Active Directory information to join 2 forest

Similar Questions

• Active Directory - join the domain for multiple devices

  Hi all

  I need your expertise to advice me how join domain for multiple devices.

  Currently my organization have more than 10,000 computers are made up of Windows XP, 7, 8 and 10.

  We will deploy new Active Directory server in the data center.

  Currently, we plan to go every computer/devices to perform a field joints. This method will take much time to complete the 10,000 devices.

  is there another method to do this?

  is there a method that all devices will join automatically field when it is connected to the corporate network.

  Thank you.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• ACS 5.3 join two different directories Active Directory without reply in the ad.

  Hello my name is Ivan:

  I have a question...

  Can join GBA 5.3 to two different Active Directory directories that are in two different networks for the use of eap peap mschap v 2, with 2 different certificates, to authenticate users in a wireless network?

  I have

  AD 1 in the newtork with Certification Authority 1 10.25.1.0/24

  AD 2 in the network 192.168.10.0/24 with Certification Authority 2

  There is no replicate in the 14:00 users in AD 1 are totally diferent from the AD 2.

  Both of their ad I want to join my ACS 5.3.

  How can I do?

  Thanks for your replies.

  Concerning

  Here are a few things we can think in your scenario.

  >            You cannot integrate the same ACS server directly to two different areas of AD (AD1, AD2). With ACS 5.3, all you can do, establish 2-way trust between domains (AD1, AD2). This way users of the area approved by ACS installed in the local domain can authenticate. You must add a UPN or the prefix NETBIOS suffix (e.g. [email protected] / * /-name) for the user name when is authenticating with a domain (Trusted one) that the ACS is not joined to, including child domains.

  >           However, with ACS 5.4, you can join the nodes of the same deployment GBA to different areas of the AD. However, each node can be attached to a single AD domain.

  ACS 5.4 primary - domain a.

  5.4 ACS secondary - domain B

  Release notes.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.4/release/notes/acs_54_rn.html#wp71092

  >            I'm not going to give an option to integrate ACS with LDAP as an identity database because LDAP does not support Peap Mschapv2 so any object of setting up the EAP authentication will fail.

  It will be useful.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Impossible to recover information from domain Active Directory is null

  Hello

  I recently installed vmware view 5.1 in a laboratory...

  By creating a pool of the next error occurs

  Impossible to recover information from domain Active Directory is null.

  Could someone give me a help?

  Thank you...

  Did create you an account with the composer who has had access to AD?

• Is - it possible/supported to join a vCenter Server Appliance for a Small Business Server 2011 Active Directory Windows?

  Hello experts,

  I wonder if it's possible/supported to join the vCenter Server Appliance for a small business 2011 Active Directory Windows Server (basically a Microsoft Windows Server 2008 R2 Active Directory).

  Any help will be greatly appreciated.

  Thank you and best regards,

  Massimiliano

  You can... However, it would be, at least in what we saw, more easy to reach the device in the announcement via the CLI

  http://KB.VMware.com/kb/2002626

• PowerCLI script for join ESXi hosts to Active Directory

  Is there a script that I can run to join the ESXi hosts Active Directory?  I have over 100 guests that I need to join AD and want to add it script instead of using the GUI VC.

  Thank you!

  Matt

  You can browse all of your servers, but you would need to make fully automated, is get the credentials somewhere.

  You have different passwords on all ESXi servers?

  In this case, you could do something like that

  $cred = get-Credential # prompt for user and password

  Get-VMHost | Set-VMHostADDomain -ADJoin:$true -Domain$domain-Credential $cred

  If you do not have the same account/password for all servers ESXi, you want probably asked for each host.

  You could possibly temporarily store in a file and read this file.

  $accounts = @ {}

  Import-Csv "C:\accounts.csv" | %{

  $accounts [$_.hostname] = $_.password

  }

  Get-VMHost | Set-VMHostADDomain -ADJoin:$true -Domain$domain-User root -Password $accounts[$_.Name]

  The CSV file contains 2 columns, called host name and the other called password.

  We read the CSV file and store the passwords in a hash table, where the host name is the key.

  We use the hash table to fetch the password of the Set-VMHostADDomain cmdlet tree.

• Possible bug in createUserGroup action Active Directory - not informed SamAccountName as planned

  vCO 5.5.1

  I have been using the createUserGroup action of Active Directory to create a new group in AD. However, the SamAccountName does not get populated with the name of the group, rather a random string of characters. See the example below. I expect the group name (Pre-windows 2000), i.e. The SamAccountName attribute, be Test1:

  

  I wrote a blog poster illustrating the solution here http://www.jonathanmedd.net/2014/05/vco-active-directory-create-user-group-action-does-not-populate-samaccountname-with-...

  We have reported it. and there is a difficulty for her.

  We have added the new workflow that allows to update also the group name (Pre-windows 2000). It will be available in the next version of plugin update.

• View the authentication information active directory with PowerCLI

  How can I get a list of all the hosts that don't use active directory for authentication local environment using powerCLI?

  Try like this

  Get-VMHost | Get-VMHostAuthentication |

  where {$_.} Area - eq $null} |

  Select @{N = "Name"; E={$_. VMHost.Name}}

• Impossible to browse Active Directory to an ACS 5.1

  Hello

  We joined our ACS 5.1 in our Active Directory 2003, the system seems properly attached on the ACS we like connectivity status: joined and if we try with the test button we get "connection succeeded", on the AD tool, we notice that you have created a computer for our ACS account.

  We wanted to created the group directory but the navigation tool is empty and no request does not give any output.

  The ACS is joined, but we are not able to browse Active Directory.

  Any suggestions that could be the problem?

  Thank you.

  It is a matter of course due to defect mentioned below.

  CSCtf39158 - failed to retrieve ad groups in a single forest with multiple trees scenarios

  You must apply the Patch 3 for this problem

  file name: 5-1-0-44-3

  Download of: CEC / Support / download http://www.cisco.com/public/sw-center/index.shtml

  Letter: Security / identity management / Cisco Secure Access Control System / Cisco Secure Access Control System 5.1 / 5.1.0.44

  ##Steps to create the repository.

  This FAC CLI mode

  Create a repository (it's basically FTP server definition)
  AAA/admin (config) # repository FTP---> (can be any name)
  AAA/admin(config-Repository) # url ftp: / /
  AAA/admin(config-Repository) # password ordinary user

  ===============================
  Steps to install the ACS 5.1 patch:
  ===============================

  Issue the command patch GBA following in EXEC mode to install the fix of the ACS:

  ACS, install patch patch - repository name.tar.gpg repository-name

  Rgds.

  JK

  The rate of useful messages-

• ACS in the Active Directory environment

  Salvation of the forumers

  Ask,

  question 1. in the typical active directory environment and make wireless/wired authentication of 802. 1 x on the endpoints, GBA should join as a domain computer?

  question 2. for the endpoint of the domain (domain computer) join, in this case is that endpoint will approve (also computer domain) GBA?

  question 3. What happens if there is a GPO policy to install the certificate rootCA to endpoints. In this case, the ACS should deliver CSR and let the domain CA signed the certificate of identity? Am I wrong?

  Thank you

  Noel

  Noel

  Answers

  question 1. in the typical active directory environment and make wireless/wired authentication of 802. 1 x on the endpoints, GBA should join as a domain computer?

  Yes, since most of the protocols used by the endpoints is peap (eap-mschapv2) this is the only way to get this working, as ldap does not support this Protocol. If you are using eap - tls, you can choose to use AD as an LDAP store.

  question 2. for the endpoint of the domain (domain computer) join, in this case is that endpoint will approve (also computer domain) GBA?

  Once the authentication is successful (assuming that the authentication of users) the machine will have free access to the junction to the field network, if authentication workhorse of the workstation must be reached already before being put to the dot1x network. The workstation approves only GBA with the certificate for authentication, there no other information and does not know if she is part of the domain.

  question 3. What happens if there is a GPO policy to install the certificate rootCA to endpoints. In this case, the ACS should deliver CSR and let the domain CA signed the certificate of identity? Am I wrong?

  Group Policy to the endpoints for the CA root should not be a problem, but it would be better to have your sign of CA root REA ACS, if that's what you're asking. You must also enable a GPO to validate the server certificate (but I've not done this before, but I don't know that there is on which root CA trust).

  Thank you

  Tarik Admani

• ACS 5.3 - Active Directory - limiter/DCs use to auth

  Hi all

  I have a Cisco ACS server deployed for GANYMEDE and RADIUS authentication for end-users.

  Everything works fine, it is joined to the domain, most of the time people can auth. However, it seems that the ACS is trying to auth against * ANY * DC in my field.

  DNS.findsrv FindSrvFromDns runs and draws from each domain controller to use. Not all of them are accessible or not fo all of them have the same structure of the user.

  Is there a way to specify or limit/control which domain controllers are queried?

  Hello

  Unfortunately at this point there is no way to control which DC should be questioned by the AEC. The ACS will retrieve all the available DC on your AD domain name and contact one of them.

  An enhancement request is already listed and developers are working to include the feature on future versions. Here is the information:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCte92062

  ACS should be able to query only the desired domain controllers

  Symptom: Currently in 5.0 and 5.1, the ACS queries the DNS with the field, in order to get a list of all the domain controllers in the domain and then try to communicate with each other. If the connection to even one domain controller fails, the connection of the CSA to the field is declared as failed. Many clients ask about this behavior change. It should be possible to define which domain controllers to contact and/or make GBA to interpret the DNS resource records registered by the domain controller Active Directory to facilitate the location of domain controllers.  Active Directory uses the service locator, or SRV, records. A SRV record is a new record described in RFC 2782 DNS type and is used to identify the services located on a network of Transmission Control Protocol/Internet Protocol (TCP/IP). Conditionsof : Domain with multiple domain controllers were some are not accessible from the security constraints given ACS / geographical. Workaround: Make sure that all domain controllers are upward and accessible of the ACS.

  Hope that clarifies it.

  Kind regards.

• Host to Active Directory integration

  Hi, I'm trying to locate any information or not there's a vSphere license level required for the integration of commercials for ESXi hosts.  I found one of the VCP5 online documentation had answers for one of their questions of practice indicating that Enterprise Plus was a requirement with vCenter Standard edition.  No one knows for sure if it's true?

  If so, you would happen to have any documentation of license VMware which States that?

  Thank you!

  I'm not aware of this requirement and you can learn more about these links:

  Configure a host to use Active Directory in the Web Client vSphere

  Join the ESX hosts to Active Directory. VMware vSphere Blog - VMware Blogs

  What you read may be on Enterprise Plus is that any time we use Host Profiles to reset the local root password and use the host profiles you'll really need the Enterprise Plus edition.

• Password locking Active Directory - Apple ID

  In my office, we have three Macbooks linked to the Active Directory domain and all the three machines to meet the same problem. On all three machines, we use different local Admin, Mobile AD managed accounts. Accounts use private Apple ID in Itunes and App store. All three accounts have experienced what seemed to be random AD accounts locks.

  We have managed to limit somewhat through troubleshooting a problem with Apple ID and keychain.

  Users, initially created their Apple ID with their e-mails and the company when they connect to their Apple App Store ID they get locked out AD almost immediately.

  After they changed their Apple ID to their private emails, they got locked out AD whenever they tried to authenticate more than 5 times on App Store (or any where else some application requires Apple ID). Even if their identity papers have absolutely nothing to do with their usernames and passwords AD account. Somehow Apple ID or key ring tries to authenticate against AD. Whenever you enter the password wrong or correct it increments the counter "badpwdcount" of 1. If you try to authenticate five or repeatedly, causes it to lock the user of the AD because of the "5 bad passwords GPO" in AD.

  Even if the user enters a password valid, it always raises the 1 meter. If the user authenticates Apple ID with its business e-mail the lockout is immediate, which would mean the Apple itself ID forces on AD in quick succession or done something that causes lock it the user to use the e-mail AD and move. Is not question even if the pass is the same on the AD and Apple ID.

  Can you suggest what newspapers should happen to us AD to eventually find the reason that newspapers we checked that no information. Even the attribute which must display the name of the computer where the lockout was made has no information.
  We know when the lockout occur and we manage to avoid them but we would like to know why they happen. Why Apple ID, or Keychain has something to do with authentication on AD.

  We have studied this issue widely on the Interwebs and found no information that we could carry on. Locking issues revolve around a few old passwords stored on IPad and other similar positions only here on communities are way back in 2007. None of this information relates to our AD locking problems.

  We even did some heavy troubleshooting with certificates, but nothing helped.

  Someone else has the same or similar problems?

  I run several Mac Pro and Macbook Pro (El Capitan OS X 10.11.5 & 10.11.6) with the mobile AD accounts and links AD back to the domain AD WIN2012R2 server, where connection system is different from the apple ID used to access the apple store/itunes and have no problem with locked out as you describe.

  I've known a lot of problems but with "compatibility between previous versions of Mac OS X (Mavericks and Yosemite)" with WINSBS2003 then WIN2008 Server OS. Do not know what is the relationship of platform (OS X to WIN) of the software you have.

  I have found many problems have been fixed just by signing on iCloud, restart the MAC then sign in iCloud, don't know if doing the same thing could help you. The offender has generally been OS X, especially after an upgrade.

  Are your Mac related to AD, but search LDAP and NIS or too? This was one of my problems with WIN2008 and Nonconformists.

• Connection error Active Directory Windows Server R2 2012

  Hello

  That's my problem, I have two servers both running Windows Server R2 Datacenter 2012 I installed AD - DS on one of them and allow the installation to configure the DNS settings, this server is also a DHCP server. On the server I want to connect to AD, I address DNS pointing to my AD server which is 192.168.1.60 and it's also getting an IP address from the DHCP server. But it connects to Active Directory, when I try the ping command on the domain name which is yewman.email he's trying pings an external IP address (which is my public ip address because I also have the yewman.email of real estate) how to fix this? It's the mistake of connection AD:

  Note: This information is intended for a network administrator.  If you do not have your network administrator, notify the administrator that you have received this information, which has been recorded in the C:\Windows\debug\dcdiag.txt file.

  The following error occurred when DNS was questioned about the resource record (SRV) service location used to locate an Active Directory (AD DC) domain controller for the domain "yewman.email":

  The error was: "the DNS name does not exist."
  (0x0000232B RCODE_NAME_ERROR error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs.yewman.email

  Common causes of this error are:

  -The DNS SRV records to locate an AD DC for the domain are not registered in DNS. These records are automatically saved with a DNS server when an AD domain controller is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:

  192.168.1.60

  -One or more of the following areas do not include delegation to its child zone:

  yewman.email
  E-mail
  . (the root zone)

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I want to take backup of Active directory in Server 2008, Enterprise Edition. and I want to use this backup in Server 2008 R2. is this possible?

  Urgent please give me a Solution. I want to take backup of Active directory in Server 2008, Enterprise Edition. and I want to use this backup in Server 2008 R2. is this possible? If possible tell me that the process .it is a domain controller. If there is any tool? answer me. Thanks in advance.

  That you were previously informed

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-security/i-want-to-take-the-backup-of-Active-Directory-in/d7aa33cd-5a4a-40D1-BCAC-70743cd4372d

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Don