Activate the integrated graphics controller (Acer Aspire M3970)

Similar Questions

• Qosmio F50-126: how to activate the integrated graphics card?

  Running Windows 7 on F50 - 126.
  After checking my specs on the site Web of toshiba, here are the details on my graphics card: -.

  Manufacturer: NVIDIA;
  type: NVIDIA; GeForce; 9700 M GTS supporting TurboCache; technology
  memory: 512 MB dedicated VRAM (up to 1 791 MB of total available graphics memory using the TurboCache™ technology with 3 GB of system memory)
  memory type: GDDR3 (800 MHz) video RAM (resp. RAM video and system memory combined)
  connected bus: PCI Express 16 x

  I want to know if I can turn on my integrated graphics card. I know that clicking on powersave suppose to turn off my 9700 m and go to the integrated card, but the laptop did not want it actually disabled.
  Like, watching a video or a game of battery the difference between "Powersafe" and "Balance" is not that much.

  The computer seems to work at full power.
  Because I remember when I had Vista installed, the game and used trolling videoes. But on windows 7 it doesn't. Anyone know how to activate the integrated card?

  I have my computer updated completely and everthing... How d I do not know if my card is turned on or off?

  Hi mate

  I'm a bit confused of m.
  Why?
  Because you ask about activation and deactivation of the graphics card (integrated).

  First of all, there is ONLY a single graphic chip!
  It s a GeForce 9700 M GTS graphics card.

  The graphics chip supports the 512 MB GDDR3 own (he dedicated video memory s) and it s is always available!

  In addition, the chip supports shared system memory. It depends on the available main memory!

  For example:
  * With the help of Win 32 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB (using 3 GB of RAM you 1279 MB)
  TOTAL available graphics memory: 1279 MB (1791 using 3 GB of RAM)

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1279MB
  TOTAL available graphics memory: 1791 MB

  * With the help of Win 64 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB
  TOTAL available graphics memory: 1279MB

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1791
  TOTAL available graphics memory: 2303

  As you can see the use of Win 64-bit and 4 GB of RAM would be better for the graphics card as the use of the file Win 32 bit with 4 GB of RAM

• Disable the integrated graphics card?

  Hello

  I have a Dell XPS 15 L502X. So I recently installed a game called Wolfenstein: The New Order. And everytime I start the game I get an error known on the web as "wglCreateContextAttribsARB failed".

  I know that the cause of the error is that the game keeps identifying my integrated graphics (Intel HD 3000) as the main graphics card so that I have a dedicated onboard graphics (Nvidia GeForce GT 540 M, 2 GB dedicated memory).

  The problem is that my integrated card only supports OpenGL 3.1 and below, although my GPU supports up to OpenGL 4.0. I know for a fact that this GPU is able to run the game and YES I already chose my GPU as the primary graphics card under manage 3D, the global settings settings AND parameters of the program specific AND even tried setting the PhysX Configuration as the GPU itself at unsuccessfully.

  I also tried to disable my Intel HD 3000 by Device Manager (couldn't turn it off via bios), but whenever I do so that turns off the display of my laptop. However, I have a TV that my laptop is connected via HDMI. If my laptop screen is transferred to my TV and I can not change/turn my laptop displays ONE unless I had to re - activate the integrated graphics card. Strange in my opinion!

  On the other side, I ran the game without the integrated graphics card (when), and the game runs very well! CLEARLY the GPU (GT 540 M) is able to run this game, although the game is not identify him. Instead only identify the integrated Intel HD Graphics 3000 card or identifies the onboard graphics as the main reason any!

  Need help please, I want to play the game on my laptop screen not on my TV... Also on a side question, is it possible to completely disable my integrated graphics (Intlel HD 3000) without losing my screen? If so, how?

  Thank you for your time.

  EDIT: I discovered that a similar problem, I used to have with another game (watch dog) on the demanding game run my video card to support DirectX 11 for the game (so it never ran), now works correctly when I turn off my integrated graphics card and use my TV as my main screen! EVEN IF my GT 540 M is to satisfy the minimum requirements for the game!

  You can switch between graphics cards - Intel low performance for graphic intensive application of navigation/less graphically and using nVidia graphics high-performance hungry applications in graphics resources like games.

  You can take a look on the link shows to switch between the graphics card Intel and discrete graphics (nVidia, in your case):

  http://www.YouTube.com/watch?v=DCh9Eob0mNY

• How to activate the onboard graphics on a cartridge to calculate UCSME-1414?

  I have a UCSME-1414 calculate the part of the cartridge to a UCS 4308 chassis. This cartridge contains a CPU with Integrated GPU that can be used to accelerate video processing. To use it, I need to activate the "Integrated graphics" option in the BIOS, but it is grayed out (see screenshot) and I'm unable to change the option.

  Is there a way to activate the integrated graphics card?

  Thank you!

  You attempted to set this value to enabled in the BIOS UCS Manager strategy? You can also set the CLI:

  one

  

  HTH,

  Wes

• HPE h9-1001de: HPE h9-1001de - broken graphics card can I use the integrated graphics card Intel?

  I bought this PC four years ago (just the version, not CS as in the link):

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03106002

  The integrated graphics went broken today. Research on the spec Web site I noticed that the Intel's integrated graphics. I won't buy another video card, if there is a graphics processor integrated into the processor.

  Indeed, there are two additional DVI ports; However, they are sealed with a sign "DO NOT REMOVE", and each port is sealed with two screws with a strange format (star with six faces?).

  Why these DVI ports are sealed? Why with this format live strange? I hope that's not for licensing reasons, and that I'm still able to use them as DVI ports...

  Thank you.

  Hello:

  I don't think it is sealed for any other reason than from your PC with a video of the add-on card, they would not people plugging in these ports DVI cables and by calling HP support complaining that the video does not work (because an add on card disables the integrated graphics card).

  Remove your discrete PCIe x 16 graphics card, so the built-in graphics card is enabled, put your hand on the good size torx screwdriver and remove the cover, so you can use the integrated graphics card adapter.

• Different in the integrated graphics card as says compney

  I bought HP 15-g002AX a month... before you buy I read the specifications carefully... everywhere I found that the integrated graphics card is AMD radeon hd 8570 m 2 GB, but after you buy and check the graphics card it is Amd Radeon Hd 8500 m and graphics Amd Radeon (TM) R5

  Dishant99 wrote:
  I bought HP 15-g002AX a month... before you buy I read the specifications carefully... everywhere I found that the integrated graphics card is AMD radeon hd 8570 m 2 GB, but after you buy and check the graphics card it is Amd Radeon Hd 8500 m and graphics Amd Radeon (TM) R5

  "Amd Radeon Hd 8500 m" is the series to which belongs an AMD HD 8570 m.

  You can download and run CPU-Z to correctly identify the discrete graphic card installed in your laptop. The Graphics tab as shown in the picture. You can use the Catalyst Control center first select the Radeon HD 8570 m. Switchable graphics on HP laptops

  

• HP Pro 3130 microtour: use the integrated graphics card Intel H57 Council

  Good afternoon.
  Motherboard HP Pro 3130 Microtour here MS-7613.
  What you need to install the CPU, which it was possible to use the integrated graphics Intel H57 Board adapter?
  Poised the Lynnfield Quad Core Intel Core i7-870, 3300 MHz. It does not work with an integrated video card.
  External graphics in the PCIe slot only.

  Hello:

  Please refer to page 3 of the quickspecs at the link below... specifically the part where it says: NOTE: HP Pro 3130 with Intel Core i5 750 processor or any what Intel i7 processor has no integrated graphics card.

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04290878.PDF

  You will need to add a graphics card into the PCIe x 16 slot.

• It is an error in the data sheet? Acer Aspire 11 switch (SW5-171-39 LB vs SW5-171-80 KM)

  According to technical data sheets, I found the following information:

  Acer Aspire switch 11 - SW5-171-39 LB

  CPU = Intel Core i3-4012Y
  Storage = 128 GB SSD
  Height x width x depth = 1 x 11.7 x 8.1
  Weight = 3.42 lbs

  Acer Aspire switch 11 - SW5-171-80 KM

  CPU = Intel Core i5-4202Y
  Storage = 128 GB SSD + 500 GB
  Height x width x depth = 0.4 x 11.7 x 7.6
  Weight = 1.87 lb

  Is this right? The model with additional HARD drive storage has a lighter weight and more small dimmentions? Or is it a mistake?

  Hello

  Specification of the switch 11 (SW5-171-xxxx):

  -11.73 x 7,57 x 0.42 inch pad only.

  -11.73 x 8.09 x 0.98 inch pad and dock

  -11.73 x 8.09 x 0.98 inch pad and dock with HARD drive

  -1.87 kg with battery 3 cells, pad only

  -3.42 kg with battery 3 cells, pad and dock

  -3.64 kg with battery 3 cells, pad and dock with HARD drive

• I don't know how to re-enable the microphone of the headset on my Acer Aspire E15

  Hello

  I have a big problem with my laptop, I don't know how to re-enable the microphone of the headset on my Acer Aspire E15

  I was able to remedy.

  Here is the solution: http://community.acer.com/t5/E-and-M-Series-Laptops/Headset-microphone-is-not-working-on-Aspire-E14-...

• How to access the BIOS on an Acer Aspire V3 - 571 G-9636

  How to access the BIOS on an Acer Aspire V3 - 571 G-9636.

  I want to disable UEFI and secure boot.

  I tried pressing F2, from switching on the laptop of a closed state.

  I tried to hit once, several times he spamming on boot to the top. The laptop still start with windows 8 and I want to remove.

  It is an old NET, but I see a lot of traffic to it if I want to provide an official solution for her. The thread is locked because of his age, please pick up a thread to update or do not hesitate to post your own!

  Here's the article on How to access the UEFI (BIOS) for Windows

• I want to upgrade the RAM in my Acer Aspire 5736z-4826.

  I want to upgrade the RAM in my Acer Aspire 5736z-4826. I've seen different specifications on the laptop. Some people say that it can hold 8 GB of RAM and some say 4GB. I don't know the exact type of RAM that works. I ordered 2x2gb RAM PC3-12800 DDR3 of Crucial, and he was not compatible and caused the screen doesn't Flash at max resolution. I think the problem is, it should be PC - 8500 DDR3 RAM. Can someone please give me some information since there is NO information on the web on this particular laptop. Thank you.

  I don't have the model of your computer, but sometimes when there's confusion about what memory, people use Speccy or CPU - Z or HWinfo to determine what memory is currently installed.

  https://www.Piriform.com/Speccy/download/standard

  http://www.Hwinfo.com/download.php

  http://www.CPUID.com/softwares/CPU-z.html

  My Acer desktop computer:

  

  

  

• "could not activate the integration features" on virtual PC

  My host is running Windows 7. my virtual machine has XP Pro. It worked, but now when I try to run it in XP Mode I get the message "could not activate the integration features. When I click to go forward in any case, I get a black window with a slider _ and nothing doesn't work to open my virtual machine.

  Hi Randall,.

  Since the problem is related to the Windows XP Mode, I suggest you post your question in the below related forums.

  Windows Virtual PC and XP Mode Forum

• I can't have the clock on my Acer Aspire 3680 at the time.

  Home Basic to Windows and clock

  I can't have the clock on my Acer Aspire 3680 at the time. I changed the battery of the BIOS and know that it's good. I did everything that I can think of to fix the problem with no fix. Can someone give me help with that.  It is very annoying.

  The game, February 16, 2012 19:23:50 + 0000, WilliamGronlund wrote:

  When setting power off or down it stops.

  Do you mean that if you turn off at 15:00 today and then put it
  tomorrow at 09:00, there are always 15:00 today?

  If you mean something else, please explain what it is?

  And when you run and you set correctly, it keeps the
  exact time?

  Windows family based.

  What basic home edition Windows? I guess say you Windows 7, but please
  confirm my hypothesis is correct.
  Ken Blake, Microsoft MVP

• How can I disable the integrated graphics card Intel so I can adapt the best graphics card Optiflex 270

  I have a FSFY27J that I under stand is a Dell optiflex 270.

  How can I disable the integrated graphics card Intel so I can adapt the best graphics card

  Thank you

  Walter

  Hi Walter-W,

  If your system is an OptiPlex gx270s you top AGP slot to set up a discrete video card. The integrated video card is automatically disabled when you connect the discrete video card.

• Could not activate the integration features

  I clicked on start > all programs > Windows Virtual PC > Windows XP Mode.  Instead of loading Windows XP in the VM, I get an error message that says "could not activate the integration features", which would cause this error message?

  MLMH

  I just had the same thing happen. When I chose to continue, I got was a black screen and no option to enable the integration features.

  I found the settings screen for XP Mode via the start menu, all programs, Windows virtual PC, Windows Virtual PC. Right-click on the Virtual PC icon in windows, and then select settings. Select close and then change close automatically with the following measures: to Hibernate to stop.

  When I closed the window the next time xp mode, he asked me if I really wanted to force the shutown of the window, I said yes. The next time I started windows xp mode it came and all my programs were OK...

  Hope this helps