cannot ping a guest: 32-bit redhat5
Hello
After s clean installation ISO (no error) has this computer invited, see peth0 instead of eth0 adapter and does not
even if I delete all devices and equipment, still does not work, any ideas
Thank you
Ariel
ArielStu wrote:
Hello
After s clean installation ISO (no error) has this computer invited, see peth0 instead of eth0 adapter and does not
even if I delete all devices and equipment, still does not work, any ideas
Thank you
Ariel
@Ariel
Can you ping the guest with other systems (default gateway) on the local network that will accept pings?
Did you install VMware tools on the guest RHEL5?
What kernel are you running? uname - sr
RHEL5 installation with virtualization installs a kernel Xen, I've seen problems. According to me, he lifts the bridge of peth0 interface in the configuration as well. You can try reinstalling RHEL5 with no virtualization and not IPV6 then install VMware tools.
Tags: VMware
Similar Questions
-
Cannot run any guest 64 bit on ESXi
Hello
I have an ESXi running on a HP DL320G5 with an Intel Xeon 3050. Support of Intel VT is enabled and that Xeon certainly supports it.
But I can't get any guest 64-bit running. They crash or refuse to start. I can't even own VMware appliances (VIMA etc.) to run.
Any idea that coulkd be the problem?
Unfortunately, this work around is reserved for hosted products. There is no work around for ESXi. There may be a newer BIOS available at HP.
-
Cannot ping host or guest using VM Workstation 5.5
Local host Machine Windows XP
VMWare Network Adpater VMNet1 (host)
IP 192.168.189.1
Adpater Ethernet Local machine
Suffix connection specific DNS: ISP
IP address: 192.168.1.101
VM guest computer
Ethernet adapter PB PVT:
Suffix connection specific DNS: white
IP address: 161.228.210.176
The network of the virtual computer is configured to use "Home" only
When I ping the host computer I get "Request timed out".
When I ping the Guest Machine (VM) I get "Request timed out".
Logon at the prompt, right click on 'My network places', choose 'Properties', right click on the connection to the local network and choose "Properties". Open the properties of "Internet (TCP/IP) Protocol". Select "Obtain an IP address automatically" and "Obtain DNS server address automatically". Let him.
If this does not work, provide "ipconfig/all" host AND guest, but also some screenshots of the tabs in the VMware virtual network Editor!
If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!
AWo
VCP / vEXPERT 2009
-
Cannot ping Lan devices in Vlan
Hello
I looked for a solution to this for the week without success. I came across a Cisco C3560, which is used because of its ability of poe to power some Deskphones Voip. While the works of great poe, machines connected to the switch can only communicate with each other and don't can't ping or otherwise access any device connected directly to the router of the network.
The Cisco switch is configured with a vlan and a default gateway, but nothing comes out by behind the switch. On connected devices can ping by default gateway (192.168.0.1 - a tp-link router), receive a lease dhcp from the router said successfully and can connect to the internet, but on the local network, nothing works. (unable to connect to the printer connetced directly to the router or other computers connected directly to the router.
Any advice? I am new to cisco switches, don't know what I'm doing here. I'm just trying to get devices that are connected directly to the switch to communicate with devices connected directly to the router.
Switch#show runBuilding configuration...
Current configuration : 1528 bytes!version 12.2service configno service padservice timestamps debug uptimeservice timestamps log uptimeno service password-encryption!hostname Switch!enable secret 5 {}{}{}{}{}{}{}{}{}{}{}{}!no aaa new-modelclock timezone UTC 2system mtu routing 1500ip subnet-zero!!!!no file verify autospanning-tree mode pvstspanning-tree extend system-id!vlan internal allocation policy ascending!interface FastEthernet0/1!interface FastEthernet0/2!interface FastEthernet0/3!interface FastEthernet0/4!interface FastEthernet0/5!interface FastEthernet0/6!interface FastEthernet0/7!interface FastEthernet0/8!interface FastEthernet0/9!interface FastEthernet0/10!interface FastEthernet0/11!interface FastEthernet0/12!interface FastEthernet0/13!interface FastEthernet0/14!interface FastEthernet0/15!interface FastEthernet0/16!interface FastEthernet0/17!interface FastEthernet0/18!interface FastEthernet0/19!interface FastEthernet0/20!interface FastEthernet0/21!interface FastEthernet0/22!interface FastEthernet0/23!interface FastEthernet0/24 switchport mode access!interface GigabitEthernet0/1!interface GigabitEthernet0/2!interface Vlan1 ip address 192.168.0.26 255.255.255.0 no ip route-cache!ip default-gateway 192.168.0.1ip classlessip default-network 192.168.0.0ip http server!access-list 1 permit any log!control-plane!!line con 0line vty 0 4 password XXXXXXXXX login length 0line vty 5 15 password XXXXXXXX login length 0!end
Switch#show interface
Vlan1 is up, line protocol is up Hardware is EtherSVI, address is 001e.bd27.c4c0 (bia 001e.bd27.c4c0) Internet address is 192.168.0.26/24 MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 3 packets/sec 138534 packets input, 9472693 bytes, 0 no buffer Received 0 broadcasts (68 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 30296 packets output, 2248820 bytes, 0 underruns 0 output errors, 1 interface resets 0 output buffer failures, 0 output buffers swapped out
FastEthernet0/2 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c484 (bia 001e.bd27.c484) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:56, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 46000 bits/sec, 37 packets/sec 5 minute output rate 582000 bits/sec, 71 packets/sec 1941044 packets input, 327622438 bytes, 0 no buffer Received 38375 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 30699 multicast, 0 pause input 0 input packets with dribble condition detected 3224783 packets output, 2069682884 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/4 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c486 (bia 001e.bd27.c486) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:01, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 129069 packets input, 64947010 bytes, 0 no buffer Received 9953 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9759 multicast, 0 pause input 0 input packets with dribble condition detected 600269 packets output, 45540585 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
FastEthernet0/6 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c488 (bia 001e.bd27.c488) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:50, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 32693 packets input, 4244428 bytes, 0 no buffer Received 9942 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9759 multicast, 0 pause input 0 input packets with dribble condition detected 588460 packets output, 45003331 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
FastEthernet0/8 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c48a (bia 001e.bd27.c48a) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:30, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 32694 packets input, 4243413 bytes, 0 no buffer Received 9934 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9757 multicast, 0 pause input 0 input packets with dribble condition detected 588485 packets output, 45009466 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
FastEthernet0/12 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c48e (bia 001e.bd27.c48e) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:28, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 32742 packets input, 4252075 bytes, 0 no buffer Received 9947 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9763 multicast, 0 pause input 0 input packets with dribble condition detected 588497 packets output, 45019272 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
FastEthernet0/13 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c48f (bia 001e.bd27.c48f) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:13, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 148160 packets input, 73818106 bytes, 0 no buffer Received 9973 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9760 multicast, 0 pause input 0 input packets with dribble condition detected 599666 packets output, 49045070 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
FastEthernet0/14 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c490 (bia 001e.bd27.c490) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:05, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 129165 packets input, 68409495 bytes, 0 no buffer Received 9982 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9773 multicast, 0 pause input 0 input packets with dribble condition detected 600283 packets output, 45551497 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
FastEthernet0/18 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c494 (bia 001e.bd27.c494) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:49, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 21000 bits/sec, 18 packets/sec 5 minute output rate 13000 bits/sec, 16 packets/sec 606386 packets input, 88151136 bytes, 0 no buffer Received 159883 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 55198 multicast, 0 pause input 0 input packets with dribble condition detected 941617 packets output, 308269004 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
FastEthernet0/20 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c496 (bia 001e.bd27.c496) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:54, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 1000 bits/sec, 1 packets/sec 5 minute output rate 1000 bits/sec, 2 packets/sec 515813 packets input, 87006769 bytes, 0 no buffer Received 21466 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 19952 multicast, 0 pause input 0 input packets with dribble condition detected 1858112 packets output, 1700009146 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
FastEthernet0/24 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 001e.bd27.c49a (bia 001e.bd27.c49a) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 546556 packets output, 41182636 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
GigabitEthernet0/1 is up, line protocol is up (connected) Hardware is Gigabit Ethernet, address is 001e.bd27.c481 (bia 001e.bd27.c481) MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive not set Full-duplex, 1000Mb/s, link type is auto, media type is 10/100/1000BaseTX SFP input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 556000 bits/sec, 83 packets/sec 5 minute output rate 76000 bits/sec, 63 packets/sec 4457827 packets input, 3961330567 bytes, 0 no buffer Received 15028 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 11213 multicast, 0 pause input 0 input packets with dribble condition detected 3822373 packets output, 728132696 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out
Switch#show vlan
VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4, Fa0/5, Fa0/6, Fa0/7, Fa0/8, Fa0/9, Fa0/10, Fa0/11, Fa0/12, Fa0/13, Fa0/14, Fa0/15, Fa0/16 Fa0/17, Fa0/18, Fa0/19, Fa0/20, Fa0/21, Fa0/22, Fa0/23, Fa0/24, Gi0/1, Gi0/21002 fddi-default act/unsup1003 token-ring-default act/unsup1004 fddinet-default act/unsup1005 trnet-default act/unsup
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------1 enet 100001 1500 - - - - - 0 01002 fddi 101002 1500 - - - - - 0 01003 tr 101003 1500 - - - - - 0 01004 fdnet 101004 1500 - - - ieee - 0 01005 trnet 101005 1500 - - - ibm - 0 0
Remote SPAN VLANs------------------------------------------------------------------------------
Primary Secondary Type Ports------- --------- ----------------- ------------------------------------------
Hello
first thing, please edit your post and remove your remote vty lines access password
never send passwords on a public forum for the just in case production equipment
line vty 0 4
password xxxxxx***********************
Your question
What is the configuration of the router as a switch which seems to work correctly you're saying and I configured its doing its job, don't forget you said that you cannot route no between the router and the router switch should take care of this, whats the vlan ports on the router are on is - what the same subnet do they get an ip address in the same subnet off dhcp as devices of switching, if they do, and you cannot ping them to the same subnet theres something upward on the side of the router it would treat for layer 3 routing ip traffic
the ping to the router devices connected to the cisco switch and can the device on the router cannot ping devices switches
If you move a device out of the router and attach it to the doe sit switch still work ok, reach the talk of the internet to other devices on the switch?
As there is a layer 2 switch you don't need this command you have your entry door you can remove it.. .IP default-network 192.168.0.0
-
Peer AnyConnect VPN cannot ping, RDP each other
I have an ASA5505 running ASA 8.3 (1) and ASDM 7.1 (1). I have a remote access VPN set up and remote access users are able to connect and access to network resources. I can ping the VPN peers between the Remote LAN. My problem counterparts VPN cannot ping (RDP, CDR) between them. Ping a VPN peer of reveals another the following error in the log of the SAA.
Asymmetrical NAT rules matched for flows forward and backward; Connection for icmp outside CBC: 10.10.10.8 outside dst: 10.10.10.9 (type 8, code 0) rejected due to the failure of reverse NAT.
Here's my ASA running-config:
ASA Version 8.3 (1)
!
ciscoasa hostname
domain dental.local
activate 9ddwXcOYB3k84G8Q encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS lookup field inside
DNS server-group DefaultDNS
192.168.1.128 server name
domain dental.local
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the RAVPN object
10.10.10.0 subnet 255.255.255.0
network of the NETWORK_OBJ_10.10.10.0_28 object
subnet 10.10.10.0 255.255.255.240
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
access-list Local_LAN_Access note VPN Customer local LAN access
Local_LAN_Access list standard access allowed host 0.0.0.0
DefaultRAGroup_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
Note VpnPeers access list allow peer vpn ping on the other
permit access list extended ip object NETWORK_OBJ_10.10.10.0_28 object NETWORK_OBJ_10.10.10.0_28 VpnPeers
pager lines 24
Enable logging
asdm of logging of information
logging of information letter
address record [email protected] / * /
exploitation forest-address recipient [email protected] / * / level of information
record level of 1 600 6 rate-limit
Outside 1500 MTU
Within 1500 MTU
mask 10.10.10.5 - 10.10.10.10 255.255.255.0 IP local pool VPNPool
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 711.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, all) static source all electricity static destination RAVPN RAVPN
NAT (inside, outside) static static source NETWORK_OBJ_10.10.10.0_28 destination NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_10.10.10.0_28
NAT (inside, outside) static source all all NETWORK_OBJ_10.10.10.0_28 of NETWORK_OBJ_10.10.10.0_28 static destination
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
network of the RAVPN object
dynamic NAT (all, outside) interface
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-SHA-TRANS mode transit
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP ESP-AES-128-SHA ESP - AES - 192 - SHA ESP - AES - 256 - SHA ESP - 3DES - SHA - OF - SHA ESP - AES - 128 - SHA - TRANS ESP - AES - 192 - SHA - TRANS ESP - AES - 256 - SHA - ESP ESP - 3DES - SHA - TRANS TRANS-DES - SHA - TRANS
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
trustpoint crypto ca-CA-SERVER ROOM
LOCAL-CA-SERVER key pair
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ciscoasa
billvpnkey key pair
Proxy-loc-transmitter
Configure CRL
crypto ca server
CDP - url http://ciscoasa/+CSCOCA+/asa_ca.crl
name of the issuer CN = ciscoasa
SMTP address [email protected] / * /
crypto certificate chain ca-CA-SERVER ROOM
certificate ca 01
* hidden *.
quit smoking
string encryption ca ASDM_TrustPoint0 certificates
certificate 10bdec50
* hidden *.
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
enable client-implementation to date
Telnet 192.168.1.1 255.255.255.255 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd outside auto_config
!
dhcpd address 192.168.1.50 - 192.168.1.99 inside
dhcpd allow inside
!
a basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
SVC disk0:/anyconnect-win-3.1.04072-k9.pkg 1 image
SVC profiles DellStudioClientProfile disk0: / dellstudioclientprofile.xml
enable SVC
tunnel-group-list activate
internal-password enable
chip-tunnel list SmartTunnelList RDP mstsc.exe windows platform
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.1.128 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
Dental.local value by default-field
WebVPN
SVC value vpngina modules
internal DefaultRAGroup_1 group strategy
attributes of Group Policy DefaultRAGroup_1
Server DNS 192.168.1.128 value
Protocol-tunnel-VPN l2tp ipsec
Dental.local value by default-field
attributes of Group Policy DfltGrpPolicy
Server DNS 192.168.1.128 value
VPN - 4 concurrent connections
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
value of group-lock RAVPN
value of Split-tunnel-network-list Local_LAN_Access
Dental.local value by default-field
WebVPN
the value of the URL - list DentalMarks
SVC value vpngina modules
SVC value dellstudio type user profiles
SVC request to enable default webvpn
chip-tunnel enable SmartTunnelList
wketchel1 5c5OoeNtCiX6lGih encrypted password username
username wketchel1 attributes
VPN-group-policy DfltGrpPolicy
WebVPN
SVC value DellStudioClientProfile type user profiles
username privilege 15 encrypted password 5c5OoeNtCiX6lGih wketchel
username wketchel attributes
VPN-group-policy DfltGrpPolicy
WebVPN
modules of SVC no
SVC value DellStudioClientProfile type user profiles
jenniferk 5.TcqIFN/4yw0Vq1 of encrypted password privilege 0 username
jenniferk username attributes
VPN-group-policy DfltGrpPolicy
WebVPN
SVC value DellStudioClientProfile type user profiles
attributes global-tunnel-group DefaultRAGroup
address pool VPNPool
LOCAL authority-server-group
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
tunnel-group DefaultRAGroup ppp-attributes
PAP Authentication
ms-chap-v2 authentication
eap-proxy authentication
type tunnel-group RAVPN remote access
attributes global-tunnel-group RAVPN
address pool VPNPool
LOCAL authority-server-group
tunnel-group RAVPN webvpn-attributes
enable RAVPN group-alias
IPSec-attributes tunnel-group RAVPN
pre-shared key *.
tunnel-group RAVPN ppp-attributes
PAP Authentication
ms-chap-v2 authentication
eap-proxy authentication
type tunnel-group WebSSLVPN remote access
tunnel-group WebSSLVPN webvpn-attributes
enable WebSSLVPN group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
173.194.64.108 SMTP server
context of prompt hostname
HPM topN enable
Cryptochecksum:3304bf6dcf6af5804a21e9024da3a6f8
: end
Hello
Seems to me that you can clean the current NAT configuration a bit and make it a little clearer.
I suggest the following changes
network of the VPN-POOL object
10.10.10.0 subnet 255.255.255.0
the object of the LAN network
subnet 192.168.1.0 255.255.255.0
PAT-SOURCE network object-group
object-network 192.168.1.0 255.255.255.0
object-network 10.10.10.0 255.255.255.0
NAT static destination LAN LAN (indoor, outdoor) static source VPN-VPN-POOL
destination VPN VPN-POOL POOL static NAT (outside, outside) 1 static source VPN-VPN-POOL
NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source
The above should allow
- Dynamic PAT for LAN and VPN users
- NAT0 for traffic between the VPN and LAN
- NAT0 for traffic between the VPN users
You can then delete the previous NAT configurations. Naturally, please save the configuration before you make the change, if you want to revert to the original configuration.
no static source nat (inside, everything) all electricity static destination RAVPN RAVPN
No source (indoor, outdoor) nat static static NETWORK_OBJ_10.10.10.0_28 destination NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_10.10.10.0_28
No source (indoor, outdoor) nat static everything all NETWORK_OBJ_10.10.10.0_28 of NETWORK_OBJ_10.10.10.0_28 static destination
No network obj_any object
No network object RAVPN
In case you do not want to change the settings a lot you might be right by adding this
network of the VPN-POOL object
10.10.10.0 subnet 255.255.255.0
destination VPN VPN-POOL POOL static NAT (outside, outside) 1 static source VPN-VPN-POOL
But the other above configurations changes would make NAT configurations currently simpler and clearer to see every goal of "nat" configurations.
-Jouni
-
Router and Switch cannot ping each other
Hello
I just build a lab at home.
In my current lab, I have 2 SW and 3 the router.
I have a problem, I do not know what Miss me in my config. My router cannot ping my SW.
and I also want to change my LAN from VLAN 1 interface connection at 30 of VLAN... but when I configure the VLAN 30 he show me line is in PLACE but the Protocol is DOWN.
Another question, if I want to create a VLAN with a different address, what should I do?
for example
VLAN 10 > 10.10.10.1
VLAN 20 > 20.20.20.1
etc...interface Vlan1 description LAN ip address 10.10.10.1 255.255.255.0 secondary ip address 30.30.30.1 255.255.255.0 secondary ip address 40.40.40.1 255.255.255.0 secondary ip address 20.20.20.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat inside ip virtual-reassembly dot1q tunneling ethertype 0x9100 hold-queue 100 out!
Here's the conf for my RT. ROUTER > 877SW > 2950 24 WSCISCO_877#sh runBuilding configuration... Current configuration : 3468 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname CISCO_877!boot-start-markerboot-end-marker!enable secret 5 $1$.ISW$71jzJ0Or0nenXZd/8D8.x/!no aaa new-model!!dot11 syslogip cefno ip dhcp use vrf connectedip dhcp excluded-address 20.20.20.0 20.20.20.30!ip dhcp pool LAN network 20.20.20.0 255.255.255.0 domain-name SYS.local default-router 20.20.20.1 dns-server 202.123.2.6 202.123.2.11 lease 0 4!!!!!username admin privilege 15 secret 5 $1$A1V4$GR9sPtPVXDRoOiDKRtC1M1! ! archive log config hidekeys!!!!!interface ATM0 description (OUTSIDE)ADSL_WAN no ip address no ip redirects no ip unreachables no ip proxy-arp no atm ilmi-keepalive pvc 8/35 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto !interface FastEthernet0!interface FastEthernet1 dot1q tunneling ethertype 0x9100!interface FastEthernet2!interface FastEthernet3!interface Vlan1 description LAN ip address 20.20.20.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat inside ip virtual-reassembly dot1q tunneling ethertype 0x9100 hold-queue 100 out!interface Vlan30 description LAN no ip address no ip redirects no ip unreachables no ip proxy-arp shutdown hold-queue 100 out!interface Dialer0 description WAN_OUTSIDE ip address negotiated ip mtu 1498 ip nat outside ip virtual-reassembly max-reassemblies 1024 encapsulation ppp ip tcp adjust-mss 1400 dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap callin ppp chap hostname [email protected]/* */ ppp chap password 7 071C385F5C001D0403 ppp pap sent-username [email protected]/* */ password 7 120A1C04000208053E ppp ipcp mask request ppp ipcp route default ppp ipcp address accept!ip default-gateway 20.20.20.1ip forward-protocol ndip route 0.0.0.0 0.0.0.0 Dialer0ip route 10.10.10.0 255.255.255.0 Vlan1!no ip http serverno ip http secure-serverip nat inside source list 110 interface Dialer0 overload!access-list 110 permit ip 20.20.20.0 0.0.0.255 anyaccess-list 110 permit ip 10.10.10.0 0.0.0.255 anyaccess-list 110 permit ip 30.30.30.0 0.0.0.255 anyaccess-list 110 permit ip 40.40.40.0 0.0.0.255 anyaccess-list 110 permit ip 50.50.50.0 0.0.0.255 anyaccess-list 110 permit ip 60.60.60.0 0.0.0.255 any!!!control-plane!banner motd ^C :'######::'##::::'##:'########::'######::'##::::'##:'##... ##: ##:::: ##: ##.....::'##... ##: ##:::: ##: ##:::..:: ##:::: ##: ##::::::: ##:::..:: ##:::: ##:. ######:: #########: ######:::. ######:: #########::..... ##: ##.... ##: ##...:::::..... ##: ##.... ##:'##::: ##: ##:::: ##: ##:::::::'##::: ##: ##:::: ##:. ######:: ##:::: ##: ########:. ######:: ##:::: ##::......:::..:::::..::........:::......:::..:::::..:: ^C!line con 0 no modem enableline aux 0line vty 0 4 password 7 xxxx login!scheduler max-task-time 5000end CISCO_877#
And this is for my SWCATALYST_2960_01#sh runBuilding configuration... Current configuration : 5166 bytes!version 12.1no service padservice timestamps debug uptimeservice timestamps log uptimeservice password-encryption!hostname CATALYST_2960_01!enable secret 5 $1$MGrN$PtHgL3KfH0vy7Mr1Fo0hF.!ip subnet-zero!ip ssh time-out 120ip ssh authentication-retries 3vtp mode transparent!!spanning-tree mode rapid-pvstno spanning-tree optimize bpdu transmissionspanning-tree extend system-idspanning-tree vlan 1-4093 priority 16384!!!!vlan 10 name ADSL!vlan 20 name GUEST!vlan 30 name MANAGEMENT!interface Port-channel1 switchport trunk allowed vlan 1,10,20,30 switchport mode trunk switchport nonegotiate spanning-tree cost 1!interface FastEthernet0/1 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/2 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/3 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/4 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/5 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/6 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/7 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/8 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/9 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/10 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/11 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/12 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/13 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/14 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/15 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/16 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/17 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/18 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/19 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/20 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/21 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/22 description SPARE switchport mode access switchport nonegotiate spanning-tree portfast spanning-tree bpduguard enable spanning-tree cost 1000!interface FastEthernet0/23 switchport trunk allowed vlan 1,10,20,30 switchport mode trunk switchport nonegotiate channel-group 1 mode active!interface FastEthernet0/24 switchport trunk allowed vlan 1,10,20,30 switchport mode trunk switchport nonegotiate channel-group 1 mode active!interface Vlan1 ip address 20.20.20.2 255.255.255.0 no ip route-cache!interface Vlan10 no ip address no ip route-cache shutdown!interface Vlan30 no ip address no ip route-cache shutdown!ip default-gateway 20.20.20.1ip http server!line con 0line vty 0 4 password 7 xxxx loginline vty 5 15 login!!end
Thanks in advance.Eliane,
Please remove the etherchannel port f0/24 of the switch configuration and store it in the trunk.
interface FastEthernet0/24 switchport trunk allowed vlan 1,10,20,30 switchport mode trunk switchport nonegotiate channel-group 1 mode active <<< Remove this
Configure f0 on the router as trunk I think has 877, a switchport which fe interfaces are a part of. To display the corresponding Lass on the router, that you need to configure the VLANS corresponding on the router, then only the Lass will be in a State of going / up otherwise it will be in a down state. See if that helps. Thank you, hyacinth -
Unable to ping my Guest OS-Linux - 5.8 (IP/hostname) of Host-OS: win-7
Hi all
I'm using VMWare workstation-8 on my host OS: win - 7 laptop with guest operating system: Linux OEL 5.8. But I can't ping my guest operating system (IP/hostname) of win - 7. I tried with all the bridge, NAT, host only with WMCI (active) options. I'm able to share the Folders (hgfs) between the guest os and host.
I want to access a few Oracle application of middle ware (running on reviews: Linux os) through Win-7 host operating system.
Any suggestions would be very helpful.
Machine: DELL XPS
SE host: Windows-7 (64-bit)
Guest operating system: Linux OEL 5.8
Thank you
Remy
I changed to the bridge and enable (check) "State of the repeated physical network connection.
Now I am able to ping and access Oracle Applications running on the guest operating system of the host operating system.
Thank you
Remy
-
Hello
Virtual machines guests on my host ESXi5 cannot ping each other. They can ping machines on other host. I tried to disable the firewall of windows on a computer, but other machines still cannot ping it.
I would be grateful the pointers in the right direction to allow these VMs invited to ping other machines on the same host and our network.
Robert
arptro wrote:
I tried to disable the firewall of windows on a computer, but other machines still cannot ping it.
There is really nothing in the ESXi which could prevent pings to a guest VM I think that the most likely reason is that Windows Firewall is still enabled.
What version of Windows do you use and how did you do to try to disable the firewall?
-
VMs that newly set up cannot ping the host
A few days ago vSphere VMs worked well on nested host A that was vSphere, too. Then, install a vDS and place all hosts. He because of problem that guests could not ping each other. But, other virtual machines (I mean windows OS above) can always ping the host. So, moved the hosts of the vDS and removed the vDS, the problem is there. And implemented a few new virtual machines, what operating system are vSphere, too on the nested host a. They can only ping itself, but cannot ping on nested host A, too. Then, remove the data center and set up a new. the probel is still here.
The problem should be soon after vDS, how can I solve this problem?
the configuration of these new virtual machines are inpicture.
my thought here, you forgot to activate rear promicious (security) on vSwitch0 & 1 after the migration, both of vNDS
-
2 vSpheres cannot ping each other that are built on vSphere.
On host A, which is vSpere 4.0, made up of two hosts who are vSpheres 4.0 with vSwitch. Each can ping itself, but cannot ping each other, too, cannot ping A host. After that the two hosts are moved to dvSwich, has achieved some results. But another VM on the dvSwitch is fine.
Moreover, I need to practice the vHA and vmotion. So, I need two some configuration for her guests. As a result, I built two hosts on A host.
How can I solve this problem?
Thank you!
George
George,
You must set the Promiscuous Mode to Accept on vSwitch guests (--> security properties).
André
-
Hello
I can't reach my host. What could be the problem?
I am using Vmware Server 2.0.1 Build 156745
Host: Windows XP Professional sp2
IP:192.168.146.1 host (vmnet1)
Hardware: Computer laptop Dell 630
Comments: Linux
CentOS 2.16.0
GuestIP:192.168.146.120
Comments cannot ping the host
Host cannot ping the prompt
I tried to configure the nat and the host only to connect. Nat could also be able to reach the external pages.
I appreciate any ideas
Is the fixed prompt on DHCP or IP?
What network cards do you have on the host and bridged (vmnetcfg.exe run as administrator)?
Is the physical card on the guest living/connected - sometimes to the life of a card NETWORK disconnected will no connectivity in the guest?
Have you recently changed the VMware network in the host? If so, you will need to restart the VMware services or reboot the host.
Is there a firewall clutter it?
Is the card NETWORK connected to the prompt - it shouldn't be a red cross on the network icon in the list of the material in the center of the console pane when the virtual machine is selected in the left pane?
The MAC address or virtual and physical adapters in the host and the single guest, that is not duplicated?
If all this pans, can be helpful to remove the NETWORK card in the prompt and add a. Also, what type of NETWORK adapter is it in the guest - 'flexible' or 'e1000 '? Should be 'flexible' for Linux - post (tie) the .vmx doubt customers.
--
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
Hi all
I hope you can help, this problem has been driving me crazy for some Richard now!
Firstly a bit of history... We have a Compaq ML760 running esx 3.0.1 attached to 2 SCSI disk bays. On weekends, this system was powered down by our partners to outsource in replacement of the ups in the rack. When turning the power on it we lost communication with the inverter boards... a new case, few new readers and reconstruction of the RAID the latter we have an ESX that starts in the log on screen with no obvious errors.
So, the problem is that since we cannot ping or connect to any other way of our ESX Server. Now, before that I have to go any further in my opinion, it is worth noting that I'm not an expert of linux/esx I know enough to login as root and run a few commands.
I have read several discussions around this issue and none seem to apply to my situation. Not only did I not ping my ESX, when I log into the ESX I can't ping any device, even the entry door. I had a quick glance at the configuration (should not have changed during the upgrade of the UPS!) and everything looks ok to me, feel free to correct me, the info is here:! esxcfg-NICS. JPG!
any ideas would be appreciated!
Thanks in advance,
Adam
Adam - I had a very similar problem in my test once environment. Everything was going well, all settings have been properly etc... but no connectivity ntwk. I had to remove my network config and rebuild. You can try just a little at a time to see if it works. Try to create a new vSwitch, move your top Service Console and assign a network adapter with the appropriate vlan information. See if it works then. That should give you an idea if there is a kind of corruption with the current configuration of ntwk.
This site will give you all the commands necessary to accomplish these tasks:
-
Hi all:
I have a strange problem of networking that VMware technical support has not been able to help.
Summary of the problem: comments cannot ping host unless the host is a ping command, while the guest is ping to the host
Details of the problem: I have intalled VMware Workstation 6.5.2 on the host Windows Vista Edition Home Premium (SP1). I installed several guests, including Ubuntu 8.04, openSUSE 11, Win XP and Win 2000. All guests use "bridged" network. The host has a static IP address. All guests have DHCP. All these people have the same problem - they cannot ping the host. It simply returns "Destination unreachable". However, if I run a ping from the host (it didn't ping the same customer, any ip address on the network) while the guest is ping to the host, and then will cross ping of the guest. For the next two minutes, the guest will be able to ping the host without any problem (without 'help' of the host). Then the guest will again be able ping on the host and you will have to repeat the same process. Quite strange, isn't? Another problem, I can access the internet from the hosts and guests can ping each other. (I can't access the printer connected to the host. However if the guest can ping on the host, then it can also access the printer as well.) I tried everything but still can't find the root cause of the problem. Here is a list of the things I've tried:
1. tried VMware Workstation 6.5.2 on a Windows XP computer on the same network (equipped with a wireless card intel) and did NOT have this problem.
2. firewalls, antivirus software, VPN clients, etc. were all off. It did not help.
3. the problem disappears if I use the wired Ethernet connection
4. the current wireless adapter is a D-Link, but I also tried with a Linksys Wireless card and had the same problem
5. the same problem exists also for VMware 6.5.1
6. I have installed the software VirtuaBox VM from Sun and installed the same comments from Ubuntu on the same host. The problem goes away!
7. I also tried the "NAT" networking and had the same problem.
8. I also tried DHCP for host and had the same problem.
I've tried everything I can think of and nothing seemed to help. I have filed a request for assistance with VMware tech and traded a few emails with the support guy but have not heard from him for a few days. I would really appreciate if someone can offer a few ideas to help solve this problem. I'm not a networking guru, but I'm a software engineer, so you can talk to me in technical terms.
Thank you in advance.
Yes! as noted above, it is the arp tables.
my router is assigned the same IP address for the host computer and the guest, so as soon as you ping from your host prompt, the mac and ip is back in the arp (invites) tables and from there he will communicate via newly assigned ARP table. You can check this scathing the hostname and it will be the same ip address as your guest (in my case)
I then googled arp vmware and discovered that it is familir with chipset broadcom and vmware behavior.
ARP - a displays the tables,
ARP s 00-00-00-00-00-00 192.168.x.xxx - assign the IP address to a MAC address.
I hope this helps.
-
Cannot ping a virtual machine, except on the host computer.
I have a host of SuSE, built on a chassis of IBM. It has a link for the failover interface. It has an IP of 10.10.138.196. SM 255.255.255.128. DG 10.10.138.129. I can ping this machine without problem. On that note, I have a virtual machine of SuSE. It has the same mask and gateway with an IP address of 10.10.138.197. It can ping the host (196) and the host can it ping. However, he cannot ping to the gateway by defaut.129. He receives a message Impossible to its own virtual interface. I have installation bridged networking early with no luck.
I tried to change the DG on the guest a.196. I have installation routes by default, and specific directions to 10.10.138.129 on the host and the guest without success. I talked to a few colleagues and they are not of course either. I need this available, so it can be used for a variety of applications.
You will not see a virtual NETWORK adapter for bridged interface, only for NAT and the host-only networking. There will be a device/dev/vmnet0, but that is not actually used to fill itself.
Your problem is that your bridged interface is bound to the wrong card on the host: it must be related to "bond0" not "eth0". You will need to re - run /usr/bin/vmware-config.pl to address which forces all running VMs to be stopped.
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
SMU 8135 cannot ping pc when installing labview
HJ. Help me
my laptop do not install labview 2012 can ping with SMU 8135 but labview installed on my laptop cannot ping with SMU 8135. I don't understand
Hi ffefef,
Could you explain in more detail the question, you encounter?
Thank you
Maybe you are looking for
-
It is true that FireFox is no longer support Win2K?
I received a message, allegedly from Firefox, Win2K is no longer supported. Is this true? If it is true, I can't continue to use FireFox under Win2K? What are the possible vulnerabilities? I have access to the internet via a wireless router that has
-
FIRST HP: Solving a system of linear equations with a parameter
Hello I know how to solve a system of linear equations by using a setting by hand but I don't know how to set up in the calculator. Can someone please help me solve the system of linear equations below with a 'p' on the first HP Calculator next param
-
I can receive and send the imessages but not text messages. The parameters are fixed to send and receive.sms
-
Is satellite T230 - possible to overclock?
I want to know if it's possible MY GREAT Satellite T230 FSB overclock by software apps. The core i3-330um, it's ok for the office and internet, but for CAD and applications, it took more power.Someone help me? I tried with RMclock, SETFsb and Crystal
-
Screens of friends do not show up on my watch - and other questions
I just got a 42mm Apple Watch Sports yesterday and it works for the most part very well. A couple of problems so far- I have an iPhone 6s more and it is common on iOS. I have associated my watch with her. Under the terms of the app shows I have imple