activate the trim on el capitan?

Similar Questions

• Is it necessary activate the TRIM on a MBP?

  Recently, I installed a Samsung SSD 850 EVO on my MacBook Pro mid 2012, I don't know a lot about the issue of BALANCE, it is necessary to enable it? Is there a risk? I borrowed a HD to make my backup and I'll buy one for me next year, that's my problem if I activate the TRIM and any problem appears that I'll lose my data.

  Suggestions? Thank you.

  You should not have any question to GARNISH on your drive. But, why would you? Do you do a lot of paperwork on your drive? If so, TRIM can help you. Personally, I don't use trim on any of my 3rd party SSDs. Playback is without having to since most of the activity. The SSD built in Garbage Collection works very well.

  Your signature seems to show that you run El Capitan. If Yes and you want to activate the TRIM on your Samsung SSD, open Terminal and run the following command: sudo trimforce allow this requires an administrator password and you will get the warning from Apple information before proceeding.

• Should I activate the TRIM?  Profile of said system that both my SSD have NO TRIM support...

  Hello!

  I'm new in the world of SSDS.  I recently bought two SSDS for use with mini OWC Thunderbay e:

  ADATA SP550 - my OS El Capitan

  Samsung 850 EVO - storage media

  When I go to each drive in System Profiler, each have a bug, fat 'no' next to the field in Support of TRIM.

  I know that Apple does not want to take charge of third party records, because they will not be held responsible for data loss or corruption.  That's why System Profiler telling me this?  Or are these two truly on readers list it naughty and I should definitely not turn Trim?

  I appreciate all of your comments!  Thank you!

  This isn't a bug. That's all just a report. Unless you are using an Apple brand SSD TRIM is not enabled. It's normal. You need a third-party utility to allow the TRIM: Trim Enabler. Or you can leave this option disabled. SSD of today can better actual work without TRIM. So you might as well not worry. See topping Talk. If the SSD using a controller strength sand THAT TRIM is not really necessary.

• How to activate the faults COMMITTED to an internal SATA hard drive, but not the other, on Vista Home Premium 32-bit?

  I have a set of 17-inch laptop 2008 which contains two hard drive bays internal, purchased in June.  It came with a single hard drive (traditional spinning disc).  It is running Service Pack 2, Windows Vista Home Premium 32-bit.

  My SATA controller is an Intel 82801GBM/GHM (ICH7-M family); I think it's a first-generation SATA controller (1.5 Gbps).

  I received recently a 160 GB Intel X - 25 M SSD (second generation SATA, but it is fully compatible with the first generation controllers, without additional or jumpers configuration) as a gift from my wife.  I removed my first hard drive completely, installed the SSD in the main Bay and installed Windows, drivers and the Intel SSD utility.  I then reinstalled my HDD original in the second span, completely wiped and reformatted it as a partition; It currently contains my music and other multimedia files.

  The utility Intel SSD tells me I should activate DIPM for my SSD as opposed to HIPM.  This seems to take a bit of tinkering to make Vista, and my situation is further complicated by the presence of my HARD drive (original) secondary, which prefer to use HIPM.

  I read the article on the Microsoft Web site on editing the registry to activate the misconduct, and it's something I would feel comfortable doing. However, I don't want my SSD to use DIPM, my HARD drive is expected to continue to use HIPM, and I was afraid that the proposed fix would allow the misconduct for all readers.

  Could someone let me know how I can activate DIPM for my SSD while continuing to use HIPM to my HARD drive, I'd be very grateful.

  EDIT: My Maintenance of SSD utility said simply that the State of the settings DIPM/HIPM "could not be determined." if Vista automatically selects the correct setting and the SSD utility does not just understand that, which makes my life a lot easier. but it would be nice to know for sure, so I can forget it all (if Vista already defined for me) or change the setting (if Vista did not automatically choose food appropriate for each disk management mode).

  You will need two SATA controllers: both on board or an edge and the other on PCI - E.

  Configure one who does not need TRIM/DIPM (do not use a SSD) as non-AHCI (compatible IDE/ATA-6) in the BIOS and the other (where TRIM/DIPM will be used) as AHCI.

  Connect the drive to which you DIPM AHCI controller. See http://www.abxzone.com/forums/f155/tip-how-enable-dipm-ssds-windows-120968.html for more information.

• How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  Settings > Notifications > Messages > display on the lock screen

• before you go swim with my series 2. I need to activate the waterlock feature? or is it automatic? and just to unlock after swimming

  TNX

  Hello

  Swimming workouts

  Begin a swim practice in the application of the workout on Apple Watch series 2 models automatically activates the lock of the water, which locks the screen to avoid accidental interactions during your workout.

  To complete your workout and to evacuate all the water:

  • Press the digital Crown and side button at the same time (which makes a break from the workout).
  • Turn the digital Crown, which opens the screen and erases all the water inside of the watch (it can make a sound).
  • Forehand and press end.

  Other swimming

  If you plan to get your Apple Watch series 2 wet in other circumstances that when training of swimming - as to the course of General wear in a pool - you can manually lock the screen first and then drain the water from the speaker subsequently:

  • Slide up from the bottom of the face of the watch to open Control Center > tap water from lock to lock the screen.
  • When you're done: turn the digital Crown to unlock the screen and drained the water from the speaker.
  • The lock can also be unexpected water activated and unlocked immediately after exposure to the water.

  After bathing, make sure to clean your Apple Watch series 2 by rinsing them with hot water from the tap. Watch and the band should be dried with a non abrasive and non fluffy cloth.

  Strips of leather and stainless steel (Milanese Loop and Bracelet links) are not water resistant, so should not be worn when swimming.

  More information:

  Work with your Apple Watch - Apple Support

  On the resistance to water Apple Watch - Apple Support

  https://help.Apple.com/watch/#/apd707b42a5e

• Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Michael T.L. says:

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• Where can I download the installer from El Capitan - can't find it on App Store

  Where can I find the download of El Capitan, it does not come up on top of a search for "El Capitan" in the App Store. Now that Sierra is out, it seems to have been hidden.

  Thanks in advance.

  El Capitan has been removed when Sierra was released.

  It is now only available if you have downloaded it once before the release of the Sierra.

  Why do you think you have need of El Capitan?

• Keyboard shortcut to change the layout under El Capitan

  I really want to be able to change the layout of the keyboard with a combination of shortcuts. Under El Capitan, it is possible that the possibility to choose Cmd + space under preferences keyboard, shortcut, input methods, but this shortcut is for the spotlight. How a combination own shortcut customized to change the layout of the keyboard under El Capitan could be defined?

  I think that spark that healed for another person and the same problem...

  http://www.shadowlab.org/software/spark.php

  http://www.maketecheasier.com/spark-easily-create-hot-keys-for-almost-any-applic creation-in-mac/2010/09/24

  http://scripts.SIL.org/CMS/scripts/page.php?Site_ID=NRSI & ID = ukelele

  http://DoubleCommand.sourceforge.NET/

  But haven't tried everything in El Cap.

• How can I change the outgoing in El Capitan mail port settings?

  My internet service provider recently changed the messaging port coming out (IMAP). How do I change this setting? I can receive messages but not send it. I can send email from the provider's Web site. It's already happened and usually I can send emails for several days. I changed the port settings in the past, but did not figure how to do it since the upgrade to El Capitan.

  If you know where to put the port, but it is not enabled, uncheck the box marked automatically detect and manage settings. Then, you should be able to change the port.

  The outgoing port will be in the SMTP settings. Each account has a configuration which you can access by selecting Edit from the context menu of SMTP.

• How to activate the spell checker

  I use Mozilla Thunderbirds e-mail and would like to know how to activate the spell checker - Help

  http://email.about.com/od/mozillathunderbirdtips/Qt/et_inline_spell.htm

• If I open show history, I can't close it. There are two gray arrows that do not work but no close button. With the help of el capitan for mac.

  I can't show all close the page of history. I used to be able to before the upgrade to el capitan. Now, there is no close button on the history page. It doesn't go away until I got close FF.

  Feel free to undo changes. You may need to quit Firefox first to release the files currently in use.

  In addition, you should be able to close the dialog box library using Cmd + w (close tab) or Cmd + Shift + w (close window). Or does any of these work for you?

• How do I activate the calendar when you first start, I chose disable

  I can not activate the calendar. On the first run, I chose 'Disable sockets calendar' and now I can not activate.
  How to activate?

  I try to reinstall Thunderbird and add addons Lightning, but even now calendar options.

  We managed to solve the problem of:
  1. Uninstall addition
  2. restart Thunderbird
  3. search for the site of the add-on and reinstall.
  4. restart Thunderbird and once the question arose as to the introduction of the calendar.

  Problem has been resolved.

• Modem remains on after the installation of El Capitan

  Hi all

  Since the installation of El Capitan, my modem seeing 'Link' continues to blink (yellow) after that my mac is asleep or off. It flashes green when my mac is active and has been turned off when it is idle. Is this a new normal and is it bad for the modem?

  I don't know what kind of modem you have.

  I suggest do you a hard restart of the modem - see if the old behavior back.

• Activate the blocker warnings

  Hi - I want to get some screenshots of the activation of the blocker in Firefox, but even if I visit a Web site where pop-ups are blocked, it shows that very briefly the warning, then disappears. I want it to show up properly so I can-screenshot it and show my users how to allow popups for a particular site (without them going into the settings and do it manually).

  Any ideas how I can re - activate the blocker warnings?

  I looked at a few parameters in: config, but they seem to imply it is active:

  browser.popups.showPopupBlocker; true
  privacy.popups.showBrowserMessage; true

  Perhaps using this Web page to test the trainer will help you. A warning bar appears and stays there for me with a lot of these 'tests '.
  http://www.PopupTest.com/