Activation/activation Bluetooth on latitude e4300

Similar Questions

• Satellite A665 - 13W WIFI slow when activated Bluetooth

  I have hit a problem with WIFI performance and need help to find the solution.

  I have Satellite A665-13W with wireless Broadcom 802.11n network adapter and use the latest BIOS and drivers (for Broadcom is version 5.60.48.35). The laptop connects to my router and can reach network high speed, but then long time ago when there is no flow of data over network connections. These shortcomings last several seconds and occure probably 3 times per minute. This makes services like Skype unusable because for a while, I have good network connection, allowing you to make a video call even but quality then connection drops less than 1 Mbps (in fact hold) so even audio is not working and call either disconnects or connection back to full speed for about 10 seconds until what the quality decreases again.

  I tried different routers (802. 11 g, and 802.11n) and the problem persists. I tried to measure the performance of data transfer on LAN and found that the problem is not only related to my internet connection. I have tried other laptops and their connection works fine, so the problem lies in the Satellite A665-13W and its wireless adapter. In the end, I found that the problem is related to activated Bluetooth which is necessary for the connection of a wireless mouse.

  If bluetooth is disabled the WIFI performance is good and there is no delay in the transfer of data.
  If bluetooth is enabled (but no bluetooth device is connected or prominent) WIFI performance is severely degraded. Performance degradation is some expected when Bluetooth is used, but what is not acceptable, it is that no data shall not be transferred for a period of several seconds and even in the case where no bluetooth device is actually connected.

  My other laptop (Asus, Lenovo) do not have such a problem and can transfer data via WIFI streaming even if the Bluetooth mouse is connected to them and used. So it's clear the Toshiba laptop to malfunction.

  I tried to deactivate the energy saving network adapter wireless, but with no impact on performance.

  Is there a newer driver that can solve the problem? I can't solve the problem of some network card settings? Network card can be replaced to solve the problem (for laptop is under warranty)?

  Thanks in advance for any help.

  Best regards
  Jakub

  Hello

  > Is there a newer driver that can solve the problem?
  Well, I can't say with certainty if the driver update should solve your problem, but I think that it s worth a try. You should try to update the driver WLAN and Bluetooth. You can find updates on the following pages:
  http://APS2.toshiba-tro.de/Bluetooth/
  http://APS2.toshiba-tro.de/WLAN/

  Also define the power WLAN mode for each profile of saving power for maximum performance which is not power save.

  Using the version preinstalled Windows from Toshiba or your own installation? If you use your own test of Windows with factory settings please. Just to make sure that it s not to deliver any software.

  Not least have last but you installed a software/driver for this Bluetooth mouse?

• How can I find a manual for a Dell Latitude E4300. I'm looking for more information on how to control the F keys on my computer.

  Where is a Dell latitude E4300 manual or manual in Windows Vista that can tell me how to turn on or off the F keys.  At the moment I get a few totally different symbols than usual.

  original title: activation or deactivation of the F keys

  Manuals are available from the

  http://support.Dell.com/support/eDOCS/systems/late4300/en/index.htm

• dell latitude e4300 wireless problem

  HELO I have dell latitude e4300, and when his power on his wifi is off, but after doing some work on my pc and make the pc to sleep and again in normal mode wifi starts to operate. kindly help me.

  Hello zitouni,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any recent hardware or software on your computer changes?

  Thank you for details on the issue.

  This problem can occur for the following reasons:

  -Wireless adapter switch is not activated.
  -WEP, WPA or WPA2 key or password security issues.
  -Cables are not connected properly.
  -Corrupted or incompatible wireless network drivers.
  -Missing updates.
  -Incorrect wireless network connection settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Latitude e4300 overheating

  Hi, I have a new latitude e4300, witch overheating up to 70 c - mainly CPU. I called support and they relpaced the driver of heat and the fan, but the tempetures still increase.

  the model is equipped with sp9600, 200 GB HDD at 7200 RPM, 2048 MB of memory.

  What are the causes it overheats so much? and what are normal for this computere temperature, since it is a small with a powerful processor?

  Thank you

  Hello

  I changed all of the assembly (fan and heatpipe), with no major change in temp (difference of-3 degrees). Now I use CPUGenie application (not sold anymore), which can lower my CPU voltage.
  Currently, the maximum temperature at the I could do, was 81 degrees c, after 30 min with CPUBurn.

  I have not found any other solution. And believe me, I've tried everything:

  -Mail to Dell
  -Phone calls to Dell
  -Updates and downgrade the BIOS
  -Changed all the cooling system

  I recommend that you do a search for CPUGenie request and give it a try.
  You have nothing to lose. No decrease in performance. Only more down time.

  All the best,

  Stefan Szasz

• Check if there is an active bluetooth connection.

  Hi, I am writing currecntly an application is a kind of bluetooth Manager. I want to add a function that checks if the device is connected to another device. as

  {if (active Connection)}

  Label.Text = you have an active connection

  }

  I have raked by the waterfalls and the basic documentation and can't find anything even outside the box. I was

  wandering if theres anyone that could help me.

  Thank you.

  something like this should help you

      bt_remote_device_t **remote_device_array;
      bt_remote_device_t *next_remote_device = 0;
  
      remote_device_array = bt_disc_retrieve_devices(BT_DISCOVERY_CONNECTED, 0);
      if (remote_device_array) {
          for (int i = 0; (next_remote_device = remote_device_array[i]); ++i) {
              QVariantMap map;
              QString remoteDeviceName;
              QString remoteDeviceAddress;
              int remoteDeviceClass;
              char buffer[128];
              const int bufferSize = sizeof(buffer);
  
              bt_rdev_get_friendly_name(next_remote_device, buffer, bufferSize);
              remoteDeviceName = QString::fromLatin1(buffer);
              map.insert("deviceName", remoteDeviceName);
              bt_rdev_get_address(next_remote_device, buffer);
              remoteDeviceAddress = QString::fromLatin1(buffer);
              map.insert("deviceAddress", remoteDeviceAddress);
              remoteDeviceClass = bt_rdev_get_device_class(next_remote_device, BT_COD_DEVICECLASS);
              map.insert("deviceClass", remoteDeviceClass);
              // do what you want - I'm adding to a QVariantList mPaired.append(map);
          }
      } // end remote_device_array
  

  Take a look at Blootooth samples of waterfalls at Github

  I'm just a workshop for the client, so no time to help the next days

  xxx

• Re: Satellite A200 (PSAE3E) activation Bluetooth cause BSOD using Win 7 64 bit

  Heallo,

  I have a problem with Bluetooth in Satellite A200 (PSAE3E).
  My OS is Profwessional in Win7 64 bit.

  When I install a pilot system BT did everything correctly, then by restarting (after inviting).
  When the WiFi and BT switch is off, everything is ok but after turning a wireless connection with this switch after fiew second computer shows dump and does not work... Restert help until the next turn on the switch on the front panel.

  What's wrong? I am trying to install the drivers, unistalling everything and install...

  Thank you very much for the help.
  Jan

  Hello

  Have Hmm you tried reinstalling the BT stack once more?
  How about Wlan driver update? Have you tried that too?
  If this isn't it.

  Here you will find the BT and Wlan Toshiba Europe page Portal Portal:
  http://APS2.toshiba-tro.de/WLAN/
  http://APS2.toshiba-tro.de/Bluetooth/

• HP Pavilion dv5-2135dx: get active bluetooth / work?

  I operate bluetooth. but it seems that I hit dead ends and nothing done yet to get bluetooth working on windows 64-bit 10.

  I tried the two drivers of bluetooth of the page of the official product of the hp driver "sp50180" & "sp52533".

  driver page - http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-dv5-2100-Entertainment-Notebook-PC-serie...

  I tried running both in compatibility mode for xp sp3 and windows 7 without success, they did not

  "sp52533" generates the error "bluetooth hardware must be put on run this installation package ' but the thing is that I have yet to see/find bluetooth under devices so I can enable it

  'sp50180' outputs error "this application cannot run on this pc" as I have said - I tried compatibility mode for xp sp3 and windows 7. It doesn't work anymore

  under c:\SWSetup\SP50180 there is 'Inst.exe' and 'BTW.msi '.

  the two let me install the driver/software but it does not work, I still have not found bluetooth under > devices in the settings even after install/install these

  would be very grateful of the solution/fix/workaround to resolve what to get my bluetooth for windows 64-bit 10.

  I don't want to go back to windows 7 just to get the work of bluetooth. I just want to use my bluetooth with my laptop speakers.

  Hello:

  According to the page of specifications of product for your laptop, it doesn't come with built in bluetooth network.

  http://support.HP.com/us-en/product/HP-Pavilion-dv5-2100-entertainment-notebook-PC-series/4210545/model/4317148/document/c02474306/

  If so, this feature would have been listed as well as WLAN 802.11b/g/n wireless connectivity specifications.

  Then I looked to the top of the model wireless network card that your laptop is in the parts list...

  http://PartSurfer.HP.com/search.aspx?SearchText=XH004UA

  It does not list a separate bluetooth module and adapter WiFi Atheros AR9285 802.11 b/g/n (1 x 1) (more people) it is the map that you see listed under the category of peripheral cards Network Manager, if not an adapter without wireless/bluetooth combination.

  So I would say that you get the message "bluetooth hardware must be on" because there is a total absence of the bluetooth hardware, which, according to all that I have written, makes sense as to why you can not bluetooth works.

• Activation bluetooth on Toshiba Satellite laptop?

  How to activate bluetooth on Toshiba Satellite A505 S6980 laptop?

  Hello

  I'm happy to have helped.

  Navigate to the file in Start - computer or Windows Explorer - click right on the
  file - rename (make sure it isn't already a Bth.inf file in this folder - it should be)
  .inf and not .info).

  Show or hide file name extensions
  http://Windows.Microsoft.com/en-us/Windows7/show-or-hide-file-name-extensions

  Rename a file.
  http://Windows.Microsoft.com/en-us/Windows7/rename-a-file

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Activation bluetooth under xp.

  Hello.

  I do not see the option of bluetooth devices in Control Panel and am unable to connect my phone and my pc via bluetooth. I checked on the internet, but I didn't understand any "Bluetooth adapter".
  Please help me.
  Kind regards
  Kaushik.

  Hey Kaushik,

  1. What is the brand of your computer?
  2. What is the Service Pack installed no. your XP computer?
  3. are you able to connect other bluetooth devices to your computer?

  Maybe your computer does not support bluetooth devices.

  I suggest that you follow the steps in this article and check if the problem persists.
  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

• Activation BlueTooth Radio - not appearing is not in the FnF5 screen

  When I hit the button to FnF5, I get only the Wireless LAN Radio option and not the BlueTooth. What should I do or check to activate my Bluetooth radio? When I got my new laptop radio was by default and work. Since then I have turned off many off options for services I don't use and could have turned off Bluetooth accidentally. When I reboot, I see the Bluetooth LED turns on for a split second at the beginning and then turns off the coast as the laptop starts.

  I see too the Bluetooth adapter on my Device Manager list. If everything worked normally under what heading the map should be listed?

  Thanks in advance for any help.

  Look in the access of security-I/O port of BIOs

• Help! No active Bluetooth and does not as it is accessible to all...

  I'm totally confused, I bought a T500 not so long ago, but I can't bring up the control panel bluetooth at all!   My laptop spec says on the order form:

  62P 6054 VBB INTEGR. BLUETOOTH PAN

  It's a 64 bit version of Windows 7... and nada.  When I click on the Start button and type bluetooth, blue Bluetooth control panel happens but it absolutely nothing happens when I click it.  I tried to do a right click on it and it works like an administrator but no dice.

  Any ideas?  Thanks in advance a ton!

  Hi ricochet, Fn + F5 should show your Bluetooth card. Is it turned on?

• Update device Intel 8260/7260 Bluetooth on Latitude E5540

  During the last two weeks, I get a notification update Intel 8260/7260 Bluetooth device on my Latitude E5540 to update driver from Dell (Dell update command). The update downloads ok and starts to install, then a black mini window pops up as the old window back but without display message and after a few minutes or seconds the installation stops and I get a message saying that it has failed.  This has happened about 3 - 4 times in the last 2 weeks.  Any advice as to what can be done?  Thank you.

  Thank you for your quick response.  Before I read your response, I did some reading and went to the Device Manager and check if the bluetooth device driver intel (mine is 7260) necessary for an update and got the answer that I got latest drivers.  I did, however, go to Dell as you suggested above and check the updates of device needed and this wasn't.  So I think that I agree.  I assume that the installation failed because it was already up to date, there may not be an option that tells you already have the latest version of the driver for the system.  Thanks again for the information, much appreciated.

• How to see availability and activate Bluetooth on Latitude D630

  I just bought Latitude D630 (2nd hand) but I don't know if my D630/device bluetooth have.

  How to check?

  and how to activate it?

  Thank you

  
  

• No Bluetooth on Latitude E5540 although Wifi works (Intel Dual Band AC-7260 BT + Wifi)

  Hello

  as indicated, I can't do the bluetooth on my laptop E5540, although the chip works fine (Intel Dual Band AC-7260 BT + Wifi). I do not use so much so I discovered a few days ago:

  Win7 showed an "unknown device" which was clearly referring to BT

  After a round of Microsoft/Dell/Intel updates, there is no more 'unknown devices' but still no trace of BT (as you can see in the following image).

  Help?

  Thanks in advance

  Hi Brad,

  Thanks for the tips. I have indeed tried everything and more, but no bluetooth device was visible... I finally checked the BIOS, and we are here:

  SOLVED.

  The question was in fact related to an option: "want you as the physical button on the left to control: wifi, wifi + bluetooth...» ». I probably suddenly unchecked bluetooth, there is no more way to power it on.

  Thank you