Action Script 3 Question

Similar Questions

• CS4 with Action Script 2 question

  Here's my problem: I created a drop down list in CS4 using AS2. In my drop-down menu, I'm doing the buttons connect other labels of the scene, but he won't be going anywhere. I have no problem to link to a URL, but for some reason, even when I use behaviors so that a button go and play at the scene that I am referring to. I don't know enough about scripting to understand why this is happening.

  Try to including the number of the frame with these commands gotoAndPlay.

  _root.gotoAndPlay ("ST_Unwoven", 1);

• Action script question on a loop to a part of the line of the time

  Hi all!

  You have another question about an action script editing in Adobe Flash. Earlier this year, I asked for help to set up a script of action where the video itself would start when the user hovers over the scene and loops from the beginning to the end.

  Now, I need to adapt it so that instead of a loop all the way back to the beginning, it goes rather to the points later in the animation (for example, say 10 seconds in) rather than backwards to the beginning.

  The Script that was created for me it was:

  FLV.source = "Flash.F4V";
  flv.autoPlay = false;

  flv.autoRewind = true;
  flv_btn.addEventListener (MouseEvent.ROLL_OVER, rolloverF);
  flv_btn.addEventListener (MouseEvent.ROLL_OUT, rolloutF);
  
  function rolloverF(e:Event):void {}
  FLV. Play();
  }
  function rolloutF(e:Event):void {}
  FLV. Stop();
  }
  
  flv.addEventListener (Event.COMPLETE, completeF);
  
  function completeF(e:Event):void {}
  FLV. Play();
  }

  Now, I think that what needs to be changed is the autoRewind = true section, but being a complete novice, I don't know where to start. I've seen articles online on a goto command, but my attempts to change the code did not work properly. Any ideas?

  use:

  FLV.source = "Flash.F4V";
  flv.autoPlay = false;

  flv_btn.addEventListener (MouseEvent.ROLL_OVER, rolloverF);
  flv_btn.addEventListener (MouseEvent.ROLL_OUT, rolloutF);

  function rolloverF(e:Event):void {}
  FLV. Play();
  }
  function rolloutF(e:Event):void {}
  FLV. Stop();
  }

  flv.addEventListener (Event.COMPLETE, completeF);

  function completeF(e:Event):void {}
  FLV. Seek (20);  use the right time

  FLV. Play();

  }

• Is it possible to group objects, which are placed in the project and then hide them with line a single action-script? THX in advance, Philip

  I work in CP 9 and I'm going to try the following: the user must be able to make ALL invisible or visible to highlight boxes by clicking on the corresponding button on the first page layout. Thus, for example, if the user does not want the highlight boxes appear, click on "Hide the boxes" and boxes are hidden for the rest of the project. I managed to get to this point for help... but it is still a lot of work for me to manually enter all the different names of these boxes in the action-script. So my question is: is it possible to group objects, which are placed in the project and then hide them with line a single action-script? THX in advance, Philip

  Actually... releasing the CpExtra HTML5 widget, it will be possible.

  It has a function called @syntax that allows you to perform an action (for example HIDE) automatically on any object throughout a project of Cp9 simply based on the name of the object.

  So for example, if you named all the boxes to highlight you want hidden this way to have the suffix _HideMe and you say CpExtra you want all of them hidden if a user variable is assigned to a certain value, then that is what will happen.

  That's the good news.  The bad news is that the widget is still in BETA final tests at the moment, so you may need to wait a bit before you can realize your idea.

• How a beginner can learn Action Script?

  I don't have a technical background, but I've been addicted to Flash for 2 years.  Where can I find really Action Script?  (Should I be worried?)

  If you have trouble is a good question.

  I think you'd be better to learn javascript if you're thinking about 10-40 years from now.  JavaScript been around and looks like he will stay longer than actionscript.

  However, actionscript and javascript are very similar so if you want to use flash learning you earn will be widely applicable to javascript.

  For more ActionScript, use the help files adobe and tutorials of senocular (senocular.com).

• Action scripts when the PDF opens in the browser

  I may be in the wrong forum or can answer this question already

  I think that the answer will be no. but thought I would ask

  I use Adobe Pro and our institution as a whole has a license for Adobe Pro

  I wrote a script of Action that retrieves certain pages of a document package, some of them emails, records some of them and destroy them before that parts of the package that need signed are printed

  Here's my number

  We have Adobe Pro xi

  Windows 7

  THAT IS TO SAY 10

  The formula in question is generated from a browser application. All employees have the ability to go into tools - manage add-ons - and enable or disable Adobe Reader

  Mine is always disabled

  Several members of the staff have it turned on and open the document in the browser

  -so far all document javascripts I have written have worked anyway

  Action script though - I can't call when I go and activate Adobe Reader as the only elements that show to the staff's signature and comments form. The 'Tools' option is not there, and this is where my action script.

  I could force the staff to open in PDF format - but they won't be happy if I force this option

  is far from having the tools - and so my action script work if they open the PDF file in the browser?

  I guess I could try to do all the action script code in a JSButton if this is not possible, but action script allowed me to break the code into the section

  Thank you

  Acrobat/Reader install a limited Player plug-in and allows only some features that allow to interact with the file PDF is displayed in the browser for playback and recording. It does not features.

  If you need this plug-in, save the PDF file on the local system, and then open the saved PDF file.

• Advanced action scripts - y at - it a variable that tells me which button is clicked?

  Lilybiri gave me some great tips on the use of conditional tip action scripts. Now, I have another related question.

  I have three buttons A, B and C. Each button performs exactly the same series of actions to hide everything on the page, but shows another group of objects depending on which button was clicked - that is, to display the Group A and Group B group C.

  Currently, I have a separate advanced action script for each button (in fact a lot more than three) because of this difference, then want to combine in a single conditional script. However, I can't understand how I would like to know which button was clicked.  In other words, I think that my conditional script should look like this:

  The condition "always."

  If 1 is equal to 1

  [Script to hide all]...

  Continue

  Condition 'has '.

  If MyButton is equal to 'A '.

  See the group_A

  On the other

  Continue

  Condition 'B '.

  If MyButton is equal to 'B '.

  See the group_B

  On the other

  Continue

  Condition 'C '.

  If MyButton is equal to 'C '.

  See the group_C

  My problem is that I don't know how to set or get the value of MyButton to perform conditional tests. Is there a system variable that returns the value of a selected object? I looked at all the variables, and I don't see one. Or y at - it another way to do what I'm missing?

  You probably can find with Javascript, but not with advanced actions. All the available system variables that can be used - there are more - are in a table that you can download here: System variables in Captivate 8 - Captivate blog

  I have several articles on the shared use of stocks. You apply the same instance of a common action several times and don't have that to indicate parameters, in your case these parameters will be for most groups and objects. I hope that stocks shared will expand more in the future. They have several advantages: given that you use multiple instances of the same action that they do not increase the file size as duplicate advanced actions. In addition, you have them in the library that makes management much easier.

• createjs Flash cs6 export do not action script

  Hello

  I had installed cs6 in my laptop (trail version). Basically, I am programmer Action Script 3.0. I'm trying to develop an application and create the js file. I have programming using simple drag and drop functionality. his work in the swf file. Once I publish js his does not work. And I faced questions of the text. You guys can let me know that I was wrong.

  Find attached test files.

  Thank you
  Virginia chatelain

  CreateJS will not translate your actionscript code to javascript.

  Search for tutorials on the subject that will show you how you can replicate the features of AS3 with Javascript

• Action Script Code to disable AutoPlay

  Hello.

  
  Quick question, I hope that simple.

  I have following code to play a video FLV is flash

  import fl.video.MetadataEvent

  flvPlayback.addEventListener (MetadataEvent.METADATA_RECEIVED, onMetadata);

  flvPlayback.play ("Movie.flv");

  How to encode the Action Script to set AutoPlay to 'false '?

  
  Thank you
  Javier

  Using the ".load" instead of .play method

  Who should take over the video instead of play immediately.

  ~ Plystire

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• After you create the action script for the creation of user Oracle DB - connector DBUM

  Hello

  After we have set up a user of IOM in the database on the target system, you must insert the same user in the RLS_USER_GROUPS table. (INSERT INTO CAMPDB. The VALUES of RLS_USER_GROUPS ('DV < user name >', RLS_DEV');  )

  The requirement is available to the user of multiple databases (different values of SID). But, the user to insert in a table to a database (DB1).

  If I write an after create a file of Action with action script, it will fire for all databases?  How to trigger this script only on the DB1 database?

  (2) in the literature, it is mentioned as below

  (Q) I installed the connector only in IOM (there is no connector server). Thus, in the 3rd and 5th stage, what should I mention

  Key code?

  Decode?

  

  Please suggest

  Thank you

  This query has worked well.

  INSERT INTO CAMPDB. RLS_USER_GROUPS (USERNAME, GROUPNAME) VALUES ({__NAME__}, "RLS_DEV")

• I need help on the matrix of action script 3.0

  I need help on the matrix of action script 3.0

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  to apply a matrix for mc mat oppose:

  var mat: Matrix = new Matrix;

  mat.a = Whatever;

  mat.b =

  mat.c =

  mat.d =

  mast. TX =

  mat.Ty =

  MC. Transform.Matrix = Matt;

• Action Script to add a node value parent for the top node

  I need to add a new value of the node parent to a hierarchy to the top node.  The script parameters to add a node is "Add | Version | Hierarchy | Node | Parent Node. Property sheet. "  I am at a loss on what to do for the top node because there is no node Parent above this level, but the settings ask him.  I have reviewed the manual and the manual of admin, but did not help.  Can someone help me?

  Thank you!

  You have the answer with you, do not be confused between the Parent node and the top node context, when adding a new node, the node of your Top will become your Parent node.

  ' Add | Version | Hierarchy | Node | Parent Node. Property of the worksheet.

  If you're still confused, just do the following.

  1. right click on the node of your top and add a new worksheet or node branch manually

  2. Once added, go back to the homepage-> Script

  3. Select the Type of Source in the paper transactions, and then select the newly added node and load

  4. in the lower part select Script-> download-> Download Action Script.

  5. open in a Notepad and use to create your new script.

• Convert a HTML5 canvas 3.0 action script?

  Hello world

  I made an animation in HTML5 to realize now that I should have used action script 3.0. Is there a way to convert the document or move all my layers and images to a new document action script 3.0?

  Thank you.

  Copy / paste works, but also look at the menu of commands. Here, you can change other document formats.

• the path to import actions (script)

  I received a few actions (scripts) extencion .atn to a join a friend the old version of Ps, there was a simple way to import them in Ps, but Ps cc version in 2014 no way. But in my opinion they must be a way with the finder to search for the folder where to put them.

  Y at - there someone who can help me with this problem.

  THX.

  Actions or Scripts?

  The files are clearly named "Actions" and "Scripts" in the English installation at least.