Activation bluetooth under xp.

Similar Questions

• Satellite A665 - 13W WIFI slow when activated Bluetooth

  I have hit a problem with WIFI performance and need help to find the solution.

  I have Satellite A665-13W with wireless Broadcom 802.11n network adapter and use the latest BIOS and drivers (for Broadcom is version 5.60.48.35). The laptop connects to my router and can reach network high speed, but then long time ago when there is no flow of data over network connections. These shortcomings last several seconds and occure probably 3 times per minute. This makes services like Skype unusable because for a while, I have good network connection, allowing you to make a video call even but quality then connection drops less than 1 Mbps (in fact hold) so even audio is not working and call either disconnects or connection back to full speed for about 10 seconds until what the quality decreases again.

  I tried different routers (802. 11 g, and 802.11n) and the problem persists. I tried to measure the performance of data transfer on LAN and found that the problem is not only related to my internet connection. I have tried other laptops and their connection works fine, so the problem lies in the Satellite A665-13W and its wireless adapter. In the end, I found that the problem is related to activated Bluetooth which is necessary for the connection of a wireless mouse.

  If bluetooth is disabled the WIFI performance is good and there is no delay in the transfer of data.
  If bluetooth is enabled (but no bluetooth device is connected or prominent) WIFI performance is severely degraded. Performance degradation is some expected when Bluetooth is used, but what is not acceptable, it is that no data shall not be transferred for a period of several seconds and even in the case where no bluetooth device is actually connected.

  My other laptop (Asus, Lenovo) do not have such a problem and can transfer data via WIFI streaming even if the Bluetooth mouse is connected to them and used. So it's clear the Toshiba laptop to malfunction.

  I tried to deactivate the energy saving network adapter wireless, but with no impact on performance.

  Is there a newer driver that can solve the problem? I can't solve the problem of some network card settings? Network card can be replaced to solve the problem (for laptop is under warranty)?

  Thanks in advance for any help.

  Best regards
  Jakub

  Hello

  > Is there a newer driver that can solve the problem?
  Well, I can't say with certainty if the driver update should solve your problem, but I think that it s worth a try. You should try to update the driver WLAN and Bluetooth. You can find updates on the following pages:
  http://APS2.toshiba-tro.de/Bluetooth/
  http://APS2.toshiba-tro.de/WLAN/

  Also define the power WLAN mode for each profile of saving power for maximum performance which is not power save.

  Using the version preinstalled Windows from Toshiba or your own installation? If you use your own test of Windows with factory settings please. Just to make sure that it s not to deliver any software.

  Not least have last but you installed a software/driver for this Bluetooth mouse?

• HP Pavilion dv5-2135dx: get active bluetooth / work?

  I operate bluetooth. but it seems that I hit dead ends and nothing done yet to get bluetooth working on windows 64-bit 10.

  I tried the two drivers of bluetooth of the page of the official product of the hp driver "sp50180" & "sp52533".

  driver page - http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-dv5-2100-Entertainment-Notebook-PC-serie...

  I tried running both in compatibility mode for xp sp3 and windows 7 without success, they did not

  "sp52533" generates the error "bluetooth hardware must be put on run this installation package ' but the thing is that I have yet to see/find bluetooth under devices so I can enable it

  'sp50180' outputs error "this application cannot run on this pc" as I have said - I tried compatibility mode for xp sp3 and windows 7. It doesn't work anymore

  under c:\SWSetup\SP50180 there is 'Inst.exe' and 'BTW.msi '.

  the two let me install the driver/software but it does not work, I still have not found bluetooth under > devices in the settings even after install/install these

  would be very grateful of the solution/fix/workaround to resolve what to get my bluetooth for windows 64-bit 10.

  I don't want to go back to windows 7 just to get the work of bluetooth. I just want to use my bluetooth with my laptop speakers.

  Hello:

  According to the page of specifications of product for your laptop, it doesn't come with built in bluetooth network.

  http://support.HP.com/us-en/product/HP-Pavilion-dv5-2100-entertainment-notebook-PC-series/4210545/model/4317148/document/c02474306/

  If so, this feature would have been listed as well as WLAN 802.11b/g/n wireless connectivity specifications.

  Then I looked to the top of the model wireless network card that your laptop is in the parts list...

  http://PartSurfer.HP.com/search.aspx?SearchText=XH004UA

  It does not list a separate bluetooth module and adapter WiFi Atheros AR9285 802.11 b/g/n (1 x 1) (more people) it is the map that you see listed under the category of peripheral cards Network Manager, if not an adapter without wireless/bluetooth combination.

  So I would say that you get the message "bluetooth hardware must be on" because there is a total absence of the bluetooth hardware, which, according to all that I have written, makes sense as to why you can not bluetooth works.

• No Bluetooth under XP on Satellite Pro A200 - 1 MI

  And I finally have everything solve but under XP, there is no Bluetooth? Someone help me!

  I don't know if this will help but ConfigFree tool you should be able to toggle the BT module.

  Have you installed last http://aps.toshiba-tro.de/bluetooth/ BT stack?

• How to activate java active scripting under windows xp? cannot play pogo

  cannot enablke java active scripting in the settings.

  Hi jayne,.

  ·         What browser do you use?

  ·         What is you receive the exact error message?

  If you use Internet Explorer, you can follow these steps and check if it helps.

  a. type the following command in the start menu > run box, and then press ENTER:

  Inetcpl.cpl

  The Internet Options dialog box appears.

  b. click on the Security tab, and then select custom level.

  c. scroll down the list of options until you spotted Scripting. Click on 'Enable' under 'Active Scripting'.

  d. scroll down the list of options until you spotted Scripting. Click on 'Enable' under "Scripting of Java applets."

  For more information please visit this link: How to enable the script in your browser

  Hope the helps of information.

  Please post back and we do know.

• Activation BlueTooth Radio - not appearing is not in the FnF5 screen

  When I hit the button to FnF5, I get only the Wireless LAN Radio option and not the BlueTooth. What should I do or check to activate my Bluetooth radio? When I got my new laptop radio was by default and work. Since then I have turned off many off options for services I don't use and could have turned off Bluetooth accidentally. When I reboot, I see the Bluetooth LED turns on for a split second at the beginning and then turns off the coast as the laptop starts.

  I see too the Bluetooth adapter on my Device Manager list. If everything worked normally under what heading the map should be listed?

  Thanks in advance for any help.

  Look in the access of security-I/O port of BIOs

• Check if there is an active bluetooth connection.

  Hi, I am writing currecntly an application is a kind of bluetooth Manager. I want to add a function that checks if the device is connected to another device. as

  {if (active Connection)}

  Label.Text = you have an active connection

  }

  I have raked by the waterfalls and the basic documentation and can't find anything even outside the box. I was

  wandering if theres anyone that could help me.

  Thank you.

  something like this should help you

      bt_remote_device_t **remote_device_array;
      bt_remote_device_t *next_remote_device = 0;
  
      remote_device_array = bt_disc_retrieve_devices(BT_DISCOVERY_CONNECTED, 0);
      if (remote_device_array) {
          for (int i = 0; (next_remote_device = remote_device_array[i]); ++i) {
              QVariantMap map;
              QString remoteDeviceName;
              QString remoteDeviceAddress;
              int remoteDeviceClass;
              char buffer[128];
              const int bufferSize = sizeof(buffer);
  
              bt_rdev_get_friendly_name(next_remote_device, buffer, bufferSize);
              remoteDeviceName = QString::fromLatin1(buffer);
              map.insert("deviceName", remoteDeviceName);
              bt_rdev_get_address(next_remote_device, buffer);
              remoteDeviceAddress = QString::fromLatin1(buffer);
              map.insert("deviceAddress", remoteDeviceAddress);
              remoteDeviceClass = bt_rdev_get_device_class(next_remote_device, BT_COD_DEVICECLASS);
              map.insert("deviceClass", remoteDeviceClass);
              // do what you want - I'm adding to a QVariantList mPaired.append(map);
          }
      } // end remote_device_array
  

  Take a look at Blootooth samples of waterfalls at Github

  I'm just a workshop for the client, so no time to help the next days

  xxx

• How can I keep my Active parent menu when the activation of underlying submenu items?

  Using the submenu, how would manipulate the behavior of the tab menu parent active (active state)? For example, the parent menu = portfolio, submenu consists of 2 items, photographs and drawings. When you click on one of these tabs, the parent (portfolio) tab turns into idle even if submenu pages are built under the porfolio parent page... anyone? Thank you

  I'm not sure if I understand you right, but if you use a 'normal' menu, it should work exactly as you wish. Just look at this site: www.q-stables.de

• Re: Satellite A200 (PSAE3E) activation Bluetooth cause BSOD using Win 7 64 bit

  Heallo,

  I have a problem with Bluetooth in Satellite A200 (PSAE3E).
  My OS is Profwessional in Win7 64 bit.

  When I install a pilot system BT did everything correctly, then by restarting (after inviting).
  When the WiFi and BT switch is off, everything is ok but after turning a wireless connection with this switch after fiew second computer shows dump and does not work... Restert help until the next turn on the switch on the front panel.

  What's wrong? I am trying to install the drivers, unistalling everything and install...

  Thank you very much for the help.
  Jan

  Hello

  Have Hmm you tried reinstalling the BT stack once more?
  How about Wlan driver update? Have you tried that too?
  If this isn't it.

  Here you will find the BT and Wlan Toshiba Europe page Portal Portal:
  http://APS2.toshiba-tro.de/WLAN/
  http://APS2.toshiba-tro.de/Bluetooth/

• Activation bluetooth on Toshiba Satellite laptop?

  How to activate bluetooth on Toshiba Satellite A505 S6980 laptop?

  Hello

  I'm happy to have helped.

  Navigate to the file in Start - computer or Windows Explorer - click right on the
  file - rename (make sure it isn't already a Bth.inf file in this folder - it should be)
  .inf and not .info).

  Show or hide file name extensions
  http://Windows.Microsoft.com/en-us/Windows7/show-or-hide-file-name-extensions

  Rename a file.
  http://Windows.Microsoft.com/en-us/Windows7/rename-a-file

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot find Bluetooth under Windows 7 settings

  Bluetooth icon was present in the bar of tasks and somehow, he's not here now, and I couldn't access the Bluetooth settings or even find it.

  Hi man,

  1. is Bluetooth works fine?

  Follow the following troubleshooting methods:

  Method: 1

  Follow the steps below to turn this icon on the system tray.

  a. click the Start button.

  b. Select Control Panel from the menu.

  c. choose to view the control panel in Classic view (in the left pane).

  d. Double click on the Bluetooth icon.

  e. click on the tab options in the upper part.

  f. then put a checkmark in the box next to the Bluetooth icon to display in the notification area.

  Method: 2

  See the following link to change Bluetooth settings.

  Change settings for a Bluetooth compatible device

  Method: 3

  Also, you can run the troubleshooter of Bluetooth to solve several problems of Bluetooth.

  The problems with Bluetooth devices

• Help! No active Bluetooth and does not as it is accessible to all...

  I'm totally confused, I bought a T500 not so long ago, but I can't bring up the control panel bluetooth at all!   My laptop spec says on the order form:

  62P 6054 VBB INTEGR. BLUETOOTH PAN

  It's a 64 bit version of Windows 7... and nada.  When I click on the Start button and type bluetooth, blue Bluetooth control panel happens but it absolutely nothing happens when I click it.  I tried to do a right click on it and it works like an administrator but no dice.

  Any ideas?  Thanks in advance a ton!

  Hi ricochet, Fn + F5 should show your Bluetooth card. Is it turned on?

• Activation/activation Bluetooth on latitude e4300

  Hello

  l is impossible to turn on my bluetooth on my computer laptop e4300. If I search in the help, it is said to go in Bluetooth devices in Control Panel, but that does not exist! Maybe I need to push a button or something on my laptop current to activate bluetooth?

  Thank you

  Caroline

  Downloading the software wireless 365 Bluetooth A04 2 R247521. But at the end of the installation, a screen "Activate Bluetooth using the wireless switch."

  How it should be done on a Latitude e4300 laptop? Toggle the switch wireless on the laptop is having no effect.

• Bluetooth not working not not iPad IOS Version 9.3.1 Air

  The bluetooth on my iPad Air has stopped working. Not sure when it stopped. I tried to combine the following: Fitbit Charge HR, iGrill Mini-CE28, BlueDrive 2.31 - 2AD5. All have failed. Bluetooth under settings with shows not all devices available for matching. I tried a soft reset and activated bluetooth on and outside, without success. Is there a solution for this problem?

  Hello

  Just Bluetooth on & device to pair & leave to pair my bose soundlink took 10 minutes to match the first time.

  Now he pairs immediately.

  Just leave them to the pair for up to 15 minutes.

  See you soon

  Brian

• Intel, Bluetooth (N 2230) disappeared after upgrade Win8

  Hi all

  I own and DV6 7078 ca (6 months warranty) equipped with Intel Centrino Wireless - N 2230.

  With Win7, I used the bluetooth without any problem and there was a device in the Device Manager with a name similar to "Intel Bluetooth" under network adapters.

  After the upgrade of Win8 I already installed all the drivers, but does not have the Bluetooth It.

  > There is no component in my device manager asking drivers. everything has been recognized.

  > Under network adapters, there are 3 entrances, but my bluetooth is not there. What I have listed in this category is:

  -Intel Centrino Wireless-N 2230

  -Microsoft Kernel Debug network adapter

  -Realtek PCIe BGE family control.

  I tried to download drivers bluetooth drivers HP my laptop and also direct from Intel page.

  My bluetooth is still dead...

  Help, please.

  Thank you

  When my bluetooth was working on Windows7 I used to activate only when it was necessary. When I tried to plug in devices. So when I installed Win8 it was disabled on HP Connection Manager in Win7.

  I have reinstaled Win7, the related bluetooth drivers and then HP Connection Manager. Enabled the bluetooth in Win7 on HP Connection Manager, worked. Then I went back to Win8 and bluetooth appeared. Now it's working.

  I only wish that person HP spoke about this problem. That there is no document saying that the bluetooth needs to be activated in Windows7 throught HP Connection Manager prior to reimage the computer...

  In Win7 HP connection manager disable the bluetooth in a level of material than Win8 can't same identidy there will always be a bluetooth adapter it.