Activating/Deactivating the ATR records the value does not

Similar Questions

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• You cannot be activated because the iPad does not connect to the server

  You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

  What is the wording accurate and complete error message?

  If she says the activation server cannot be reached/contacted

  There are 4 possible causes for this error message:

  1] activation server is actually down. Very rare and of short duration when it

  Sometimes. Solution - try again.

  [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

  temporarily disable your firewall and/or antivirus software, up to the end of the activation.

  [3] computer used for activation has been used to jailbreak an iOS device in the past.

  Solution - use another computer.

  [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

  the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

  prohibited.

• php redirection based on the value does not?

  Hello, I have a registration page, a login, failed.php and one page landing page once they have signed.

  the user registers (application - formP1.php) then once they did that they would be redirected to the next page (request - formP2.php) they then add other information.

  There is a redirect on request - formP1.php this case, the user has finished with the page (completed) they are directed to the application - formP2.php

  If ($status is "P1complete")

  {

  Header ("location: application - formP2.php");

  }

  the trouble I have is that if I just tried to access applications - formP1.php (which is the registration page) it is automatically sending the user to demand - formP2.php even if they are not signed, then because they are not signed it sends the user to the page failed (obiously because the user of retstrict does not work)

  I have included the code below for application - formP1.php

  If ((isset($_POST["MM_insert"])) & & ($_POST ["MM_insert"] == "form1")) {}

  $insertSQL = sprintf ("VALUES INSERT INTO LettingsTenApp (tenID, progress, tenTitle, tenUsername, tenPassword, tenSex, tenEmail, tenDobDD, tenDobMM, tenDobYY, tenDepend, tenMarital, tenPrevSurn, tenEmployTyp, tenNINumber) (%s %s %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s)',

  GetSQLValueString ($_POST ['tenID'], "int").

  GetSQLValueString ($_POST ['progress'], "text").

  GetSQLValueString ($_POST ['tenTitle'], "text").

  GetSQLValueString ($_POST ['tenUsername'], "text").

  GetSQLValueString ($_POST ['tenPassword'], "text").

  GetSQLValueString ($_POST ['tenSex'], "text").

  GetSQLValueString ($_POST ['tenEmail'], "text").

  GetSQLValueString ($_POST ['tenDobDD'], "text").

  GetSQLValueString ($_POST ['tenDobMM'], "text").

  GetSQLValueString ($_POST ['tenDobYY'], "text").

  GetSQLValueString ($_POST ['tenDepend'], "text").

  GetSQLValueString ($_POST ['tenMarital'], "text").

  GetSQLValueString ($_POST ['tenPrevSurn'], "text").

  GetSQLValueString ($_POST ['tenEmployTyp'], "text").

  GetSQLValueString ($_POST ['tenNINumber'], "text"));

  @mysql_select_db ($database_Letting, $Letting);

  $Result1 = mysql_query ($insertSQL, $Letting) or die (mysql_error ());

  $insertGoTo = "app - formP2.php";

  If (isset {}

  $insertGoTo. = (strpos ($insertGoTo, '?'))? « & » : « ? » ;

  $insertGoTo. = $_SERVER ['QUERY_STRING'];

  }

  header (sprintf ("location: %s", $insertGoTo));

  }

  @mysql_select_db ($database_Letting, $Letting);

  $query_rsTenant = "SELECT * FROM LettingsTenApp";

  $rsTenant = mysql_query ($query_rsTenant, $Letting) or die (mysql_error ());

  $row_rsTenant = mysql_fetch_assoc ($rsTenant);

  $totalRows_rsTenant = mysql_num_rows ($rsTenant);

  $status = $row_rsTenant ['progress'];

  Redirect the user if their application is completed

  If ($status is "P1complete")

  {

  Header ("location: application - formP2.php");

  }

  and shape

  < do action = "<?" PHP echo $editFormAction;? ">" method = "post" name = "form1" >

  < input type = "submit" value = "Save & amp; Continue"/ >

  < input type = "hidden" name = "progress" value = "P1complete" / >

  < input type = "hidden" name = "MM_insert" value = "form1" / >

  < / make >

  Thank you

  > or is it not the workflow. ?

  This is useful, but it is not yet clear what makes a large part of your code.  So when the user logs in, they were redirected to the script that you have placed in us? Do you have an online version, where you can see the workflow?

  Your script must then use the user connection in the select SQL.  This may be the variable session or the posted username form field.

  If it still does not work, then you should test the value of the session variable or the values posted

  echo $_SESSION ['MM_Username"]

  or

  echo $_POST ['tenID']

  But your code is a mess. Your form fields do not match your PHP. For example, you show us:

  but test it to the ground to help

  If (isset($_POST['tenID'])) {}

• Do not commit if the value does not exist in LOV

  Dear friends,
  
  Here is my requirement (which seems very difficult),
  
  I have a creation page where there is an article like message entry LOV, the ideal scenario is to select the value of
  lov and save the data. But if the user manually enters data that does not exist in LOV and try to save it
  I want to throw an exception.
  
  How to accomplish this task? Please suggest me.
  
  Thanks in advance,
  Had

  Hello

  user1140193 wrote:
  Here is my requirement (which seems very difficult),
  I have a creation page where there is an article like message entry LOV, the ideal scenario is to select the value of
  lov and save the data. But if the user manually enters data that does not exist in LOV and try to save it
  I want to throw an exception.

  How to accomplish this task? Please suggest me.

  -Create an article:

  Name: HiddenFv
  Style: FormValue

  -Timely lov u lovmapping to see right here, you can...
  -Right click on lovmapping and create a lovmapping more... set the properties:

  LovRegion point: Empnum
  Return: HiddenFv

  After these implemented that run the page, it will be automatically throws the exception if the user enters an invalid value.

  Concerning
  Meher Irk

• The difficulty to activate Adobe Acrobat 7.0 Standard after installed Windows 10 cleaning. Online and the activation of the phone does not work. Please advise! Thank you!

  Please let me know what are my options.

  Thank you!

  Daniel

  Hi Daniel,.

  Please visit the following link to solve this problem: https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml

  However, I believe that Acrobat 7 is not compatible with windows 10.

  Kind regards
  Rahul

• inDesign activation after the trial does not

  My trial expired inDesign, so I bought a month. But I always tells me that my trial expired and enter a serial number to activate. I was not given a serial number that I know. Can you please tell me if I should have one, my understanding was that I didn't need a cloud... Thank you.

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• Select in 1 table only if a value does not exist

  Hi all
  I have problems, develop a single select statement to accomplish a single return value. I tried variations of DECODE and COALESCE, but it eludes me.
  
  I have two tables which are as follows:
  
  NAME
  ID FULLNAME
  1, senior officer
  Junior 2,
  3, Mister
  4, Senor
  5, Miss
  
  ABBREVIATION
  ID, ABBR.
  1, Sr
  2, jr
  3, M.
  5, ms
  
  What I want to do is choose from the table NAME only if that the value does not exist in the ABBREVIATION table.
  Ideally if I were to do something like:
  
  SELECT * FROM... WHERE (ID = 1 or ID = 2 or ID = 4)...
  
  I would get the following output:
  
  1, Sr
  2, jr
  4, Senor
  
  Thanks for reading!

  You want an outer join.

  SELECT decode(a.abbrev, NULL, n.fullname, a.abbrev)
  FROM name n,
  abbreviation a
  WHERE n.ID = a.ID(+)
    AND ....
  

  Something like that.

  Complete example:

  with n as (
  select 1 as ID, 'Senior' as FULLNAME from dual UNION ALL
  select 2 as ID, 'Junior' as FULLNAME from dual UNION ALL
  select 3 as ID, 'Mister' as FULLNAME from dual UNION ALL
  select 4 as ID, 'Senor' as FULLNAME from dual UNION ALL
  select 5 as ID, 'Miss' as FULLNAME from dual),
  a as (
  select 1 as ID, 'Sr' as ABBREV from dual UNION ALL
  select 2 as ID, 'Jr' as ABBREV from dual UNION ALL
  select 3 as ID, 'Mr' as ABBREV from dual UNION ALL
  select 5 as ID, 'Ms' as ABBREV from dual)
  select decode(a.abbrev, NULL, n.fullname, a.abbrev)
  from a, n
  where n.id = a.id(+)
  order by n.id;
  
  ID                     DECODE(A.ABBREV,NULL,N.FULLNAME,A.ABBREV)
  ---------------------- -----------------------------------------
  1                      Sr
  2                      Jr
  3                      Mr
  4                      Senor
  5                      Ms                                        
  
  5 rows selected
  

  Published by: tk-7381344, November 17, 2008 13:31

• When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

  When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

  Example of

  Stair machine 550 K/CAL

  Apple Watch 30 k/cal

  Hello

  During a workout on the upstairs computer, record your activity using the app to drive on your watch, choose the stairs like the type of activity no. This allows your watch to use sensors and the data most appropriate to evaluate the results of your activity (including your heart rate, which is measured continuously during the training, when the training app using).

  More information: use of the application of the workout on your Apple Watch - Apple Support

• Flag value does not change after the SCD TYPE1 column update

  Hello

  I had scd type3, type2 successfully.

  I'm trying to implement the type 1 scd.

  For this, I change slow dimension & ckm oracle the oracle select ikm.

  the source and target tables are the following. for the type 1 scd, I chose scd behavior as existing lines updated on behalf of the emp, sal columns.

  Start timestamp to join date and the current flag to flag column.

  first ename is smith when empno is 7369.

  I've updated ename

  Update scdtype1_source set ENAME = 'AA' where EMPNO = 7369

  After running, I don't have to change the flag o to 1 in the target table.

  SCD type1 mainly used for replaces old values., but I add flag column in the target table for easy identification. () column in which I updated)

  I have not any change in the flag.

  Please help me,

  Thnaks in advance,

  A.Kavya

  

  Hello

  I'm not sure what you're trying to do will work. In the case of Type 1 SCD are you still using the dimension of change slow ikm oracle? The flag is updated to 0 in the case of CDs because of the code in step 2 "' Historize old rows where CPCs flag is set to '0'.» In your case, that no new record is added in the case of an update so the IKM does not change the flag.

  I'm not sure of your requirement either. You say you want to identify the column in which you have updated. How is an indicator will tell you what the column value has been changed? Maybe you want to know which line you have updated? If this is the case and lets say you set the flag to 1 in case of update what happens when another updated same record?

  I would suggest you add an updated time stamp column to your table and set of sysdate but in properties check only the update and will not insert. What that would do is update your record, it will fill the current date and time so that you can identify that this record has been updated.

  If you want to always go for the flag, then follow the same approach but in your mapping, change the value of the flag to 1 instead of 0 and new check only the update box (uncheck the box insert). In your create table statement the default value of this option to 0. So when the new line is inserted database is automatically assigned the flag to 0 and where there is an update, ODI it will change to 1.

  Thank you

  Ajay

• Activating/Deactivating the sound (Cap 9)?

  Hello

  I know sound can be turned off once in the settings, but I would like an advanced version of action/javascript for it.

  For the moment, I have a square, which is located below a tick, and I love it when the tick is pressed, it hides (I already do) and disables clicks. Then, when you click on the empty box, tick watch once again (I already do) and turns the nattering turn it back on.

  http://i.imgur.com/jkdvvzW.PNG

  If you know all the methods that allow me to do this several times in the project with only these two objects, please teach me.

  Thank you in advance.

  You can only cut all sound equity advances/shared, not just clicks. Muting happens by activating / deactivating the system variable cpCmndMute, which is a Boolean value.

  I blogged about common actions for toggle buttons: 1 share = 5 buttons toggle - Captivate blog

  You can use this action and add the command to hide/show the tick. I don't know how you realize right now: hide/show or States?

• I have a HTML5 form that sends a null (%) if the user does not have a choice. It works fine, but I get an error of W3c on the value of '% '. Is there another way to send a NULL value?

  I have an HTML5 form that allows the user to select 1 of 6 provinces of Costa Rica. If they do not select a Province, I use php code to send a NULL value and the other selections research of the form looking for all Provinces. If they choose a province, we are looking for database records that are found in this province.  Currently I use the value = '%' as the selected value if the user does not have a choice. It works and looks in all provinces, but I get an error of W3c checking on the value = '% '. Y at - it another way to send a NULL value. PS: I have the same problem on the following form which allows you to select the Business category. The page is http://www.yellowpagescr.com

  Here is a copy of the code. The RED line works but gets a W3c issue error of the test page. :

  < form = class "navbar-form Center navigation bar" role = "Search" action = "#searchresults" method = "get" name = "selectterms" id = "selectterms" title = "" >

  < select name = "province" autofocus class = 'copyright' title = "Click to select a Province (optional)" >

  < option value = '%' selected = "selected" > all Provinces < / option >

  < option value = "alajuela" > Alajuela < / option >

  < option value = "cartago" > Cartago < / option >

  < option value = "Guanacaste" selected > Guanacaste < / option >

  < option value = "heredia" > Heredia < / option >

  < option value = "Limon" > Limon < / option >

  < option value = "Puntarenas" > Puntarenas < / option >

  < option value = "San Jose" > San Jose < / option >

  < option value = "Other" > other < / option >

  < / select >

  The correct way.

  " value =" " " selected disabled> - optional Province.

  Nancy O.

• my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• Re: DVD recorder has changed and the laptop does not recognize

  I had to change my Toshiba Qosmio F20 portable recorder.
  Now, the computer does not recognize.

  I installed a DVD burner Sony Optiarc AD - 7590 IDE.
  I heard that the problem may be in the BIOS, I have the latest TOSHIBA for this laptop (which is installed V.1.40 2007) and the recorder comes with the manufacturing date of 2009.

  I currently use Windows 7 on this computer.
  Is it only possible for the computer recognizes it, "any driver or driver I install?

  Hello

  Talking about this laptop doesn't recognize, do you mean on the Bios or Device Manager or both?

• Reset the default value does not

  'Reset to the default value' does not work for my ListBox multicolumn, but it works for my string flags.  Someone at - he never encountered this before?

  I tried to remove all the elements and setting "default value to', but after another execution of the program, still not reset to nothing.  I have to do it programmatically in my code, and I can't do using the server reference VI Reset at the same time.  I have to define arrays of strings individually to null.

  I use a large number of nodes of property in my loop of consumer to read/write the values in the front panel.  Not sure if this is related.

  Thank you.

  This occurs because the value of a multicolumn listbox is a digital scalar or table (depending on the selection mode of the control) Express which line or the currently selected cell.

  "Reset to default" only resets the values and no other properties. In this case, it is the property of ref that hosts that we consider intuitively the value of listbox mc, but it's not.