Activate the flashback to eve of database

Similar Questions

• How to activate the log mode archive in oracle database 11 g 2

  Hi all

  I hope that you all are doing well.

  I want to activate the archiving log in my version of the database 11.2.0.4.0 safely.

  Why safely because my database works fine now.

  Windows 8.1 - OS 64 bit.

  Please provide the correct steps

  so that the work of database and schema can not lose more after that the archive log is enabled.

  Thank you all for your response.

  I followed the thread How to archivelog mode

  Measures

  -----

  SQL > archive log list

  SQL > show parameter db_recovery_file

  SQL > alter system set db_recovery_file_dest_size = 10G scope = the two sid ='* ';

  SQL > shutdown immediate

  SQL > bootable media.

  SQL > alter archivelog database;

  SQL > alter database open;

  She is successful.

• How to activate the database from Enterprise Manager Grid 12 c EBS 12.2.5

  Hello

  I have a question how do I activate the enterprise Grid Control on the 12 c database manager.

  Now, I was demanding to activate the database of EM 12 c on EBS 12.2.5 grid control. Already tried to emca, but showed nothing to configure?

  Please help me how to activate this feature?

  Thank you

  Andreas Kuncoro

  Hi Christophe,

  Thanks for your info. I already activate.

  Thank you.

  for retail, the step:

  Enable Enterprise Manager on Oracle E-Business Suite with database 12.1.0.2

  Concern about the listener and the database only.

  1. check the listener

  $ cd $ORACLE_HOME/network/admin/VIS2_miiexa01 /.

  $ more tnsnames.ora

  ###############################################################

  #

  # Do not change the settings in this file manually. They are managed

  # automatically and will be overwritten when executing automatic configuration.

  # For more information about automatic configuration, see the Oracle

  # E Business Suite Installation Guide.

  #

  $Header #: NetServiceHandler.java 120.28.12020000.6 2014-05-14 07:55:23 mmanku ship $

  #

  ###############################################################

  VIS2 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

  (CONNECT_DATA =

  (SERVICE_NAME = VIS2)

  (INSTANCE_NAME = VIS2)

  )

  )

  VIS2_FO =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

  (CONNECT_DATA =

  (SERVICE_NAME = VIS2)

  (INSTANCE_NAME = VIS2)

  )

  )

  VIS2_LOCAL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

  )

  VIS2_BALANCE =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (LOAD_BALANCE = YES)

  (FAILOVER = YES)

  (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = VIS2)

  )

  )

  VIS2_REMOTE =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1529))(HOST=miiexa01.vision.co.id))

  )

  )

  VIS2XDB =

  (DESCRIPTION =

  (ADDRESS =

  (PROTOCOL = tcp)

  (HOST = miiexa01.vision.co.id)

  (PORT = 1529)

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl12XDB)

  )

  )

  extproc_connection_data =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROCVIS2))

  )

  (CONNECT_DATA =

  (SID = PLSExtProc)

  (PRESENTATION = RO)

  ) )

  IFile=/Home/VIS2/12.1.0/Network/admin/VIS2_miiexa01/VIS2_miiexa01_ifile.ora

  2. check the database

  $ sqlplus / as sysdba

  check port https already set to EM

  SQL > SELECT 'https://'|| SYS_CONTEXT ('USERENV', 'SERVER_HOST') |'. ' || SYS_CONTEXT ('USERENV', 'DB_DOMAIN') |': ' | dbms_xdb_config.gethttpsport () | "/em/' double.

  SQL > SELECT 'https://'|| SYS_CONTEXT ('USERENV', 'SERVER_HOST') |': ' | dbms_xdb_config.gethttpsport () | "/em/' double.

  using the https protocol to open a session on EM

  SQL > exec dbms_xdb_config.sethttpsport (5500);

  Changeinit .ora

  $ viinit .ora

  Add the new line oninit .ora

  Dispatchers = "(Protocol=TCP) (SERVICE =XDB)" "

  Restart the database for changes in the init.ora file take effect.

  SQL > show the extreme setting

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  chain of dispatchers (PROTOCOL = TCP)(SERVICE=VIS2XDB)

  whole MAX_DISPATCHERS

  SQL > exit

  Thank you

  Andreas Kuncoro

• ORA-38760: this database instance could not turn on the flashback database

  Hi guys

  Without knowing it, I deleted all the files in the directory "fra" where "flashback" folder was there because of space issues. Now am facing the error.

  It's my practical database.

  SQL > startup

  ORACLE instance started.

  Total System Global Area 608174080 bytes

  Bytes of size 1268920 fixed

  184550216 variable size bytes

  419430400 of database buffers bytes

  Redo buffers 2924544 bytes

  Mounted database.

  ORA-38760: this database instance could not turn on the flashback database

  SQL > alter flashback database;

  Database altered.

  SQL > SHUTDOWN IMMEDIATE;

  SQL > STARTUP MOUNT

  SQL > select flashback_on from database v$.

  FLASHBACK_ON

  ------------------

  RESTORE POINT ONLY

  Am not able to extinguish the flame.

  SQL > select * from v$ restore_point;

  Select * from v$ restore_point

  *

  ERROR on line 1:

  ORA-38701: Flashback database log 1 seq 1 wire 1:

  "/ u01/fra/PROD/flashback/o1_mf_c1l5n3lq_.flb".

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  SQL > select flashback_on from database v$.

  FLASHBACK_ON

  ------------------

  RESTORE POINT ONLY

  I also tried to create a restore point and the flashback there.

  SQL > create restore point guaranteed rspt1 flashback database;

  Restore point created.

  SQL > select * from v$ restore_point;

  Select * from v$ restore_point

  *

  ERROR on line 1:

  ORA-00600: internal error code, arguments: [krfg_get_keepseq_2], [1], [0], [0,]

  [0], [0], [0], [0]

  SQL > flashback data base to restore the point rspt1;

  flashback database to restore the rspt1 point

  *

  ERROR on line 1:

  ORA-38729: not enough flashback database data log do FLASHBACK.

  Please help me in this regard.

  Alert log file:

  ...

  ...

  ...

  Mount of redo thread 1, with mount id 305866694

  Sun 25 Oct 10:13:30 2015

  Bytes allocated of 3981204 in the shared pool for the generation of flashback buffer

  From RVWR background process

  RVWR started with pid = 16, OS id = 15486

  Sun 25 Oct 10:13:30 2015

  Errors in the /u01/oracle/product/10.2.0/db_1/admin/prod/bdump/prod_rvwr_15486.trc file:

  ORA-38701: seq 11 Flashback database log 11 1 thread: ' / u01/fra/PROD/flashback/o1_mf_c2oqypb0_.flb '.

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  Sun 25 Oct 10:13:30 2015

  Database mounted in exclusive Mode

  Completed: ALTER DATABASE MOUNT

  Sun 25 Oct 10:13:30 2015

  ALTER DATABASE OPEN

  ORA-38760 marked during: ALTER DATABASE OPEN...

  Trace file:

  ...

  ...

  ...

  :() 2015-10-25 10:13:30.087 SERVICE NAME

  SESSION ID: (156.1) 2015-10-25 10:13:30.087

  ORA-38701: seq 11 Flashback database log 11 1 thread: ' / u01/fra/PROD/flashback/o1_mf_c2oqypb0_.flb '.

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  1. Thank you.

  you experience serious problem... because usually it works very well.

  Try the following:

  SQL > shutdown immediate;

  SQL > bootable media.

  SQL > alter flashback database;

  SQL > alter database backup controlfile to trace noresetlogs;

  SQL > shutdown immediate;

  go to the trace file generated from running (alter database backup controlfile to trace noresetlogs ;)

  location of the trace file is located in the query:

  SQL > select * from v$ diag_info;

  It will contain the script with the SQL commands, you can rename the file with the extension ".sql".

  SQL > startup nomount

  SQL > @trace_file. SQL

  SQL > restore database;

  SQL > alter database open;

  So basically you are going to recreate the files of control again...

• Files without a NAME during the Flashback Database

  Hi all

  Why, in flashback, database, retrieve a tablespace has dropped the datafile (s) consisting of within table get renamed to UNNAMEDnnn? I was going through some examples on the internet but did not find any concrete reason as to why this happens during the flashback recovery. If the tablespace can be recreated during the process, why not data files that compose?

  Could someone help me please in my understanding.

  Thank you.

  Prithwish Adhikari wrote:

  Hello

  I was talking about the flashback database to retrieve a tablespace has fallen. Please find below the link

  http://www.DBA-Oracle.com/t_rman_159_restore_dropped_tablespace.htm

  My question is

  "

  flashback

  database to the SNA 460217.

  database of flashback to the SNA 460217

  *

  ERROR on line 1:

  ORA-38795: WARNING: flashback has managed but open resetlogs would get error

  below

  ORA-01245: offline file 5 will be lost if resetlogs is done

  ORA-01111: name for the data file 5 is unknown - rename it to the correct file

  ORA-01110: data file 5: ' / u01/oracle/product/10.2.0/db_1/dbs/UNNAMED00005'

  "

  Why, in flashback, database, the data file associated with the storage space gets renamed to unnamed?

  Thanks for the link and new info.

  The reason is the same as in these quotes from doc that I have provided. As ORA-01111 indicates the name of the actual file is unknown so Oracle creates a unique name, then stops recovery so that you can provide the name and location.

  Why, during the flashback database, retrieve a tablespace has fallen...

  This formulation and the wording of the article, is probably what is mislead you. You cannot recover a tablespace using FLASHBACK DATABASE:

  Here is the doc for FLASHBACK DATABASE

  http://docs.Oracle.com/CD/B28359_01/backup.111/b28273/rcmsynta023.htm

  Notes A Flashback Database use operation applies to the entire base. You cannot flash back, individual storage spaces. A Flashback Database operation is similar to a point-in-time data recovery (DBPITR) with RECOVER , but RMAN uses flashback logs to undo changes to a point before the time runs out or SNA

  See that second sentence? You NEED to recover the entire database and, as this quote from doc says, made it like CAMILLE by RECOVER.

  In this example, the storage space AND data files were dropped. So please check the doc to DROP TABLESPACE

  https://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_9004.htm

  Oracle database deletes all metadata about the space of storage data files and all the data dictionary tempfiles in the tablespace. The database also automatically removes the operating system all data files managed by Oracle and tempfiles in the tablespace. Other data files and tempfiles are not removed from the operating system unless you specify INCLUDING CONTENTS AND DATAFILES .

  See? No additional data in the dictionary for the tablespace or data files. Real datafiles is more if they were managed by Oracle. But there MAY be data files of the operating system if you do NOT use this last clause.

  If Oracle recreates the files using unique names and then allows you to CONFIRM that the name and location should really be.

  You have a problem with that? Or just try to understand?

• Unable to do the flashback database!

  Hi all

  I activated the flashback database and created a restore point with database of flashback guaranteed so that I can do a flashback database. When I do a flashback database, its says he needs the archivelogs to perform a recovery. Flashback log usually can all have a change given in flashback logs to use for flashbacking a database. Why apply archivelogs when all the changed data does not appear in flashback log itself? please tell me.

  Kind regards

  Pradeep. V

  Hello

  Database of flashback need newspapers archives files.

  "Flashback Database is similar to traditional point-in-time recovery in its effects. To restore a database to the State at a time in the recent past. Flashback Database is much faster than the point-in-time recovery, because it doesn't require you to restore the backup data files and requires fewer changes of the archived redo logs. »

  "No file in the fast recovery area is eligible for deletion if this is required to meet a guaranteed restore point. However, archived redo logs required to meet a guaranteed restore point can be deleted after that only they are saved on disk or on tape. When you use the RMAN FLASHBACK DATABASE command, if the archived redo must convince guaranteed a restore point are not available in the area of fast recovery, then they are restored from backups of logs. »

  REF. Doc:using Flashback Database, and Restore Points

  HTH

• turn on the flashback database

  Hello
  in 10g R2, I have the following message in alertlog:

  Tue Nov 10 14:22:03 2009
  Errors in file t:\oradba\admin\MYDB\bdump\MYDB_rvwr_792.trc:
  ORA-38701: Flashback database log 425 seq 750222 thread 1: "U:\ORADATA\MYDB\FLASH_RECOVERY_AREA\MYDB\FLASHBACK\O1_MF_4TZT90WV_.FLB"
  ORA-27041: unable to open file
  OSD-04002: ouverture impossible du fichier
  O/S-Error: (OS 2) The system cannot find the file specified.
  
  Tue Nov 10 14:22:03 2009
  *************************************
  RVWR encountered an error when writing flashback database logs.
  See error stack in alert log.  To avoid crashing the instance,
  this instance has turned off flashback database.

  1. is it really dangerous to life of database?
  
  2. How about flashback database?
  
  Thank you.

  Flashback is very useful to recover from corruption of data, errors, etc. without having to restore and recover. It is also useful for dataguard failover. Now it has been disabled, then you have lost this feature, but I'd be more worried about the data base why did not write on the disc.

  Check if this file already exists:-U:\ORADATA\MYDB\FLASH_RECOVERY_AREA\MYDB\FLASHBACK\O1_MF_4TZT90WV_. FLB

  Look for space problems, disc problems.

  To turn it on: -.

  startup mount exclusive
  change the flashback of the database
  stop immediately;
  start-up;

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• Effects of the opening of a primary database in resetlogs on the standby database

  Hi all

  Operating system: Solaris

  DB: 11 gR 2

  Can anyone throw some light below the explanation is given in case of recovery through the OPEN RESETLOGS Statement oracle documentation

  If the database pending...	Then...	Perform these steps...
  Not asked to redo data beyond the new resetlogs SCN (after the start of the new branch of data recovery)	Redo apply automatically takes the new branch of the roll forward.	No manual intervention is required. The MRP automatically resynchronizes the database pending with the new branch of data recovery.

  Here is the link of the source:

  Manage a database of physical standby

  Kind regards

  Just to give a concrete example, I did a test on one of my VM boxes. The database currently shows:

  SQL > select sequence #, the journal of v status $;

  SEQUENCE # STATUS

  ---------- ----------------

  34 ACTIVE

  CURRENT 35

  ACTIVE 33

  While on the eve, I stopped the redo apply so the standby status is:

  SQL > select sequence #, used from v$ archived_log;

  SEQUENCE # APPLIED

  ---------- ---------

  YES 30

  31 YES

  32 YES

  33 NO.

  34 NO.

  The database ensures in a few newspapers behind the primary.

  On the primary, I moved the journal a few sequences, close, the bootable media and restored and recovered 37 sequence:

  RMAN > run

  2 > {}

  3 > restore database;

  4 > up 37 sequence;

  5 > restore database;

  6 > alter database open resetlogs;

  {7 >}

  During the open resetlogs operation, I have to tail the log of alerts on the standby database and the following output shown:

  RFS [11]: identified the type of database such as 'physical' standby: customer is ARCH pid 17192

  RFS [11]: new branch archives REDO: 844006029 current: 843649185

  RFS [11]: Journal selected 102 for thread 1 1 dbid-204899919 branch of the 844006029 sequence

  RFS [11]: new Branch (resetlogs_id) of archive REDO: before 844006029: 843649185

  RFS [11]: ID of Activation of archives: current 0xf3d44942: 0xf3cf5ac3

  RFS [11]: effect of primary database OPEN RESETLOGS

  RFS [11]: entry of Incarnation added to Branch (resetlogs_id): 844006029 (ORCL11PS)

  Fri Apr 04 14:07:39 2014

  Definition of embodiment of recovery target 2

  Fri Apr 04 14:07:39 2014

  Archived journal 21 additional for each sequence 1 1 0xf3d44942 dest ID thread entry 1:

  So as you can see, the log shows the standby detects the resetlogs on the primary operation and the new branch of the roll forward and received the next archivelog with sequence 1.

  Audit on the eve, it shows the status following the archivelogs:

  SEQUENCE # APPLIED

  ---------- ---------

  31 YES

  32 YES

  33 NO.

  34 NO.

  35 NO.

  36 NO.

  37 NO.

  38 NO.

  1 NO.

  2 NO.

  And after restart the managed recovery process, it now shows:

  SEQUENCE # APPLIED

  ---------- ---------

  31 YES

  YES 30

  YES 19

  YES 33

  34 YES

  35 YES

  YES 36

  37 NO.

  38 NO.

  1 YES

  2 YES

  Archivelogs with sequence 37 and 38 were not implemented because of the CAMILLE on the main sequence until (but not including!) 37 and then properly applied the next archivelogs of the new branch of the roll forward, with sequence 1 and 2.

• Impossible to activate the capture on the changeset

  I implemented the CDC

  CHANGE DATABASE FORCE logging;

  CHANGE DATABASE ADD SUPPLEMENTAL LOG DATA;

  CREATE USER CDC_Publisher IDENTIFIED OF CDC_Publisher , by DEFAULT TABLESPACE CDC_Objects

  GRANT S/n to CDC_Publisher

  BEGIN
  DBMS_CDC_PUBLISH. CREATE_CHANGE_SET()change_set_name = > 'DIMENSIONS' description = > 'Change set for Dimensions' change_source_name = > 'HOTLOG_SOURCE' stop_on_ddl = > ' y);

  END;

  CHANGE TABLE SCOTT. EMP_CDCSource ADD SUPPLEMENTAL LOG DATA (ALL) COLUMNS;

  -Instantiate

  BEGIN

  DBMS_CAPTURE_ADM. PREPARE_TABLE_INSTANTIATION (TABLE_NAME = > ' SCOTT.) EMP_CDCSource');

  END;

  -Create the changing table

  BEGIN

  DBMS_CDC_PUBLISH. CREATE_CHANGE_TABLE (owner = > 'CDC_PUBLISHER', change_table_name = > 'EMP_CDCSource_CT', change_set_name = > 'DIMENSIONS', source_schema = > source_table 'SCOTT' = > 'EMP_CDCSource',)

  column_type_list = > ' EMPNO NUMBER (4), ENAME VARCHAR2 (10), JOB VARCHAR2 (9), MGR NUMBER (4), HIREDATE DATE, SAL NUMBER (7.2), the NUMBER of COMM (7.2), DEPTNO NUMBER (2)', capture_values = > "TWO", rs_id = > 'y', row_id = > 'n', user_id = > 'y', timestamp = > 'n',.

  object_id = > 'n', source_colmap = > ' n, target_colmap = > 'y', options_string = > ");

  END;

  -Enable Capture

  BEGIN

  DBMS_CDC_PUBLISH. ALTER_CHANGE_SET (change_set_name = > 'DIMENSIONS', enable_capture = > 'y');

  END;

  -At this point, he throws error: change set Dimensions with disabilities due to the error of seizure.

  When I checked the error to CHOOSE * FROM DBA_APPLY_ERROR error is ORA-26702: close the FLOW/CDC engine applies down. 

  No idea how to solve this problem?

  Hey,.

  I solved the problem.  CDC works now.  First cause is that the engine to apply it is not enabled.

  Ask the next view to check the status of the engine to apply:

  SELECT apply_name, dba_apply status

  -If the status is disabled, run the following query to activate the application

  BEGIN

  DBMS_APPLY_ADM. START_APPLY (apply_name => ' CDC$ A_DIMENSIONS');

  END;

  -Now to retrieve the set of changes to the recovery

  BEGIN

  DBMS_CDC_PUBLISH. ALTER_CHANGE_SET (change_set_name-online 'DIMENSIONS', recover_after_error => 'y', remove_ddl => 'y');

  END;

  -Active changeset

  BEGIN

  DBMS_CDC_PUBLISH. ALTER_CHANGE_SET (change_set_name-online 'DIMENSIONS', enable_capture => 'Y');

  END;

  This should start to capture changes

  Thank you

• How does the flashback in interactive query?

  Hi all
  
  How does the flashback in interactive report?
  I have to activate archiving logs?
  
  Thank you

  You do a flashback from query how long in minutes? and, when you created your table? I ask this question because if you make a return back to a point in time before creating the table, you will get the error ORA-01466.

  Some more resources that can help to identify the source of the problem: 1 (Flash back to a point where the table was not yet created?), 2 (table 'too new'?), 3 (constraints or any other DDL before flame back?).

• Activate the automatic configuration.

  After migration DB to 11g release how to re-enable AutoConfig.
  
  Please suggest some docs to activate the automatic configuration.
  
  Kind regards.
  
  Published by: 836778 on April 26, 2011 21:10

  For 11i, please see (by using AutoConfig to manage the Configurations of the system with the Oracle Applications 11i [165195.1 ID]).

  For R12, please see (using AutoConfig to manage system Configurations in Oracle E-Business Suite Release 12 [387859.1 ID])-"" 3.2. Section activation on a new Oracle Home AutoConfig".

  You can also check:

  How to recreate the directory/scripts / / appsutil [377495.1 ID]
  How to find the .env file after the upgrade to EBS 11.5.10.2 with 9i and 10g database? [1295567.1 ID]

  Thank you
  Hussein

• Select the Flashback

  Hello
  
  
  first of all

  Happy new year to one and all 

  I use 10.2.0.1.0 oracle. I dropped a table by mistake and need to return to the table. How can I activate the Flash back to my a/c.

  804282 wrote:

  I use 10.2.0.1.0 oracle. I dropped a table by mistake and need to return to the table.

  Question:

  FLASHBACK TABLE table_name to before drop;

  to recover deleted table.

  SY.

• How to activate the trial version of lightroom 3

  Hello

  I'm new here and need help.

  I downloaded the trial version of lightroom 3 in my windows home computer and like it a lot. I then buy a copy of the box that will happen only after two weeks. However, I don't plan to install it on my computer at home, but my new imac computer at my desk where I do all my photo editing.

  My problem is that I can't wait two weeks to get the product. Can I download another version to test for my new imac in my office and when the box product comes from what I can simply use the serial number and activate the trial version or do I need to uninstall the trial version and reinstall again. According to my seller, she said I can't do that because I need to reinstall the box again product that seems weird to me.

  My other question is the earlier trial version I have installed in my home computer, I do not plan to use it more, so can I just ignore it?

  Thanks in advance.

  Lim

  Importing photos updates information for each of them in the LR catalog, which is just a database that LR can read and write.  Reopening of the catalog with a new installation of LR looks like LR where each of these pictures is, and what adjustments you made.  You must re-import as long that you reopen the file catalog even with the new facility.  You can try this on Windows: uninstall-reinstall-reopen and see how it works at ease with her.   Simply re-import if you lose your catalog and have to start again.  If you write metadata in files, automatically via a preference, either manually via the menu point mode metadata and grid, then you can even have your intact adjustments if you need to import, but you will lose your history and other things that are only in the catalogue and not in sidecar XMP files.  These sidecar files is probably the only way to transfer the changes to the PC version for Mac from LR version which probably had not considered.  At least I don't think that you can copy the catalog LR from a PC file and open it on a Mac.

  If the LR trial expires before you have a serial number then you can't use it, but once you do not enter the serial number, you can pick up where you left off.

  Lightroom is not activated as Photoshop where there is a file Adobe-server from each computer and the serial number.  LR is just a non-proces, a trial has expired or recorded.  LR is intelligent enough to understand if you have installed it on the computer before, so you can't expand a trial in uninstalling and reinstalling without reformatting your hard drive and reinstall the operating system, or at least, I think that's enough.

• sql statement that activates the trigger to capture

  Hello
  
  I'm trying to enter the sql code that activates the trigger with this procedure:
  
  CREATE OR REPLACE TRIGGER t_trg
  after insert or update
  on the manikin
  for each line
  declare
  long p_stmt;
  sql_lines directory.
  MSG VARCHAR2 (32000);
  Return VARCHAR2 (2): = Chr (13).
  triggering_sql dbms_standard.ora_name_list_t;
  
  Start
  -get the SQL trigger
  sql_lines: = sql_txt (triggering_sql);
  FOR loop_counter IN triggering_sql. FIRST... triggering_sql. LAST
  LOOP
  -Add the SQL trigger to the message
  MSG: = msg | triggering_sql (loop_counter) | line feed;
  END LOOP;
  
  Insert into values dummy2 (msg) (cad);
  end t_trg;
  
  but...
  
  ORA-06531: Referencia a una recopilacion no inicializada
  ORA-06512: en "TRASPASO. T_TRG ', line 11.
  ORA-04088: error during the run "TRASPASO del disparador. T_TRG'
  
  Kind regards
  Daniel
  
  PD. Sorry for my bad English
  
  Published by: user10660485 on 30 / abr / 2010 0:35

  What is your version of the database? There is a bug with this statement. However, you can try the following

  CREATE OR REPLACE TRIGGER EMP_TRG1
  BEFORE UPDATE ON EMPLOYEES
  declare
  v_num NUMBER;
  sql_stmt varchar2(2000);
  sql_text ora_name_list_t;
  BEGIN
  v_num:=ora_sql_txt(sql_text);
  FOR i in 1..NVL(v_num,0) LOOP
  sql_stmt:=sql_stmt||sql_text(i);
  END LOOP;
  INSERT INTO EMP_LOG VALUES(sql_stmt);
  --dbms_output.put_line(sql_stmt);
  END;
  

  In my database to Oracle Database 10g Express Edition Release 10.2.0.1.0 that it always returns the value null;
  For more information, please visit http://www.orafaq.com/forum/t/68667/2/