Similar Questions

• Reactivation process for System 7 due to a failure of the drive!

  I had my hard drive replaced, which held activation/approval system 7 on it security. I'm now trying to reactivate the system 7 with the same KEY # and I said it is already active and in use... And - I'm supposed to pay again for the system 7.

  Istheir an avaialable representing man/MS to guide me through this conumdrum? / / /

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• I'd appreciate it really any assitance on this, I can't save my favorites due to a failure of the system. I can access the drive crashed trhe data. Do my resident Favorites in a file that I can copy and then replace in a new installation, if so, where is

  Windows broke down and I need to reinstall Vista. So I can make a backup of my favorites, but I guess that there is a file somewhere on my crashed disk that bears this detail. If so, can I copy this file and replace in my new installation of firefox. If this file exists, I would like to know the name of the file that I need to copy and that I could find it in the directory.

  The anonymous gives path is for Vista not XP.

  The "places.sqlite" file is the file that contains your bookmarks and history. It is located in your profile folder.

  See:
  http://support.Mozilla.com/en-us/KB/profiles#How_to_find_your_profile
  Display the hidden files and folders

  In XP, the path is usually:
  C:\Documents and Settings\UserName\Application Data\Mozilla\Firefox\Profiles\xxxxxxxx.default
  ("xxxxxxxx" is a unique alphanumeric identifier)

  When you copy data from your OLD profile to your NEW profile, copy individual FILES (some require more than 1 FILE). DO NOT copy the entire OLD PROFILE folder; It will not work.

  See: recovery of data from an old profile

  Other topics: ~ ~ Red: you have installed the plug-ins with known security issues. You must update them immediately. ~ ~

  Java Update: version 1.4.2 (~ ~ Red: very old ~ ~); current version 1.6.0.20 (important update 15/04/2010)
  (Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
  (Windows users: do the update manually, very easy.)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Java Update
  Do the update with Firefox closed.

  Install/update Adobe Flash Player for Firefox: your version 10.0 r45; current version 10.1 r53 (Security important update 2010-06-10)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Flash update
  -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
  -the release of Firefox (file > exit)
  -Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
  -Double-click the Adobe Flash Installer, you just download to install/update Adobe Flash
  -When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1

  • NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
  • NOTE for IE: Firefox and most other browsers use a Plugin. IE uses ActiveX of Flash version. To install/update IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash Setup.
  • See also: http://kb.mozillazine.org/Flash ~ ~ Red:AND~ ~ How to change options to add Adobe to the list of allowed sites

• 12 c on the repository server management agent does not start due to a failure of the system

  My environment architecture for 12 c Cloud Control (used for the purpose of personal practice) can be explained as follows:

  @DBSERVER: (OEL6.5, x 86-64)

  -12 c Enterprise Manager Cloud Control (EMCC)

  -Database 11.2.0.4 which acts as a repository for 12 c EMCC

  Monitored host is on a virtual machine (VM12) which is currently in the DBSERVER:

  VM12: (OEL6.5, x 86-64)

  -12 c Management Agent which monitors host and database (12.1.0.1)

  The server worked fine for months until recently when the computer has restarted abruptly. Abrupt restart has occurred several times in the past, but this time, he had a problem when restarting. The DBSERVER when a startup starts the SGC and the AGENT. WHO starts perfectly, but the AGENT does not start. On trying to start the agent, it displays the following error message:

  [orcl11204g@dbserver bin] $. / emctl start agent

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Starting Agent... failed.

  Manager of target failed to startup: targets.xml was rejected: loaded with a token incorrect agent

  See emctl.log and emagent.nohup in: / home/u01/oemrel3/agent/agent_inst/sysman/log

  [orcl11204g@dbserver bin] $

  The targets.xml file contains the following information, which do not seem to be of any help:

  [orcl11204g@dbserver emd] $ cat targets.xml

  <? XML version = "1.0"? >

  <>targets

  < / objectives >

  [orcl11204g@dbserver emd] $

  Anyone can provide assistance in such circumstances?

  The DBSERVER repository database, the auditor and the who are running, while the agent is down. VM12, listener and agent database is running. Is there another file that should be checked for more information?

  --> $/ AGENT_INST/bin/emctl stop agent

  If the agent does not stop is free then kill all the background process agent first grepping for agent perl and java process only

  --> Move your existing target.xml file

  MV target.xml target.xml.old

  --> Create an empty file targets.xml under/AGENT_INST/sysman/MDTs with the below content

  --> Start the agent of

  $AGENT_INST/bin/emctl start agent

  That starts agent but without all the targets in targets.xml

  To the discovery of targets saw agent console resynchronization

  Concerning

  Krishnan

• Failure of the program

  I use Windows 10 and the Cloud of Photoshop version. When I try to use the eyedropper tool, for example, there is a window that says that the eyedropper tool are unusable due to a failure of the program (I use the Finnish version, so I don't know if it translates to English exactly the same). The PC that I use is powerful and works well, and this problem was not last week. Someone knows what's the problem? Thanks in advance.

  reset your preferences, https://forums.adobe.com/thread/375776

• Domain Services Active Directory could not create the ntds object due to dns settings look for failure on the specific domain controller

  Forest consist of 1 DC server 2003 with all fsmo and 2000 1 domain controller roles.

  Completed all questions of adprep and when I tried to promote server 2008 standard edition to a domain controller, had the error message stating that Active Directory could not create the NTDS settings for the domain active directory CN = NTDS controller

  Settings, cn is 2k8dc1, cn = servers, cn = Default First Site Name, c is Sites, cn = Configuration, dc is Marie-France, dc = com on the ad distance dc server2.amanua.com.

  To ensure that the provided network credentials have sufficient permissions

  "The DSA operation unable to act because of the failure of the dns lookup"

  The idea was to demote the 2000 machine when I completed the installation of 2008.

  Hello

  You can display the query in the link provided to improve assistance:
  http://social.technet.Microsoft.com/forums/en/categories/

• Cannot install the program, the error message: Server error 145905 [invalid header] communications failure

  Original title: communication failure 145905 [invalid header]

  When you try to install a program I always get this error each time message: Server error 145905 communication failure [invalid header] would appreciate any help that anyone can provide. Thank you.

  Hello

  That is the application that you are trying to install?

  I suggest you follow these methods and check.

  Method 1: Run the hotfix to correct the following problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Perform the clean boot, try to install application.

  Follow the suggestions of this link.

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

  If the problem is specific to the program, I suggest you please contact the manufacturer of the program for utilities.
   

  I hope this helps!

• "A communication failure has occurred" when you transfer the file in Simulator

  I'm under Blackberry MDS Services 4.1.2 and using device Blackberry 9530 Simulator Simulator.  v4.7.0.75

  -Only the Blackberry browser is an option on this Simulator.

  -The Web page is a form that has an input file browse that selects an image file on the Simulator.  The form sends, but after 20-30 seconds, it seems to start timing and finally returns the error message below.

  -The same Web page works on a real device of Blackberry 9530 Storm without error.

  Error:

  A communication failure occurred with the chosen Mobile Data Service. The server may be busy, please try again later.  If the problem persists, contact your administrator.

  http://www.w3.org/1999/xhtml">
  
  
    
    
  
  
  
  
    
    
  
  
  
  
  Upload
  
  
  * Required field.
  
  
  
  smith, john
  
  
  1111 JAMES DR, New York, NY, 44444
  
  
  9234HH111111 (Property)
  
  
  Effective 02/14/2009
  
  
  
    
  
  
  
  
  File *
  
  
    
  
  
  
  
  Type *
  
  
  
    
  PHOTOGRAPH
    
    
  CLUE REPORT
    
    
  OYSC BUNDLE
    
    
  NY VEH INSPEC
    
    
  AGT FILES
    
  
  
  
  
  
  Desc
  
  
  
  
  
  
  
   
  
  
    
  
  
  
  
  
  
  
  
  ©2009 Insurance Company. All rights reserved.
  
  
  
  

  Support or ideas are appreciated.  Thanks in advance.

  Blueinc good tip.  I noticed that you were using the MDS of the JDE 4.7.0:

  C:\Program search in Motion\BlackBerry JDE 4.7.0\MDS

  I had been using the MDS for the stand-alone package of RIM:

  C:\Program 4.1.2\MDS search Motion\BlackBerry Email and MDS Services Simulator

  As soon as I tried the JDE 4.7.0 MDS, it worked without making any changes of rimpublic.property!

  So it seems that the bug is with 'BlackBerry email and MDS Services 4.1.2 simulators' MDS.  Thanks for pointing me the finger inadvertently in the right direction!

  Would be nice if RIM could fix the own MDS.

• So, my computer has a virus moneypak and ontop of the said virus pro safety. And I can't download any anti-virus scan malware to get rid of them due to my failure of security scanning.

  So, my computer has a virus moneypak and ontop of the said virus pro safety. And I can't download any anti-virus scan malware to get rid of them due to my failure of security scanning. So I went to check on my Microsoft Security databases to see what is happening, and it will not even open! Whenever I click it, it says "You don't have the right permission to open" (my security essential has been like that for maybe a week now. and I just received today two viruses) while I try to uninstall, but it won't allow me because of something not having the right to access and contact an administrator. So I can't open the MSE, can't uninstall it, can not download any virus anti-malware to get rid of the moneypak and pro. I'm so lost, please any suggestion on what I can do to fix my computer would be greatly appreciated!

  Original title: help!

  Try the rescuecd kasperskyor avg rescuecd

  If you get the ISO, you'll need a blank CD and

• CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both d

  CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both dng and arw.  Ideas.

  Try the following:

  In the Camera Raw window, press Ctrl + K (Cmd + K on a Mac) to bring up the preferences.

  Uncheck the box processor graphics use.

  If that suits him, update your graphics driver may allow you to work with the checked graphics processor.

• How to generate restarted VM list due to the failure of the host

  Some on give can the powercli or script command to generate restarted VM list due to the failure of the host

  Here is a good Article for your condition that perfectly fits in. http://www.jonathanmedd.net/2012/03/which-vms-restarted-after-a-vsphere-ha-event.html

  You can also go ahead and check it out via vcenter browser journal as well. Using the vSphere PowerCLI or Web Client to identify affected VMs after failure of the host - YouTube

• HA installation failure due to a misconfiguration in the host network configuration?

  We have no setup problem on a cluster HA containing 2 ESX 4.0 host. However, after adding a host ESXi 4.1 and configuration HA to contain all 3 hosts, HA shows failure due to a misconfiguration in the network configuration for the ESXi 4.1 host host.
  
  Remembering this bad spell names network could cause a failure of HA configuration, we proceed to rename network management Service Console host ESXi 4.1 in order to match the network management of the ESX 4.0. However, this does not.
  
  ESX and ESXi are able to mix in a HA cluster in the first place? Any advise?

  crescendas wrote:

  ESX and ESXi are able to mix in a HA cluster in the first place? Any advise?

  Hello

  Yes, you can mix ESXi and ESX on this same cluster

  1. Check your DNS - should resolve to long and short names of all nodes in a cluster that you
  2. are the new ESXi in the same IP subnet as the older ESX servers?
  3. try to disable and enable HA
  4. Check below link
     http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1001596&sliceId=1&docTypeID=DT_KB_1_1&dialogID=213574287&StateID=0%200%20213576136

  Good luck

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• Problem with Activation of Smartphones from blackBerry due to an update on the network (Bell Canada)?

  Hey guys, first post here.

  I'm from my tour of BB, excellent camera and everything. I live in the Canada and I'm with Bell. When I had the clerk told me that he would be activated within 24 hours. After the call to return the next day because it never happened, I had to appear in the store and the lady told me that because 'they' (she was talking about Bell or Blackberry? Not sure) had updated the network for blackberry devices all activations that subsequently spent going through.

  She told me that they were aware of the problem and I should have my operational service within 48 hours.

  I wonder if you guys know something she doesn't. Is this true? Is there really a bug with the system and the BB devices with the Bell network or she didn't know what was going on the devil?

  Thanks in advance!

  Simon

  Thanks for the reply,

  I ended up having to set myself up with technical support on my landline... The Lady at the store screwed to the top of all of this, mix 2 numbers in my phone number and my phone how to associate a plan obsolΦtes that never been used on blackberry devices, never... go figure.

  Now, everything is smooth. Thanks for me! ;-)

• Satellite A350D-10Y - failure of the external graphics card?

  Hello guys,.

  I have a toshiba Satellite A350D-10Y and I get some sounds of the sound system of the laptop, but a kind of Mermaid on the mother, accompanied by lights driver dvd, map emitte acoustics is two short beeps. I'm getting these two short beeps loops within a period of 5 seconds +-.

  I downloaded a video for you, to listen to the sound emitted by the MB, in the end you can hear better because you get less noise from the cpu fan:

  Feature of the motherboard: ATI external graphics card

  Things I've done:
  -Remove the battery and try to put on without it.
  -Switch of RAM on the slot a RAM
  -Clean cpu fan one its exhaust
  -Change is the motherboard on a new

  Now, the problem was taken up to, or is the processor or the external graphics card.

  I think that the problem of the graphics card, because if these was a problem of the processor, I'd get the audio system of the laptop beeps and not a buzzer next to the MB.

  Can anyone here help me?

  From my point of few it of not possible to say what s wrong with the laptop without running certain diagnostic tests and check the part.

  The often shorter and emits a beep when turning procedure appears due to the POST (power on self-test) failure.

  This essential POST routine determines the available memory real quantity and checks for the presence of required hardware components.
  In case one of the hardware components would be defective, the power on self test could not be transmitted correctly and the laptop would begin to create some beeps.

  If you are sure that the modules of memory so that the card mother isn't affected, then one of the pieces referred to as CPU / GPU can be the troublemaker.

• Failure to the final control of Oracle CRS stack. 10 on the first node.

  Hello world
  
  I tried to install a RAC Oracle 10 g on Oracle Enterprise Linux AS release 4 2 (October 7 update), but I'm having this problem
  
  root@fporn01 crs #./root.sh
  Check to see if Oracle CRS stack is already configured
  
  Set the permissions on OCR backup directory
  Setting up NS directories
  Configuration of the Oracle Cluster registry upgraded successfully
  clscfg: version Setup detected EXISTING 3.
  clscfg: version 3 is 10 G Release 2.
  Award of fporn01 default hostname for node 1.
  Award of fporn02 default hostname for node 2.
  Successfully accumulated necessary OCR keys.
  Using the ports: CSS = 49895 49896 EVMC = SRC = 49898 and EVMR = 49897.
  < nodenumber > node: nodename > < private interconnection name > < hostname >
  node 1: fporn01 fporn01-priv fporn01
  node 2: fporn02 fporn02-priv fporn02
  clscfg: Arguments help you get success.
  
  NO KEYS WERE WRITTEN. Power - setting force to override.
  -force is destructive and will destroy any previous cluster
  Configuration.
  Oracle Cluster registry cluster has already been initialized
  Startup will be queued to init within 90 seconds.
  Adding to inittab demons
  Expected CRS demons to be in place within 600 seconds.
  Failure to the final control of Oracle CRS stack.
  + 10 +.
  
  Forget the names!
  
  but on the second node everything went well, so I don't know that this is not a connectivity problem.
  the iptables service is stopped and disabled
  check the results after you run the root.sh script
  
  root@fporn02 ~ # /u01/app/crs/root.sh
  Check to see if Oracle CRS stack is already configured
  + / etc/oracle does not exist. Create now. +
  
  Set the permissions on OCR backup directory
  Setting up NS directories
  Configuration of the Oracle Cluster registry upgraded successfully
  clscfg: version Setup detected EXISTING 3.
  clscfg: version 3 is 10 G Release 2.
  Award of fporn01 default hostname for node 1.
  Award of fporn02 default hostname for node 2.
  Successfully accumulated necessary OCR keys.
  Using the ports: CSS = 49895 49896 EVMC = SRC = 49898 and EVMR = 49897.
  < nodenumber > node: nodename > < private interconnection name > < hostname >
  node 1: fporn01 fporn01-priv fporn01
  node 2: fporn02 fporn02-priv fporn02
  clscfg: Arguments help you get success.
  
  NO KEYS WERE WRITTEN. Power - setting force to override.
  -force is destructive and will destroy any previous cluster
  Configuration.
  Oracle Cluster registry cluster has already been initialized
  Startup will be queued to init within 90 seconds.
  Adding to inittab demons
  Expected CRS demons to be in place within 600 seconds.
  CSS is active on these nodes.
  fporn02
  CSS is not active on these nodes.
  fporn01
  Node local verification.
  Run the root.sh on the remaining nodes script to start the demons of the CRS.
  
  It is the newspaper of crs on the first node
  
  root@fporn01 bin # cat /u01/app/crs/log/fporn01/alertfporn01.log
  + 17:27:37.695 + 2009-06-24
  customer (9045) CRS-1006: / u02/oradata/orcl/OCRFile_mirror location of the OCR is inaccessible. Details in u01/app/crs/log/fporn01/client/ocrconfig_9045.log.
  + 17:27:37.741 + 2009-06-24
  customer (9045) CRS-1001: OCR has been formatted using version 2.
  + 17:28:24.544 + 2009-06-24
  customer (9092) CRS - APB - rac configured with nodes fporn01 fporn02 1801:Cluster.
  
  It is the newspaper of crs on the second node
  
  root@fporn02 ~ # cat /u01/app/crs/log/fporn02/alertfporn02.log
  + 18:09:09.307 + 2009-06-24
  CSSD (16991) CRS - 1605:CSSD file to vote is online: / u02/oradata/orcl/CSSFile. Details in u01/app/crs/log/fporn02/cssd/ocssd.log.
  + 18:09:09.307 + 2009-06-24
  CSSD (16991) CRS - 1605:CSSD file to vote is online: / u02/oradata/orcl/CSSFile_mirror1. Details in u01/app/crs/log/fporn02/cssd/ocssd.log.
  + 18:09:09.310 + 2009-06-24
  CSSD (16991) CRS - 1605:CSSD file to vote is online: / u02/oradata/orcl/CSSFile_mirror2. Details in u01/app/crs/log/fporn02/cssd/ocssd.log.
  + 18:09:12.441 + 2009-06-24
  CSSD (16991) CRS - 1601:CSSD complete Reconfiguration. Active nodes are fporn02.
  
  I rechecked the remote access / user equivalence
  
  After execution of the command here OCRCHECK have this information
  
  root@fporn01 bin #. / ocrcheck
  Status of the Oracle Cluster registry is:
  Version: 2
  Total space (in kilobytes): 262144
  Used space (in kilobytes): 312
  Amount of available space (KB): 261832
  ID: 255880615
  Device/file name: / u02/oradata/orcl/OCRFile
  Verifying the integrity of file/device succeeded
  Device/file name: / u02/oradata/orcl/OCRFile_mirror
  Verifying the integrity of file/device succeeded
  
  Checking cluster registry integrity succeeded
  
  on the second node, I get the same result
  
  root@fporn02 bin #. / ocrcheck
  Status of the Oracle Cluster registry is:
  Version: 2
  Total space (in kilobytes): 262144
  Used space (in kilobytes): 312
  Amount of available space (KB): 261832
  ID: 255880615
  Device/file name: / u02/oradata/orcl/OCRFile
  Verifying the integrity of file/device succeeded
  Device/file name: / u02/oradata/orcl/OCRFile_mirror
  Verifying the integrity of file/device succeeded
  
  Checking cluster registry integrity succeeded
  
  I have reviewed the following metalink notes, but none of them seem to solve my problem
  
  * 344994.1*
  * 240001.1*
  * 725878.1*
  * 329450.1*
  * 734221.1*
  
  I made a low of research from many forums, but failure is always on the second node, but my failure is on the first node.
  I hope someone could help me.
  
  It's the output of cluvfy
  
  Conducting due diligence to install cluster services
  
  Audit accessibility of node...
  
  Check: Accessibility of node of the node 'fporn01 '.
  Accessible destination node?
  ------------------------------------ ------------------------
  fporn01 Yes
  fporn02 Yes
  Result: Check accessibility node from node 'fporn01 '.
  
  Verify the equivalence of the user...
  
  Check: Equivalence of the user for the user 'oracle '.
  Comment by node name
  ------------------------------------ ------------------------
  fporn02 spent
  fporn01 spent
  Result: Use equivalence CONTROL passed to user 'oracle '.
  
  Checking administrative privileges...
  
  Check: Existence of user 'oracle '.
  User name of node are comments
  ------------ ------------------------
  fporn02 Yes
  fporn01 Yes
  Result: Use CONTROL existence increased for 'oracle '.
  
  Check: Existence of group 'oinstall '.
  Name of node status group ID
  ------------ ------------------------
  fporn02 is 501
  fporn01 is 501
  Result: Check existence for "oinstall" group
  
  Check: The user 'oracle' in group 'oinstall' primary members
  Name of node user is group is user in the main group comment
  ---------------- ------------
  fporn02 Yes Yes Yes Yes past
  fporn01 Yes Yes Yes Yes past
  Result: Membership check for user 'oracle' in group 'oinstall' as primary past.
  
  Past check administrator privileges.
  
  Verify node connectivity...
  
  Interface of the node information to "fporn02".
  IP address subnet of the interface name
  ------------------------------ ----------------
  eth0 10.218.108.245 10.218.108.0
  eth1 192.168.1.2 192.168.1.0
  
  Interface of the node information to "fporn01".
  IP address subnet of the interface name
  ------------------------------ ----------------
  eth0 10.218.108.244 10.218.108.0
  eth1 192.168.1.1 192.168.1.0
  eth2 172.16.9.210 172.16.9.0
  
  Check: Subnet node connectivity "10.218.108.0."
  Source Destination connected?
  ------------------------------ ----------------
  fporn02:eth0 fporn01:eth0 Yes
  Result: Verification of node connectivity for subnet "10.218.108.0" with one or more nodes fporn02, fporn01.
  
  Check: Subnet node connectivity "192.168.1.0.
  Source Destination connected?
  ------------------------------ ----------------
  fporn02:eth1 fporn01:eth1 Yes
  Result: Verification of node connectivity for subnet "192.168.1.0" with one or more nodes fporn02, fporn01.
  
  Check: Subnet node connectivity "172.16.9.0."
  Result: Verification of node connectivity for subnet "172.16.9.0" with one or more nodes fporn01.
  
  Interfaces adapted for private interconnection on the subnet "10.218.108.0":
  fporn02 eth0:10.218.108.245
  fporn01 eth0:10.218.108.244
  
  Interfaces adapted for private interconnection on the subnet "192.168.1.0":
  fporn02 eth1:192.168.1.2
  fporn01 eth1:192.168.1.1
  
  ERROR:
  Could not find an appropriate interface for the VIP range.
  
  Result: The node connectivity test failed.
  
  Check the system requirements for 'Sir '...
  
  Check: Total memory
  Name of node available comment required
  ------------ ----------
  fporn02 7,93 GB (8310276 KB) 512 MB (524288 k) transmitted
  fporn01 7,93 GB (8310276 KB) 512 MB (524288 k) transmitted
  Result: The total past memory check.
  
  Check: Disk space in "/ tmp" dir
  Name of node available comment required
  ------------ ----------
  fporn02 9.57 GB (10037300 KB) 400 MB (409600 KB) transmitted
  transmitted fporn01 GB 9.55 (10012168 KB) 400 MB (409600 KB)
  Result: Check the free space on the disc passed.
  
  Check: Swap space
  Name of node available comment required
  ------------ ----------
  fporn02 from 1 GB (1048576KB) of 8,81 GB (9240568KB)
  fporn01 from 1 GB (1048576KB) of 8,81 GB (9240568KB)
  Result: Checking space last Swap.
  
  Control: System Architecture
  Name of node available comment required
  ------------ ----------
  fporn02 i686 i686 spent
  fporn01 i686 i686 spent
  Result: Audit had system architecture.
  
  Control: Kernel Version
  Name of node available comment required
  ------------ ----------
  2.6.9 - 2.4.21 - 15EL spent 78.0.0.0.1.ELhugemem fporn02
  2.6.9 - 2.4.21 - 15EL spent 78.0.0.0.1.ELhugemem fporn01
  Result: Last kernel version control.
  
  Check: Existence of package for 'do-3, 79 '.
  Name of State comment node
  ------------------------------ ----------------
  fporn02 make-3, 80 - 7.EL4 spent
  fporn01 make-3, 80 - 7.EL4 spent
  Result: Package checking for 'do-3, 79 '.
  
  Check: Existence of package for ' binutils - 2.14.
  Name of State comment node
  ------------------------------ ----------------
  binutils - 2.15.92.0.2 - 25 fporn02 spent
  binutils - 2.15.92.0.2 - 25 fporn01 spent
  Result: Package checking for ' binutils - 2.14.
  
  Check: Existence of package for "gcc - 3.2.
  Name of State comment node
  ------------------------------ ----------------
  fporn02 gcc - 3.4.6 - 10.0.1 spent
  fporn01 gcc - 3.4.6 - 10.0.1 spent
  Result: Package checking for "gcc - 3.2.
  
  Check: Existence of package for ' glibc - 2.3.2 - 95.27.
  Name of State comment node
  ------------------------------ ----------------
  fporn02 glibc - 2.3.4 - 2.41 spent
  fporn01 glibc - 2.3.4 - 2.41 spent
  Result: Package checking for ' glibc - 2.3.2 - 95.27.
  
  Check: Existence of package for "compat-db - 4.0.14 - 5.
  Name of State comment node
  ------------------------------ ----------------
  past fporn02 compat - 4.1.25 - DB9
  past fporn01 compat - 4.1.25 - DB9
  Result: Package checking for "compat-db - 4.0.14 - 5.
  
  Check: Existence of package for "compat-gcc-7, 3 - 2.96.128.
  Name of State comment node
  ------------------------------ ----------------
  lack of fporn02 failed
  lack of fporn01 failed
  Result: Failure of the existence Package control for "compat-gcc-7, 3 - 2.96.128.
  
  ++ Check: package of existence "compat-gcc-c++ - 7.3 - 2.96.128" ++
  Name of State comment node
  ------------------------------ ----------------
  lack of fporn02 failed
  lack of fporn01 failed
  ++ Result: failure of packet existence check for "compat-gcc-c++-7, 3 - 2.96.128. ++
  
  ++ Check: package of existence "compat-libstdc ++ - 7, 3 - 2.96.128" ++
  Name of State comment node
  ------------------------------ ----------------
  lack of fporn02 failed
  lack of fporn01 failed
  ++ Result: failure of packet existence check for "compat-libstdc ++ - 7, 3 - 2.96.128. ++
  
  ++ Check: package of existence "compat-libstdc ++ - devel-7, 3 - 2.96.128" ++
  Name of State comment node
  ------------------------------ ----------------
  lack of fporn02 failed
  lack of fporn01 failed
  ++ Result: failure of packet existence check for "compat-libstdc ++ - devel-7, 3 - 2.96.128. ++
  
  Check: Existence of package for "openmotif - 2.2.3.
  Name of State comment node
  ------------------------------ ----------------
  openmotif - 2.2.3 - 10.2.el4 spent fporn02
  openmotif - 2.2.3 - 10.2.el4 spent fporn01
  Result: Package checking for "openmotif - 2.2.3.
  
  Check: Existence of package for "setarch - 1.3 - 1.
  Name of State comment node
  ------------------------------ ----------------
  fporn02 setarch-1, 6-1 adopted
  fporn01 setarch-1, 6-1 adopted
  Result: Package checking for "setarch - 1.3 - 1.
  
  Check: Existence of group for "dba".
  Name of State comment node
  ------------ ------------------------
  fporn02 are past
  fporn01 are past
  Result: Check group existence for "dba".
  
  Check: Existence of group 'oinstall '.
  Name of State comment node
  ------------ ------------------------
  fporn02 are past
  fporn01 are past
  Result: Check existence for "oinstall" group
  
  Check: Existence of user "nobody".
  Name of State comment node
  ------------ ------------------------
  fporn02 are past
  fporn01 are past
  Result: Use existence CONTROL passed to "nobody".
  
  Failure of the system requirements for 'Sir '.
  
  Check prior to the installation of cluster service failed on all nodes.

  We thank you for your comments ;)

  If you advise/etc/inittab file... don't ' forget to uncomment (that's run when the system starts)

  #h1:35:respawn:/etc/init.d/init.evmd run > / dev/null 2 > & 1
  fatal #h2:35:respawn:/etc/init.d/init.cssd > / dev/null 2 > & 1
  #h3:35:respawn:/etc/init.d/init.crsd run > / dev/null 2 > & 1

  TO

  H1:35:respawn:/etc/init.d/init.evmd run > / dev/null 2 > & 1
  H2:35:respawn:/etc/init.d/init. Fatal CSSD > / dev/null 2 > & 1
  H3:35:respawn:/etc/init.d/init.crsd run > / dev/null 2 > & 1

  By the way... Have fun and take advantage of Oracle RAC ;)