action script... assistance in the use of components

Similar Questions

• Use the standard action and action scripts conditional on the same blade upon entry

  I want two different types of action to run on blade scripts enter the same blade, one second apart.

  1 script: fill a variable with the current date.  It is a standard action going right.

  2nd script (run 1 sec after the first script): If the above variable is greater than the current date, follow these steps.  It is a conditional action.

  How can I get Captivate perform these two actions in the same blade?  I can do if 1 script is located on the previous slide and the script 2nd on the second slide.  However this does not look good.  I want these two scripts to run on enter the same blade.  I use CP8.  Any suggestions would be greatly appreciated.

  Thank you

  Sharon

  You can use the two decisions, the first decision designating a standard simulated action by using a condition that always leads to True:

  First decision "always."

  IF 1 is equal to 1

  Assign the v_one with...                         the commands of your standard action

  Second decision «...» »

  IF v_one is equal to cpInfoCurrentDateString your conditional action

  However, in CP8 it is NOT possible to delay of 1 orders dry, this is only possible in CP9. Why you want to defer checking?

• How can I write action script 3 in the script window?

  Hello

  I am not able to write any code to ActionScript 3 editor. The following error occurs. Help, please.

  No selected action.

  The snapshot of the error is attached.

  Kind regards.

  Stop() should be stop(), without capital letters.

  For your first assignment, it seems you were in script assist mode, where I think you need to use forms and controls to enter code (select a control and click on the + sign, etc.).  If you turn off you should be able to manually enter your own code.

• The use of components in MXML QNX?

  Hello

  I'm trying a Flex Mobile with Burrito project and that you want to use the components QNX as QNXStageWebView (or any other component QNX, in fact) but with MXML (I don't think that there is another way now to integrate a browser, please correct me if I'm wrong). Try using does not work... Is it possible to do it again?

  I think I've seen similar issues but I have not found a solution.  Someone has said that wrapping the QNX components in the UIComponet work wrapper ( http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/QNX-controls-and-Spark-MX/td-p/62... ) for them, but I'm not sure how to do this?  Someone did (and if yes, could you please share an example)?

  Also, if possible, are there downsides to doing this?

  Thank you!

  OK the use cases of the use of QNXStageWebView is easier, then make QNX UI components as has been said. To that end, here's how you would do it:

  Include the qnx - air.swc to a Flex Mobile project (0.9.0) (do not include the package to build Flex-> BlackBerry Tabel-> include libraries box as he immediately a compile error).

  
  http://ns.adobe.com/mxml/2009"
          xmlns:s="library://ns.adobe.com/flex/spark" title="Home">
  
      
          http://renaun.com";
                  webView = new QNXStageWebView();
                  webView.enableCookies = true;
                  webView.enableJavascript = true;
                  webView.enableScrolling = true;
  
                  webView.addEventListener(Event.COMPLETE, loadWebView);
  
                  webView.loadURL(url);
              }
  
              private function loadWebView(event:Event):void
              {
                  var startY:int = localToGlobal(new Point(btnClick.x, btnClick.y+btnClick.height)).y;
                  lbl.text = "Stage W/H: " + systemManager.stage.stageWidth+"/"+systemManager.stage.stageHeight+" - " + startY;
                  var rect:Rectangle = new Rectangle(0, startY, systemManager.stage.stageWidth, systemManager.stage.stageHeight - startY);
                  webView.viewPort = rect;
                  webView.autoFit = true;
  
                  webView.stage = systemManager.stage;
              }
          ]]>
      
  
      
          
      
      
      
  
  

  Complete code and write my post here:

  http://Renaun.com/blog/2010/12/using-Playbooks-qnxstagewebview-with-Flex-hero-mobile/

• The use of components bootstrap - access denied.

  Good Morning-

  I created a page that uses the built in components DW CC2015 Bootstrap.  Downloads page, but the bootsrap.css, the jquery and the bootstrap.js do not have.  It says access denied, or it could be a permission problem.  Is there something special at the server end which would prevent me to download these components?

  Then, I happened to get out of a button from the model "bootstrap" included with DW and replaced by another type.  Turns out she needed to generate a new updated bootstrap 3.3.4.css and a new 3.3.4 bootstrap js.  All I know is the blue and green buttons that I removed a path for success!   I was able to download without any error.

• Assistance in the use of NavigationRequest in the user interface

  Hello

  I would like to understand the use of NavigationRequest - I saw this example in samples of vmware where we can create customized including click links can navigate to pages specific object

  /////////////////////////////////////////////////////////////////////////////////////////////

  private void onLinkButtonClick(click:MouseEvent):void {}

  Go to display settings

  var event: NavigationRequest = new NavigationRequest();

  event.targetViewUid = "com.vmware.samples.chassisCollection3.domainView".

  Event.Context =?

  dispatchEvent (event);

  }

  /////////////////////////////////////////////////////////////////////////////////////////////

  The navigation above translates the global page - https://localhost:9443/vsphere-client/#extensionId=com.vmware.samples.chassisCollection3.domainView

  However, there are other specific pages to which we would like the navigation links. For example, in the example above, if we wanted to return to a specific context (say the frame = > summary page) like the following ""https://localhost:9443/vsphere-client/#extensionId=com.vmware.samples.chassis.summary;context=com.vmware.core.model%3A%3... ", then set up the NavigationRequest seems to be difficult." It seems that this implies the implementation of the 'event.context' to the 'right' of IResourceReference object.

  My question is = > how can I get access to the IResourceReference reference to a custom object in a view that does not have the reference to the custom object. Is - a can derive the IResourceReference to the URI of a custom object? Please highlight the possibilities here.

  Any help is appreciated.

  Thank you

  What is explained in the other thread: Re: Navigation providing the vSphere objects

  You must call the ObjectReferenceService to make this conversion.

• You are looking for assistance on the use of CSV with InDesign files for merges data...

  Hello

  Please forgive me if this has been discussed in this forum already. If so, please point me to this discussion.

  What I'm trying to do, it's a data merge InDesign with a (CSV) file delimited by commas. I created the CSV file by using the command "SaveAs CSV" with Office Excel 2013. The problem I have is with records that contain multiple lines in the same area. After reviewing the merged InDesign document, I noticed that the results are inaccurate for the rest of this record. When it gets to the record following some fields are filled with the remaining records of the previous record.

  I'm sorry if I'm not explaining this very well, but the results are strange and I hope others have similar results and can offer a solution.

  Thank you

  Greg

  You can't have line breaks in a cell. The solution is to use a code for the break, and then run find/replace after the merger to change the code to break you.

• virtualization of material assistance and the use of physical memory

  workstation6.5 use any technology hardware support? In addition, the virtual machine uses all physical memory? I find there's a .vmem file that I think it's a kind of memory for the virtual machine file. It would be even better to use the memory of phsicial, or Don't matter? I used Microsoft VPC and VMWare is new to me.

  Thanks in advance

  llvc wrote:

  workstation6.5 use any technology hardware support?

  Yes. See products VMware and hardware support for virtualization (VT-x/AMD-V).

  In addition, the virtual machine uses all physical memory?

  Yes, indeed.

  I find there's a .vmem file that I think it's a kind of memory for the virtual machine file.

  This file contains the image of the memory of a suspended virtual machine.  When a virtual machine is suspended, it uses all of the physical memory.

• script to summarize the use of the total disc of virtual machines

  How can I summarize sizes total vmdk (not thin) of a list of virtual machines in vc?

  Hello, once again-

  I see your second post.  Yes, you could go that route, too.  You are close to, simply add in a Measure-Object call.  A little cleaned up, it would be like:

  $machines = Get-Content c:\servers.txtGet-VM -Name $machines | Get-HardDisk | `    select @{N="VMName";E={$_.Parent.Name}},@{N="Capacity(GB)";E={[math]::truncate($_.CapacityKB / 1MB)}},Filename | `    Measure-Object -Property "Capacity(GB)" -Sum
  

  How does do for you?

• dynamic text - defined in the action script

  I inherited a .fla file that has a movie containing the ActionScript below (see attached code). I used the debugger to find the path of a film which is created dynamically. I used also the movie Explorer to find all the possible variables and can not find where the actual text (which is what I see in the final flash) is defined/assigned.
  
  Ironically, when I open the .fla with a text editor file, I see the following types of assignments scattered through, but I am not able it locate these action scripts in one of the objects in the FLA:
  
  ...
  {onClipEvent (load)}
  ' This.Text ="Photos of leaves.
  }
  ...
  {onClipEvent (load)}
  Photos of This.Text = "Flowers"
  }
  ...
  
  Anyone know how I can search the .fla to find and reassign these values? It is possible that there is a built-in object that I can't edit? Pourraient values from an external file even if I don't have a .fla and it works without error when I publish?
  
  Gabriel

  I found where gets assigned to the variable of text...

  Given that the text has been assigned by the parent company, I went through all the object to find that one was instantiating the film containing the code mentioned above. When I found it, I looked at the code but it have no action script annotated on the timeline. By accident I clicked on the scene (at the center of the parent object, I searched for) and I just happen to have the actionscript window open when I saw the following...

  {onClipEvent (load)}
  This.Text = "Text I was looking for"
  }

  Thank you for helping me to think about it per. I forgot that the timeline does not show an 'a' on the framework if it is a keyframe to the instantiation of an object. It's a shame that these types of actionscripts are not available!

• Action Script HELP

  I have a web site template, have 4 links that go to other scenes (type button with rollover effects links) I'm trying to make these buttons link to pages html (URL) instead... I found the action script that makes the effect of substitution and links to another scene in... but did anyone know how to make sure it had an effect of substitution but links to url instead of the scene? Here are his... I think I have to put it on the roll out or release but do not know and do not know what to leave and what to go out

  Thanks in advance!

  
  {onClipEvent (load)}
  Num = 2;
  }

  {run}
  If {(_root.link <>num)
  this.gotoAndPlay ("s1");
  }
  }

  on (deployment, releaseOutside) {}
  If {(_root.link <>num)
  this.gotoAndPlay ("s2");
  }
  }

  
  {We (Release)}
  If (_root.link <>num and _root.animation == 1) {}
  this.gotoAndPlay ('s3');
  _root. Animation = 0;
  _root.link_prev = _root. Link;
  _parent ["item" + _root.link] .gotoAndPlay ("s4");
  _root. Link = num;
  _root.pages.page.play ();

  }
  }

  You want to use the getURL() function to navigate to another web page instead of the gotoAndPlay or similar controls.  I do not know what lines you must stay, so I'll remobve them all since it will go to a new web page in any way...

  {We (Release)}
  If (_root.link<>num and _root.animation == 1) {}
  getURL (http://www.somesite.com' ");

  }
  }

• Action Script 3 Question

  I have a problem, I have a flash site that I am building.  When the site loads up, it will go through the opening animation and then go to the home page (which is a clip in the clip) and when he goes to the home page continues to play this movie again and again clip animation.  I used Clipname.stop (); and Clipname.Clipname.stop (); both imagined errors saying that the Clipname is not a defined property.  So I put stop(); in action script and now the code XML does not load in the page. Here is the code for the home page:

  (The code is Scene1-> content (movieclip: frame 1)-> ContentHome (another Movieclip):)

  
  var xmlholder:URLLoader = new URLLoader (new URLRequest("home.xml"));

  xmlholder.addEventListener (Event.COMPLETE, onload);
  
  function onload(e:Event):void {}
  Feed.Text ="";
  var xml = new XML (xmlholder.data);
  for (var i: Number = 0; i < xml.story.length (); i ++) {}
  feed.appendText(xml.story[i].body+"\n\n");
  }
  }
  
  var xmlholderevent:URLLoader = new URLLoader (new URLRequest("events.xml"));
  
  xmlholderevent.addEventListener (Event.COMPLETE, onloadevent);
  
  function onloadevent(e:Event):void {}
  Event.Text ="";
  var xml = new XML (xmlholderevent.data);
  for (var i: Number = 0; i < xml.story.length (); i ++) {}
  event.appendText (xml.story [i].date+"/n"+xml.story [i].storyname+"/n"+xml.story[i].body+"\n\n");
  }
  }
  
  var xmlholderpoll:URLLoader = new URLLoader (new URLRequest("poll.xml"));
  
  xmlholderpoll.addEventListener (Event.COMPLETE, onloadpoll);
  
  function onloadpoll(e:Event):void {}
  Poll.Text ="";
  var xml = new XML (xmlholderpoll.data);
  for (var i: Number = 0; i < xml.story.length (); i ++) {}
  poll.appendText (xml.story [i].date+"/n"+xml.story [i].storyname+"/n"+xml.story[i].body+"\n\n");
  }
  }
  
  I need to know where to put in a stop command. For the loop ends and can load the XML file.  If anyone can help, that would be great

  put a stop() on the last frame of the timeline that repeated suburbs.

• Help with Action script 2.0 Please

  Hello
  I'm new to actionscript and I really could with little help please. I'm loading external movie clips in two different containers depending on which button is clicked. Sometimes, there may be two conatiners attached to a buuton click, while the other buttons may only need to download a video clip. Here is the action script, I've been using:
  
  Button1.onPress = function () {}
  _root.createEmptyMovieClip ("container", 1);
  _root.createEmptyMovieClip ("Container1", 2);
  unloadMovie ("container1");
  loadMovie ("scene2.swf", "container");
  loadMovie ("scene5.swf", "Container1");
  
  Container._x = 50;
  Container._y = 110;
  container1._x = 170;
  container1._y = 5;
  }
  Button2.onPress = function () {}
  loadMovie ("scene6.swf", "container");
  unloadMovie ("container1");
  Container._x = 50;
  Container._y = 110;
  }
  
  It is responsible for the movies, but I have to press first button both work. Ideally I need to be able to call a movieclip at any time. Can someone tell me where I'm wrong?

  Try to move these lines outside the function of the button:

  _root.createEmptyMovieClip ("container", 1);
  _root.createEmptyMovieClip ("Container1", 2);

  You can use 'this' instead of '_root'... that will save any problem if you never move it to some other films. In addition, move the x / y assignments right under these lines since they relate to them directly.

• script to get the csv vm disk usage and export to csv format

  Hi all

  I am trying to create a script to get the use of disk for vm - space - free space and total disk space.

  I used this script that allows me to get the required result.

  but I need to edit the script for each cluster, VM he should get computers virtual cluster and check the vm disuage. and export of csv file

  $vms = import-CSV "C:\Cluster.csv".

  $outputfile = "c:\Diskusage.csv".

  SE connect-viserver VC-vcadmin username-password

  {foreach ($vm to $vms)

  Get - VM $vm.name | Where {$_.} PowerState - eq "Receptor"} | Get-VMGuest | Select the ExpandProperty - VMName disks | Select VMName, path, @{Name = "DiskCapacityGB"; Expression = {[math]: Round ((($_.))} {{((Ability) / 1 GB), 2)}}, @{Name = "DiskUsedMB"; Expression = {[math]: Round ((($_.))} Capacity - $_. {{((FreeSpace) / 1 MB), 2)}}, @{Name = "DiskFreeMB"; Expression = {[math]: Round ((($_.))} {{((FreeSpace) / 1 MB), 2)}} | Export-Csv - NoTypeInformation $outputfile}

  Viserver disconnect

  Joint the output file

  Veuileez help me in creating the script

  You can try like this?

  Connect-viserver VC -user vcadmin -password
  foreach($cluster in Get-CLuster){
      $outputfile = "c:\" + $cluster.Name + "-Diskusage.csv"    Get-VM -Location $cluster |
      Where { $_.PowerState -eq "PoweredOn" } |
      Get-VMGuest |
      Select VMName -ExpandProperty Disks |
      Select VMName, Path,
          @{Name="DiskCapacityGB";Expression={[math]::Round((($_.Capacity)/1GB),2)}},
          @{Name="DiskUsedMB";Expression={[math]::Round((($_.Capacity - $_.FreeSpace)/1MB),2)}},
          @{Name="DiskFreeMB";Expression={[math]::Round((($_.FreeSpace)/1MB),2)}} |
      Export-Csv -NoTypeInformation $outputfile}
  
  Disconnect-viserver
  

  The script creates a CSV file for each cluster.

• ADF and the use of the XMLType columns

  After discovering the Jdeveloper 11 g was able to generate business components/data controls for complex web services (see this tutorial excellet http://www.oracle.com/technology/tech/fmw4apps/agile/pdf/adf11g-agile.pdf), I assumed that jdev 11 g should now have the same capacity on XMLtype columns with a registered scheme, and was therefore a good match for our enforcement objectives be able to edit
  parts of an XML document to aid in the face of components and Assembly/store the document in a way centic document in a relational/XML database XMLType column hybrid.
  
  I tested this point, has created a table with an XMLType column binary, saved the schema in database (11g) and jdev(11g) and generated my components.
  
  
  I was very disappointed at the discovery of the structure of data controls stops at the level of the attribute in the table (ie the XMLType column), so none of the structure of the XML document is revealed or can be used in a meaningful way through data control.
  
  Am I missing something here? should not control data generated reveal the XML structure and allow the use of components of forms/table faces on some parts of the structure of the document? I'm not a java programmer, so was really hoping to do this with data not generated controls beans not.
  
  If it is just to treat it as a CLOB, what's the point of registered xsd schemas?

  Yes, it is through java. Sorry