How to activate the onboard graphics on a cartridge to calculate UCSME-1414?
I have a UCSME-1414 calculate the part of the cartridge to a UCS 4308 chassis. This cartridge contains a CPU with Integrated GPU that can be used to accelerate video processing. To use it, I need to activate the "Integrated graphics" option in the BIOS, but it is grayed out (see screenshot) and I'm unable to change the option.
Is there a way to activate the integrated graphics card?
Thank you!
You attempted to set this value to enabled in the BIOS UCS Manager strategy? You can also set the CLI:
HTH,
Wes
Tags: Cisco DataCenter
Similar Questions
-
Qosmio F50-126: how to activate the integrated graphics card?
Running Windows 7 on F50 - 126.
After checking my specs on the site Web of toshiba, here are the details on my graphics card: -.Manufacturer: NVIDIA;
type: NVIDIA; GeForce; 9700 M GTS supporting TurboCache; technology
memory: 512 MB dedicated VRAM (up to 1 791 MB of total available graphics memory using the TurboCache™ technology with 3 GB of system memory)
memory type: GDDR3 (800 MHz) video RAM (resp. RAM video and system memory combined)
connected bus: PCI Express 16 xI want to know if I can turn on my integrated graphics card. I know that clicking on powersave suppose to turn off my 9700 m and go to the integrated card, but the laptop did not want it actually disabled.
Like, watching a video or a game of battery the difference between "Powersafe" and "Balance" is not that much.The computer seems to work at full power.
Because I remember when I had Vista installed, the game and used trolling videoes. But on windows 7 it doesn't. Anyone know how to activate the integrated card?I have my computer updated completely and everthing... How d I do not know if my card is turned on or off?
Hi mate
I'm a bit confused of m.
Why?
Because you ask about activation and deactivation of the graphics card (integrated).First of all, there is ONLY a single graphic chip!
It s a GeForce 9700 M GTS graphics card.The graphics chip supports the 512 MB GDDR3 own (he dedicated video memory s) and it s is always available!
In addition, the chip supports shared system memory. It depends on the available main memory!
For example:
* With the help of Win 32 bit system *.System memory: * 2 GB *.
Dedicated video memory: 512 MB
Shared system memory: 767 MB (using 3 GB of RAM you 1279 MB)
TOTAL available graphics memory: 1279 MB (1791 using 3 GB of RAM)System memory: * 4 GB *.
Dedicated video memory: 512 MB
Shared system memory: 1279MB
TOTAL available graphics memory: 1791 MB* With the help of Win 64 bit system *.
System memory: * 2 GB *.
Dedicated video memory: 512 MB
Shared system memory: 767 MB
TOTAL available graphics memory: 1279MBSystem memory: * 4 GB *.
Dedicated video memory: 512 MB
Shared system memory: 1791
TOTAL available graphics memory: 2303As you can see the use of Win 64-bit and 4 GB of RAM would be better for the graphics card as the use of the file Win 32 bit with 4 GB of RAM
-
How to disable the onboard graphics via bios on y410p
my game crashes during playback. I looked for solutions for 3 months and found the solution.
the solution is to turn off optimus on bios.
but there is no option to say anything on the gpu.
PS: I know how to get to the bios.
-
How to activate the resolutions of wide screen on Satellite Pro A10
Hello
I looked through various positions through the forums, but have not found how to activate the wide screen on a Toshiba Satellite Pro A10 resolutions.
The 2 following wires offer partial answers:http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19570
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677The solution in the 2nd post won't work because the A10 has an Intel graphics card, not a Nvidia. He suggested also, modify the INF of the graphics driver, but to extract the driver (SA10B2DP.exe) file includes an installer, but no INF.
Just look to see if anyone has any advice on how to activate the resolutions such as 1440 x 900 or 1680 x 1050.
Thank you
Hello
you mean on the external screen, Don t you? If you have an intel chipset graphic why Don t you download the drivers from the website of intel.
Maybe it offers a resolution of the external display.I don't know if the res external can be set to widescreen on this chipset as the drivers are somewhat limited...
Can you describe what monitor you have and how you connect it to your machine. (d-sub or DVI)?Would appreciate some reactions :)
Welcome them
-
How to activate the S-video port on a satellite M30X 154?
Hey does anyone know how to activate the S-video port on your laptop by Satellite SM30X-154?
If I press the FN + 5 keys the only options I get is LCD and no S-VHS option. My TV is set up for this I have Watch DVD through the cable.
When I connect the cable to the laptop, nothing happens!
HelpHello
Sorry, my A100 Tosh has a Geforce 7600, I don't know what is your GA.
But on mine, I have a NVidia Control Panel, where I can configure dualview,
normally, which allows me to choose between the builtin LCD and the external monitor (VGA Port).When a TV is plugged and not recognized, I can apply recognition there.
Relative to the opening of the Panel, the TV is also available.Maybe I could help you.
If this isn't the case, note that the settings of windows your TV is not available.
Try to go to the User Interface of your graphics card...Matz
-
How to disable the integrated graphics card? HP Pavilion a6400f
I intend to install a new NVIDIA PCI-E x 16 video card, but my HP Pavilion a6400f comes with an Intel integrated graphics. I know that you need to disable the onboard graphics, but how? I checked the BIOS but couldn't find an option to turn it off. Any help?
Message edited by soadfreak2005 on 01/16/2009 11:24You go to control panel, system maintenance, and then Device Manager. Scroll down and look for graphics cards, click the plus tab, click on the model of integrated graphics card you have. Then right click and a menu appears, select turn off and that's all. Then follow the instructions on your new graphics card. Good luck...
-
Disabling the onboard graphics for PC Compaq Presario PC SR5123WM
http://h10025.www1.HP.com/ewfrf/wc/product?LC=en&DLC=fi&CC=fi&lang=Fi&product=3443290&
There is a link to my PC, how can I disable the onboard graphics? If there is a cable on the MOBO where would it be?
Remove any applicable integrated video driver in windows. If you get the video of the PCI-E x 16 slot, so the system works correctly. Bad video output could be the result of a bad or insufficient GPU for GPU. A lot of high-end cards will need to the power port of 6/8 pins on the GPU.
Note that the saturation of the GPU to high resolution will also result in a also noted distortion. Drop the resolution up to 800 x 600 and repeat the test.
Message edited by RoyalSerpent on 03/22/2009 08:50 -
How to activate the spell checker
I use Mozilla Thunderbirds e-mail and would like to know how to activate the spell checker - Help
http://email.about.com/od/mozillathunderbirdtips/Qt/et_inline_spell.htm
-
How to activate the pop-up windows?
I can't fill a demand for services with ASCAP because I've not enabled popups. So, how to activate the pop-up windows?
You can uncheck the block pop-up windows under the Orange Firefox button > Options > Options > content tab.
-
How to activate the BT on the Satellite C660-184?
Toshiba produces online information continues to tell me that the Bluetooth 3.0 is available for my computer, but annoyingly not to tell me how I can get it.
It would be useful that this information came with a link that I can use to act on the information.
Does anyone know how bluetooth can be enabled on my computer?
All the info and the latest BT downloads, you can find the portal of Toshiba BT - http://aps2.toshiba-tro.de/bluetooth/
How to activate the BT?
Activate WLAN first and when WLAN led on the key FN + F8 use combination and allow to BT -
r204tx: how to activate the deletion warning on hp computer laptop r204tx
Hi all!
Recently I bought hp laptop r204tx with Win. 8.1 - 64 bit, however, whenever I want to delete any file, folder, etc. I press the button Delete and deletes directly without any warning or alert!
Please, help me to solve this problem and enable the alert message for the delete option...
Thanks in advance!
How to activate the Confirmation alert delete:
http://www.askvg.com/how-to-enable-delete-confirmation-dialog-box-in-Windows-8/
-
Terca M4: How to activate the external ports, DVI and analog?
Please can someone please tell how to activate the two external ports. I would use two DVI and analog to the office. Currently if you activate a second screen machine sets up the flat screen and the other the DVI external display. Is this in any way about this?
See you soon
Hi Matthew
As far as I know you can connect an external monitor or a TFT. For this you can use the VGA (15-pin) port or DVI - D video, supported by PortReplicator III (PA3314E).
Sorry, but I don't understand why you need the two holes at the same time. How many external screens that you want to use? Sorry if I'm missing something but perhaps you can explain your wishes more precisely.
Good bye
-
Satellite Pro U200 - how to activate the bluetooth connection
How to activate the bluetooth connection?
Hello
First check to see if your computer supports BT
If the laptop supports BT, then you should find a BT tag at the bottom of the unit.
If there is no label then your machine was not equipped with internal BT module!If the laptop supports BT, then use the FN + F8 key to go to the BT
Then BT should start installation and configuration.For more details, see this forum and this Toshiba BT Portal:
http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ -
How to activate the LCD in Satellite C850-B374 sensor after the BIOS update?
Hi, friends
I m currently a customer satisfied with Toshiba since April 2013. I've been using laptops since 2007 after using different brands, I found Toshiba to be good.
I recently updated the Bios from 6.0 to 6.50 of the Toshiba service station.
Update was successful and the computer works fine.But after restarting the LCD sensor that activates the power button in this model of laptop does not work. After entering the utility parameter that I came to know that CE of bios version is 6 and bios version 6.50 so how to activate the sensor lcd start automatically while I open the lcd screen
Ashik
> How to activate the sensor lcd start automatically while I open the lcd screen
You want to start Notepad by opening the cover. Right?
In this case you should enable the option in the system of Windows 8 settings[Why my laptop Windows 8 start automatically when you open the cover of the display? | http://APS2.Toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm]
"You need to find the option called: + open Panel - Power On" feature.
This option must be enabled in order to automatically start the computer when the display lid is opened -
How to activate the face recognition login
Hello
Can someone tell me how to activate the face recognition login my computer instead of the normal password
Hello
You can run these steps:
1. register new account
2. Enter the parameters click the logon tab
3. turn on last automatic selection of titles
4. you can also choose the first option in authentication mode
5 restart your laptop
6. in the laptop restarts, click on change user
7. Select start Face recognitionAll that s!
It's working now?
Maybe you are looking for
-
ReadyShare drive unusable in the DOS command prompt
I have a Nighthawk C700 - AC 1900 WiFi cable router Modem where I configure drive ReadyShare USB access. When I type the UNC "\\READYSHARE\USB_Storage" and type the Admin password for write access - I "can" see the files/disc in Windows Explorer. I c
-
Display problem on the dv7 series laptop quick launch buttons
Hello I have a new pavilion dv7-6b55dx laptop and I put windows 7 Professional (64 bit). Since that time (because before there home edition of the best buy store) everytime when I use a function key I don't see no display on the screen, for example,
-
Can I create a new XP Cd if I still have the CD - Key?
Some time ago I lost my CD of instalation of Windows XP, and now I need to reinstall windows. Can I create a new CD that I can install Windows off if I still Code of the CD authentication or should I buy another? And if I can create an other someone
-
Windows Vista Upgrade OxC0000005 error message
I had a virus on my PC Windows Vista and had to remove the operating system. I was unable to reinstall Vista and had to downgrade to XP successfully. Now I am trying to upgrade to Vista and I get an error of OxC0000005 trying to complete the instal
-
Hope someone can help me, I me upgrade the firmware on a 8300 colleagues, he crashed with a fatal error. He must have reached a stage where he has updated and was about to copy the original data back in because that all user information are empty. I