Activation of ping for guests

Similar Questions

• Unable to ping my Guest OS-Linux - 5.8 (IP/hostname) of Host-OS: win-7

  Hi all

  I'm using VMWare workstation-8 on my host OS: win - 7 laptop with guest operating system: Linux OEL 5.8. But I can't ping my guest operating system (IP/hostname) of win - 7. I tried with all the bridge, NAT, host only with WMCI (active) options. I'm able to share the Folders (hgfs) between the guest os and host.

  I want to access a few Oracle application of middle ware (running on reviews: Linux os) through Win-7 host operating system.

  Any suggestions would be very helpful.

  Machine: DELL XPS

  SE host: Windows-7 (64-bit)

  Guest operating system: Linux OEL 5.8

  Thank you

  Remy

  I changed to the bridge and enable (check) "State of the repeated physical network connection.

  Now I am able to ping and access Oracle Applications running on the guest operating system of the host operating system.

  Thank you

  Remy

• Alarm! Just bought '-full for guests of the CS ", but I get the creative cloud without the tools I wanted to buy!

  I just bought "-full for guests of the CS ' today, but I get Creative cloud for a year? And I can only download Photoshop and Muse as versions of trail I want creative cloud, but tools such as photoshop and muse etc. I don't want to not spend my money on useless things, and what do I do to change that today, because the offer for '-full for guests of the CS ' no longer available tomorrow, thank you, Sebastian

  Hi Sebastian,.

  I checked your account and your Adobe CC subscription is active.

  Please see the below help document to correct the error of the trial:

  Creative Cloud applications unexpectedly back in the test mode. CS6, CCM

  Kind regards

  Sheena

• Windows mail the filler of unique active automatic name for a day or two after the last contact with the person.

  Windows mail. Filling of unique active automatic name for a day or two after the last contact with the person. After that, I have to manual search in contacts. Is this normal?

  Thanks in advance

  Hi Abbeypiece Ltd,

  The feature of AutoComplete in Windows Mail doesn't seem to use the Contacts folder. Instead, he uses the history of most recently used contacts.

  For more information, you can consult the following article:

  Change Windows Mail send settings

  Hope this information is useful.

• 4 x WAP4410N VLAN for guest network

  Hi there everyone,

  You want to have a problem of my resolved.  I am running 4 x WAP4410N access points configured with one corporate ssid with WPA2 Enterprise authentication that points to a server in network access protection.  What I'm trying to do is to add a second ssid to all my points of access for guests only and cannot connect to the departmental resources/devices.  I think I have to VLAN so that it works correctly.

  Four access points in various parts of the building are connected and are wired in different switches SG300.  A port on a SG300-52 in my server room is plugged into a port on my firewall that I would use for DHCP.

  What should I do to get this working correctly?  At the time of my comments to test network is not even give an IP address to the devices, which I think is related to the VLAN.

  I do not know what ports I leave the identified tag-no, how to configure the VLANs on multiple switches, etc.  Any help would be appreciated.  It was suggested to me that I could use dedicated to guest access separate access points, but I like to keep the amount of access points down to the minimum required.

  I think you may have found the problem. I apologize I have not asked if you were on layer 2. I would have thought it.

  If they all Layer 3, maybe you could just add a few routes? Switching is not my field stronger.

  Personally as needed I just don't sleep 2 and use VLANs

  Eric

• Steps required for guest access / self-supply accounts

  I'm a little overwhelmed with the information concerning the establishment of users invited on the wireless network and have a few questions I was hoping that the community would respond.

  I use a WISN on the 4.2 version of the software, as well as a WC on the same version.

  1. is it possible to have accounts created by users themselves, once they join the wireless network? If so, what will do to put in place?

  2. a VLAN especially should be created for customers to use?

  For the first question, if you want more that putting an email address for tracking needs, users Fella5 is right.

  To answer the second question, it is unnecessary on the plan technique one VLAN special for guest users. In most cases, however, you should have one to better apply the security settings of your network clients. In our office, with 10 people, we use the same subnet for guests, voice and internal data. However, we use 3 different SSIDS with different policies and security strategies QoS applied to them. And the guest SSID has an ACL applied to limit traffic to the Internet only. When you are given a 27 subnet to use, do you :)

• Re: Activation Server stopped for Creative Suite 2 and Acrobat 7 product Macromedia

  I agree wholeheartedly, it is no possible to treat a person who goes to $1500on the product.

  Branch to a new discussion.

  Jamesb25434196 I'm sorry you are facing trouble downloading the installation of Acrobat 7 files.  Acrobat 7.0 for Mac OS didn't include activation technology so is not affected by the activation server to stop.  You want to locate your original installation media and use your registered serial number.  You can find details on how to locate your registered serial number Acrobat 7.0 to quickly find the serial number of your Adobe product .

  If you choose to download Creative Suite 2 Premium, at the time of the purchase, the download may be under your account at http://www.adobe.com/.  You can find details on how to download purchased software titles to find downloaded Adobe apps and app files...

  We invite you to update this discussion if you have any additional questions.

  For a complete list of Adobe software titles affected by the activation server stop see Activation Server stopped for Creative Suite 2, Acrobat 7 and Macromedia... products

• Regarding: "full - for guests of CS.

  Hello
  I use Photoshop CC and I pay for it €12,29 per month. The 1-year term expires in spring 2015. I plan to purchase/rental of InDesign. On www.adobe.com there is an interesting offer: '-full for guests of the CS '
  My questions are:
  1. can I buy it and if yes, what will be the cost per month: €36.89 or + €36.89 12,29?
  2. what software are included in full - for customers of the CS?
  Thank you in advance,
  Maria

  Cloud Plans https://creative.adobe.com/plans

  - and conditions for subscription http://www.adobe.com/misc/subscription_terms.html

  -What is in the set of Cloud http://www.adobe.com/creativecloud/catalog/desktop.html

  -http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

• cannot ping a guest: 32-bit redhat5

  Hello

  After s clean installation ISO (no error) has this computer invited, see peth0 instead of eth0 adapter and does not

  even if I delete all devices and equipment, still does not work, any ideas

  Thank you

  Ariel

  ArielStu wrote:

  Hello

  After s clean installation ISO (no error) has this computer invited, see peth0 instead of eth0 adapter and does not

  even if I delete all devices and equipment, still does not work, any ideas

  Thank you

  Ariel

  @Ariel

  Can you ping the guest with other systems (default gateway) on the local network that will accept pings?

  Did you install VMware tools on the guest RHEL5?

  What kernel are you running?  uname - sr

  RHEL5 installation with virtualization installs a kernel Xen, I've seen problems.  According to me, he lifts the bridge of peth0 interface in the configuration as well.  You can try reinstalling RHEL5 with no virtualization and not IPV6 then install VMware tools.

• Activation of FSX excludes guest... account?

  Cannot run FSX fully using FSX otherwise account invited - available only 30 minutes of trial - fully active using my normal account (admin) and all standard accounts I have subsequently create.  Problem is probably related to the attempt of son wrongly, re - install FSX of the guest account and my subsequent attempt to correct in uninstalling and reinstalling.  Any help to regain full access most appreciated guest account.

  Not sure why my Vista Gaming Forum request has apparently been redirected to Windows 7?

  Hi Graham40,

  1. were you able to play FSX in earlier guest account?

  2. you have defined one any parental control for Internet access?

  If you were able to play the game in guest account earlier, I suggest you try to turn off / on the guest account and check if it helps.

  You can follow the given link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-the-guest-account-on-or-off

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ping for the pix vpn problem

  Hello

  I got a pix 501 (6.3 - 4) on a local network and try to use Cisco VPN Client (4.0.2-D) on a remote pc.

  I can open a vpn session.

  I can't ping from the remote pc to the LAN

  I can ping from any station on the LAN to the remote pc

  After that I did a ping of a station on the LAN to the remote pc, I ping the remote computer to the local network.

  I am so newb, trying for 2 days changing ACLs, no way.

  I must say that I am in dynamic ip wan on the local network and the remote pc.

  Any idea about this problem?

  Any help is welcome.

  Here is the configuration of my pix:

  6.3 (4) version PIX

  interface ethernet0 10baset

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password * encrypted

  passwd * encrypted

  pixfirewall hostname

  domain ciscopix.com

  clock timezone THATS 1

  clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  correction... /...

  fixup protocol tftp 69

  names of

  name 192.168.42.0 Dmi

  inside_access_in ip access list allow a whole

  inside_outbound_nat0_acl ip access list allow any 192.168.229.0 255.255.255.0

  outside_cryptomap_dyn_20 ip access list Dmi 255.255.255.0 allow 192.168.229.32 255.255.255.224

  access-list outside_cryptomap_dyn_20 allow icmp a whole

  pager lines 24

  opening of session

  logging trap information

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside the 209.x.x.x.255.255.224

  IP address inside 192.168.42.40 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool dmivpndhcp 192.168.229.1 - 192.168.229.254

  location of PDM 192.168.229.1 255.255.255.255 outside

  209.165.x.x.x.255.255 PDM location inside

  209.x.x.x.255.255.255 PDM location outdoors

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_outbound_nat0_acl

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Route outside 0.0.0.0 0.0.0.0 209.165.200.225 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  Enable http server

  Dmi 255.255.255.0 inside http

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  TFTP server inside the 192.168.42.100.

  enable floodguard

  Permitted connection ipsec sysopt

  AUTH-prompt quick pass

  AUTH-guest accept good

  AUTH-prompt bad rejection

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

  Dynamic crypto map dynmap 20 match address outside_cryptomap_dyn_20

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  ISAKMP allows outside

  ISAKMP identity address

  part of pre authentication ISAKMP policy 20

  ISAKMP policy 20 3des encryption

  ISAKMP policy 20 chopping sha

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 86400

  vpngroup address dmivpndhcp pool dmivpn

  vpngroup dns 192.168.42.20 Server dmivpn

  vpngroup dmivpn wins server - 192.168.42.20

  vpngroup dmivpn by default-field defi.local

  vpngroup idle 1800 dmivpn-time

  vpngroup password dmivpn *.

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  VPDN username vpnuser password *.

  VPDN allow outside

  VPDN allow inside

  dhcpd address 192.168.42.41 - 192.168.42.72 inside

  dhcpd lease 3600

  dhcpd ping_timeout 750

  Terminal width 80

  Cryptochecksum: *.

  Noelle,

  Add the command: (in config mode): isakmp nat-traversal

  Let me know if it helps.

  Jay

• Automatic start/stop for guest settings keep reproduce every time I access the properties

  Greetings,

  I have a single ESXi host 5.5 with a single Win 2012 std server prompt.   I have a second guest, but is not in production. Several months ago I "thought" I activated the auto start and stop for this particular customer.  Due to problems of food in the building today, I had the opportunity to stop the comments and the turning off of the host completely.   After the reboot of the host, my guest, never started (automatically). I connected to the host via vsphere client and started manually.  No problems.

  I decided to check the settings of automatic start/stop and it is set to manual.  So, either I never actually put it on automatic (and I just have problems of memory in my head (not unusual for me)) or I put it really, and something happened where he became disabled or brought back to the default value.

  That said, I went to properties of start-up automatic and as mentioned above, found it turned off, I was able to allow him, but when he returned to the screen (after clicking OK), it displays TWO of each of my virtual machines in the Autorun screen.  I went back to see if I could change/delete/remove the extras (I've found a way to do it), and when I came back out of the screen there are THREE virtual computers listed in the pane. See attachment.  Anyone know what is happening here and how can I remedy the situation?

  Am I just being a fool and lack of obvious?

  Thank you.

  P....

  

  Exit the VSphere client and restart it solved the problem.  I presume a video type of bug, or maybe a bug with my version of the client.

• activation of cpu for 64 bit os

  Hello

  I need to know if my 4 x instances virtual of MS Windows Server 2003 R2 Standard edition SP2 32 bit still will start if I change the VM breaks config CPU to support the Win 2008 r2 64 bit opperating system.  I'm afraid that they crash or start not propperly after the change was made.

  CAN someone eplease give me pease of mind.    All of my virtual servers will start if the cpu is enabled for 64 bit opperating suystems?

  JS_Marley wrote:

  Can I trust you?

  Even I don't trust myself!

  Just wait for others to post here... I have time... I can wait...

  Intel-VT activation is essential to run the 64-bit clients. This does not activate 64 bit itself, but other things that VMware needs to run 64-bit guests.

  The brother-in-law of a cousin of a colleague of my wifes sister running the 32-bit clients and 64-bit all and I heard he should have said once, it happened often enough that it had to be activated after all has been set up and running.

  AWo

• How can I disable admin for guest?

  I am the administrator and used the user prompted for my work. I looked at the settings and given one to use as an administrator and lost all my info in the comments. I want to just hand it to the guest user to where he was before foolishly, I played with the settings. Help, please.

  Hello

  The reset Firefox feature can solve many problems by restoring Firefox to its factory default state while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• FN-active button continuously for Satellite C670D-125 after Windows Update 10

  Hello everyone,

  After the update of my Satellite C670D-125 to 10 windows function (fn) key is active at all times. This means I have to press the fn key when I want to use the standard function key (for example, the numbers above the letters). Only numbers wouldn't be a big problem, but also for the space key and the esc key, I have to press fn in order to use the standard function (space and escape to ).

  This behavior occurs in bios setup also now! So it seems to me that the update enabled an integrated keyboard.

  In other discussions and forums of the facility (re-) "VAT package" is recommended, but there is no option for my notebook on the fn feature and the of - and reinstalling had no effect. Another option was to change the setting in the bios Setup, but there is no menu entry in my bios, which deals with this issue... It seems that I have a simplified bios (I guess because there is not a lot of options for the implementation of the material) and I even installed the last update of the bios on the side support toshiba.

  Everyone has the same problem or an idea how can I solve the problem?

  Thank you very much
  Taomir

  In other discussions and forums of the facility (re-) "VAT package" is recommended, but there is no option for my notebook on the fn feature and the of - and reinstalling had no effect.

  The relocation of the PPV would be useful, but only in case your would still use Windows 7

  Given that Windows 8 the VAP has been replaced by the driver for the Toshiba system, but the fact is that your C660 is not listed as 10 Windows supported model and that is why there is Win 10 drivers are not available for this unit.

  Anyway, you can try to install the system Win 10 driver released for other series laptop... I don't know if it will work, but I guess it's the last resort for repair running Win 10...

  by the way: here is the link for Win 10 drivers:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG