Failure of the program

Similar Questions

• HP Officejet 6500 - failure of the program

  I seem to have this problem with ALL my computers. That means that I tried on a XP computer, two Vista computers, and a Windows 7. This problem appears EVERY time.

  So I can print (from my computer windows 7) without the necessary drivers. However when I try the driver he appears as the wireless can not be found! I would like to be able to use the scanner function, I'm an artist, so it would be wonderfully helpful. I bought this printer because it had a scanner.

  It will ask you the IP address of the printer, I'll put it (correctly) and he'll STILL say it does not find my printer. I'm puzzled.

  I have disabled all firewall, there is nothing blocking the printer.

  I don't have a cord. I bought this printer for the wireless fuction.

  It all started one day when all computers stop printing house, I think it's a problem of hardware synchronization, maybe how to reset my printer (hard reset, not only turn off my power) would do the trick. I don't know, but it makes me completely crazy and makes me not want to buy a HP printer again: T

  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  It is your printer?  What did he say?

• Cannot install the program, the error message: Server error 145905 [invalid header] communications failure

  Original title: communication failure 145905 [invalid header]

  When you try to install a program I always get this error each time message: Server error 145905 communication failure [invalid header] would appreciate any help that anyone can provide. Thank you.

  Hello

  That is the application that you are trying to install?

  I suggest you follow these methods and check.

  Method 1: Run the hotfix to correct the following problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Perform the clean boot, try to install application.

  Follow the suggestions of this link.

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

  If the problem is specific to the program, I suggest you please contact the manufacturer of the program for utilities.
   

  I hope this helps!

• Photosmart 3210 all in one: Scan and reinstall the program failures

  Printer isn't online and firewall is on and no network.  Printer and scanner going good since 2006 until I tried to scan a negative, I think for the first time in its history.  Scan bar will quickly about 2 inches and lamp turns off and printer says to stop, but this isn't.   Had to unplug, but printer would reset with all functions (except movie option).  Uninstalled and reinstall failed with the error situation code 03215762.  Print function works with other programs and copy function works, just can't sweep, and there is no solution Center, could not reinstall.  Resettlement goes to 2% with the status - stop services - bogs and Print Spooler Service and will remain bogged down for hours until the end with the Task Manager.

  During the forced relocation ends and said deleting files, another error situation code 06458626 comes up with a few lines comes from installation error logs.  Help would be wonderful.

  Due to personal obligations, could not work on reinstalling printer until this week.  Put a link to MS and I've tried suggestions there - .NET updates, enter the registry and delete some files and a work-around suggested without success.  Next I googled "Can not stop spooler on MS XP SP3" and as choice went to forums.techguy.org/windows-xp/897775-can't-stop-spooler.html, Harry 32, January 28, 2010.  This guy had a sounding similar problem and his solution worked.  MS Fax in windows, computer components unchecked rebooted, went to spooler MS services, stop selected, and he stopped.  YES!  Then I ran the new drivers you sent and installed the program without glitches.  YES, once again! (actually when install stopped and said spooler was arrested and I wanted it to be fixed and started then the installation can continue; naturally, I selected Yes.)  I scanned a photo, printed and made a copy successfully.  However, I tried again to scan a negative from the solution Center and the button on the Panel of the printer without success.    I'll close this as 'select solution' and start a new discussion of assistance on the issue of negative scan.  Very gratedful for all your help.  I'd never know what Google if you had not discovered in troubleshooting spooler problem.

• [SOLVED] - Thunderbird constantly crashing, especially when you use Add Ons Manager, but sometimes just at the point where the program remained open.

  Hello

  I used Thunderbird earlier today, when the power is in my neighborhood. Given that the power was restored Thunderbird has been crashing early and often. I can't get the program to open unless I have rename or delete the folder "extensions" in ~\Library\Thunderbird\Profiles\ < profile name >

  It will fail immediately if I go to tools-> Addons. Finally it will crash just sitting just opened in the background. I have attached the accident below report. I'm on OSX 10.10.1

  I tried to remove and reinstall Thunderbird (to both the current and previous version)
  I have tried repairing permissions
  I tried to use Time Machine to restore the entire profile folder from before the failure.

  Any suggestions? I use Thunderbird for years and I'm very uncomfortable with it, but he might switch to the mailbox if I can't solve this problem.

  Thank you.

  AdapterDeviceID: 0 x 6720
  AdapterVendorID: 0 x 1002
  Modules: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:31.3.0
  BuildID: 20141127140543
  CrashTime: 1419384832
  EMCheckCompatibility: true
  EventLoopNestingLevel: 1
  FramePoisonBase: 7ffffffff0dea000
  FramePoisonSize: 4096
  InstallTime: 1419372200
  Notes: AdapterVendorID: 0 x 1002, AdapterDeviceID: 0x6720GL layers! GL context? GL context + GL layers +.
  ProductID: {3550f703-e582-4d05-9a08-453d09bdfdc6}
  ProductName: Thunderbird
  ReleaseChannel: press release
  SecondsSinceLastCrash: 22
  StartupTime: 1419384814
  Theme: classic/1.0
  Ramjet: 1
  Seller:
  Version: 31.3.0
  useragent_locale: en-US

  This report also contains technical information about the State of the application when it crashed.

  Hi djunknown0, I'm not very familiar with Thunderbird crashes, or the Mac platform, but I noticed that just before accidents Thunderbird tried to run what is called 'fbplugin' and there is a bug report corresponding referring to the "Facebook Photo Uploader' of problems on Yosemite. You will find this add-on and either disable or delete it?

• customize the toolbar does not and the program crashes

  When I right click in the area at the top of the screen to customize the toolbar, customize the window appears. When I click in the window I immediately get error message 'Customize Toolbar (not responding)' and the program hangs and I have to close Firefox.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can also check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Firefox can not be updated and do not be installed (no action after unpacking the file or the program update)

  Hi all

  I was unable to update Firefox since Version 17.0, each update attempt failed. The automatic update feature still reported that the update has been without success/failure, then download the new version of Firefox and then try to install it simply leads to inaction after unpacking (running the file). Now, I tried to address this problem by uninstalling firefox and then install the new browser. However, I'm back to where I was decompresses the file and then nothing happens. I am very frustrated as I like the browser and I can't use it anymore. Before, Version 17.0 worked well for me, I simply couldn't be updated. I checked my firewall (windows) and my anti-virus (avast free) program and the program is not blocked, so I simply do not know why I can not update and (re-) install. I would appreciate any solution

  Disconnect for security. Use the SafeMode clean Windows, but from the F8 key. See if you can install Firefox.

  • http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  I wonder if somehow, security software is always blocking the installation. Consider temporarily uninstall if necessary security software. No doubt other .exe files run (or I doubt you could do a lot with the computer) and this isn't a problem with file associations have been corrupted.

• Calendar hangs with the beginning of the program

  Hello

  Since my last update of Mac OS in 10.11.2 my calendar is not more open. Immediately after double calendar by clicking (start), the standard error message is displayed and the program is closed (down).

  I tried following solutions so far:

  1. Restart--> without success
  2. Check the reviews of the community--> any solution to find

  An expert can help analyze and solve the problem?

  Thanks in advance,

  Bora

  Safe Mode boot removes the system caches that can help after an OS X update.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key. You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  
  

  Try again your calendar.

  On Safe Mode

• "Database corrupt installation" - discovered after failures repeat the installation of automatic updates of Windows

  We're running out of WinXP SP3.  Apparently, we are unable to install/uninstall anything correctly.  I think it may have something to do with "a basic installation damaged."  I got this error when trying to manually install KB972581 (a security update for 2007 Microsoft Office System).  This could have been caused by running the Windows Installer cleanup utility, I didn't have problems with Office 2007.  We were informed at all by continuing to upgrade with another program issues.

  We daily use Outlook 2007.  Multiple users, so we can't delete it.

  Same thing with KB970895 (update of security for SQL Server 2005 Service Pack 2) - another failure with the description of the error "Unable to install Windows Installer MSP file".

  Basically, the automatic updates of Windows always fail.  Comprehensive research of these forums, I found and ran the Microsoft FixIt! # 50202, without result.

  How can I fix anything that makes things installation fails?

  I had a similar problem - resolved two things actually. First make sure yu have the latest windows installer engine. Then download the package fails and run interactive mode. This will give you the 'real' error which causes the failure so that you can correct it.

  In my case it was a dependency on another file system that was resolved by running sfc/scannow - it's maybe not the question you... once again, run the full installation package and also to enablehttp://support.microsoft.com/kb/223300 logging to track down issues...

• my windows xp computer started and gave me a new identity. all my files are missing. Is it possible to recover them? The programs are still on the system.

  The computer worked fine last night.  This morning, after entering the password journal, xp started up the generic wallpaper and invited me to learn the features of windows xp.  the programs seem to work.

  Looks like your user profile is damaged.  I hope that you do not use the built-in account named "Administrator".

  If the administrator account is not corrupted, it is available in XP Home restarting the computer in Mode safe.  In XP Pro, you can get on behalf of administrator mode without failure or by pressing CTRL-ALT-DEL twice at the 'Welcome' screen.

  Assuming that you can get an account with administrator privileges, administrator or another account that you have created and which has administrator privileges, see http://support.microsoft.com/kb/811151

• The instruction at "0x6280436a" referenced memory at "0x0a055284" memory could not write click on OK to terminate the program.

  The instruction at "0x6280436a" referenced memory at "0x0a055284" memory could not write click on ok to terminate the program.

  Some programs that you have running is a failure. You have to find what it is that you can take appropriate measures such as uninstall/reinstall the program if it is legitimate. The first thing to do is to always make sure that the computer is free of viruses/malware:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the computer is clean, you can use a combination of Process Manager, the Configuration system, AutoRuns and boot in diagnostic mode utility to find out what is running and otherwise.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  You can get Process Manager from the same link from Sysinternals above.

  Clean boot in Windows XP - http://support.microsoft.com/kb/310353
  Boot minimum troubleshooting Windows XP - Advanced http://support.microsoft.com/kb/316434

  MS - MVP - Elephant Boy computers - don't panic!

• I WENT TO THE PROGRAMS TO FIND M YSERVICES IF I COULD TURN ON MY SECURITY SYSTEM, BUT MY SERVICES FILE DOES NOT CONTAIN HOW DO I GET IT BACK

  MY SECURITY CENTER HAS TURNED OFF, I WENT INTO THE CONTROL PANEL TO TURN BACK BUT I COULDN'T SO I WENT

  PROGRAMS TO LOOK TO HIGH SECURITY CENTER AND IT WASN'T WHAT I DO AND HOW TO GET BACK MY SECURITY CENTER

  Hello

  Please do not post in all capitals!

  We have ro try and read it

  _______________________________________________________

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/products/malwarebytes_free

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ______________________________________________________________

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• everything I try and tells me that I have not assicated file with the program and it is not true, what should I do?

  IF I TRY AND OPEN, VIEW, DELETE, DOWNLOAD, WHATEVER. I GET A MSG OF ERROR THAT SAYS THAT THE FILE IS NOT AN ASSOCIATION TO PERFORM THE TASK AND TO SET FILE ASSOCIATIONS IN THE PANEL.  \THIS IS NOT TRUE  AND EVERYTHING?  I CAN'T DO A SYSTEM RESTORE YET.

  Hello

  We need the name of the program/s you are trying to open or the file extension of / them

  and a viewer, or a program must be installed on your computer to open a specific extension

  see if that helps;

  How do I... Change file extension associations in Windows Vista?

  http://www.TechRepublic.com/article/How-do-i-change-file-extension-associations-in-Windows-Vista/6172036

  and if you can't do a system restore which is the error message?

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• When I press on DELETE opens the program of support for hp and shift caps lock is enabled...

  When I press DELETE button help HP and support the program opens and the caps lock is on, also when I press the superficial for example. left button "qe" appears and when I press the right button the calculator opens... my laptop is compaq presario cq57 running windows 7 home... Thanks in advance...

  Hello again jeffrey27.

  It is difficult for me to say what would be the price of disks (as much as you are in a country other than mine).  However, it should be a minimal cost and a good thing to have a system failure such as having to replace a hard drive.

  I don't think using another PC to create a recovery disk is an option.  The disks are specific system (it might have small differences in the two booklets), and also may not be valid under the license agreement for Windows.

  I think it's information about your location.

  

• failure of the system after the installation of windows 7 upgrade advisor

  original title: failure of the system after the installation of the Advisor to upgrade to windows 7, which now, I can't delete

  My Winows Vista worked fine until I downloaded the windows 7 upgrade advisor - the system crashed, only load windows in safe mode, and when I try to delete the Upgrade Advisor program, it tells me windows service install is not available...

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  .

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner