the bad :-)

  There are currently no such capability. However, ACS 5.4 has the following feature clerks

  'Display the banner of configurable Copyright before and after the Admin login '.

  5.4 ACS will FCS in September 2012

• File Manager of Persona and admin access permissions

  We test 5 and Manager of the person and ran across a problem during the POC.

  Someone at - he found a way to allow the admin access to records created by the Persona Manager user profile? By default, PM creates files of the user in the title of the part of repository with the property set exclusively to the user, so as an administrator, when I try to look at the files from there I can't without first ownership. Not only is it a pain to have to do this for troubleshooting, I fear that appropriators will break things for the user to go forward

  With the folder redirection of MS, there is an option of the GPO, you can choose to have the non-exclusive folder permissions. Creates a way to do the same with folders and file persona Manager?

  Thank you

  
  Geoff

  Welcome to the forums.   Under systems/users/profiles GPO there is an option to Add the security directors for roaming user profiles group

• MX7 problem: the remote computer Admin Access

  In the last month or so, I'm suddenly unable to connect to the web application admin of any machine as the Web server itself. It hangs just for minutes, try to connect and possibly error an error standard IIS (not trace debugging of CF), saying: there is a dns error or it does not find the site.
  
  I'm on the same subnet - this is a laboratory of development - and it has worked well for years, through CF5 and CFMX6. Then last month, while remaining on MX6, I was suddenly unable to connect, without any changes to the configuration at all.
  
  I upgraded to MX7 today (hoping that the problem of admin access would, even if it wasn't the reason for the upgrade) and I'm still not able to access the/CFIDE/administrator/app from anywhere but the localhost. CFDocs works very well, and all my sites and all the apps work fine. I just can't access the administrator application remotely.
  
  Any ideas out there?
  
  In the interest of full disclosure, I work for the federal Government, and here it personnel grows a never-ending stream of updates by SMS to our OS, browsers, applications, etc. I wouldn't be surprised if they have disabled something that is necessary for the purposes of CFadmin, but I can't understand how to check. But the admin app does not work on Firefox, IE or netscape (and they only patch for IE).
  
  

  Got the answer.

  Our COMPUTER wizards push SMS packages them all the time, thinking that a single solution works for all the world. It's a few coders in our establishment are not tons of hidden programs being installed on our desktop in the name of "security."

  They have installed BlackIce Intrusion detection firewall. I discovered this looking through my process active and found "blackd.exe. I disabled who and all of a sudden, I could access the CF admin immediately from any browser.

  Now I just have to find a way to change BlackIce or disable it without the police IT, put it back, every night...

• Provision of different levels of admin access plan the types of planning

  How can I set up by types of plan admin access levels? For example, I would like to grant full admin access to a plan type, but to limit their access to another type of plan in the same application? The type of plan, I want to limit them is essentially a type of labour I won't allow them to have access to admin. Someone knows how to do this?

  Hello

  Unfortunately, you will not be able to configure a user to manage the metadata for a number of types of plan in classical planning.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• ACS, Service access and authorization

  I'm under ACS 5.2 and I'm trying to set up 3 new SSID, which 2 are not guaranteed and 1 which is secure.  I'm trying to understand the best way to allow their evolution on which network they come.  All authentication requests are from the same devices, LAN controllers without wire, so NDG cannot be used as criteria.  I was watching either create 3 Access Services and using selection rules, or by creating 1 Service access and using permission to choose.  However, I can't find an attribute to use for determining what network they came.

  Anyone has a suggestion for the best way to do it?  I have

  Go to the elements of the policy-> Conditions of network-> end of Station filters and create a rule CLI/DNIS that includes the name of the SSID, and then use it as a condition to any rule you create for authentication. The SSID will be preceded by MAC address, then enter * ssidname (i.e., match whatever it is before the name SSID, then match the SSID). For example, if the SSID is called lab, then you must enter * lab.

  Then go to access-> Service selection policies and create a service selection rule that has end Station filter as a criterion.

• ACS network access Restriction does not. He denies it, but allow.

  I have a problem with the restrictions of access to the network on the Group of ACS configuration.

  I configured the NAR in a group field and set it to deny access besed on client AAA, a wireless LAN controller.

  But users of this group is still able to connect wireless controller.

  Newspapers in GBA shows that the fields are right. the right user in the right of the group in good AAA client, but does not deny.

  Put in place DNIS also supports the restriction. This is how it should be configured,

  -Procedure for the configuration of NAR:

  (1) go to User Configuration---> select the user name that you want to restrict.

  2) go into Restrictions on access network (OAN) option.

  (3) by user defined network access Restrictions.

  (4) check "define CLI/DNIS-based access restrictions.

  (5) select "reject the call or Access Point.

  (6) in the dropdown AAA client list - select the name of the device on which the user does not connect.

  (7) for Port - Development *.

  (8) in CLI - use *.

  (9) for DNIS - development *.

  (10) click on submit

  Kind regards

  ~ JG

  Note the useful messages

• can not install the willmaker software get error message that dosent installer have enough admin access

  program will not install because windows installer are not enough access admin

  Marty,

  Have you tried right-clicking on the file exe, and "Run as Administrator"?

  UTC/GMT is 16:37 on Sunday, July 22, 2012

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

• junction of Windows 7 points then the admin access denied.

  Is there no workaround solution for access to? Add my admin also local administrator account with the same results.

  What you trying to do?  There is nothing here to access.
  Do you understand what is a junction point?  See
  http://msdn.Microsoft.com/en-us/library/Windows/desktop/bb968829%28V=vs.85%29.aspx

  If you want the list of junction points and see the objectives this can be done from a command prompt
  example - dir / a: l/s
  (If executed from the root that lists all system junction points)

• BEFSR81 v3 after upgrade without browser admin access

  After upgrading my BEFSR81 v3 to the latest firmware (2.51.4, build 001 June 13, 2008) I often have problems of access to the Web interface.

  Immediately after a reboot, I can access and manage the router with Firefox or IE without problem.  But then if I do a configuration change the next day all I get is a blank screen after the login prompt.  The only way to solve the problem is to reboot the router.

  He always asks an id of username/password correctly, and if I get the wrong information I'm getting an authorization failed.  But put the correct password just give the empty window.

  I'm tired of running down in the basement of restart the router every time I need to make a change.  Any idea what's going on?

  My router works better, so I'll give my solution here for others.

  During a chat session on 10 April with the support of Linksys, I explained my problem and was told that I can download an older firmware to the following address, then use TFTP to perform the downgrade.  I checked this address still today while writing this message, and I can't get there more:

  Linksys FTP server

  On 10 April, which worked and I managed to download the 2.50.2 firmware which is old enough, but it's the only version I could find on the site recommended.

  The good news is that worked and my router is functional without obvious problems for about two weeks.

  Today I decided to try upgrading the firmware again.  I am disappointed that Linksys has not addressed this problem somehow because others apparently have similar problems with the "current" firmware version  In fact, there is a certain
  confusion on the Linksys BEFSR81 v3.0 support page.

  As of today (April 26, 2009), the download of the firmware for the BEFSR81 page lists the following:

  2008-06-13
  Ver.2.51.1

  (I'm not that these date and numbers because they do match).

  The file of the firmware provided in the link is actually: 2.51.4.4_20081230_code.bin

  Notes the following version history list:

  Firmware Date: June 13,2008
  Current firmware: Version 2.51.1
  Product PartNo: BEFSR81 v3.x

  2.51.4.4 December 30, 2008
  2.51.4.1 Jun 13,2008
  2.51.3 March 2, 2007
  2.51.1 May 5, 2006
  2.50.4 Nov 15, 2004
  2.50.2 May 19, 2004
  Oct 15, 2003 first version 2.45.5

  So, from my own experience and that of others in these forums, version 2.51.4.4 does not work on the BEFSR81 v3.0.

  There are still 2.51.4.1 on the old Linksys support site:

  Linksys support (old)

  It's the version I have installed now, and so far it seems to work.

  I really wish I could find the version 2.51.3 somewhere that it was the most reliable for me.  Unfortunately, I can't find that anywhere.

  Additional information, another user is in these positions:

  More on version BEFSR81 issues.

• W7 x 64 SP1 programs that require admin access stop responding

  PC G560

  Windows7 64 bit with SP1 (happened before SP1)

  Hello

  When logged in as a user if I click on anything that requires administrator privileges, the box is to enter the admin password, it does not matter if I get the password or if I click Cancel the program crashes then with the circle icon turns when I hover over the program. CTRL ALT + DEL and close the program is not responding, and everything is OK again.

  Any suggestions please

  Note of the moderator; subject published

  Resolved without a full installation. Thanks to a bad other sole on this forum.

  I searched through the pages of research and the most common problem was with Lenovo PC or some applications, to say that Lenovo have such a small market share, but so many problems is really boring. a search of Yahoo drew back me on this forum, uninstall Veriface has solved the problem, which is a shame because I really liked the face recognition as the laptop is used by the whole family.

  So far Lenovo have not impressed me-Wireless N is almost a fraudulent claim, low autonomy, constant nitpicking like this just resolved, only real support is that this society support forum is crap. Touchpad is also evil.

  An offcast from IBM which I rate highly is poor.

  In any case, I hope this helps others out there.

• Locked out of Admin Access and password has been deleted or changed.

  I've been locked out of my account and I can not get access to the C drive not even with the command prompt. Whenever I try to use Windows Management console it says "incorrect parameters". -What this means and how can I have access again?

  Oh and I have Vista and I tried the Net User Administrator / Active: Yes and I can't access my UAC or C drive. Also, when I open command prompt and type "dir" I get access denied, even as an administrator.

  How is that possible? I was told there is a way to get rid of all passwords on my computer to reset the?

  Thanks, :))

  Making it big!

  Hi David,

  No, still can not, the message says: username or incorrect password.

  As for the guest account thing, Yes, you're just weird, I couldn't access the C drive on my regular account, but from the reviews, I can. HM... indeed.

  Can you suggest someone who can help?

  Thank you

  Q

  Making it big!

  There are many amd MVPs experts who can help you.
  Just be patient and wait.

  A much more radical action is to perform a Vista repair install as long as you have the DVD of the Vistal Installation. (Read the Note from the tutorial section)
  Here is the tutorial...
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  If you are not comfortable doing this, download a friend who is Knowledeable in the computer help you.

  Another choice it would take your RELIABLE local computer service shop.
  It will cost you, but you be rest asured that problem is solved.
  DO NOT take it to Best Buy or any geek squad ' joints '. "

  I would just wait for better answers from the experts in this forum. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• No Admin Access with a single user installation

  I use Windows Vista.

  I only have a configuration of the user on my computer and handle less it says: I am an administrator of the user accounts. However, I have no access as an administrator. For example, I run msconfig and I get an error message "you don't have sufficient privileges to run the system configuration. Run this utility as a user in the Administrators group. »

  I can also activate the option of user account control, remains unchecked, even after I have enable check / he.

  Any ideas?

  Hey Cory Clapham,.

  1. uninstall programs like spybot spyware removal, run malware scans and check.

  2. try to perform these steps by activating the built-in Administrator account. This account is disabled in Vista by default.

  HOW to: Enable the build-in the administrator account in Windows Vista

  http://support.Microsoft.com/kb/555910

  See how it goes.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.