Action Wizard: options when saving PDF are not exported

Similar Questions

• How to find vCenter virtual cluster large when the services are not running?

  Does anyone have advice for locating vCenter in a cluster, when his services are not running?

  For example, I have to restart vCenter and its network is having issues.  I need to go to the host ESX (i) is on and open the console to get to the virtual machine.  But to find that host is on can sometimes take a long time, because I have to log in to each HOST and see if it is the host where vCenter.

  Does anyone have any advice or suggestions to make this process easier?  It is not so important, but just curious to know what others might suggest.

  Thank you.

  I used PowerCLI and

  to connect-viserver esx1, esx2, esx3

  connect to all the ESX(I) hosts and then run

  Get - vm vCenterServerName | Select the name, the host

• The defining Action Wizard which saves the PDF as a Jpg only 200 dpi?

  Hello

  I'm trying to use the Action Wizard in Acrobat to open PDFs MultiPage and their output in JPEG format. It works fine, but will not let me set the DPI for the JPEG? They come out of 200 DPI, but I need 300... I checked the preferences, but I can't find anywhere to change this setting. Back - does anyone know how I might be able to do this?

  My goal is to be able to open multiple pages pdf files and save each page save a JPEG file. I can do a Photoshop action. because it opens only the first page. It's narrow, but only if I can change the DPI.

  Any thoughts!
  Babs

  Hello again...

  In fact, I had 300 DPI images to work off Acrobat... I just had to make that the default on a document open... then when I ran action, it's default to the last used setting

  Babs

• The images appear when printing that are not on the screen

  Sorry if this has already been covered - I can't find an answer with any of my research...

  I use Indesign CS3 in a Vista environment.

  I created a document in CS3 that contains images tiff, jpeg and pdf placed in it.

  Everything looks fine on the screen, but when I print a test in black and white on my HP laserjet pages contain an image where a 'ghost' of the image above it on the page is printed on it.

  "Ghost" images are always compensated by about 1/3 - 1 / 2 of the picture, they are printing on and disappear if I move the image of the 'ghost' comes off on the side.

  The "ghost" does not appear on pages where there is one picture above the other, does not seem to be limited to some combination of file types.

  It is not on the page outside a rectangle areas encompassing.

  I've tried mucking around with some print settings, but my knowledge is a bit limited in this area.

  This happens if I print all right out of InDesign or if I export the document as a pdf and print from that.

  I've never had this problem before using previous incarnations of this software and you want to go coloring print until I know if this might just be an artifact of the test B + W printing process, or if it's something else.

  Thanks for your help.

  Mingstru.

  First the good news. It's not your software, everything works fine.

  Now, the bad news; It's the printer... the easiest way to make sure is to print it on a different printer.  The fact that you barely notice it's probably because your pinter gets older, or need some replacement of consumables.

  As to how to solve this problem there are not that many, you can do it, you might try to print either way up, according to your location of the image, it would be not so sensitive.

• My button mute in my launch buttons fast remains red when the speakers are not dumb.

  I have a Pavilion dv7-3165dx with win 7 Home premium pre-installed, and recently, I noticed that my button mute in the quick launch buttons stopped to change to white when the speakers are reactivated. I tried to install the latest drivers for the buttons to quick launch, which did not work. Someone solved a similar problem (button remained white when cut) by installing something, it calls the Total of HP Advisor and his advice, but I can't find the program.

  IF what I post solves your problem, please, click the button 'Problem solved' on my post.
  Oh, and if I helped you, by clicking on the star of "Congratulations" on my post would not hurt my feelings ether.

  Hello

  Try download and reinstall the IDT Audio driver on the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48830.exe

  Once installation is complete, restart the computer and see if it has no effect.

  Kind regards

  DP - K

• Links in the PDF are not open in Adobe Reader

  I created a PDF file from Adobe Acrobat that has links that open external web pages that works perfectly in Adobe Acrobat, but when the PDF file is opened in Adobe Reader, nothing happens when you click on links on. The cursor changes and the URL is displayed when hovering above, but when clicked on nothing happens. Now I tried the CTRL key and change various parameters "Trust Manager" in Preferences, but nothing seems to work. Do I need to save the PDF in a different format to allow links to be opened in Adobe Reader?

  Using Adobe Reader Version: 11.0.3 and Adobe Acrobat Version 11.0.10

  Hi Fallynn,

  Try this:

  Open drive

  Go in Edition > Preferences > Security (enhanced)

  Uncheck the Enable Protected Mode option

  Click OK and restart.

  Now, check the PDF file.

  Thank you

  Abhishek

• How to remove line empty when the data are not for a text field

  I created a PDF with Acrobat Pro 11 model. This model has an address of the employer with the address line 1, address line 2, city, State, zip code, country. The requirement is to show address line 1 and line 2 address in separate lines and address line 2 cannot be present always. If address line 2 is not present then the PDF should not show a blank line. How do I get there?

  These data are populated through xml by a publisher of BI. New line characters do not work.

  Appreciate your help on this.

  Hi sprphoto123,

  If you do not enter data in the text field 2 then you can set the form field property to is not mandatory, but if you want to disable the 2nd text field, you can add a check box in front of it to turn off the field. This can be achieved using JavaScript.

  Kind regards

  Nicos

• ITEMS ARE NOT EXPORTED TO THE EP

  After being there for a year I now create slideshows again.  I just reloaded Premiere Elements 8.0 on my machine.  I created slideshows on Elements 8.0.  They will not export PE either by "Burn to disc" or "change in PE.  Suggestions as to what I do wrong or not him did not?

  I also have a very basic question for the poster.

  What method do you use to create a slideshow? There are at least four ways to do?

  If you create your slideshow in the Organizer, there is a send to the Premiere Elements option that will send the slideshow to the organizer directly to a Premiere Elements project.

• Using Framemaker, 2015, when editing, changes are NOT saved even after registration, including when you import new graphics.  Save, and then reopen the document and the old graphics are here and sometimes even old text.  Is this a known bug?

  Steps to reproduce:

  1. open a document in FrameMaker 2015

  2. change the document

  3 save the document

  4 open new document.

  5. unsaved changes.

  Embarrassing especially when doing the import images, old we remains same after the new update.

  Work in progress about-

  change the document twice and then save. The backup file would be the problem? Frame creates several tables backupfile and so the backup must be updated before the primary?

  Try the direct path - updates

• My InDesign CC 2014 are not exported in jpeg format... only in PDF. Any ideas?

  Hello.

  
  

  I've been using InDesign CC (2014) for awhile with no problems until recently when I tried to export to JPEG and I now have only the option to export to PDF. Does anyone know how to fix this?

  
  

  I tried a few things already with no success...
  

  The upgrade of my BŒUF to 10.10.3
  

  Restart my InDesign while removing my preferences/settings

  Try different documents to see if my file has been tampered

  
  

  Is it just time to upgrade my Mac. It is a mid-2011?

  
  

  I have no other problems with the suite Adobe... just that!

  
  

  Thanks in advance...
  

  
  

  
  

  I don't know if you've used the appropriate method for the restoration of your InDesign preferences. Use this method (if you haven't already done so):

  Garbage, replace, reset or restore the application's preferences

  If this does not work, try uninstalling InDesign (you can find it on the creative cloud app), or or find an uninstall program in the folder InDesign CC 2014. Then install again.

• NOR-DAQmx run options under additional installers are not displayed

  At halfway in this FAQ (http://zone.ni.com/devzone/cda/tut/p/id/3021) talks about the various Runtime options available when you include the NOR-DAQmx driver in a LabVIEW Installer - they are full and 5 different options of operation. I have 2011 LabVIEW and NOR-DAQmx 9.3.5; the only installation type I see is complete. No idea what I may have missed to install or configure correctly?

  Thank you

  Jorge

  Hi Jorge -.

  You make an excellent point raise this question.  The reality is that the documentation is a bit a type-o.  The latest version of DAQmx which allowed this ability multiple-install type was 8.7.1 that allowed full, TERM 3 and 5.  Version 8.6.1 allowed all full of Runtime and RT 2-5 selectable options.

  This was changed in the development of the installer because features such as Measurement & Automation explore (MAX) by omitting makes it much more difficult to program source files that use the DAQmx driver.  Limited choice DAQmx Installer problems in future development. SignalExpress is also omitted in some versions.   This change was made in order to avoid questions that were considered to be a problem when the installers have been created with these minimalist installs.  So I'll make this change to the Developer Zone confusion invites future readers.

  I really appreciate your message and bring it to our attention.

• Action of NESTS when VMS/CSPM is not available

  Hi all

  I would like to know what is happening when the NESTS (4235) detects an attack, and virtual machines that is supposed to receive an alert and take action (e-mail, closing the port etc.) against the attack is broken. In this case the NESTS are configurable to take another action in itself? Thank you for your response.

  Kind regards

  Murali

  A little clarification on my above post;

  The pusher mechanism is from the point of view of the IDS. Normally, it is the perscpective security monitor form. In this case, the mechanism is a method of 'pull' from version 4.0. This prevents a loss of events as when the security monitor server comes up or was 'time' to get new events, sensors, it goes into the mechanism of 'pull '.

  Thank you

  Christophe

• Saving programs are not

  I just got CC on my workstation computer, and whenever I run an open program but it closed shortly after. I'm not having this problem with Lightroom or Acrobat. I noticed, though, one thing is that Lightroom was asked to record the series/product number whereas other programs do not have. When I log on my Adobe account and look at my page of products and services, it shows that Lightroom is registered and its serial number, as well as my subscription to the CC.

  I really want to know what goes wrong, because I need to work.

  P.S. I tried to open the programs on another user account. I just uninstalled adobe, used the CC cleaning tool, then reinstalled. I've renamed the opm.db and 1.0 file in the AppData\Local\Adobe directories. I disconnected the program Creative Cloud and reconnected. Nothing has worked.

  I apologize if this has been posted in an incorrect area.

  If it's important, my computer is a 64-bit machine Windows 8.1.

  Well, I think I solved the problem because now first works perfectly. Basically what I did was go to C:\Program Files (x 86) \Common Files\Adobe and renamed the folder 'SLCache' to SLCache.old. I then right click on the first and he ran as administrator, and now it works perfectly.

• How can I create a chart that creates new series each year when the data are not collected on a daily basis?

  I collect numbers "occasionally" of my solar system and to create a standardized chart that shows that the generation on an annual basis, so I can compare fall in the fall of each year, etc..

  Because the information is not strictly 'daily' (just whenever I get to it), I don't know how it normalize for several years.

  For example, if I had

  Date - Kw/day

  15/01/10 - 14

  03/04/10 - 18

  18/04/10 - 17

  01/06/10 - 19

  21/09/10 - 15

  03/12/10 - 9

  07/02/11 - 13

  02/05/11 - 16

  17/08/11 - 18

  01/11/11 - 12

  02/11/11 - 12

  05/01/12 - 9

  04/06/12 - 12

  and so on.

  What I'd like to see is a line graph for each year from January to December with these datapoints on it. I have much more "incremental data" that I presented above, but it's on "random dates" during the last 8 years, and I'm just trying to see how each year compared to other years.

  To be at the front, I tried to understand how this in Excel as well, but he could not understand where the other.

  DRM for any tips/tricks/tips!

  Steve

  This might work for you...

  I placed your data in a table named "Data."

  Create a second (in this example, titled 'Table 1')

  

  In the table 'Table 1' months are in the first column and the first row (which is a header row) contains the years - add columns to add new year:

  B2 = if (SUMIFS (data: $B, data: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" "") > 0, SUMIFS (data: $B, given: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" ""), "")

  It's abbreviation dethrone select cell B2 and type (or copy and paste it here) the formula:

  = IF (SUMIFS (data: $B, data: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" "") > 0, SUMIFS (data: $B, given: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" ""), "")

  Select copy of cell B2

  Select the cells B2 at the end of F13, dough

  now select cells A2 through F13 and add a graphic (the XY scatter diagram)

  Add new year add one (or more) new columns for "table 1", then add the year to the top:

  

  Now alone, click the chart to activate the chart.  then click on the button 'change data references '.

  now, drag the data reference control handle to the right to add the new year to the table:

  

  You can add several years to the time, so you don't have to it very often

• HP elitebook 8470p: my button mute in my launch buttons quick rest orange when the speakers are not dumb.

  When I push the mute button, it works but rest orange alone does not change. It must be white in his.

  Hello

  The only other suggestion I have would be to try to install the Windows driver 8.1 IDT Audio for your laptop - if you want to try this, it's on the following link.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212842 & swItemId = ob_124404_1 & swEnvOid = 4158 #TAB4

  Restart after installing this driver.

  Kind regards

  DP - K