Is it necessary activate the TRIM on a MBP?

Similar Questions

• activate the trim on el capitan?

  How can I activate the "Trim" on El Capitan?

  The following may help: http://osxdaily.com/2015/10/29/use-trimforce-trim-ssd-mac-os-x/

• Should I activate the TRIM?  Profile of said system that both my SSD have NO TRIM support...

  Hello!

  I'm new in the world of SSDS.  I recently bought two SSDS for use with mini OWC Thunderbay e:

  ADATA SP550 - my OS El Capitan

  Samsung 850 EVO - storage media

  When I go to each drive in System Profiler, each have a bug, fat 'no' next to the field in Support of TRIM.

  I know that Apple does not want to take charge of third party records, because they will not be held responsible for data loss or corruption.  That's why System Profiler telling me this?  Or are these two truly on readers list it naughty and I should definitely not turn Trim?

  I appreciate all of your comments!  Thank you!

  This isn't a bug. That's all just a report. Unless you are using an Apple brand SSD TRIM is not enabled. It's normal. You need a third-party utility to allow the TRIM: Trim Enabler. Or you can leave this option disabled. SSD of today can better actual work without TRIM. So you might as well not worry. See topping Talk. If the SSD using a controller strength sand THAT TRIM is not really necessary.

• Satellite P10 804: how to activate the battery icon visible on the taskbar?

  How can I activate the battery icon visible on the taskbar? Currently, I only have the type of mode e.g. bulb & color to save energy.
  I tried to activate the right click on the bar of tasks/properties/notification areas, found it necessary to icon & loaded to show always, however, the batery icon remains hidden.

  Help?

  This will not help you the battery icon appears only if the laptop is disconnected from the AC adapter and run only in battery mode.

• Satellite P100: How to activate the AHCI mode?

  As all you know, some laptops P100 series are equipped with a controller Intel 82801GBM SATA natively supports the AHCI and with a Fujitsu HDD which takes in charge the NCQ.

  However, the disc is forced in compatibility mode, and therefore the NCQ is disabled, resulting in a loss of performance (which is certainly necessary that laptop hard drives are generally slower than those of office).

  Unfortunately, there is no option in the BIOS which activates the AHCI mode and no tool like HWUtility that can twist that (although it wouldn't work). As far as I know, newer laptops support AHCI mode and there is also an option in the BIOS to enable it.

  Is it possible to activate the AHCI mode in our laptops beloved and make the most of our hard drives?

  Hello

  Do you think that the AHCI is disabled?
  You can run the Intel Chipset ID utility to determine if the ICH7DH SATA controller is already running in AHCI or not.

  However, I studied a little more on other forums that are a little more specific and find this:
  Activate the AHCI on Intel chipsets, without having to reinstall Windows 2000/XP
  http://www.Neowin.NET/forum/index.php?showtopic=457699
  and
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-62909

  But you know, everything you make are at your own risk!

• How can activate the TPM on Aspire S7-391-9886?

  Hello

  How can I activate the TPM on Aspire S7-391-9886? I went into the BIOS and the option to activate it is always grayed out. I read, it was necessary to set an admin password before the option is available, but not luck. Any clue?

  Thanks in advance

  Marcelo

  Nice day

  I remember gotting to activate in the following way as well as on one of the machines.

  1. go in the bios under the Security tab

  2 create the user and supervisor password in the bios... Please do NOT play with the HARD drive password

  3. restart the computer and go to bios and check again

  NB: If its still grayed out, it means the bios supports, BUT the physical hardware is not present. If the physical hardware allows, then you can now activate it.

  Kind regards

  FReeZA

• PXI8433/2: Jumper W1, activate the 2-Wire-Auto mode permanently

  Hi all

  I would like to run the software owner windows PCM001Z on our PXI system. The software to communicate via a port of the PXI8433/2 RS485 card thread-dual with a Toshiba frequency converter.

  Unfortunately, it seems that if the software erases him register scratch the PXI8433 uart, which leads to the deactivation of the two mode of wire.

  My Questions:

  * Is there a way to activate the 2-wire-auto mode of the PXI8833/2 permanetly?

  * What is the use of 5 riders "W1" marked on the map PXI8833/2? These jumpers could be used for the configuration of the PXI8433/2 card?

  Thank you very much in advance,

  Cheerio,

  Volker.

  Hi all

  Meanwhile, I managed to port 1 of our PXI8433/2 card in 2-wire-auto mode without echo constantly with the help of a soldering ;-) iron

  The following steps are necessary:

  1. to disable the echo, I simply connected the receiver enable pin re(4)/Re(2) (3) line RS422 MAX3086 (U7) amplifier with the

  transmitter activate pin TE (4).

  Note: The re(4)/Re(2) PIN must be bgas of CCP.

  2 2-wire-Auto mode permanently by connecting the transmitter to activate the aforementioned RS422 line

  by car on the TxRdy0 pin (21) of the OX16C954 (U11) UART. Please note that the signal of the SOW goes digital

  Insulator ADuM1400 (U1). So PIN 6 of the U1 has to be bgas since the circuit printed and connected to pin 21 of the U11.

  For RS485-2-wire-correct mode, the following windows to port 1 settings must be defined:

  [x] use the FIFO buffers

  Transmission buffer: low (1)-> sovereign placed at the border to the far left

  Transmitter/receiver Mode: 4-wire

• Warning__program error__one or more files necessary for the operation of the memorex expressit label design studio are missing or corrupt. Please use the Setup program to reinstall the software.

  Tried to update to Safari that does not work after the update. Then my printer stop working. Get the following message: 'WARNING '.
  program error
  necessary for the operation of the studio of design of memorex expressit label one or several files are missing or corrupt. Please use the Setup program to reinstall the software. »
  Already uninstalled and re-installed the software manufacturer labels several times. No luck.

  It seems it all started to go wrong after your update of Safari went wong:

  http://www.Apple.com/support/Safari/

  Link above is for Support of Safari.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  We do not know your Label program Vista compatibility.

  Check if your program is Vista Compatible:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It comes with Vista, upgrade install and activate Forum.

  Try the Vista programs Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• How to activate the faults COMMITTED to an internal SATA hard drive, but not the other, on Vista Home Premium 32-bit?

  I have a set of 17-inch laptop 2008 which contains two hard drive bays internal, purchased in June.  It came with a single hard drive (traditional spinning disc).  It is running Service Pack 2, Windows Vista Home Premium 32-bit.

  My SATA controller is an Intel 82801GBM/GHM (ICH7-M family); I think it's a first-generation SATA controller (1.5 Gbps).

  I received recently a 160 GB Intel X - 25 M SSD (second generation SATA, but it is fully compatible with the first generation controllers, without additional or jumpers configuration) as a gift from my wife.  I removed my first hard drive completely, installed the SSD in the main Bay and installed Windows, drivers and the Intel SSD utility.  I then reinstalled my HDD original in the second span, completely wiped and reformatted it as a partition; It currently contains my music and other multimedia files.

  The utility Intel SSD tells me I should activate DIPM for my SSD as opposed to HIPM.  This seems to take a bit of tinkering to make Vista, and my situation is further complicated by the presence of my HARD drive (original) secondary, which prefer to use HIPM.

  I read the article on the Microsoft Web site on editing the registry to activate the misconduct, and it's something I would feel comfortable doing. However, I don't want my SSD to use DIPM, my HARD drive is expected to continue to use HIPM, and I was afraid that the proposed fix would allow the misconduct for all readers.

  Could someone let me know how I can activate DIPM for my SSD while continuing to use HIPM to my HARD drive, I'd be very grateful.

  EDIT: My Maintenance of SSD utility said simply that the State of the settings DIPM/HIPM "could not be determined." if Vista automatically selects the correct setting and the SSD utility does not just understand that, which makes my life a lot easier. but it would be nice to know for sure, so I can forget it all (if Vista already defined for me) or change the setting (if Vista did not automatically choose food appropriate for each disk management mode).

  You will need two SATA controllers: both on board or an edge and the other on PCI - E.

  Configure one who does not need TRIM/DIPM (do not use a SSD) as non-AHCI (compatible IDE/ATA-6) in the BIOS and the other (where TRIM/DIPM will be used) as AHCI.

  Connect the drive to which you DIPM AHCI controller. See http://www.abxzone.com/forums/f155/tip-how-enable-dipm-ssds-windows-120968.html for more information.

• You can activate the port 8080 to access by browser first Infrastructure 2.0?

  By the official document, port 8080 is pre-defintied for access by browser, but it is disabled by default.

  I found a way to activate the port, but I can't find any guide on the cisco site.

  Anyone know how to activate the port 8080?

  Thanks in advance.

  Louis

  HIi Hoi;

  According to the document from cisco: http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/administrator/guide/config_server_settings.html#wp1082023

  Configuration of server settings

  The server settings page allows you to enable or disable the TFTP, FTP, HTTP, HTTPS, or compliance department. To activate the server settings or disable:

  Step 1 Choose Administration > the settingsof the system.

  Step 2 In the left sidebar menu, choose the setting on the server.

  Step 3 If you want to change the directories FTP and TFTP or HTTP and HTTPS which had been established when installing ports, enter the port (or port number, and root if necessary) number that you want to change, and then click enable or disable.

  The changes are reflected after a reboot.

  I don't know, but try to change the port 8080 number in the HTTP forward option and save it, then restart.

  I think it will work.

  Concerning

  Remember messages useful rates

• Short: activate the wildcard search

  Hello world

  I have an Oracle Linux 6.6 3 components installed:

  -Oracle short Server 7.6.1

  -Oracle short discovered Information Integrator 3.1.1

  -Oracle short Information discovered Studio 3.1.0

  I'm sorry if this is too newbie...

  I want to activate the on an attribute wildcard search to locate text in the middle of words (for example, * in * would correspond to 'find').

  I found a page with a few tracks: http://docs.oracle.com/cd/E40518_01/server.761/es_dev/toc.htm#Configuring%20wildcard%20search%20in%20record%20search

  However, I don't know how to proceed. This page shows an example of use of a web service request (' soap: envelope "). You could point me please in the directions? Do I have to create a graph, adding components "Universal Data Reader" and "Web Service Client"?

  I'm sorry if the question seems vague, but I am a bit lost...

  Thank you

  Fausto

  Dear Fausto,

  You have found the necessary information and are very near doing this task. You are also right in the doc, while we provide information on the level of WEb Services, it not there no procedure end-to-end in the Integrator user's Guide. The reason for this is because this procedure relies on the use of the standard Integrator component (not a component EID created). The component that you can put in the Integrator to send in the XML graph is called Web Services Client.

  Below, I describe the steps.

  Context:

  To activate the search by wildcard characters, you must set the schema property for the configuration of indexing to true. It's the mdex-property_TextSearchAllowsWildcards. Must be true for the wildcard search is activated.

  This property is one of several properties on the GCR (record of the Global Configuration), which is used by the indexes of the Dgraph.

  To change this property, there are several ways: using SOAPUI, or graphic Integrator with the Web Services Client component. The two methods are described below.

  1. with the help of SOAP UI for the Web Service of Config for the loading of the DGC (Configuration global registry, which is an XML document)

  You can use any Web Service, such as SOAP UI user interface tool and that it points to the Dgraph running. In this document, you can access the Configuration Web Service with this URL:
  : /short-server/ws/config / ? wsdl (this is documented on the "On the Web Service Setup").

  Then, you can send the RCMS of together again to the Dgraph, using the putProperties of the Config Web Service operation. See this topic for info; It uses the same operation for the addition of configuration XML documents: load the schema of attribute

  Then, in the SOAP UI, you can issue a query similar to the following:

  <>

  "xmlns:config ="http://www.endeca.com/MDEX/config/services/types/3/0"

  xmlns:MDEX ="http://www.endeca.com/MDEX/config/XQuery/2009/09" >. "

  true

  2 using the Integrator and its graph based on XML, for loading XML documents. For info, see this topic and some subjects beneath him.

  The Integrator user's Guide > data domains configuration > Global Configuration record, you will see that this implies essentially to create a chart that uses a Web Services Client (it is a component of standard clover you can use), to load the same RCM document that you free of charge if you use SoapUI.

  For the WebServiceClient component, specify a string similar to the following in the name of the component operation field:

  {http://www.endeca.com/MDEX/config/services/config/3}Config#ConfigPort#DoConfigTransaction
  

  Notice that this string includes a namespace target for the Web service that faithfully reflects the major Web service as version / 3 in this example (you must have this web service as version 3.0 too, but please check what version of the WS Config you use.) In the Installation Guide for server short 7.6.1 you can see how to check it: list of Web Services of short and their versions

  I hope this helps!

  Julia

• How can I produce inside the trim marks in Indesign CC?

  How can I produce inside the trim marks in Indesign CC. When a printer large format output a large image and then need to cut to size, inside trim marks are necessary. Normal trim/Cup brands get cut after the first cut.

  [Left the forum Cloud/Installer generic for program specific forum... MOD]

  To use the script, you need to draw a rectangle that is larger than the page, select the rectangle and run the script "CropMarks.jsx" of sample/JavaScript by the Committee of Scripts scripts:

  Front (showing the upper-left corner of the page; the assistance rectangle obscures the edges of the page):

  

  After (the rectangle of assistance removed after running the script):

  

  Uwe

• How can I activate the software?

  I installed the Adobe Creative Suite 6 and the Web Developer software on my computer.  The product is registered with Adobe.  And now I want to activate the product.  You please tell me how to proceed?  Thank you.

  Not necessary. It happens automatically after installation. Do you have any errors related to activation after installation?

  Thank you

  Nikhil

• How to activate the link of the certificate

  Hi friends,
  
  I'm new to IOM. I went through certification documents.
  To activate the certificate link in admin console, we need run the sql script.
  I have not found it in my installation of IOM or Web files.
  
  Can u please help me...
  
  Thank you
  Anil

  Hello

  There is another step to load the metadata related to the XACM. Here are the steps that I took of the doc.

  Loading of metadata in the database
  To load the metadata in the database, you must first make the necessary changes in one of the following files:

  Note:

  Run the script on the computer on which Oracle Identity Manager is installed with the changes mentioned below.
  LoadXML_XACM.bat

  This file is located in the OIM9101\OIM9101\installServer\Xellerate\db\Metadata directory.

  To load the metadata in the database:
  Note:

  You must run the script on the host of Oracle Identity Manager.

  Open the LoadXML_XACM script in a text editor.

  The value of the variable JAVA_HOME.

  Run by using the command prompt with the following parameters:

  JDBC URL. For example: jdbc:oracle:thin:@DB_HOST_IP:PORT:SID (replace DB_HOST_IP with the IP address of the host of the database, the PORT with the number in port of the database host and SID with the database user ID)

  -Database username

  -Password

  Concerning
  Shashidhar

• How to activate the application scope on JMX instrumentation?

  Hi gurus,
  
  I have a WLS 10.3 instance that contains a J2EE Application deployed. The deployed application doesn't have any diagnostic WLDF / instrumentation module; If the server scope instrumentation is always enabled. I would like to know if its possible to configure the scope application instrumentation on JMX remotely (via scripts).
  
  I pass the documentation here (http://edocs.bea.com/wls/docs103/wldf_configuring/config_instrumentation.html#wp1091215). I would be grateful if someone can clarify my questions:
  
  My requirement is that I have some problems in my production server performance; who has failed a switchable hot. In this case, it would be possible to activate the scope application JMX remote instrumentation, without requiring a redeployment of the application? I understand that WLDF uses AspectJ. If this is the case, why should a redeployment of the application from the console?
  
  If the transfer is necessary, what are steps (activation / deactivation) which can be made thereafter without further redeployment?
  
  
  Kind regards

  It's true, the activities supported the spread of HTTP. However, I do not know if it would work in a wlclient.jar environment, however, as I don't think there are hooks in the implementation of HTTP to the transport of the side client that would trigger a spread of work area. I'll have to look into the issue to determine if this is true or not.

  In the case of RMI/IIOP for a big customer of WebLogic (one that uses weblogic.jar), it uses the implementation of WLS, where we have control over the transport layer and can allow the spread of activities.

  Mode of spread of HTTP has been envisaged in WLDF in its original version (9.0), but concern over the impact on the spread of WLS of MIME performance. However, others have asked for this feature, and we are to reconsider allowing it in a future release.