problem of flickering Y50-70.

Hello guys,.

I had this problem of flicker on my y50-70...

I discovered a few things tho,

-when im games there is no flicker.

-When I move the screen up and down the flickering increases.

-When I plug a hdmi to my computer laptop, even when it flashes on the screen of the laptop, the flicker went on the external display.

-Twinkle are pretty much weaker when my laptop is on battery, but the glitter is.

I have my drivers updated, I also downloaded the update of the BIOS by lenovo and it was not fixed.

Thanks for your help.

Hi Linerax,

Welcome to Lenovo Community

The problem would most likely come LCD connector under the keyboard. In this case, you will need to open the Lap Top and connect the cable of the LCD on the connector firmly.

For this you can refer to the below video from Youtube:

https://www.YouTube.com/watch?v=7BqVuCKew1E

Please make sure you do so carefully to avoid another question for your machine.

Kind regards

* If the problem has been resolved please mark me as solution provided to help others find the
easy solution and click on the Kudos.* *.

Tags: Lenovo Notebooks

Similar Questions

  • Video driver problem Intel Lenovo Y50-70

    So I bought a new laptop of Lenovo Y5070 yesterday without an operating system since I still have my windows 7 64 bit.

    Windows 7 64 bit is installed without problem. At the time wherever I was able to install my drivers, I couldn't through with my Intel video driver installation, so could not continue to install my NVIDIA driver either. I downloaded all the drivers of Lenovo support section compatitable.

    When I try to install the Intel video driver I downloaded from the support page, it gives me an error saying: "this computer does not meet the minimum requirements for installing the software."

    Here are the specifications of my laptop - http://notebookspec.com/notebook/5881-LENOVO-Y5070-59422156.html

    If anyone knows how I could fix this made me know.

    I had the same problem. You can download the driver directly from Intel Intel. It works and it is newer than the one that comes with your system.

    Looking for 4th generation with HD 4600 Haswell:
    https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProdId=3720

  • Omni 10 problems

    Something strange is happening with the Omni 10. More specifications with a rear camera 8 mp, some list with a 5mp camera. Office Depot data sheet shows 5 mp. According to Atmel who installed XSense as the sensor, it was not released until after 4 th December. Office Depot sold it more than a week before that date. I wonder if there was a version without notice with the screen 5mp & twinkle who was arrested almost immediately. I suggest anyone who has problems with flickering screen or camera controls on what size is the rear camera. There may be good reasons for complaint & product exchange. It looks great to me at HP did not get their act together on this tablet.

    Everyone knows "flicker" is NOT a fault/question. It's just a setting of graphics in the Panel controls intel HD that has changed. Seems to be some sort of option to save energy!

  • Satellite X 200-252 screen flickers on desktop

    Hello
    I really want to upgrade my laptop to Windows 7, I tried RC front, x 64, and x 86. Now, I bought x 64 ultimate for my desktop so I decided to try it too on Toshiba Satellite X 200-252. Everything works perfectly, except for the video driver.
    PROBLEM: screen flickers on the desktop without reason. This happens even when I do nothing, all the seconds for example just to read a pdf file or watch the nice wallpaper I.
    -with the original preinstalled Vista Home Premium x 86 I try to update display driver is more recent than the 7.15.11.7605
    -with windows XP and drivers downloaded from nVidia
    -with windows 7 all versions, nVidia drivers, tried several
    -with windows 7 drivers of Toshiba U.S. site X 205 model (cost installation, no upgrade of Windowses)
    Glitter for me means one of the following:
    -for a fraction of a second, a part of the screen deforms
    -a few lines unexpectedly appear and disappear on and off screen for no reason
    -l' screen becomes black, in whole or in part and turns on OK once again, while a few milliseconds.

    What I tried to do:
    -the ONLY driver that works correctly under vista is the original and most recent 7.15.11.7605 of Toshiba, dated June 25, 2008. NO driver work correctly under Win 7 or XP.
    -Toshiba links to the nVidia site, where I can download newer drivers - supposedly I can, but screen flickers on all windows.
    -Model drivers Toshiba X 205 for Vista or Win 7 from the Web of Toshiba U.S. site also exhibit this behavior. This product is identical to mine both chipset and gpu.
    -Toshiba Software to install - (does not include video driver anyway, as far as I could tell)

    What I expect:
    -Si Toshiba could identify all they put tweak under their "last good"original driver, it would be good to know about this, although X 205 driver did not work.
    -Also if anyone successfully installed any driver newer than one mentioned display, please leave me a comment with a version or if they had need special tips AND if the display is stable.
    -A method to test the graphics card / memory on my computer to find errors, something in memtest 86 + flavor.

    Concerning
    Krzysztof

    Hello

    The Satellite X 200-252 was equipped with the graphics card or similar, as the Toshiba P200 of Satego European PSPBEE series.
    Try the display driver released for this series too.
    Maybe you could use a driver Vista Win 7 OS.

    The drivers are located on the page of the European driver Toshiba

    Good luck

  • LabVIEW imaq flickering image

    Hello!

    My name i s Andreas and I have problem with flickering images on the screen. I tried to use the snapshot without success. I also read that you can use the node property erase images first, but the thing I have is it impossible to use because it says that

    the property is not valid for this class. the display gets imaqimages. I have to convert the images it's supports the property?

    I have attaced the file below. The screen is in the loop in order to data.

    Hello

    A proposal without the full code I guess you are the flickering image thresholding. Images works slightly differently to most cables in LabVIEW. The value on the wire is a reference to the image so that we do not round huge chunks of data. Outside of your loops, make sure to create an image for the eachstage of your image processing. Each VI Vision that you use which has a destination image must have that cable to the corresponding image you have created outside of the loop.

    The display Gets the mapping to the memory segment that has the image in it. If the picture changes then made the display. If you change the image through many operations of the display, flickers.

    Try and see if it solves the problem, if not you will have to publish the project as a whole, then we can see what is happening in the subVIs.

    Mike

  • HP 15 r250tu: Hp 15r250tu display problems

    Hello

    Recently, I bought Hp15 r250tu and since I used it, I was faced with display problems (screen flickers and shows a lot of big white pixels flickering on the screen).

    However, I have been facing this problem for browsing the web and did not face problems when using my laptop to watch full HD videos or play casual games.

    I also downloaded the Intel HD from the Hp website drivers and the problem is still not resolved.

    Please, help me to solve this problem.

    Hi @tushar_soni ,

    Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your laptop HP 15-r250tu and get an error on some Web pages or glitter. Remove temp files don't help with sites or problems with the browser.

    Cookies are small text files that Web sites put on your computer to store information about you and your preferences. You can remove these preferences by following this Microsoft document Remove and manage cookies.

    Have you tried another browser?

    Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may require the update which could cause flickering.

    I would like to know how this happens.

    Thank you.

  • Compaq cq 56 display was scrambled and intensively flickering, now no display

    Hello world

    I have a computer laptop cq56 for nearly 1.5 years. Things were fine until like the last 2 weeks, the screen started to become scrambled, flickering, and now there is no display after startup. I got the system to the factory settings and still no luck. The system has no display in safe mode too: that is to say, when it is in safe mode, after it loads some pilots, the display flashes to a white screen. The screen was flashing even when I was doing the system recovery to factory settings. No problem of flickering / scrambled when in the BIOS. It will be great if someone could help me with this problem please

    Good day people

    Hello

    Go to the BIOS and move around the screen. The spectacle of the question?

    You use an external monitor for updates to update and recovery?

  • Problem of flicker of blackBerry on Passport Passport

    The problem of flickering on the passport was still fixed with the new update?

    Thank you

    Yes

  • Prelude CC 2014 ingest window flickering

    I discovered a really weird problem today when preparing some files to import into CC 2014 prelude. When I chose a folder with files, they began loading and then suddenly started flashing. In the list next to the thumbnails of files the file flickered as well. This happened only with a few records and some do not. It didn't happen with the files on my card connected via card reader, but it happened to my internal drive and an external hard drive.

    I don't think that it has nothing to do with the location of the file, but the files in the folder.

    I think it has something to do with files that have already been the .pek files created for them.

    The problem seems to have fixed itself when I deselected the option in the preferences to record media cache files next to the originals when possible. I also clean the media Cache database.

    Here is the info for my system:

    MacBook Pro retina

    Internal hard drive SSD

    G-Tech G-Drive Mobile USB external (USB3)

    SDHC memory card plugged into the memory card reader internal

    Files in folders that have worked have a variety of .jpg, .mp4, .mov, and many others

    Files in folders that do not have were pretty much all the same files, but some already had with them .pek files or had previously been imported to the prelude or first.

    Some of the files that were in folders that worked well was created or imported in prelude or first, so I honestly don't know what the problem is. What I see happening is as prelude goes to read the files, that something is a problem, it restarts the process, repeat, repeat, repeat. I can click on 'Cancel' or select another folder and it will stop the problem of refresh/flicker.

    When I go to the folder in the Finder, while what is happening, I can see the .pek and an another one or two files appearing and disappearing as the flickering / refreshing happens in the prelude.

    Hi Retrodad,

    I'm having the same problem with flickering files in Prelude trying to ingest files after that that they were transferred to the memory card on my hard drive. All the answers from Adobe?

    Do what the previous guest tried:

    Deselect the option in the preferences to record media cache files next to the originals when possible. Also, clean the media Cache database.

    Thank you

    Kevin

  • My iPhone keeps having more than 6 lines by the top of my screen

    my iPhone 6 s more ceases to be lines at the top of my screen how to fix

    Hi Nicky,

    Which model did you - your subject line 6 more, the text says 6 s more?

    If you have a 6 in addition, there are reports more and more a problem showing flickering lines at the top of the screen. See http://ifixit.org/blog/8309/iphone-6-plus-gray-flicker-touch-death/

    (Electronics 6s is arranged differently)

  • Satellite third time laid out - how long should I keep repair?

    Hey everybody

    I have a Toshiba Satellite M300 under warranty for one year (3 months) and my screen was the problem of flickering for some time now.
    I put in the shop twice, got the LCD cable replaced, and it worked for about
    a month each time, but it keeps going wrong once again, which makes it very frustrating to get it repaired again and again.

    Is there a limit where you stop the defective same machine repair?
    And get a computer laptop replacement? Because I is not looking forward to repair each month m

    See you soon
    Shawn

    Hello

    I'm sorry to hear you have these problems with your laptop satellite.
    What say about it? All, we hope that, after the play defective, Exchange everything should be OK for a long period of time and what happens to you is really boring.

    I mean, have you tried to speak with service people and ask what can be the problem for this?
    They are trying to analyze the material and see why it happens so often. There must be a solution to all this.

  • Help the flicker of screen HP Elitebook 8460p & question flashes and upgrade.

    Greetings,

    I have a problem with my Elitebook 8460p. My old servant me service for 3 years. We have a good relationship with highes and downs. Changed hard drive, the improved Rams, monthly cleaning and etc.

    In any case; I have a problem with flickers and flashes. When I push the start of (the computer On / Off), some strange black lines appear and never went. The funny part is that the black lines, flashes / flickers become crazy when I touch the touch pad. But if I touched the touchpad of the black lines just less.

    Things I've done;

    Electrical parts Checked - no electric leakage (verified to the ohmmeter)

    I tried to run with AC and battery - nothing has changed.

    I've been handicapped ambient light sensor - nothing has changed.

    I've been disabled touchpad - nothing has changed.

    Formatting, update the BIOS to the latest version of w7 updated, no unknown device, performed stress test CPU GPU & played back & assemble nothing has changed.

    My suspicions;

    CPU because this computer VGA card integrated with CPU. Change CPU, maybe to fix any problems.

    I want to switch my computer to my choice and i7: Intel Core i7 - 2670QM.

    My booking / questions;

    Intel Core i7 - 2670QM CPU is compatible with my Chipset QM67? If it is compatible; What should I do? (Updated the BIOS, or different version of BIOS etc..)

    I have some information on this situation and my laptop.

    Video

    HP Elitebook 8460p series using Hannstar MV6 and my motherboard is same. No VGA. I will not worry the my solution. If I'm wrong; I spend my money for nothing.

    I'm waiting for your answers.

    Thank you.

    Really? No response. Thanx HP.
    I found the answer.

  • XG270HU random upper 60 Hz flicker

    I'm having a problem of flickering after buying the Acer XG270HU for the support of FreeSync.  I see random sparkle every few seconds if the monitor is operating what it is greater than 60 Hz (freesync, disabled crossfire). I created a short video showing what happens if you click on at 01:15 seconds you can see the flicker twice, just keep the video loop.  It is not always in the same part of the screen and its really random but consistent.  It does not happen when I put the display at 60 Hz, it starts to happen (even on the desktop) if the display is set to 120 or 144 Hz freesync dynamically evolving more 60 Hz.  The first part of the video I Zoom in on you show this freesync turned noting evolution Hz with the fps in the game (Final Fantasy XIV A Kingdom Reborn).

    https://www.YouTube.com/watch?v=RfRVFiH6Cw4

    Material

    Acer XG270HU

    AMD R9 290 X (catalyst 15.5 beta)

    To Display Port 1.2 using cable supplied with the Acer

    Should I send this monitor in service/replacement?

    On a whim I decided to buy another cable of DP, and well, I used the 14.12 both drivers beta 15.5 all day. I saw not a single flickering at 144 Hz since.

    http://www.Amazon.com/GP/product/B00EFDQHUU?PSC=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

    Here is the cable I bought, maybe you will have the same chance. Apparently, cable bundled with the Acer is the worst cable ever if so many people have this problem.

  • How ID USB 2 ports

    I have a desktop Dell running Windows XP Pro. When I installed a webcam, (a Microsoft LifeCam VX-5000) and plugged into a powered USB hub half lower part of the image that is displayed by the Webcam flickered. None of the webcam settings corrected this problem. I then plugged the webcam in one of the USB ports on the front of the computer, the flicker disappeared.

    The instructions say to "plug the webcam into a USB port powered", they do not specify USB 2. I wonder if the hub is not plugged into a USB 2 port. I looked in the Device Manager and cannot say if all ports are, or are not USB 2. I don't know what could cause this problem of flickering when connect to the hub.

    writing in the new message: * e-mail address is removed from the privacy... *

    I have a desktop Dell running Windows XP Pro. When I installed a webcam, (a Microsoft LifeCam VX-5000) and plugged into a powered USB hub half lower part of the image that is displayed by the Webcam flickered. None of the webcam settings corrected this problem. I then plugged the webcam in one of the USB ports on the front of the computer, the flicker disappeared.

    The instructions say to "plug the webcam into a USB port powered", they do not specify USB 2. I wonder if the hub is not plugged into a USB 2 port. I looked in the Device Manager and cannot say if all ports are, or are not USB 2. I don't know what could cause this problem of flickering when connect to the hub.

    In Device Manager, the word "Enhanced" will be in the description, as Standard Enhanced PCI to USB Controller.

    It is quite possible that the external hub is not compatible USB 2.0, or the cable from the hub to your PC isn't. Unfortunately, not all cables are created equal. If the cable between the hub and the PC is removable from the Hub, try another cable and see if that makes a difference.

    It is also possible that "" electrical"power of the hub noise interferes with the signal of the webcam.

    SC Tom

  • Dell XPS 17 702 X flicker of the screen

    I read everything I could the varrious formums and installed the drivers as much as I could, Nvida dell old and new, ancient and new, video intel old and new.  Nothing prevents the screen flickering on the battery power.

    I had the screen replaced by a dell technician, continues to blink.  The entire computer replaced and it still flashes!

    Someone at - it suggestions?  Seems that the pilots have no effect.  The only thing that works is to plug in the power adapter.  On battery, it sparkles.  I also have Nvidia to be all the time as well as the intel integrated video card without change. Technicians dell always change the power setting.  They seem obsessed with setting the screen for maximum performance on the intel integrated and the nvidea with no effect.

    Dell wants to send a new motherboard and screen.  I'm getting sick this.  The screen cannot be bad because it works on the current!  When you demand a refund?

    I like to keep it if it gets fixed I like it.

    I had the same problem of flickering on battery with my Dell XPS 702 X. After installing a new copy of Windows 7 on a new SDS drive with AG Full-HD 1080 p screen, I've updated all my drivers and use the bios A06.  That's when I saw the same problem you are having.  Since I don't see it on the old version, I searched the difference. My solution was to do a right click on the desktop and go to graphic properties and select the Advanced Mode. Click on the power tab, and then select Maximum Performance for both sector and battery.     Given that you have tried this and it did not fix the problem, you can have a bad screen.

Maybe you are looking for

  • 10 - IOS Installation error message

    My iPhone is loaded and updated iOS are downloaded to the phone.  There are 10 GB free so space should not be a problem. Software update confirms 1 update to download and it is for the iOS 10.  It shows the preview of iOS 10 features etc.  When I con

  • 1st gen tv apple loses content

    I can see my 1st Gen Apple TV in Itunes and sync movies and music from the Apple TV. On the TV, I see everything so I guess it's hard disk. I can navigate and play on TV. If I disable Itunes on my computer, I don't see any content on my TV. I get the

  • Tecra A4 - USB keys do not appear in 'my computer '.

    I recently had to restore my TECRA A4 system after a disaster, since then, usb keys do not appear in 'my computer' and aren't available to use? However, they are listed in the device under usb devices Manager and hard drives? I updated the Bios and l

  • Fuse Sansa, volume and variation

    Hi again Starts just to the right in advance at this point that when I raise the volume to about 75% + my music begins to jitter/skip. I have no idea why this is happening, it just started! Any help? Brad

  • STARTUP REPAIR RARE PLEASE HELP

    good then salvation once more I'm having problems. Well, this is my second computer. works on windows 7, and the Startup Repair cannot repair this computer. I looked through the details of the diagnosis and repair, and came across this! "root cause f