Activate the profile Correction Question

Similar Questions

• Wrong camera in the lens correction module?

  I have a stupid question (maybe).  I use a Canon 7 d, and I noticed when I 'activate the profile correction' he gets the right lens (24-105L) but in the profile box, he chooses a 1Ds Mk III & 24-105L.

  Corrections auto search ok, but is it normal?  I could have sworn I had seen the 7 d in this area before, so I wonder what's happening?  Maybe I imagined that.  Don't know.  Could I have deleted by mistake?

  Any help?

  flyingshutterbug wrote:

  Corrections auto search ok, but is it normal?

  Yes... the camera model is purely informational and does not impact the performance of the profile. What is important is the profile of the real purpose and ensuring that the goal is in place.

• Using the profile of windows7 on Ubuntu12.04

  I try to use my firefox on Windows7 in Ubuntu12.04 profile (installed with Wubi). I created a new profile and pointed at the correct profile folder, but I get the message:

  Firefox is unable to use the profile because it is in use.

  I tried to change only files containing passwords and cookies. No change. the old profile in Ubuntu works very well. Also checked the profiles.ini. Also tried it on Ubuntu in VirtualBox.

  Thank you.

  It is preferable not to use the same profile with different operating systems, because the paths of files that are used in some files are not compatible.
  
  Also, Ubuntu might not able to lock the profile correctly (Windows and Linux use a different method and files).
  
  The current versions of Firefox is no longer delete the lock file to make it possible detect start failures by looking at the timestamp.

  You can try using the links hard or soft links to specific files (sqlite databases and a few other folders).

  See these pages for a description of the files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

• Impossible to activate the correction lenses for images

  I try to get all the JPEGs, shot with a particular camera to have profile lens corrections applied to them. So with a jpeg that is selected in the development module I check on "Enable lens corrections" click setup and click "save new lens correction default profile." But it does not work. The next jpeg that I select is not activated lens corrections. Or it does not work if the setting to develop, I click on set default settings > update current settings. I think I have to activate the lenses to each image corrections. What I am doing wrong?

  Settings that you did for images should apply to others or the images differently than what I understand, you were doing:

  You say that you update to current settings >.

  This means that you update your lens correction parameters (that you developed earlier) with the parameters of the new image (which does not have lens applied correctioons).

  Instead, try the following - in the develop Module:

  Once you have the frame for a picture, select more images without deselecting the first image (ctrl + click on the images more).

  Your first image should have a light gray frame, other images, a slightly darker gray frame. This means that all images are selected, but your first image is active.

  At the bottom of the right pane, click . A dialog box appears that allows you to check the settings you want to apply to the other images.

  Check or anything that applies in the case of sub-options of lens correction.

  Click . Your lens correction should now be applied to other images - and also other parameters of development if you checked them.

  WW

• After update to 5.0.15 server, can not activate the OD service and the Profile Manager

  Hi, I have recently updated my Server 5.0.15 under El capitan 10.11.3.

  After that, Service OD and the Profile Manager can be activated server GUI.

  Of course, all users on my network are missing from the list of users; just local users remain.

  Reason: cannot be connected to the node 127.0.0.1

  How can I recreate an OD without use of app server?

  Thank you.

  P. S.

  Of course, even in the local server translates users preferences pane not connected.

  Many Open Directory problems can be solved by taking the following measures. Please test after each of them that you have not already taken it and back up the data before making any changes.

  1. the OD captain must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; for example, Ethernet and Wi - Fi.

  2. you must have a working DNS serviceand the host name of the server must match the FQDN name. To confirm, select the server by its name in the sidebar of the window of the server application, and then select the Preview tab click the button change on the host name line. The access that your sheet of server, the domain name must be selected. Change the host name, if necessary. The server must have at least three levels (for example, "server.yourdomain.com") name, and the name must not be in the top-level ".local" domain, which is reserved for Hello.

  3. the main DNS server used by the server must be itself, unless you use another internal DNS server. The only DNS server on the clients should be internal, they should get from the DHCP server, as appropriate.

  4. If you have accounts with basic network directories, make sure that the URLS are correct in the user settings. A return status of 45 from the demon authorizationhost in the newspaper may mean that the URL for the installation directory was not being updated after a change in the host name or the file sharing protocol (AFP, SMB, or vice versa.) If the server and the clients run all OS X 10.10 or later, directories should be shared using SMB instead of AFP.

  5. follow these instructions to recreate the Kerberos configuration on the server.

  6. If you use authenticated connection, check the validity of the certificate of the master. The common name must match the host name and domain name. Unselection and then reselect the certificate in.app was reported to have an effect in some cases. Otherwise, delete all certificates and create new ones.

  In the case of a self-signed certificate, create a trust profile in the Profile Manager and deploy it to the customers. On the server, you may need to create the folder

  /etc/openldap/certs

  and place a copy of the certificate of the server, for example:

  /etc/openldap/certs/server-name

  Also add a directive to the file

  /etc/openldap/ldap.conf

  of the form

  TLS_CACERT /etc/openldap/certs/server-name

  7 remove the link, then to connect customers in the preferences users and groups window. Use the FQDN of the master name.

  8 restart the master and clients.

  9. do not connect you to the server with the account of the user of a network.

  10 turn off the internal firewall in use, including third-party "security" software

  11. If you have created replica servers, remove them.

  12. If OD has recently stopped working while it was working before, you can be able to restore automatic backup in/var/db/backups, or a snapshot of the time of this backup Machine.

  13. If there is slapd errors in the log, try the following steps.

  Disable the Open Directory in the server application.

  Enter in a shell:

  cd /var/db/openldap

  sudo -s

  db_recover -c -h authdata

  db_recover -c -h openldap-data

  Turn on Open Directory.

  14 reset database password strategy:

  sudo pwpolicy -clearaccountpolicies

  15. as a last resort, export all users od. In the Open Directory of the server pane, delete the OD server. In some cases, you may need to use the shell to remove the server. Then recreate it and import the users. Make sure that the UID is in the range 1001 +.

• Error message: this action cannot be completed because the other program is busy. Choose ' switch to ' to activate the busy program and correct the problem

  Original title: server busy

  I get a popup server busy with the message: "this action cannot be completed because the other program is busy.  ' Choose ' switch to ' to activate the busy program and correct the problem.  There are two buttons"'Switch To' and 'Retry '.  Neither fixes the problem and I do not understand what they are talking about.

  Hi adarb,

  1. when exactly you get this message?

  2. what applications do you use when you get this message?

  Method 1:

  You can restart the computer and check if it helps.

  Method 2:

  You try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

  After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Question of ' system cannot activate the graphics performance "T400

  Hi all

  I have a ThinkPad T400 with Switchable Graphics, running Windows 7 x 64, with the latest drivers provided by Lenovo.  I tried to go to the ATI graphics card today for the first time in a little and got a message "system cannot activate the graphics performance", invites me to disable all external video connections or disable all graphics applications.

  The problem is, I don't have any open application.  I disabled several startup programs, uninstalled VMWare Workstation and tried several services, I thought that might interfere with the manual - still no luck switching.  I'll reinstall the driver, but in the meantime, anyone have any ideas, or find a resident program that tempt me not not to be able to switch from Intel for the ATI graphics card?

  I believe that after checking the system logs, the error was somewhere in libraries Visual C++ Runtime. I decided at this point, that the question was too difficult to follow and with Service Pack 1 available, I saved and reloaded. Problem solved.

• Goal not recognized by Lightroom despite the profile of lenses available and correct metadata in the RAW file

  Hi all

  In Photoshop Lightroom CC (latest updates installed - v2015.5) my Tamron 15-30 mm f/2.8 lens is not recognized, only an opportunity for the focal length and aperture are visible.

  The profile of lenses must be selected manually - but even after selecting the lens information are not available for the photos in the library module, so I can't search/filter for this purpose.

  In the RAW files from my Nikon D750 written in the metadata correctly: target = 15-30 mm f/2.8 and LensIDNumber = 233.

  Funny enough for the 24-70mm f/2.8 Tamron everything works-> his profile is automatically recognized in the develop module and I can / filter to search for it in the library module.

  Any advise?

  Thank you and best regards,

  Meik

  You are probably affected by this known bug: -lens-metadata-field-missing-on-import https://feedback.photoshop.com/photoshop_family/topics/camera-raw-9-5-lens-information-aux

• How to activate the camera CANON G7x profile in LR 5.7.1

  Hey dear community,

  I'm trying to get the camera to my CANON Powershot G7x active profile, but it does not appear when I import my pictures from the CANON. All other profiles as G1x, G10, G11, G15 of Canon.

  What should I do?

  I use LR 5.7.1 on a MACBookPro Mid 2010 with OS X10.11.4 with 8GByte of RAM

  Thanks for feedback and Franconian spring greetings

  Raws G7X have been supported since LR 5.7.

  Camera profiles should include Adobe Standard and camera faithful/landscape/Monochrome/neutral/Portrait/Standard

  Lenses for the G7 X profile is built in and still more if that's what you're talking about.  6 LR and LR CC and CC of Photoshop with ACR, 8.2 or more recent, both have a way of seeing that an integrated lens profile is used.  Here's how things look at PS CC ACR 9.5, where, as you can see not one, the embedded profile corrects lens distortion and Chromatic Aberration:

  

  If you speak a G7X Mark II, so it's a very recent device, and Adobe is not compatible until after it's all first available for sale in the United States at the end of May.

• Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing

  Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing? Mac OS X 10.10.5.  I reinstalled the OS and Lightroom and PS, nothing helps.

  Hi ParadigmRose,

  This is expected as profile tab behavior does not appear under Lens Correction Panel if you go to Camera Raw Filter in Photoshop

  However, profile tab would be there if you open a raw image directly in camera raw first.

  You can go to the filter menu > Lens correction in Photoshop, if you want to search for profiles with edit in Photoshop.

  Kind regards

  Claes

• the olympus lens have profile correction

  Pluggable UN MDGS - EM1 olympus with different lenses (f/2.8 14-40mm, 45 mm f1.8, 40-150 mm f/2.8). Not recognize of camera raw is the. Are you having the same problem?

  I note that plug-in photoshopCC

  Thank you for your help

  Philippe

  It could be that the lens profile is built-in for that lens in the camera raw file.

  Look down the lens Corrections tab.

  

• "Enable the correction of the profile" box causes the photo to zoom in or out

  When I check the box "Enable the correction of the profile" under "Lens Corrections" (Module Development), I get a very tight zoom-in or a dramatic zoom out. I was not able to find a framework that I may have inadvertently changed. Any suggestions why this could happen? Thank you!

  There is a provided by Adobe lens profile Downloader that allows you to search for lens profiles created by other users. You might find a profile for your goal.

  Adobe - search: lens % 20profile % 20downloader

  I have not used this program for a while. I use the old cameras and not buying new lenses normally. I think that the Downloader is still not available and usable. But as I said, it's been long enough that I used it.

• multiple choice with partial credit question, I have 10 responses only 6 are correct.  How to assign 10 points for each of the six correct answers for a total of 60 points setting?

  How can I assign partial credit so that for each possible answer 6 out of 10 each correct answer gets 10 points each, with a possible total score of 60 points quiz?

  To Captivate 7, please go to the Quizzing workspace. You will have the properties and properties Quiz Panel visible. I will now repeat the workflow, I explained briefly for CP7:

  • Check the partial score in the Quiz properties and also multiple responses.
  • Indicate the correct answers on the stage
  • Select the first correct answer on the stage text caption and indicate its score (10pts) in the properties panel, not in the Quiz properties!
  • Repeat the same for each correct answer
  • Check the total score in the properties of the Quiz Panel: should now be 60pts to the full question.

  None of the quiz system variables can be changed, they are read-only. System variables in Captivate 6 - Captivate blog explains the system variables for 6 categories, there are a few changes in 7: new features of Captivate 7.01 - Captivate blog but the Quiz category is always read-only.

• Can LR5 automatically apply the lens correction profiles to import?

  Rather manually using correction lenses profiles to images each time to correct an image and then synchronize with the rest, I would like LR 5 to automatically apply the correction of the objective appropriate (whether by EXIF info or "default" profile) when importer by the camera (map).  Does anyone know a way to do this?

  Herb

  Hello

  Simply create the adjustments you want to apply to the set of pictures / images, i.e. the lens corrections and save them as a preset in the develop module and then apply the preset upon import. The import module allows you to select a developing 'settings' preset using the Panel applies when importing.

• Activate the default purpose correction?

  Is there a way to activate the default purpose correction? I do not have to check the box for each picture I import.

  Best solution I know is to use a preset.

  To do this, choose an image and apply the lens corrections to the image.  Save a preset (I called mine 'Lens Correction On' - how the original).  Use this when you import new photos.