Activation of AHCI HP dv6t 3000 CTO

Similar Questions

• Pavilion dv6t-3000 CTO Ente: Pavilion dv6t-3000 CTO Entertainment Notebook PC - RAM upgrade

  Hi all

  Happy new year 2016!

  Need help on RAM upgradation for dv6t-3000 CTO Notebook PC (laptop).

  --------------------------
  My system info:
  Model: HP Pavilion dv6 Notebook PC
  Name of the operating system: Microsoft Windows 10 home
  OS version: 10.0.10586 n/a build 10586
  OS configuration: Standalone Workstation
  OS Build type: multiprocessor Free
  Processor (s): 1 processor installed.
  [01]: Intel64 family 6 model 37 Stepping 2 GenuineIntel ~ 2133 Mhz
  Intel (r) Core i3 CPU M 350 2.27 GHz
  Slot 1: 2 GB Samsung 1067 MHz MEM
  Slot 2: 2 GB Samsung 1067 MHz MEM
  Motherboard: 144 c 65,38

  Virtual memory: Max size: 7 862 MB
  Virtual memory: available: 2 319 MB
  Virtual memory: in use: 5 543 MB

  (bought in 2010 HP online shoppig)
  --------------------------

  I wanted to be the existing 2x2gb RAM upgraded to 2 x 4 GB.
  In the maintenance and the service manual (c02657339.pdf) information, following a very generic info is seen:
  -----
  Two SODIMM slots for customer-accessible/extendable
  DDR3 PC3-10600 1333 MHz memory
  Supports dual channel

  Supports up to 8 GB of memory system in the following configurations:
  Total system memory to 1024 MB (1024 MB x 1)
  Total system memory of 2048 MB (1024 MB x 2, dual-channel)
  Total system memory of 2048 MB (2048 MB x 1)
  Total system memory of 3072 MB (1024 MB x 1 + 2048 MB x 1)
  Total system memory of 4096 MB (2048 MB x 2, dual-channel)
  System memory total 6144 MB (2048 MB x 1 + 4096 MB x 1)
  Total system memory of 8192 MB (4096 MB x 2, dual-channel)
  -----

  Analysis of the essential:
  Maximum memory: 8192MB
  Recommendations of the participle did not «...» PC3-10600... ».

  -----
  I've visited the forums, recommendations are given by competent persons for purchases of RAM.

  Issues related to the:
  1 is my laptop - portable, compatible computer for the upgrade of the Rams the existing 2 x 4 GB 2x2gb?
  2. following has been recommended for a similar case in the forums (for a slightly different configuration):
  
  http://www.Newegg.com/product/product.aspx?item=N82E16820231342

  (1.5V)
  G.SKILL 8 GB (2 x 4 GB) 204-pin DDR3 SO-DIMM DDR3 1333 (PC3 10600) laptop memory model F3-10600CL9D-8GBSQ

  (Not sure if is 1, 5V for my machine)
  Can I use the same (2)... or else want to recommend pieces for 2 x 4 GB with the purchase that I don't get no exact corresponding to those. One or the other setting is different.

  Thanks in anticipation,
  Srini

  Your request has been covered in the next more old thread.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/dv6t-3000-RAM-upgrade/TD-p/2484041/page/2

• version the most recent upgrade of QuickWeb for dv6t-3000 CTO Notebook

  I need a link to get the latest version of HP quickWeb for my laptop dv6t-3000 CTO.

  Hello

  I believe that the following link is the most recent:

  FTP://ftp.HP.com/pub/SoftPaq/sp47001-47500/sp47192.exe

  or you can try:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-101938-1

  Kind regards.

• Pavilion Dv6t - 3000 CTO Select: replace the hard drive on HP Pavilion Dv6t-3000 CTO Select Edition

  My Dv6t-3000 CTO select came with a HP 160 GB SSD hard dive, part # 603673-001.  Here is the service manual for your laptop: http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf hard drive HP numbers are listed on page 65.

  I want to replace my 160 GB SSD with a larger capacity drive.  I don't like to get again the SSD.  Would this WD Black WD5000LPLX 500 GB 7200 RPM 32 MB Cache SATA 6.0 GB / s 2.5 "Internal Hard Drive drive naked of the new egg be a good and compatible choice?  It would be the same size?  Do I need additional cables to install it?  Does with Imaging for transfer of operating system software and your data?

  http://www.Newegg.com/product/product.aspx?item=N82E16822236873

  It is an excellent hard drive; one of the best mechanical laptop from readers on the market. The mounting for the SSD material will also work with the HARD drive, you don't need anything in the way of shopping cart or cables. The hard drive and SSD are the same physical size with holes in the same place. However, this product is a "naked" drive, which means that it does not come with a software or additional hardware of any kind. You also need something like this:

  http://www.Amazon.com/Apricorn-notebook-upgrade-connection-ASW-USB3-25/DP/B005C983NA/ref=sr_1_2?s=electronics&ie=UTF8&QID=1427493337&SR=1-2&keywords=hard+drive+cloning+Kit

  When you clone, choose resize "proportional". This will just make all the larger partitions in the same report. Passing a smaller on a player more large size is much easier that vice versa. Good luck.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Upgrading RAM for Pavilion dv6t - 3000 CTO Select Edition Entertainment Notebook

  Model Pavilion dv6t - 3000 CTO Select Edition, Prod #VXO69AV, Intel Core i5 - 450 M (2.4 GHz with 3 MB L3 Cache) with Turbo Boost up to 2.66 GHz, 160 GB Solid State Drive Flash Module, 1 GB ATI Mobility Radeon HD 5650 switchable graphics, Windows 7 Ultimate. I currently have the original 6 GB of ram that came on the HP laptop, which includes a stick of 4 GB and 2 GB key.

  I want to spend the maximum amount of ram and the ram for maximum performance (speed). Analysis of Crucial.com says I have 6 GB of ram and the maximum ram is 8 GB. He also says that I can buy one (or two) 4 GB DDR3 PC3-12800. CL = 11.    NON ECC unbuffered.     DDR3-1600.   1.35v. here is the link for the crucial scan and recommendations:

  http://www.crucial.com/ProductDisplay?displayCompatibleLogo=1&urlRequestType=base&catalogId=10151&PR...

  Here is a link below for my maintenance SE dv6t and Service Guide, with memory on page 70. The service guide references DDR3 PC3-10600 clocked at 1333 MHz.

  http://h10032.www1.HP.com/CTG/manual/c02657339.PDF

  Issues related to the:

  The Crucial scan seems to direct me to the memory of better and faster that is listed in the Service Guide. My laptop took advantage of this Crucial memory to operate at faster speeds than the memory, I have now? What latency (CL) cases? I saw sticks to new Egg with CL = 9 instead of this Crucial CL = 11. CL is important? What I have to buy two Crucial 4 GB sticks or I can I keep my original 4 GB stick and add a Crucial 4 GB stick for my 8GB? Is Crucial memory memory low density -something I've read elsewhere that I need? FWIW, a diagnostic analysis of Norton said that my current memory is syncing to 1067 ns.

  I have also these two links below for key USB PNY to a Best Buy nearby. The first stick of memory PNY seems to correspond to the Crucial memory card. Is - this low density memory PNY memory? And yet once, can I buy a single stick of 4 GB and add to my current 4 GB stick? This 4 GB PNY stick below which seems to fit the profile of Crucial scan is what I would buy if he tell you it's compatible, because I can buy it at a Best Buy near and easily return it if it does not work:

  http://www.BestBuy.com/site/PNY-1-x-4GB-DDR3-low-voltage-notebook-memory/5745153.p?ID=1219153729590&...

  And here is the link to a second best buy PNY 4 GB stick whose plug appear to be closest to the Service of Guide specifications, but this stick may not be low voltage and it has less maximum MHz:

  http://www.BestBuy.com/site/PNY-4GB-DDR3-SDRAM-memory-module/3779273.p?ID=1218431615147&skuId=377927...

  Thank you for your help and your recommendations!

  Hello.  I'll answer my own questions in the last post above.  Fortunately, HP expert Paul Tikanen resolved my questions in a thread with the following response.  Thank you, Mr. Tikkanen!

  "The faster the memory will run in your laptop is at 1066 Mhz, which is the speed of the FSB of the i5 - 450 M.

  processor.

  http://Ark.Intel.com/products/49022/Intel-Core-i5-450M-processor-3M-cache-2_40-GHz?q=%20i5-450M

  So, my recommendation would be for you to buy a module of memory 4 GB DDR3 PC3 - 10600 (1333 MHz).

  Thus, even the 1333 MHz chip will only work at 1066 MHz.

  I had a lot of success with this configuration of brand and the memory chip.

  Regardless of the brand you download, make sure he's 8 the little black chips of memory on each side of the Board, not 4.

  http://www.newegg.com/Product/Product.aspx?Item=N82E16820231341 ".

• upgraded computer laptop i5 to i7 in DV6t - 3000 CTO

  I was wondering if I could upgrade my laptop with an i5 450 m to an i7 840 qm.  Here's my laptop specs.  In the manual it is said that it is one of the processors supported.  And two processors use the same socket.  But f.29 bios will support the i7 without integrated graphics card even though I have the ati card 5650 integrated graphics already in the computer?  I am very experienced with disassemble laptops, but I don't know what the bios F.29 supports.  And if she can always update my bios even if this isn't in the box of books DV6t?

  Laptop: dv6t-3000 CTO

  CPU: i5 - 450 m

  Graphics card: Ati-5650

  Socket: G1

  BIOS: F.29

  Thank you for your time

  Hello:

  You would need to change the motherboard in your for one of the mothers image described in Chapter 3 of the maintenance manual.

  Quad core processors don't work in motherboards dual core and visa versa.

• Pavilion DV6-3000 CTO and Coolsense?

  I use a HP Pavilion Dv6t - 3000 CTO. I want to know: can I configure HP coolsense for my laptop?

  Hey guys,.

  To answer your question about the meaning of cool. The only way to put in place cool sense, but if the feature came with the notebook.

  This isn't something that you can buy. So if it came with the laptop no you can not.

  Ask any other question.

  THX

• dv6t-3000 RAM upgrade

  Hello.

  I have a HP Pavilion dv6-3000 CTO, number of product VX070AV, bought in 2010, with the following specifications

  * Intel i3 M350 CPU 2.27 GHz

  * Windows 7 family x 64

  * Motherboard: 144 c 65,38, the Bus clock: 1066 MHz

  * Ram: 2x2gb, SODIMM Samsung 1067 MHz (non - ECC, sure it's DDR3)

  If possible, I would like to switch to 2 x 4 GB for RAM.  I'm having a hard time to find what (if any) is compatible.  I was thinking one of the following values, but really have no idea.

  http://www.smsassembly.com/8gb-DDR3-1066MHz-Pavilion-DV6-dv6t-series-DDR3-SODIMM-2x-4GB/

  http://www.smsassembly.com/8gb-DDR3-1333mhz-Pavilion-DV6-dv6t-series-DDR3-SODIMM-2x-4GB/

  Any guidance would be appreciated.  Thanks in advance.

  EDIT: Just realized this should be in the upgrade of hardware subforum!  Oops, apologies!

  Hello:

  Either we have to work.

  Since it is the same price, you can get the PC3-10600 memory and transfer it on a machine that can run at 1333 MHz full, you should get a day.

  Your laptop runs only the memory at 1066 MHz, because it is the speed of the FSB of the processor of your laptop.

• Pavilion dv6t 1200 CTO for Ghost boot disk

  Ahoy, all

  I am trying to create a boot disk for purposes of Ghosting. I have the BartPE disk that works with the HP Elitebook 6930p. However, this does not work with Pavilion dv6t 1200 CTO. I think it's because I can't change IDE to AHCI in the BIOS (do not see the option).

  And so I think that the problem lies with the drivers of storage but not sure. When I go to Pavilion dv6t 1200 CTO drivers HP website drivers 'Storage' alone I see relate to the USB and a Ricoh card reader.

  Any help would be greatly appreciated.

  Thank you very much.

  figured it out. necessary to get the Intel Matrix drivers out of the Intel site. I also had to get the drivers Realtek NIC Realtek off-site. those in integrated BartPE. works now.

• Configuration of the areas of tap on HP pavilion dv6t 3000?

  Is someone can you please tell me how I can set up Zones of tap? The clickpad of my Pavilion dv6t-3000 is not good, the buttons are very difficult. Impossible to get an improvement since the parameters of the BIOS, or worse, even the HP service center... I am trying to configure tapping under mouse properties settings, but not able to see the option 'Areas of tap' as stated in the website ( http://support.hp.com/us-en/document/c00678194 )

  The Synaptics ClickPad V7.4 installed version is 15.1.6.64 (29/09/2010).

  Can someone help me please...

  Thank you

  PIX

  Hi David, thanks for posting this... I haven't actually tried the method above, so do not know if it works or not. Before I even gave your method a test, I tried something else and it worked!

  I followed the steps mentioned in this link: http://anterence.blogspot.com/2010/07/enabling-tap-zones-in-synaptics.html?showComment=1300242485556#c6757567949241367366

  It worked! Finally, I was able to set up the area of tap for my laptop.

  Someone else also suggested another way to achieve the same result: http://scottanderson.us/index.php?m=02&y=11&entry=entry110213-163030

  Just a quick note for those who would use the touchpad and the clickpad not... This will not activate if the click of a button is activated. Then uncheck buttons activate or activate the option clickpad and you should be able to use the touchpad click

  Thanks again David, really appreciate that you take the time to reply to this post!

• HP Pavilion dv6t-6100 CTO Quad problem with graphics switchable

  -HP Pavilion dv6t-6100 CTO Quad

  -Win7 64-bit

  -Can not pass an Intel HD 3000 and Radeon 6770

  I recently had a problem with my computer that I solved it by using a recovery disk to do a clean install of windows.  When I was running, I noticed that when I right click on the desktop I no longer get the switchable graphics configuration option.

  I started by redownloading from the site Web of AMD catalyst control center.  For some reason any installing this forced my resolution of 800 x 600 instead of 1366 x 768.  I drove back on two graphics cards drivers and that fixed my resolution.  I went to the HP website and updated all drivers related to graphics cards.  However, the CCC gave an error message saying that it detects all the drivers AMD.  At this point, I uninstalled CCC and other AMD software on the system, and I'm a little stuck.

  I can't download CCC again because it seems to mess up the resolution, but it seems to me to need to change graphics cards.

  Hello TacitRonin,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you are not able to re - install the CCC that there is a problem with the resolution with its installation, and I'd be happy to help you!

  To re - install correctly CCC, I recommend to delete the entire AMD driver on your computer and re - install. To do this, remove the software from programs and features.

  Once the driver is then deleted, please remove the driver from Device Manager by following this document on Uninstall or reinstall a device. This should help to re - install your CCC program to your laptop.

  In addition, I also suggest to use the re HP Recovery Manager - install the supplied with your laptop original drivers. This can done by following this document on the use of the Recovery Manager to restore the software and drivers (Windows 7).

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• HP Pavilion dv6t-7000 CTO: impossible to install the Intel HD Graphics driver

  Hello

  By mistake, I installed the Standard VGA graphics card to replace the Intel HD graphics card on my laptop. Now, I want to just reinstall the graphics driver Intel Graphics HD 4000. For some reason, I get the error message "Setup could not install one or more device drivers. What is the cause of this problem? I tried to restart, restart in safe mode, disabling/uninstalling the VGA driver, but had no success.

  It seems that the driver I'm supposed to install is win64_153336 - using the update utility Intel also gives me this result. He simply refuses to install it. I had this problem before, then I got around it by installing an older driver, sp56808. Now, even if it does not work.

  My laptop is a HP dv6t-7000 CTO Entertainment Notebook PC and my OS is Win 7 Ultimate x 64.

  Thank you for your help.

  We can always hope

  The problem has been resolved. I ran the utility to update again, then downloaded an older version, which is win64_153335. For some reason any, this version successfully installed. Before that, I always had the same error with the other drivers. I must say that I have no idea of what has past.

  It was a pretty trivial thing, and even if it's fixed now, I'm not exactly sure how. I would delete this topic if I could, to leave room for other topics.

• No sound HDMI on dv6t-1100 CTO

  I have a laptop dv6t-1100 CTO Entertainment. When I bought it, it is installed with Windows Vista. Then, I was able to connect it to my home theater HDMI system by simply choosing the HDMI output. Since I upgraded to Windows 7, when I attach the HDMI cable, the image is on the TV, but the sound is still coming through the computer speakers. My sound is IDT HD sound. I opened the settings to change the HDMI Audio output, but only the following choices;  Speakers and headphones double (default), headphones double independent and SPDIF (digital output HP dock screws). I tried to change the default to the last with no difference. I think I have the latest driver installed. Please help, as I want to connect the laptop to my home theater system to run a special program vacation I. Any help would be greatly appreciated.

  It worked! Thank you, David.

• Dv6t 2000 CTO Entertainment Notebook with i7 processor 72QM to Max memory upgrade?

  I have a dv6t with i7 720 m build processory about 3 years ago. I think there clarksfield CPU. I have a 2 x 2 gig installed for total of 4gig from the original version.   I wonder (assuming that Win 7 64 bit family premium that takes in charge until 16gig), this laptop only supports 8gig?  I ran a tool and it has a reference to logic/Chipset memory banks maximum installable memory of 32gig and a reference to the controller memory memory install Max 8gig.  So, what gives? The laptop will support the sticks of memory 2x8gig or just the sticks of memory 2x4gig?  The laptop DV6T 2000 CTO Entertainment.  If it supports 16 gig, I would just buy one of the sticks 8gig rather than 2x4gig. And maybe try to use 2 concerts with the 8gig send me a 10gig for now... or just wait to see if I need a 2nd 8gig.  And an upgrade of the bios will support the 16 gig?

  I thought I would update my own question with the truth and the response of work that hopefully someone other than stubmles help in this.  But in a nutshell the CTO of 2000 models DV6t you could order 2009 about DO DO support 16gig and NOT only 8 GB. I have 2 slots. I have the quad 720QM first edition, yes first edition. The Intel site and the sites of Auditor memory are FALSE!  The saying has been 1st gen Quad cpu supports no more than 2x4gig = 8gigs.  In fact, one of my tools suggests that I can put in up to 32gig assuming I can find sticks of memory 2 x 16gig I don't even think is still for sale not to mention affordability. Spread the word because I hope this helps others. I bought memory to geek and thought that I would be lucky since I read several comments and observations at various locations, which suggests that they were trying to 16gig and indeed he has worked for the 720QM processor.  I did have to update my BIOS HP offers that I have to install to 2010ish, as opposed to the 4 or so that are available today for my model, but I think that have been updated to support my model didn't require much more. I carried out memory tests too in 5 iterations without problem, and in fact it starts immediately without any problem with WIN 7 home premium, recognizing the sticks. I also checked the CPU64z tool for the memory tab.

• HP-Envy-17 t-3000-CTO lw900av: HP-Envy-17 t-3000-CTO Msata SSD upgrade

  I saw the following post and have a similar question

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/HP-envy-17t-3000-CTO-MSSD-mSATA...

  665930-001 300 - GB SSD drive
  Disc SSD of 256 GB 689223-001

  I have a 80 GB SSD, which I think is an MSATA.  There are two updates listed on the HP site, but the prices are prohibitive.  How to find a compatible player to a third party?

  Please see the HP ENVY 17 - Maintenance and Service of Guide for all the different hard drive / SSD / mSata drive configurations that were available on these models. Almost any drive vendors will work on your computer and HP sources these parts from many manufacturers.

  Hard drive (does not support hard disk, cables or screw):
  1 TB 5400 RPM, 12.7 mm 638974-001
  750 GB, 7200 RPM, 9.5 mm 633252-001
  750 GB, 7200 RPM, 9.5 mm hybrid 684506-001
  500 GB, 7200 RPM, 9.5 mm 634925-001
  320 GB, 7200 RPM, 9.5 mm 641672-001

  SSD drive (does not support, cable or screw):
  665930-001 300 - GB SSD drive
  Disc SSD of 256 GB 689223-001
  Disc SSD of 160 GB 665929-001

  mSATA by car:
  128 GB mSATA drive 665931-001
  Drive 80 GB mSATA 665932-001

  A player mSata SSD are not the same. SSD is the same as a hard drive form factor. An SSD is going to be cheaper then a mSata disc. Your choice will depend on what you are trying to do with his computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation