Action after provisioning

Similar Questions

• VCAC after provisioning automation: when an action of commissioning to report as successful?

  < VCAC_Provisioning_Analogy > when you go to the bar you could ask the bartender for a beer and the bartender will acknowledge receipt of your request for a beer, but which was really a successful command?  If you get a beer in a reasonable time, then I would say that Yes.  But if ever you get your beer, I would argue that has failed. < / VCAC_Provisioning_Analogy >

  Using a long walk asynchronous after provisioning automation triggered during the workflow of change of State MachineProvisioned will lead to this same dilemma in some cases.  We used the vCO to call a REST service to launch another orchestration and the REST (about SCORCH) fortunately reported 'success' service, but in reality still dealt with the orchestration on its end.  VCAC reported a State of success, but in reality, the deployment server was not fully cooked.  In our case, we have improved the success factor in the orchestration by adding retry logic, but I am still left with the dilemma that VCAC will report on the success before the real success is achieved.

  So do you think it's OK for VCAC report success prematurely?  Or design model must be avoided at all costs?

  IMHO, avoid, but I agree with some reports of premature success, as long as it is more often with success, most of the time, and I keep my job after the failure.

  Cheers and thanks in advance for your opinion, abuse or free beer.

  -Sean Clark, @vSeanClark

  TL; DR version: it depends on how much you care about the 'complete' accuracy and are reliable of these external processes. I don't like to leave things in the hands of a blind process of execution... but, it's me.

  -Long answer more-

  When you talk about "app supply" in as long as State... you're talking about now go further back in the stack and get in App Manager. But, maybe it's not necessarily what you want, either... it depends what SCCM and SCORCH are made for you. Personally, all of our post-clones operations are built using workflow based on the comments script package manager; He gave me the ability to manage all of my system-level tasks that can be automated (relatively) painless with the opportunity to make a strong error handling and add error messages directly in communications by electronic mail of things which perhaps did not work as expected. BUT... we weren't really doing anything in terms of automated supply before this, I had the chance to build just from scratch.

  My point of view, essentially, more is leave you it up to chance running / blind without any kind of error handling / audit / etc, the harder things are to troublehsoot and find the problems. I invested about 2-3 weeks of my life to build as much error handling I could possibly in the whole of the workflow States to identify problems in the complex workflow integrations (if she was by pulling values from the workflow, or bringing values from external sources) wasn't going to be a nightmare to troubleshoot when (not so) something didn't work as expected. The last thing I wanted my operations team to try to debug complex strings of javascript and external hooks (if it was avoidable).

• Where are my Actions after installed DC?

  The installation of Acrobat DC has retired all my plug-ins, which is annoying, but not insurmountable. I can always update and re - install a plug-in.

  But she did with my Custom Actions that I created with the wizard of the Action? I don't remember how I created most of them, and they have simply vanished into thin air after the installation of CC DC. Don't tell me they are incompatible - they are Adobe Acrobat Actions!

  -Alistair

  Actions:

  Windows users copy files from: "C:\Users\\AppData\Roaming\Adobe\Acrobat\11.0\Sequences\" to "C:\Users\\AppData\Roaming\Adobe\Acrobat\DC\Sequences.

  MAC users: "/Users//Library/Application Support/Adobe/Acrobat/11.0/Sequences/" to "/ Users/labuser/Library/Application Support/Adobe/Acrobat/DC/sequences.

• Cannot call a dynamic report link action after dynamic refresh

  I have a shopping car, that I'm trying.  (apex 4.2 database 11 g 2)

  In the basket, I have a link change which performs the dynamic action to open the modal page plugin.   I also have a button on the region to do a region of dynamic action refresh if you modify the cart in modal region.  After the updating of the region, I can no longer click on the link Edit (nothing happens)

  the link is defined as class = "lines" onclick = "return false".

  and lines is a dynamic action of jquery to call the page target in the link for the modal skills builders page.

  I checked the JS console and I saw no errors... any suggestions?

  Thank you

  Scott

  Hello

  When the page is loaded, Jquery listen event trigger on document.ready

  But in your case, when you refreshed your region, the values on the screen are from this point while it was loaded before.

  Go to your dynamic action

  Change extended the event live or dynamic.

  Scope of the event: DYNAMIC or LIVE

• Apex 4.0 interactive report row view dynamic action "after Refresh.

  Hello
  
  It seems that interactive report view row do not trigger the event "after refresh.
  I have not tested other events.
  
  I have taste.
  https://Apex.Oracle.com/pls/OTN/f?p=40323:76
  
  There is a dynamic action that show the alert by region "after updating' event.
  
  When you see a row, the alert is not displayed.
  Change record show no alert ether.
  
  Is it bug or missing feature?
  
  Kind regards
  Jari

  Hi Jari,

  I consider this a bug/feature missing as well. I filed bug # 10376989.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Can't send emails... There is no action after pressing the Send button!

  When I press the button "Send" or "Send now" button directly from the upper left corner or even through the 'File' tab, the email does not get sent. In fact, there is no action at all. There are has no pop ups showing message of progress or error messages. Its just empty!

  If I try to save the e-mail, it is saved correctly but nothing happens when I press send.

  I'm not familiar with "check and send".

  Have you tried Thunderbird running in its safe mode? This would tell us if an add-on is causing your trouble.

  https://support.Mozilla.org/en-us/KB/safe-mode

• Mail.app rules prevent any actions after you have moved the message

  If the rule in the Mail.app contains action Message go to any folder, then all the other measures of the rule does not apply automatically. Only if I hit the rules manually.

  If I remove this action, then other actions of the rule will be applied automatically.

  It is similar to the document the behavior, but again, it is a rule in Mail.app, not the rule in the mail server.

  Why is this? Is this a bug? Is it possible to fix it?

  Here's similar question more then there is still no response year: ly http://apple.stackexchange.com/questions/168621/mail-app-rule-works-only-partial

• Firefox can not be updated and do not be installed (no action after unpacking the file or the program update)

  Hi all

  I was unable to update Firefox since Version 17.0, each update attempt failed. The automatic update feature still reported that the update has been without success/failure, then download the new version of Firefox and then try to install it simply leads to inaction after unpacking (running the file). Now, I tried to address this problem by uninstalling firefox and then install the new browser. However, I'm back to where I was decompresses the file and then nothing happens. I am very frustrated as I like the browser and I can't use it anymore. Before, Version 17.0 worked well for me, I simply couldn't be updated. I checked my firewall (windows) and my anti-virus (avast free) program and the program is not blocked, so I simply do not know why I can not update and (re-) install. I would appreciate any solution

  Disconnect for security. Use the SafeMode clean Windows, but from the F8 key. See if you can install Firefox.

  • http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  I wonder if somehow, security software is always blocking the installation. Consider temporarily uninstall if necessary security software. No doubt other .exe files run (or I doubt you could do a lot with the computer) and this isn't a problem with file associations have been corrupted.

• Tips: APEX 5 r IR by a dynamic action after the text fields complete

  Hello I hope I can get assistance on this matter and thank you in advance for any information.

  I have an APEX 5 screen, that has 4 fields of entry of text and under this one IR that has these 4 parameters in its SQL where clauses.

  Now if I create a button that submits page or redirects to this page my report can be updated with the values of user entered without problem, basic stuff.  If I create the settings section as a dialog box model once again that I can get the update report as this dialogue submits the page as well as the report can refresh according to closed dialog option.

  What I struggle to reach is to allow the user to enter values in the text fields click on a button called 'submit' and there all stages of implementing dynamic action without page reloading.  I want user to P1_A, P1_B, P1_C, P1_D press on "submit" input, dynamic action that links the values entered into the fields, then fire another dynamic action that updates the State when the button is clicked / modified values what works the best.

  I am struggling to get this to work and I even tried to copy these settings and do them as hidden for example bind input P1_A to P1_A_Hidden by a dynamic action and have the report where clause =: P1_A_HIDDEN, but have not managed to get this working.

  It's possible?  I know its easy to simply send the page and make it work, but I want the experience to be quite uniform for the user and act as you never leave the page.

  I saw on the packages of the app in the chart example.  The bubble chart has a list selector (salary) and the table updates dynamically, it seems so that the process can occur, but I need the user to enter text and not use selection lists.

  My apologies if I missed any, but I can give you more if it helps.

  Concerning

  1972903b-5166-494e-8355-08d9d4006e96 wrote:

  Hello I hope I can get assistance on this matter and thank you in advance for any information.

  I have an APEX 5 screen, that has 4 fields of entry of text and under this one IR that has these 4 parameters in its SQL where clauses.

  What I struggle to reach is to allow the user to enter values in the text fields click on a button called 'submit' and there all stages of implementing dynamic action without page reloading.  I want user to P1_A, P1_B, P1_C, P1_D press on "submit" input, dynamic action that links the values entered into the fields, then fire another dynamic action that updates the State when the button is clicked / modified values what works the best.

  The button simply trigger a unique dynamic action of refreshment on the IR region. Session state for page elements must be processed automatically by specifying them in the property Page to submit Items of the IR region.

  Please ensure that you have updated your forum profile with a recognizable username instead of "1972903b-5166-494e-8355-08d9d4006e96": Video tutorial how to change username available

• Action after tabs interaction training

  Hello

  I use tabs interaction of training and I am trying to create an action where an object (outside the interaction of training) is displayed only when the user clicks on all tabs. Is this possible?

  Thank you

  Not with the widget of the default interaction (as far as I know) because there is no way to trigger variable following the user interaction with each tab.

  However, if you build your OWN interaction tab using default Captivate interactive objects such as intelligent form buttons, THEN you can use advanced Actions and Variables to get what you want.

• Problem with Linux Blueprint receives not to HOST name or IP address after provisioning

  We run VCAC 6.x and I have setup a plan for a version of linux RHEL 5. Network profiles have been implemented, as well as some ip address ranges. When I load the action plan the machine does not receive the defined HOST name. The network interface comes up, also has a MAC address, but has no IP address assigned address. When I connect vcac and check stocks of intellectual property, I see that an IP address has been assigned. What I'm missing here?

  You have a configuration specification of customization vCenter and applied to this profile of renewal and construction?

• Actions after synchronized block happens afterwards?

  Hello
  
  I would check my intuitive understanding of synchronization is correct here. I read the specification of the Java language but I couldn't find anything in my example. It is very vaguely double checking (anti) - model.
  
  My question is more precisely: I have the code:
  

  public void method() {
      synchronized(anyObject) {
          actionA();
      }
      actionB();
  }

  ActionA() there so a happens-before relationship with actionB()?
  
  Thank you very much!

  Bombax wrote:
  Let me rephrase my question to be more precise. For any thread given incoming method(), can I be sure that actionA() on this thread runs before of actionB() on the same thread?

  "Happens - before" is not so interesting in the context of a single thread. Yes, for one thread, all actions will appear to enter the "Decree on the program", block synchronized or not.

• Before escape character point in the dn entry after provisioning OID

  Our users IOM are automatically provisioned to OID using OID box connector. Everything works well except this issue.
  
  When the value of "User login" IOM contains the character (called BILLY. (BOB), the dn entry in OID is created with an escape character (dn: uid = BILLY\.) BOB, cn is users, dc = abc, dc = com).
  
  Example:
  'User Login' IOM = BILLY. BOB
  :
  :
  OID entry created as
  DN: uid is BILLY\. BOB, cn is users, dc = abc, dc = com
  First name: Billy
  UID: BILLY. BOB
  CN: Billy Bob
  :
  :
  
  Note that the uid does not get the escape character, only the dn value is getting affected.
  
  Thanks in advance!
  Kabi

  You must remove. in the definition of research, which comes with STANDARD connector.

  Re: OID Connector.User Id includes "------" seen by DOHAD

• problem to perform an action after a delay, setTimeout in 3D PDF

  Hello,
  
  I'm new in the creation of 3D PDF et JavaScript et I have a problem with the function SetTimeout.
  I want to make a change texture on an object et after 3 seconds make another change the texture on another object.
  To do this, the function SetTimeout seemed the most effective but I cannot get the expected result.

  For more information:
  I declare two functions in my JavaScript file

  function bouton_on() {}

  mat0 = scene.materials.getByName ("bouton_on_inactive");

  copyMaterialTexture (mat0.name, "bouton_on_active");

  setTimeout ("voyant_on ()", 1000);

  }

  function voyant_on() {}

  mat0 = scene.materials.getByName ("voyant_inactive");

  copyMaterialTexture (mat0.name, "voyant_active");

  }

  In my pdf button, I well call to the bouton_on() function

  getAnnots3D (0) [0].context3D.bouton_on ();

  And in the button in my pdf, I do well bouton_on () function call

  getAnnots3D (0) [0].context3D.bouton_on ();

  I thank you for tell me whathurt or help me findanother solution.

  Thank you

  Hello

  I am newbie in creating 3D PDF and Javascript, and I'm having a problem with the SetTimeout function.

  I want to make a change of texture on an object and then 3 seconds after United Nations another change of texture on another object.

  Pour do this, the SetTimeout function seemed to be the most effective, but I can't seem to get the expected result.

  Pour information:

  Well, I declare my two functions in my Javascript file

  function bouton_on() {}

  mat0 = scene.materials.getByName ("bouton_on_inactive");

  copyMaterialTexture (mat0.name, "bouton_on_active");

  setTimeout ("voyant_on ()", 1000);

  }

  function voyant_on() {}

  mat0 = scene.materials.getByName ("voyant_inactive");

  copyMaterialTexture (mat0.name, "voyant_active");

  }

  In my pdf button, I well call to the bouton_on() function

  getAnnots3D (0) [0].context3D.bouton_on ();

  Thank you to tell me what's wrong solution of a verse refer me or.

  Kind regards.

  It is actually very complicated to do.

  "setTimeout" is not a global function in AcroJS - instead, you have the app.setTimeOut () function. Go in 3D of JS engine, you don't have direct access to the "app" instead of this object, you must call via

  host.app.setTimeOut ("myFunction (variable)");

  The problem facing myFunction() is called in the context of the host API (where 'he' = 'doc') - so that you cannot be directly used to call a function in your 3D scene. It will rather be two return trips:

  function my3Dfunction (variable) { (variable) console.println; } }

  host.app.setTimeOut ("getAnnots3D (pageNum) [0].context3D.my3Dfunction ('hello')", 1000);

• Transform questions of Action after that image returned vertical

  I automate an action sequence that does the following:

  (1) changes the perspective of an image (transform-> perspective-> drag one of the corners to the top).

  (2) duplicate this layer

  (3) reverses the layer vertically (transform-> flip vertical)

  (4) change the layer vertically returned.

  When I do it manually, it works very well and there is no problem.

  When I read the record, the result of step 4 is of what it's like when did anything in his hand and the location of the image and the perspective is totally not what I expect.  (See the image below for a Visual description of what I see).  My guess is user error :-)... Any help would be greatly appreciated I'm totally stumped.

  

  -Thank you,

  You can try one of the following and see if it meets your needs.

  If you just want to return the layer so that it corresponds to the first layer, you could do something like this:

  1. duplicate the layer.

  2 edit > Transform > Flip Horizontal.

  3 edit > Transform > Flip Vertical.

  4. move the layer in the position.

  

  

  If you want (need) to have a different perspective on reverse layer, so you may need to

  either convert to smart object (as you found above) or rasterize the layer (layer >)

  Dynamic objects > rasterize)

  MTSTUNER