How to activate the log mode archive in oracle database 11 g 2

Similar Questions

• How know what the largest table of my oracle database?

  How know what the largest table of my oracle database?

  SELECT * FROM
  (
  SELECT
  NOM_SEGMENT,
  SEGMENT_TYPE,
  BYTES/1024/1024 MB
  TABLESPACE_NAME
  Of
  DBA_SEGMENTS
  WHERE
  SEGMENT_TYPE = 'TABLE '.
  ORDER BY DESC 3
  )
  WHERE
  ROWNUM<=>

• Satellite P100: How to activate the AHCI mode?

  As all you know, some laptops P100 series are equipped with a controller Intel 82801GBM SATA natively supports the AHCI and with a Fujitsu HDD which takes in charge the NCQ.

  However, the disc is forced in compatibility mode, and therefore the NCQ is disabled, resulting in a loss of performance (which is certainly necessary that laptop hard drives are generally slower than those of office).

  Unfortunately, there is no option in the BIOS which activates the AHCI mode and no tool like HWUtility that can twist that (although it wouldn't work). As far as I know, newer laptops support AHCI mode and there is also an option in the BIOS to enable it.

  Is it possible to activate the AHCI mode in our laptops beloved and make the most of our hard drives?

  Hello

  Do you think that the AHCI is disabled?
  You can run the Intel Chipset ID utility to determine if the ICH7DH SATA controller is already running in AHCI or not.

  However, I studied a little more on other forums that are a little more specific and find this:
  Activate the AHCI on Intel chipsets, without having to reinstall Windows 2000/XP
  http://www.Neowin.NET/forum/index.php?showtopic=457699
  and
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-62909

  But you know, everything you make are at your own risk!

• How do I change the log mode archive in 12 c

  Hello

  [oracle@localhost Desktop] $ rman

  Recovery Manager: release 12.1.0.2.0 - Production on Mon May 4 00:38:33 2015

  Copyright (c) 1982, 2014, Oracle and/or its affiliates.  All rights reserved.

  RMAN > Connect target sys/oracle@cdb1

  connected to target database: CDB1 (DBID = 828012650)

  RMAN > backup database;

  From backup may 4, 15

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 284 type device = DISK

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the backup command at 04/05/2015 00:38:51

  RMAN-06149: cannot BACKUP of DATABASE in NOARCHIVELOG mode

  RMAN > exit

  Complete recovery manager.

  [oracle@localhost Desktop] $ sqlplus

  SQL * more: Production release 12.1.0.2.0 on Mon May 4 00:38:57 2015

  Copyright (c) 1982, 2014, Oracle.  All rights reserved.

  Enter the user name: sys as sysdba

  Enter the password:

  Connected to:

  Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production

  With the options of partitioning, OLAP, advanced analytics and Real Application Testing

  SQL > shutdown immediate;

  Connectable to closed database.

  SQL > startup nomount;

  SQL > startup;

  Connectable to open database.

  SQL >

  Please tell me how to change the mode of journal archive in db oracle 12.1.0.2.0

  Please tell me how to change the mode of journal archive in db oracle 12.1.0.2.0

  Please mark the thread ANSWERED and repost it in the forum shared.

  Multitenant

  Before you repost again the "Archiving for control" secion of the Oracle documentation

  http://docs.Oracle.com/database/121/Admin/archredo.htm#i1006208

  Archiving control

  This section describes how to set the mode of the database archiving and control the archiving process. The authors discuss the following topics:

  • Definition of the initial database archiving Mode
  • Modification of the database archiving mode
  • Perform a manual archive
  • Adjust the number of archiver processes

  This article shows you step by step how to change the mode of journal archive.

• How to remove the log file archive

  HII,
  
  Currently, I am working on oracle 10 g 2 on windows server 2003.
  hard drive is almost full.
  
  
  
  When I run this command
  "REMOVE ALL EXPIRED ARCHIVE LOG THE ';
  
  It gives the message
  
  "indicates does not match any newspaper archive in the recovery catalog.
  
  
  
  How can I delete files from archive log?
  
  Concerning
  Vaibhav Dixit

  Yes you can.

  See you soon
  LIX.

• How to activate the log captures host esxi 4?

  Hi all... I'm trying to gather some disconnects an ESXi host for troubleshooting 4U1. I need to collect the /var/log/vmkiscid.log of the host files. Can I do this with vMA? I saw a walk through on how to enable this in the documentation. Any help would be great! Thank you!!!

  I'm sure it's documented in the vMA administration guide, but you will need to use vi-logger to toggle logging remotely to your host ESX (i)

  [vi-admin@scofield himalaya.primp-industries.com][http://reflex.primp-industries.com|http://reflex.primp-industries.com]$ vilogger
  Usage: vilogger 
  command is one of:
          enable          [--server ]
                          [--logname ]
                          [--collectionperiod ]
                          [--numrotation ]
                          [--maxfilesize ]
  
          disable         [--server ]
                          [--logname ]
                          [--force]
  
          list            [--server ]
                          [--logname ]
  
          updatepolicy    [--server ]
                          [--logname ]
                          [--collectionperiod ]
                          [--numrotation ]
                          [--maxfilesize ]
  
          help | --help | -h  []
  

  Journaling saves only files default base, particularly on ESXi where you don't find additional newspapers such as the Console of Service ESX classic iSCSI newspapers.

  Here's a look at what he's going to capture.

  hostd.log  hostd.log.1  messages.log  messages.log.1  vmkernel.log  vmkernel.log.1  vmksummary.txt  vmkwarning.log  vmkwarning.log.1  vpxa.log  vpxa.log.1
  

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• How to activate the silent mode for iPhone 7 more?

  Hi, this is my first time using iPhone

  I searched online, but not lucky to find how to disable my phone...

  anyone happen to know?

  Thank you very much!

  Tap Settings > do not disturb then switch either manual or scheduled IT.

  When do not disturb is activated, you will see a in the status bar. There are two ways to turn on or off the do not disturb:

  If do not disturb is not want you wanted to say, tap Settings > sounds turn vibrate silent walk,.

• How to activate the AHCI Mode on an HP Mini Notebook 210-2000?

  I just need to know so that I can install Windows 7 Premium and replace Windows 7 Starter on this subject. I don't see the option anywhere in the BIOS, which is the version InsydeH20 F.13.

  Thanks in advance.

  Hello:

  AHCI is enabled by default and the setting can be changed to anything else.

  Paul

• How to find the history of Tablespace in Oracle database?

  Hello

  I need to find which data was inserted on the weekly basis in the particular tablespace.

  Because we need to find which tables update very frequently, and also we didn't have plenty of space in the server.

  If we can find it, it would be useful for us to communicate with the developers.

  Thank you

  Shiv.

  For tablespace growth

  ==================

  Select

  TO_CHAR (sp.begin_interval_time,'dd-mm-yyyy "") days.

  TS.tsname,

  Max (round ((tsu.tablespace_size* dt.block_size) /(1024*1024), 2)) cur_size_mb,.

  Max (round ((tsu.tablespace_usedsize* dt.block_size) /(1024*1024), 2)) usedsize_mb

  Of

  dba_hist_tbspc_space_usage tsu,

  dba_hist_tablespace_stat ts,

  dba_hist_snapshot sp,

  dba_tablespaces dt

  where

  Tsu.tablespace_id = ts.ts #.

  and

  Tsu.snap_id = sp.snap_id

  and

  TS.tsname = dt.tablespace_name

  and

  TS.tsname not in ('SYSAUX', 'SYSTEM')

  Group

  TO_CHAR (sp.begin_interval_time,'dd-mm-yyyy ""), ts.tsname

  order of ts.tsname, days;

  To check the tablespace free sapce

  ================

  Select nom_tablespace, sum (bytes) /(1024*1024*1024) from dba_free_space where nom_tablespace = group 'LARGE_DATA' order by 2 desc nom_tablespace

  To check the size of tables

  =================

  Select sum (bytes) in dba_segments where nom_segment = "XYZ";

  Thank you

  Harman

• How to activate the mode without failure in a game?

  U see sometimes games run faster in mode safe & probably, I like it but I don't know how to activate it in gaming applications only in games ok?

  How to activate the mode without failure in games?

  AI

  Most of the games do not work in safe mode, because safe mode loads only the system drivers and not the games so it is really moot to wonder if he would run faster.

  You can start in safe mode by pressing F8 during startup. You will see that the game does not load again.

• change log mode archive without closing the database

  Hi all
  
  Is it possible to put the database in archive log mode before you shut down the database, and when the database stops and starts, the database should automatically be in log mode archive?
  
  because we cannot stop the database in the days of the week and we have system restart the weekend and we are not here this day here. So is there a way to set the database in the log archiving across the memory so that each restart of the database, it should start automatically in log mode archive.
  
  my environment is windows server 2008 R2 with oracle 11.2.0.3
  
  Thanks in advance.
  
  Published by: 931643 on 5 December 2012 10:37

  931643 wrote:
  Thanks for the reply Max Seleznev,

  First of all I thought to write the script to include in this process. But we cannot run all the commands in the sqlplus using windows task. for example:

  You can write a batchfile as below:

  CD.
  sqlplus / as sysdba
  Select name, open_mode from v$ database;

  When you run this, it will open up to sqlplus prompt but then will not run the query.

  This is the reason why I am to know if there is another way.

  Thank you

  When you do things wrong, you do not get the desired results

  Please desired SQL in a separate file (run.sql), then proceed as below

  sqlplus scott/tiger @run.sql

• How to activate the Guard Data after test on the backup database

  Hi all

  I have a plan for the test of standby database and this is my plan

  1. check the gap newspaper archive and transfer the logs to check if necessary

  2. stop the replication Data Guard

  3 stop Standby Database

  4 back-up Standby Database before the test

  5. starting Standby Database to test (and main database fixed by using the user and performs operations during testing)

  After trials and Active Data Guard

  1 restore a database to the standby since before the backup set

  2. start Standby Database in the mode standby

  3. check Data Guard

  I have a question. Can I use log archiving of primary to apply pending before activate Data Guard? or must reconfigure DataGuard to activate Data Guard after having tested?

  Thank you

  Hiko

  Yes you can do it.

  following the procedure below.

  1 apply the logs to archive left on the previous day.

  2. the database pending judgment.

  3. take backup controlfile and data files.

  4. start the database in the editing phase.

  5. turn on the standby database. 'alter database activate standby database'

  6. then do what ever you want to test.

  7. once it is filled the database ensures activated.

  8. restoration of the database from the backup.

  9. then start appplying archive of the last archive applied before the database was arrested.

• remove the logs of archiving in log_archive_dest_2 with RMAN

  Hello
  
  Installation program:
  Primary DB: oracle 10g
  Standby DB: Oracle 10g
  Physical active DataGuard paused.
  
  We nun RMAN on the primary db every night, which also removes the archives connects log_archive_dest_1 located on the primary server. How to activate the same working RMAN delete logs archiving in log_archive_dest_2 located on the backup server.
  
  -Shashi

  Hey Shashi,

  You can use similar job on your backup server for the removal of the old archivelogs in about 1 week. Also, please pay attention to the setting of the RMAN ARCHIVELOG DELETION POLICY on the primary database. Maybe it's to set as APPLIES ON STANDBY to prevent the removal of the archivelogs not yet applied to the primary.

  Best regards
  Alex

• How to activate the player on Firefox mobile 20

  Yesterday, I've just updated my Firefox to worm 20 but when I browse the news site I found no icon for a book on the address bar which activate the drive mode. Please help me, how to enable it.

  If your Android device has less 384 MB of free RAM available, drive Mode is not available, as it is under our optimal requirement.

• How to activate the face recognition login

  Hello

  Can someone tell me how to activate the face recognition login my computer instead of the normal password

  Hello

  You can run these steps:

  1. register new account
  2. Enter the parameters click the logon tab
  3. turn on last automatic selection of titles
  4. you can also choose the first option in authentication mode
  5 restart your laptop
  6. in the laptop restarts, click on change user
  7. Select start Face recognition

  All that s!

  It's working now?