Satellite L650 - 1 M 0: could not activate the new wireless card

Similar Questions

• "could not activate the integration features" on virtual PC

  My host is running Windows 7. my virtual machine has XP Pro. It worked, but now when I try to run it in XP Mode I get the message "could not activate the integration features. When I click to go forward in any case, I get a black window with a slider _ and nothing doesn't work to open my virtual machine.

  Hi Randall,.

  Since the problem is related to the Windows XP Mode, I suggest you post your question in the below related forums.

  Windows Virtual PC and XP Mode Forum

• Could not activate the integration features

  I clicked on start > all programs > Windows Virtual PC > Windows XP Mode.  Instead of loading Windows XP in the VM, I get an error message that says "could not activate the integration features", which would cause this error message?

  MLMH

  I just had the same thing happen. When I chose to continue, I got was a black screen and no option to enable the integration features.

  I found the settings screen for XP Mode via the start menu, all programs, Windows virtual PC, Windows Virtual PC. Right-click on the Virtual PC icon in windows, and then select settings. Select close and then change close automatically with the following measures: to Hibernate to stop.

  When I closed the window the next time xp mode, he asked me if I really wanted to force the shutown of the window, I said yes. The next time I started windows xp mode it came and all my programs were OK...

  Hope this helps

• How to activate bluetooth Qualcomm Atheros AR3012 on laptop Asus when "Windows could not activate the device (the function of bluetooth?

  airplance mode: off

  WiFi: connected.
  Bluetooth: off
  Ultrabook ASUS, bought on 14 April 2013
  Qualcomm-Atheros Bluetooth 4.0 AR3012 + HS
  Unable to activate the device.
  Basic troubleshooting done:
  1. reboot the PC
  2. activate and deactivate the airplance mode
  3. put updated driver
  Impossible to activate bluetooth
  error message: windows could not activate the device.
  tried steps 1-3 again me. same message showed.
  no other device is connected via USB when trying to enable bluetooth.
  known issue after removing antivirus software and install another antivirus software. but now I'm running on windows Defender.

  Hello

  Thank you for the update.

  As none of the above suggestions work, I suggest you to contact the Asus support for any future reference.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

  Feel free to contact us for any other questions related to Windows.

• Cisco ACS SE "set ip" error: could not set up new NETWORK card configuration.

  Hello

  I get the error "error: could not set up new NETWORK card configuration." When I try to set the IP ACS SE.

  When I called into the device image and tried to do an initial installation, the IP to not hold after the restart and went back to the default value.

  I went by NetPro and apparently it is a common problem. One person it is solved re-imaging unit, but who has not worked for me.

  Someone there with a solid solution? I use NIC 1 FYI.

  EDD.

  Ed,

  Please make sure that if ACS is associated with active before setting Ethernet connection

  or change the IP address of your ACS system engineer.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.0/installation/guide/appliance/admap.html#wp1109621

  Kind regards

  ~ JG

• Free extractor error - could not read the news SFX

  I hope I am in the right forum!

  I am downloading Gamblock on my laptop, but when I run the file and try to check out I get the error "FreeExtractor error - an error prevents this program to continue - could not read the news SFX - it is probably corrupted.

  GamBlock are several that this isn't a problem with the link, and to be honest I have not had problem with it in the past. I am at my wits end with it but now and wonder what it is that it blocks and think it must have something to do with the system in some way.

  The laptop is brand new

  Any help would be great!

  Hello les150,

  I suggest that you run the System File Checker to see if you have corrupted system files.

  First of all, we run System File Checker to see if you have a corrupt file system.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Restart your system

  Now run the command chkdsk:
  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  If please reply back and let us know if this helped with your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• VISTA administrator accounts disabled. Could not activate the hidden admin

  HI - all my VISTA administrator accounts are disabled. I could not allow the hidden administrator because it requires an active administrator. Can you help me create an admin user?

  Thank you
  Ganesh

  HI - all my VISTA administrator accounts are disabled. I could not allow the hidden administrator because it requires an active administrator. Can you help me create an admin user?

  Thank you

  Ganesh

  Sorry, if you are not set up as an administrator user account, you cannot enable the built-in administrator.

  This forum prohitbits someone help users to bypass the password protection, regardless of the reasons.

  This is the policy of the forum:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• Could not get the internet/wireless connection after you installed new hard drive?

  I have a HP Pavilion Entertainment PC (dv6736nr), Windows Vista laptop.  The hard drive crashed and I got a new installed.   I set up my wireless connection, even that is on the other 4 computers in this building (my desktop computer running win7 netbook win7 running 2 computers of the landlord, winVista running - they have comcast modem,? a good router) when I set up the wireless connection, it connects only 'local', no internet.  I researched this some, tried all the places with a parameter that can be a problem, but nothing helped.  What the hell did I miss?  The connection is good because it works on my desk, on which I write, as I said. To my knowledge, the hard disk the the wireless are not connected; or is it? Any help, the concrete steps that I take on my laptop, the settings themselves, would be greatly appreciated.

  Hello:

  If your laptop computer is the Atheros wireless card, you probably just update the driver.

  The symptoms you listed seem to indicate that is the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99068-1&cc=us&DLC=en&LC=en&OS=4062&product=5185745&sw_lang

  Paul

• BlackBerry Bold 9900 smartphones will not recognize the new SIM card

  I recently got a Bold 9900 as a gift. In my view, that the phone has been used on the Orange network.

  I tried replacing the original Orange SIM card with my SIMcard "pay-as-you-go" three, when I turn on the phone I get the message "SIM not recognized" and a dialog box asking me to enter a code to unlock the SIM card.

  Because this means that the phone is locked on Orange network. If so, how can I get the unlock code for the new SIM card?

  Best regards

  SS

  Hello and welcome to the community!

  You have in fact potentially two issues to deal with... When BBs are made, they are "locked" to their original media and cannot be used on any other carrier up to this MEP is unlocked. Reference:

  • http://supportforums.BlackBerry.com/T5/General-BlackBerry-functions-and/unlocking-your-BlackBerry-gu...

  But the error you say does not quite what I'd expect from an MEP lock... but please check after the above and see if your BB is indeed MEP locked... If so, then Yes you need to unlock it until you can use it on any other carrier.

  Or - some SIM cards are delivered with a code of their own necessary to unlock and use. But the supplier of the SIM card which should also give unlock code you with this (if that's what applies to your situation).

  So, I suggest you check to see if your device is still locked MEP... If so, get a code (you may have to pay) and unlock it. Then try the SIM card again. If it still fails then your SIM card provider.

  In addition, please check with your mobile service provider preferred 100% certain that your BB model is 100% compatible with their network for all services.

  Good luck!

• Satellite P200 - 1 K 8 - could not get the display and audio drivers to work

  Hello.
  I'm getting desperate. I tried everything I could imagine.

  First of all - do not get the control center catalyst to work, I don't have the graphics driver installed now (I tried both - Toshiba and Mobility Modder modified driver ATi - none works.)
  Second - when I install the audio driver Realtek audio Manager is encoutering the problem and needs to close every time at startup. And Yes, I updated the BIOS to version 5.20 installed XPSP3, chipset driver installed (the most recent Intel homepage or one of Toshiba, anyone, always the same question).

  Help, please. I don't want to spend the rest of my life trying to get XP on my laptop.
  Thanks in advance.

  Can you please send the number of full model of your laptop?

• Satellite L650-11F - cannot install driver page of the ATI graphics card

  I just bought a Satellite L650-11f and tried to update the drivers for my Ati hd5650.
  The problem is the control of catalyst can I install without problem but when I try to install the site display drivers driver ati I get this error:
  ATI catalyst mobility can t be downloaded due to the incompatibility of hardware/software on your computer. The version of your driver card is not supported. for an update of the graphics driver, contact the manufacturer of your laptop.

  How should I update with the latest display drivers cause the manufacturer are 6 months old?

  Hello

  You have a few problems with the Toshiba display driver?
  Graphics drivers from Toshiba are modified for mobile use, this means that the Toshiba drivers support for GPU overheating protection.
  ATI drivers don t support this protection and this is the reason why you get this message.
  Generally, you have to take the driver of Toshiba page

  Of course, it is possible to install the ATI drivers also.
  But you would need to install the driver in Device Manager.
  To use the Advanced installation procedure that would allow to choose the driver downloaded from the ATI page you simply forcing windows to choose such driver

  But note; You can use these drivers ONLY at your own risk

• Could not open the new photos app after update

  I just updated my MacBook Pro (late 2011) from Yosemite to El Capitan, I am now unable to open the Photos app. I don't have iPhoto as he took in the update. Whenever I try to open the Pictures dialog box pops up saying "an unexpected error has occurred please exit and restart the application. I tried to not reopen several times, no change. I reinstalled the update of El Capitan - still unable to open the photos.
  I tried now Option + Cmde pressed at the launch of the app to fix the library - it gave me the option to repair once but could not find a library, now I can't get this option again.
  Does anyone else have this problem or help? Thank you.

  a. you have iPhoto in your list of apps in the Mac App Store - purchased I El Capitan and iPhoto 9.6.1

  b. you have a backup before you upgrade the operating system?

• I have 1 2010 Macbook and I could not install the new OS. I'm on 10.6.8. and get an error message saying that it will not install on this computer. Thank you

  I wonder if my Macbook must be sent to the trash since I can no longer get updates to the OS. I have 10.6.8. When I try it tells me that they will not be installed on this computer. It works fine but I do not receive security and other software updates any more. What can I do?

  The computer has a value for someone who does not have a new OS X and does not use

  the last iDevices; Thus the old app from iTunes and stuff would be a good deal, as it is.

  Without more information on the model number and build year, propose any later version

  OS X update (because there may be one or two; if nothing shows up on the Mac App Store)

  However, without more information, such as the about this Mac can show you the

  Details on my side that are not lacking.

  • How to identify MacBook - Apple Support models

  {This page to support old shows original - and also new macbook 12 in. of retina series}

  What is your MacBook (13-inch, mid 2010) computer model?

  This is the May 2010

  Abandoned by July 2011

  Model identifier MacBook7, 1

  Model number A1342

  EMC 2395

  MC516LL/A order number

  The link to the support page above also includes how to identify the details in a separate link in it

  that tells how to find the serial number and other specifications. Sites such as the

  http://EveryMac.com include most if not all Apple product specifications.

  If the computer that you have is a MacBook 13-inch Mid-2010, he could run the new OS X

  However, if the old hard drive is full, saved from the old stuff, you want to get an external

  Hard drive and create an archive of it; Perhaps a clone of the complete system. However if you

  use a time Machine, which can help in some cases. The original hard disk can be

  have worn out, so it might be a good idea to replace it with a new larger capacity

  hard drive. In addition, chips of memory could be improved to higher total capacity, too.

  Those things would give the MacBook OSX current or most recent advantage.

  If the computer is far from the trash. Those who are still worth something, too, if sold at

  an individual and not some buy-TI - cheap.com. If you choose to be rid of the macbook:

  • What to do before you sell or give away your Mac - Apple Support

  • How to prepare your Mac for sale:

  http://www.thesafemac.com/how-to-prepare-your-Mac-for-sale/

  The browser upgrade: your model may use Mozilla's Firefox, he sees updates...

  • How to download and install Firefox on Mac - Mozilla Firefox Help:

  https://support.Mozilla.org/en-us/KB/how-download-and-install-Firefox-Mac

  Anyway, the computer is new enough to be of good use.

  Most of my friends is older than that!

• Could not add the new folder to a new Library_Windows 7

  I get a dialog box that shows the following notification (see below) whenever I try to add a folder to the new library in Windows 7. I tried to get to a point where the notification is not display and add a folder to the newly created library but I am unable to.

  Dialog box:
  C:\Users\my name\Documents\ Embroidery\New Classes_Digitized adorable folder refers to a location that is unavailable. It could be on a hard drive on this computer... could have been moved to a different location.
  This new library is not related to the classes cunning. I create a library of classes adorable some time ago and added a new folder. I don't have to use the library and so I removed it. Probably not the right way to remove a library and thus the reason for the problem earlier. Any advice would be much appreciated.
  Carol

  Carol

  See if my answer in this previous thread helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/why-cant-i-create-a-new-folder-in-Windows-7/0af243fd-138a-4e71-a34b-826153b80f62