virtualization of material assistance and the use of physical memory

Similar Questions

• How to reduce the use of physical memory 1 GB intel atom Win 7

  I have the Dell Insiporn Mini with the following specifications:

  1.66 ghz Intel Atom
  1 GB OF RAM
  HARD DRIVE 250 GB
  WINDOWS 7
  in the Task Manager always displays the physical memory usage about 50 to 70%. I don't have too much software installed on my laptop.
  Any body can help me to reduce the use of PHYSICAL memory...
  the use of the processor in the Task Manager is controlled to arnd 2-8%
  Thank you

  You must update your RAM to 2 GB...

  Go to Crucial.com.  This will tell you what you need...

  http://www.crucial.com/index.aspxhttp :// www.crucial.com/index.aspx

  And it will tell you how to do it...

  http://www.LapTopMag.com/advice/how-to/Dell-mini-RAM.aspx

• How to set the use of video memory on the graphics card to my laptop cq56-110us?

  Hello

  I have a PC Compaq laptop CQ56-110us.  Windows 7 says is has 797 MB video memory shared from the main memory of 2 GB.  I want to reduce the use of video memory, i.e. 256MB.  Is this possible?  If yes how.  I would appreciate help with this.

  Thank you

  Don

  Don, welcome to the forum.

  Built-in memory is allocated by the system.  As more video memory is required, is allocated.  There is no way that you can change.

  If your problem is solved, please click "accept as a Solution.

• Can approve us double the amount of physical memory

  Advanced memory management 4 vSphere mentions about the RAM overcommitment. Increase the memory usage in the configuration of the virtual machine memory that is larger than the memory of the physical server safely. For example, the sum of the memory of all the virtual machines running on a server with 8 GB of physical memory can be 16GB.

  If approve us double the amount of physical memory, will all the VM to run effectively withour rain errors?

  It really depends on the amount of memory your systems need. You can trust as you like, however as soon as the virtual machine consumes more RAM than physically available, ESX must exchange and at this stage the performance degrades.

  André

• How can I check the voltage values on the acquisition of data with a data acquisition assistant and the custom scale?

  I use a custom scale and the DAQ assistant to acquire data from a USB DAQ device.  How can I display voltage gross values at the same time?

  Thank you

  David

  Do not use the ladder custom, but read the raw data using the daq assistant and adapts the data later. Or the scale of the data using the inverse of the custom scale.

• Need to access info "header / properties" and the use of a 'peek-a-boo' feature that allows an opening not assigned an e-mail message. BOTH are necessary.

  When the list of "incoming mail is received, a few times an e-mail will have a familiar name, BUT the message is NOT the person I know.» A header would reveal which is the familiar name of MASKING. It is located on the right click of an email entering under "properties.", for those who use the Windows Mail service. Upon activation, two panels are available: "general", line information base; and the jury of "Details". [email protected]

    Here is the "Details" on your recent request:
  

  Return-Path: < 8fd.10.Ragingmt =rochester.rr.com@mxsp4.email-od.com>
  Received: from dnvrco-pub-iedge - vip.email.rr.com ([107.14.70.244])

           by dnvrco-fep24.email.rr.com
           (InterMail vM.8.04.01.13 201-2343-100-167-20131028) with ESMTP
           id <20150527165815.TQBS12014.dnvrco-fep24.email.rr.com@dnvrco-pub-iedge-vip.email.rr.com>
           for <[email protected]>; Wed, 27 May 2015 16:58:15 +0000
  

  Return-Path: < 8fd.10.Ragingmt =rochester.rr.com@mxsp4.email-od.com>
  Received: from [64.151.119.54] (helo [64.151.119.54:45118] =mail24.smtprelayserver.com)
  by dnvrco-iedge04 (envelope-from < 8fd.10.Ragingmt =rochester.rr.com@mxsp4.email-od.com>)
  (ecelerity 3.5.0.35861 r (Momo - dev:tip)) with ESMTP)
  ID 05/42-22770-6A7F5655; Wednesday May 27, 2015 16:58:15 + 0000
  DKIM signature: v = 1; a = rsa-sha1; d =email - od.com; i=@email-od.com; s = dkim;
  c = relaxed/relaxed; q = txt/dns; t = 1432745904; x = 1435337904;
  h = content-type: mime-version: subject: to: to: date: message-id: reply - to;
  BH = BorokUNlliKkKGt/h0t9J5QZRXM =;
  b = ivSHJkJVgtIuuPbdKelm8wrP9MTDBOfWi38tURaeWYyE7irIYrzg8PjdIXA/r9B3Uc8l1gJJ9blRBU2jcN + jKV4C2 + / 5tSrQSrfiqa9l5xBx81Fm8Winq6uvCxyTCUwioUwJ21eUR7FDAXlDmcg7fbRBoG2b4 + f0CvQLBrdPNxU =
  X-wire-Info: OGZkLjEyLjhhMDAwMDA3NmJmNzIzLlJhZ2luZ210PXJvY2hlc3Rlci5yci5jb20 =
  Received: from r2.us - West - 2A .aws .in .socketlabs .com ([54.186.58.227]) by mail30.email - od.com
  with ESMTP; Wednesday, may 27, 2015 12:58:23-0400
  Received: from support3.webapp.phx1.mozilla.com ([63.245.216.223]), of r2.us - West - 2A .aws .in .socketlabs .com
  with ESMTP; Wednesday, may 27, 2015 12:58:14-0400
  Content-Type: multipart/alternative;

    I do NOT have this option on the right-clicked menu.
  

    Yes, I have been fooled, BUT, with a name of an extended family member, who questions such?  However, the message came from an unknown party, pushing some product from Oprah.   I check now.
  

    There are also e-mails I may NOT wish to indicate that I have "read" them via the formal opening process.  I call this the "peek-a-boo" method of opening an e-mail, as it is NOT a formal opening, per my research.  The point is that NOT all you see on the screen IS what you ARE seeing.  Thus the old saying: "Seeing IS believing.", is NOT true.   This is a more current peeking process, an advancement on the old "300 watt bulb behind the envelope" method of finding out contents withOUT opening the letter.  This applies to a sender I am familiar with BUT, the current topic is NOT of interest to me.   Thus, I can use the "Delete" function with complete satisfaction.
  

    Therefore I wish to know HOW I can gain these two features on THUNDER BIRD e-mails?
  

  Thomas J. Baglin
  [email protected]
  27/05/2015

  R.M. said

  Thank you, you, Matt.
  Regarding the "peek-a-boo," about 15 years ago, it was somewhat revealed the Web that some shippers had the ability to detect IF you had opened their missive.

  This is handled by the Web beacons. Thunderbird blocks remote images by default. Web beacons work only if you enable the remote images in specific email.

  From THIS time, it is the GOVERNMENT that has the ability to detect if you open all or part of your receipts "Entrants".

  Interesting point of view, but not quite corr4ect. f they have access to a mail server IMAP "could" determine the status of mail on this server. In the case of POP e-mail that could determine if it has been downloaded. While I do not trust of Government oversight. About the only time where they would do that would be when they are already studying you as an individual. It's a slow late then.

  So, WHY Windows Mail offers this function and the T-bird, NO mail?

  I played with Visual basic using integrated Internet Explorer about 15 years ago and it was a simple toggle to change the display of the HTML displayed in the source. So I would say it is in windows mail, because he was already in Internet explore and it made for a very simple to implement the functionality. Just expose the existing functionality. After all the composition and rendering in Windows mail used Internet explorer.

  Although the header can help tremendously, , what I SEE is NOT NECESSARILY WHAT THAT REALLY is the content of the e-letter.
  

  This is a feature of Thunderbird. It uses the display names from your address book on incoming mail. You can disable it in the menu (alt + T) tools > options > advanced > reading and posting.

  If the follow-up can be done via the 'Key STROKE' method, and YOU do NOT know of it, then a "peek-a-boo" is useful to have, huh?

  Keyloggers are all also able to capture screens and clicks. If your number more ahead.

  It makes me feel, I have a FEW C-O-N-T-R-O-L that I CHOSE to read, and what I based on the content and subject.

  Seriously. encryption of e-mails with s/mime and free email certificates will do more to protect your mail that any kind of fake check before you read. Most of the people may face apparently not having a certificate of personal mail to encrypt their mail and like most internet technologies, we get the lowest common denominator. This is the plain text that scours the internet to an ordinary human-readable text.

  Please when using these forums not your text indent. This is what makes it become very difficult to read and not wrap. I don't know that that is how you were taught in school. I learned the same thing. But it must comply with the requirements of the opportunity.

• Creation of my own CA, self-signed certificates and the use of these

  I'm stupid. Three years ago, I created my own CA and my own wildcard certificate for my OS X Server (always 10.8.5 with Server 2.2.5). I install my public Root CA on clients who make use of my server. At these must not often updated and the work is complex, so I created a CA Vault take care of a few scripts and configuration of openssl. What I forgot is document how to get these used by Server.app. That's why I'm stupid, because I struggle to reproduce what I did and discovered three years ago.

  I use two scripts. (MYNAME, mydomain and tld are generic strings, of course in reality I use my own name and mydomain.tld)

  The first is for the creation of a root certification authority:

  #!/bin/bash
  
  # Only edit these:
  mycaname="MYNAME Certificate Authority"
  myrootname=mydomaincaroot
  
  # Run in current dir:
  mydir=`pwd`
  
  mkdir RootCert >/dev/null 2>&1
  
  if [ ! -e "$mydir"/RootCert/"$myrootname".key -o \
       -e "$mydir"/RootCert/"$myrootname".crt ]
  then
      openssl req -config "$mydir"/openssl.cnf \
    -new -x509 \
    -keyout "$mydir"/RootCert/"$myrootname".key \
    -out "$mydir"/RootCert/"$myrootname".crt \
    -days 3650
      openssl pkcs12 -export -clcerts \
    -inkey "$mydir"/RootCert/"$myrootname".key \
    -in "$mydir"/RootCert/"$myrootname".crt \
    -out "$mydir"/RootCert/"$myrootname".p12 \
    -name "$mycaname"
  
      echo "Now import ""$mydir""/RootCert/""$myrootname"".p12 in KeyChain"
      echo "For this, unlock the System KeyChain first, then import"
      echo "NOTE: this imports your private key in the System Keychain"
      echo "So it can be used for signing activities."
      echo "This is less safe then keeping your private key on media that"
      echo "cannot be accessed from the system, like a safely stored USB stick"
  else
      echo "Your root CA crt and key already exist! I will not overwrite this"
      echo "as this could overwrite a still used private key and lose you access"
      echo "to signed certificates, e.g. for revoking them"
  fi
  

  I think I know what to do (but Advisor is always welcome). I have to add the certificate of generic identity for the Keychain system, after which I can use in.app.

  Now I encounter another problem: when I enter the certificate in the system Keychain, it ends up in/etc/certificates without a. fichier.pem. See: OS X 10.8.5 Server 2.2.5/Keychain Access certificates issue for more details.

  Help is always welcome.

• Memory and the use of the disc on my IDS 4235 sensor &amp; 4250.

  My ID sensor memory usage shows a use of 99%, and the hard drive is already 5 of the 15 Gig. Here is the log of "seeing the worm."

  With the help of 398913536 of 1980493824 memory available bytes (99% of use)

  With the help of 5 of the 15 bytes of disk space available (66% of use)

  -only the signature of med and high seriousness is enabled. Why the sensor used this memory?

  -Is this the sensor has IDS to a database that stores the logs which causes the hard drive used space? (considering that she has the management of the IDM)

  - Or any other reason why the hard drive used whereas the large drive space is new and operating time is 2 months?

  -Update of the signature file is adults who took over this large space on the HARD drive?

  Hope - could someone give me an idea why is it so.

  As I said earlier, there is not a problem with the use of disk space. Memory usage bug is fixed in the 5.X product not 4.X. However, there are some good bug fixes in the patch of engineering 4.1(4g).

  The number of real memory usage can be determined from the service account by entering the following command:

  Bash-2, $05 free

  total used free shared buffers cached

  MEM: 1934076 1424896 509180 0 18284 1214536

  -/ + buffers/cache: 192076 1742000

  Swap: 522072 0 522072

  The "Mem:" line and the column 'pre-owned' is the amount of memory (in kilobytes) that

  the command reports "show version". However, this total includes the

  amount 'caching '.

  So in the example above, the actual memory used is (1424896-1214536), or

  210360 KB. It is (210360 / 1934076 * 100), or 10.9% of total memory.

• question about sending mail and the use of UrlEncodedPostData

  Hello

  I need to send over https three things:

  (1) framework, which is a byte [] object, and has some information about the device and the things that need to be sent to the server

  object String 2) imei - imei of the device.

  (3) data - some data, which are a String object

  now I need to use URlEncodedPostData, but...

  UrlEncodedPostData _post = new UrlEncodedPostData(null, false);
  
  _post.append("frame", ???)-> my frame is a byte[] object
  

  so, what should I do? should I change channel frame? but, later when I send the _post to the server that I use:

  _httpConnection.openDataOutputStream(_post.getBytes());
  

  YH, the problem is-how to put a byte [] object to the urlEncodedPostData and then send it?

  The point of encoding is to ensure that special characters can be detected correctly.  There is no URL address, as the settings.

  You will notice that the class that you are trying to use is called URLEncodedPostData.  I don't know if the same URL encoding is used in BOTH and given POST, but I think this class should be used in the data of PUBLICATION, rather than to GET data (look at the name).  You will find that the process of encoding data GET is not so difficult and I don't know if you look you will find J2ME coding code on the Web, that will help you create correctly to GET URL format.

  However, I still think you should consider the difference between GET and POST, and what data is passed by each type of application.  I think that if you had done that earlier, you wouldn't be in this position, you understand better my answers and you will understand how to create the queries POST you have to best use later.  GET and POST are NOT Blackberry or specific RIM, they are the Web specifications and used on all platforms.  There is a lot of documentation out there.

• HP Photosmart Plus B210e print is not on MacBook Pro running Lion and the use of Airport

  HP Photosmart more B210e

  MacBook Pro running Lion and using Apple Airport

  Cannot print

  Cannot find printer

  Printer reinstalled with no luck

  Help, please.  Thank you.

  Hi jpjones2,

  It worked before? If so, I suggest restarting the base station AirPort, Mac and the Photosmart. Then test it again. Ensure that the Photosmart works well autonomous - try printing a copy on the device.

  Is only the failing printing and analysis very well? Or you are not able to install the device on your Mac at all?

  Already check the Photosmart is connected to your network and has received an IP address?

• ADF and the use of the XMLType columns

  After discovering the Jdeveloper 11 g was able to generate business components/data controls for complex web services (see this tutorial excellet http://www.oracle.com/technology/tech/fmw4apps/agile/pdf/adf11g-agile.pdf), I assumed that jdev 11 g should now have the same capacity on XMLtype columns with a registered scheme, and was therefore a good match for our enforcement objectives be able to edit
  parts of an XML document to aid in the face of components and Assembly/store the document in a way centic document in a relational/XML database XMLType column hybrid.
  
  I tested this point, has created a table with an XMLType column binary, saved the schema in database (11g) and jdev(11g) and generated my components.
  
  
  I was very disappointed at the discovery of the structure of data controls stops at the level of the attribute in the table (ie the XMLType column), so none of the structure of the XML document is revealed or can be used in a meaningful way through data control.
  
  Am I missing something here? should not control data generated reveal the XML structure and allow the use of components of forms/table faces on some parts of the structure of the document? I'm not a java programmer, so was really hoping to do this with data not generated controls beans not.
  
  If it is just to treat it as a CLOB, what's the point of registered xsd schemas?

  Yes, it is through java. Sorry

• Assistance in the use of NavigationRequest in the user interface

  Hello

  I would like to understand the use of NavigationRequest - I saw this example in samples of vmware where we can create customized including click links can navigate to pages specific object

  /////////////////////////////////////////////////////////////////////////////////////////////

  private void onLinkButtonClick(click:MouseEvent):void {}

  Go to display settings

  var event: NavigationRequest = new NavigationRequest();

  event.targetViewUid = "com.vmware.samples.chassisCollection3.domainView".

  Event.Context =?

  dispatchEvent (event);

  }

  /////////////////////////////////////////////////////////////////////////////////////////////

  The navigation above translates the global page - https://localhost:9443/vsphere-client/#extensionId=com.vmware.samples.chassisCollection3.domainView

  However, there are other specific pages to which we would like the navigation links. For example, in the example above, if we wanted to return to a specific context (say the frame = > summary page) like the following ""https://localhost:9443/vsphere-client/#extensionId=com.vmware.samples.chassis.summary;context=com.vmware.core.model%3A%3... ", then set up the NavigationRequest seems to be difficult." It seems that this implies the implementation of the 'event.context' to the 'right' of IResourceReference object.

  My question is = > how can I get access to the IResourceReference reference to a custom object in a view that does not have the reference to the custom object. Is - a can derive the IResourceReference to the URI of a custom object? Please highlight the possibilities here.

  Any help is appreciated.

  Thank you

  What is explained in the other thread: Re: Navigation providing the vSphere objects

  You must call the ObjectReferenceService to make this conversion.

• Use of the Task Manager physical memory is not not to use processes

  I have seen this topic discussed it before, but I did not understand what is happening here.

  -J' have one windows server 2008 with 8 GB or ram configured, with the limit set to unlimited and booking made 8 GB.

  -When you look in the Task Manager, I see the physical memory to 88% and the bar bed to 7.10 GB.

  -Adding all process memory usage, it is only about 2 GB.

  -In another thread, that I read that it was because he had a deadline, and hot air balloon began.

  -J' I monitor the server via SNMP and have alerted all the time that this server joined more than 90% ram usage.

  -The Guest server is correct use of the physical memory Task Manager?

  -If it is not, and is caused by the ESX host, how can I fix it to properly monitor the comment server.

  

  

  The question here is how windows works,

  You reserve memory and don't have no limits, so there is no balloon showing VMs to appear that they have high memory use when they are not actually in some cases.

  Processes that Task Manager displays is not all that is running or being eaten, I know when working with SQL, you have FEAR that can use a ton on memory, but there is no process to show.

  Best thing to do is to run RAMMAP a sys internals tool that will show you exactly what is using the memory in windows.

• Warnings on the use of virtual memory machine

  Hello

  Have a question about the difference between ESX 3.5 and vSphere 4. I have 4 vSphere ESX 3.5 and 2 4. On ESX 3.5, the memory usage is much lower, then the ESX 4 for the same machine virtual.

  Example: SVR2003 TS with an average of 20 users defined, running the same application.

  On ESX 3.5: HP ProLiant DL380 G5 with 16 GB of memory, two processors running on 3 GHz (4 logical processors without Hyperthreading)

  Granted memory: 2.134.016 average KB

  Active memory: 313.342,33 average KB

  On 4 ESX (vSphere) HP Proliant DL380 G6 with 16 GB memory, Quad processors running on 2.8 GHz (16 logical processors with Hyperthreading)

  Granted memory: 2.097.152 average KB

  Active memory: average 1.987.864,5 KB

  As you can see there is a big difference in the use of mem. We therefore always mistake alerts and warning of our Center Virtual whiel I can find nothing on the configuration of the virtual servers, as well as on the machine of vmware.

  Does someone had the same problem, and what can we do about it...

  THX

  Walter

  This was thoroughly examined several times.

  See http://communities.vmware.com/thread/211585?start=90&tstart=0.

  Make sure you have the hotfix mentioned in http://kb.vmware.com/kb/1014019 installed.

  Use of the memory of the guest operating system may be overrated on systems Intel that supports technology EPT or AMD supporting IVR technology. This issue may cause alarms memory in vCenter falsely goes even if the client accesses not actively a lot of memory.

• Use of physical memory in Windows 7

  OS: Windows 7 Home basic

  The computer shows the use of high physical memory (40-50%), even when idle. It is difficult to identify which processes at the end I tried to run msconfig, but I don't want to end a process of essential start-up. How to reduce the physical memory leak. I've also seen the resource monitor. Maximum use is MsMpEng.exe svchost.exe, HPSF.exe, CCC.exe, MOM.exe

  Your computer freezes up? Or it works exactly as you hope?
   
  Windows 7 allocates memory as many processes running as it can. It also caches memory for everything that was running and is likely to be revived by the user.
   
  It's a good thing because the free memory does nothing, nada, and it's a waste.
   
  You can see from the process Windows is changing things around. It is what keeps your computer works well and once again is a good thing...

  Mike Hall MVP - Windows Expert: consumer http://msmvps.com/blogs/mikehall/