Activate the default purpose correction?

Similar Questions

• How to activate the default theme

  I get a black screen when you start Firefox. Safe mode works. I went through the uninstall process and reinstall of Firefox and fixing and reset and open in safe mode and disabling modules and uncheck acceleration of material as described in the troubleshooting tips.

  I'm at the help desk where I'm supposed to change the default theme but it is off to me. There is no checkbox to activate the default theme. How can I activate the default theme?

  If allowing the default theme is there anything else I can to get past the black screen when starting Firefox?

  Sorry, please deactivate hardware acceleration as a temporary workaround. There is an incompatibility between 33 Firefox and some former card/chipset drivers graphic. More information: https://support.mozilla.org/questions/1025438

• Activate the default privileged code. Firefox > = 22

  Time: How can I activate default privileged code (in Firefox 22 or newer)?
  Since this is only for local purposes, on several lab computers - I can change all the files of Firefox.

  If you have questions 'why?' or answers unrelated to Firefox:
  I use a preferred code of the normal site (open locally the file on the local computers only), and since Netscape.Security.PrivilegeManager.enablePrivilege("universalbrowserread") disappeared from Firefox I can not run the privileged code of normal content after 17 versions.
  I need to activate some features like access drawWindow and normal page file by default.
  Use scripts that allow the user (in the laboratory on lab computers) to enter the normal sites, collect data on user's activities, connect you to what has been clicked, but to take screenshots of the Web page after the action, to record images on hard drive.
  Users are essentially stable in view of pages Web - UX testing and Firefox much help (ed?) with this type of test.

  But I don't really have such opportunities as rewrite all plugins or take screenshots that are manually or something like Greasemonkey.
  Other options, like the camera or software to the registration screen are also not possible.

  Thanks in advance.

  That is not intended as humour, but supposed to be taken very seriously.
  
  If someone on the internet allows you to create a bearing pref name request then probably you wouldn't do this.

• vCAC 6 activate the default Notifications for users

  By default e-mail notification are disabled for the user if the user has not received any information about an application or a service rental term.

  Can it be enabled by default for every user? Don't want to give new users a documentation on how they should first set up their environment to work properly

  

  The @vCACTeam helped me with this: Please see https://twitter.com/christianklose/status/457093033281216512

• Activate the profile Correction Question

  I'm on a PC-Windows7 and Lightroom 3.4.1

  Is there a way to get to the starting or opening any catalogue, have the profile Correction allow automatically checked?

  I find it a bit cumbersom to make one then have to synchronize all until I really get to work on my files.

  Thanks for any solution.

  Brad

  Yes it is possible. However, you will need to repeat the steps for each camera model that you use.

  1. Select the file in the library module. The file must be one that Lr has a profile of lenses for and without any develop adjustments (i.e., a file not published)

  2 go to the develop module

  3. go to lens Corrections Panel

  4. check the activate profile Corrections. Make sure the installation popup shows by default.

  5. go in menu development and choose the default configuration settings

  6. when the dialog box opens, press the update to current settings button

  Above shows Lr to apply automatically the default profile for any file that has an available profile.

  

• Impossible to activate the correction lenses for images

  I try to get all the JPEGs, shot with a particular camera to have profile lens corrections applied to them. So with a jpeg that is selected in the development module I check on "Enable lens corrections" click setup and click "save new lens correction default profile." But it does not work. The next jpeg that I select is not activated lens corrections. Or it does not work if the setting to develop, I click on set default settings > update current settings. I think I have to activate the lenses to each image corrections. What I am doing wrong?

  Settings that you did for images should apply to others or the images differently than what I understand, you were doing:

  You say that you update to current settings >.

  This means that you update your lens correction parameters (that you developed earlier) with the parameters of the new image (which does not have lens applied correctioons).

  Instead, try the following - in the develop Module:

  Once you have the frame for a picture, select more images without deselecting the first image (ctrl + click on the images more).

  Your first image should have a light gray frame, other images, a slightly darker gray frame. This means that all images are selected, but your first image is active.

  At the bottom of the right pane, click . A dialog box appears that allows you to check the settings you want to apply to the other images.

  Check or anything that applies in the case of sub-options of lens correction.

  Click . Your lens correction should now be applied to other images - and also other parameters of development if you checked them.

  WW

• What is the purpose of the files the (Inbox, trash, etc.) who are also in the default account?

  What is the purpose of the files the duplicate (Inbox, trash, etc.) who are also in the default account?

  Check here

  • http://KB.mozillazine.org/Local_Folders

• Error message: this action cannot be completed because the other program is busy. Choose ' switch to ' to activate the busy program and correct the problem

  Original title: server busy

  I get a popup server busy with the message: "this action cannot be completed because the other program is busy.  ' Choose ' switch to ' to activate the busy program and correct the problem.  There are two buttons"'Switch To' and 'Retry '.  Neither fixes the problem and I do not understand what they are talking about.

  Hi adarb,

  1. when exactly you get this message?

  2. what applications do you use when you get this message?

  Method 1:

  You can restart the computer and check if it helps.

  Method 2:

  You try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

  After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to activate the e-mail of the user by default, which corresponds to your adobe id?

  How to activate the e-mail of the user by default, which corresponds to your adobe id?

  No problem, glad it works. Good luck!

• I'm not able to activate Windows Vista in my book, if I have the product key correctly insert provided the label.

  I have laptop HP bought in June 2009. Now, it shows the message that there is no authentic version, when I try to activate the product key provided on the sticker it gives message of invalid key.

  So, how can I activate my Windows Vista? Please answer me quickly. Also to mail me on * address email is removed from the privacy *.

  Hi Vishal,

  If you are unable to activate over the internet, then you will have to phone line Activation of Microsoft. Restart the process activation, but instead of using the "Internet" option, choose "phone". In most countries, it's a free (phone) number. I must point out that the system is automated, so, first, you're dealing with a machine. You nheed to be in front of your PC and your PC must be turned on. As you go through the Activation Assistant a set of numbers will be displayed on the screen of yor. In this point in the interview, automated, you will be asked to enter these numbers using your telephone keypad. If all goes well the automated service will give you another set of numbers you need to enter in the relevant spaces on the screen of your PC. Once this has been done the activation must be complete.

  'If' activation is always denied the 'not' to put the phone down, hang on to the place and you will be forwarded to a 'real' person who will be able to help you to activate your copy of Windows.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• How to set the default boot drive? I can get to about 8 choices but only one is correct and I don't know how to do that by default.

  I hit F10 and get a choice. The default value is a flash drive with no boot of the stuff.  How do I pick up and save the right choice that the computer always looking to when it is turned on.

  Hi Herbertrosenthal,

  Welcome to the Microsoft community where you can find the answers related to windows.

  If you get multiple entries start during the connection to the Windows 7 operating system then I suggest you to refer to the following methods.

  This problem can occur because interties incorrect startup, that I suggest to read the following steps and check if it helps.

  a. log in the computer using an account with administrator rights.

  b. Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  c. Select the Startup tab. in the list of boot tab, select the one you want to set a default value.

  d. click on apply, OK and then click on restart and check if it helps.

  Note: If you want to change the boot drive settings then I suggest you to read the following steps:

  a. new computers often display a startup (or boot) menu. In the start menu, choose "Configuration of the BIOS," or "BIOS settings," or something similar.

  Procedures vary depending on the manufacturer of the BIOS. Usually, you must press a key (for example, F2, F12, DELETE, ESC) or a key combination whenever you turn on your computer but before Windows starts. If the Windows logo appears, you must try again by waiting until the Windows logon prompt appears, and then stop and restart your computer again.

  b. the BIOS configuration screen appears. On the BIOS Setup screen, choose the option called "Boot order" or something similar. Startup command parameters may also be listed under "Advanced settings" or something similar.

  c. Select your drive from DVD or USB drive as first boot device. (The USB flash drive can be listed under "Removable devices" or other similar term).

  d. save the setting changes, and then exit the BIOS.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• It is possible to activate the page scrolls by default?

  It's a simple and minimum of such, is what makes it so annoying...

  Opening a document by default to 'jump' page when you scroll.  I find it extremely irritating, but no where near as irritating as duty open the view / page view menu EACH time scrolling and enable.

  Please tell me where I can change the default selection and explain why he is so well hidden...

  (Yes, I am extremely confident that a program like Acrobat is able to perform these basic stuff like storing the preferences of the user.  For all the money, year after year, it's better!  "It's bad enough I even had to ask!)

  Hey the0bot,

  I understand your frustration.

  Please open Acrobat and go to "Edition > Preferences > accessibility" and the always check 'use Style of Page layout' box and select Single Page continuous in the menu drop-down.

  Then click ok and save your settings and then check.

  Kind regards

  Ana Maria

• Satellite L650 - 1 M 0: could not activate the new wireless card

  Hello

  I replaced the wireless card in the laptop on WiFi + BT (Combo). New brand of laptop do not had favor of BT
  Bluetooth and WiFi work correctly on the system drivers that the system itself.

  The only problem with the new adapter is unable to activate or disable the network modules.
  Since my laptop does not support default BT will automatically turn off the controller module.

  WiFi must be turned off and as in the previous card - a function key. Unfortunately, wireless in the function bar option has disappeared, and the FN + F8 key combination does nothing. Responsible for the light WiFi is on all the time.

  It is possible to activate the WiFi module as before?
  Very please help!

  Laptop: TOSHIBA L650 1 M 0
  The new network adapter: BCM94313HMGB

  Sorry for my bad English.
  I used the Google Translator because I can't speak English. Only the Polish language ;)

  > Is it possible to activate the WiFi module as before?

  You have replaced the WLan module, which means that the hardware configuration has been changed. This means that the different module has affected the functionality of the software.

  The new WLan/BT BCM94313HMGB combo card seems to be designed by Broadcom.
  Of my knowledge that supports most of the laptops Toshiba Intel / modules Realtek or Atheros. This is why I think there may be a compatibility problem between the FN key software and this module.

  Maybe you can try to install the Broadcom driver once more to check if this can help, if not you will have to renounce that.

• Installation/uninstallation program has stopped working.__A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
  I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
  So I appreciate any help you can offer.

  Hi luv2shop,.

  This problem may occur because of the conflict by the present security software on the computer.

  I suggest you try the following steps:

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

  Step 3: Set the clean boot computer and try to install the program

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 
  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can check with iolo for known problems

  http://www.iolo.com/customercare/

  Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I had a lic 3. copy of windows 7, I used only 2 lic. I tried to activate the third today and failed.

  I had a lic 3. copy of windows 7, I used only 2 lic. I tried to activate the third today (06/25/13) and failed.

  Original title: activation error

  It is not uncommon for users who have a 'Family Pack' of Windows 7 to find that the 3rd install does not activate.  You should be OK, but you will have to activate by phone.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com