ActiveX control installation steps

Similar Questions

• Impossible search updates invites to install the ActiveX control to continue the installation of updates

  Original title: could not find ActiveX control so I can install it. Tried to understand the instructions, but no luck

  I need to check the updates, but it tells me that I must install ActiveX Control . He tells me to right click just below the address bar of IE, but I can't yet find it.

  Windows or Microsoft update should give you a small download

  you asking if you want to installation, we are not or should not have box

  looking for him... In addition, open options internet (Control Panel), the Security tab.

  Open the L.Click on the icons (one at a time), select "Default settings",

  Then Privacy tab sites, type microsoft.com & allow, close when through...

• How can I activate the appearance of the information bar for the purpose of the installation of the ActiveX controls?

  Windows XP SP3 32-Bit Kaspersky Pure 2.0, IE8. I try to run Windows Update or Microsoft. The "check for Updates" returns very briefly and I get the message that I need to install the ActiveX control to run the update. I see clear instructions right click of the 'information bar' and follow the instructions.

  My problem is I do not have the information bar and have spent hours trying to allow him or have it Update ActiveX to recognize appear to be installed. Thank you.

  Internet Explorer 8 information bar: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-GB/help/a7a14db1-f0ce-40b0-a8ee-3c2df2ffd8121033.mspx

  Check your settings to make sure that it is not off.

  • Open Internet Explorer by clicking on the button start , and then click Internet Explorer.

  • Click Tools and then click Internet Options.

  • Click the Security tab and then click Custom level.

    • Do one or two of the following ways:

    • To disable the InfoBar for ActiveX controls, scroll to the section ActiveX controls and plug-ins from the list and then, under prompting for ActiveX controls, click Enable.

  • To disable the InfoBar for downloads, scroll to the section of downloads from the list and then, under prompting for file downloads, click Enable.

  • Click OK, click Yes to confirm that you want to change, and then click OK again.

  If your settings are set as above, then the information bar stops.

• installation of activex control

  I tried to install the activex control, it won't let me. He says that windows has blocked this software because it can't verify the Publisher. I had it installed before that I did a format of hard drive and now it won't let me

  I tried to install the activex control, it won't let me. He says that windows has blocked this software because it can't verify the Publisher. I had it installed before that I did a format of hard drive and now it won't let me

  I received this PA bear MS MVP when I was unable to install ActiveX. Scroll down and follow the instructions for IE7. Yes same IE7 if you use IE8. I hope that the method works for you.
  http://emailsupport.spaces.live.com/blog/CNS! 5D6F5A79A79B6708! 6203.entry? a = 764721021
  When this is done, try again to install ActiveX.

  t-4-2

• ActiveX controls disappear when VI is loaded in a subgroup of experts with the use of the modal to start dialog box

  Hello

  I have a secondary to a VI (VI1) in which one another VI (VI2) is charged. VI1 is used as a module for an Action step in TestStand. Vi2 has controls ActiveX as ExpressionEdit and Adobe PDF reader etc. VI1 VI2 in charge in a subgroup of experts and calls Dialog.vi Modal start. I put 'Show the front panel when it is called' true to VI1 so that the VI appears when the sequence is executed. During the execution of the sequence and when the VI begin dialog is called VI1, all controls ActiveX VI2 (loaded in the Sub-group of experts) modal disappears. Here is the screenshot of the façade of the VI1 operating sequence:

  

  This problem occurs in TestStand 4.2.1 TestStand 2010 and TestStand 2010 SP1 (for as far as I tested it.) May occur in older versions too). In the attached file, VI1 is 'ExprEdit Test.vi' and VI2 is 'SubpanelLoad.vi '. The sequence attached is developed in TestStand 2010 SP1.

  How can you solve this problem?

  Thank you

  Ganesh Kumar

  Hi all

  Found the solution to the question . The problem is that the front of the VI in which start Modal Dialog.vi is used should not be open before start Modal Dialog.vi is called. In the files that I have included in my previous post, .vi ExprEdit Test (does not work) had the ability to 'See the façade when it is called' enabled in the properties of VI. It was the origin of the problem. When I disabled this option, all started working well (ActiveX controls do not disappear during the execution of the sequence). I had accidentally turned off in .vi ExprEdit Test (work) that worked. A comprehensive review of the differences between the 2 screws led to find the cause of the problem.

  Thank you

  Ganesh Kumar

• ActiveX control in CVI Edit substep

  I'm under CVI 2010 (10.0.1.419) and TestStand 2010 SP1 f1 (4.5.1.144).

  I came across a problem today and I know that I must be missing something easy. I am trying to create a step with a stage to change type. The lower level change called a CVI function to its module code. The CVI function opened a panel that contains an ActiveX control.

  When I try to use the lower level edit (by clicking the button in an instance of the step type), I got an error that the DLL cannot be loaded. Changing the setting of adapter CVI to run the steps in an external Instance of CVI let me see that ICB receives an ERROR of EXECUTION NO DEADLY that 'ActiveX controls cannot be created in a thread which the concurrency model is apartment multithreaded (MTA).

  I know that Edit substeps are supposed to use STA threads (there is a post of Doug somewhere around here... ah, here). So I did not know what went wrong. I created the simplest example I could think of nothing else than a control IE WebBrowser on a Panel in a .uir and still have the same error.

  More strange is that I got the error When you run one of the TestStand examples! I tried the example \Examples\StepTypes\CVI\HP34401a and got the same error:

  NON-FATAL RUN-TIME ERROR:   "c:\...\StepTypes\CVI\HP34401a\HP34401aStepType.c", line 356, col 5, thread id 0x00001694:   Library function error (return value == -176 [0xffffff50]). ActiveX controls cannot be created in a thread whose concurrency model is multithread apartment (MTA)
  

  There must be something I am doing wrong, or an option that is out of order. Any ideas?

  -J

  Change substeps are executed in a threaded so executed in the process. If you are running in an external CVI, then you will get a MTA thread. You probably don't want generally be run some edit sub-steps in a CVI outside themselves, that is why there is a checkbox "Always run in the process" on the CVI module specification table (I recommend to all developers step using CVI modules for substeps type use this setting for all of their sub-stages). Your original question was probably unrelated to the COM threading model I recommend that you debug and debug the process of with CVI seqedit.exe rather than your modules running in an external CVI.

  Hope this helps,

  -Doug

• Microsoft Access with ActiveX control problems

  I did a bit of research on this topic and have found several answers that are nearby, but do not address my real problem.

  I would use ActiveX control Microsoft Access, especially to create new database files without having to copy an empty file that I've stored somewhere I also can't stand it when I don't get something to work, so it's now something personal also.

  Anyway, when I run a simple VI to open the reference can be created, Access._Application, I get the error: "error 3005 occurred at the opening of the Automation: object specified is not can be created in Access.vi. I have tried many of the common responses to this problem, such as navigation for the library in ActiveX window and try to save it with regsvr32, but the file is msacc.olb, which cannot be registered with regsvr32.exe. I have attached the original VI and I tried on 3 different PCs, all with slightly different installs of Office, but with Access 2007. If anyone can help me understand this point, I would be very happy.

  Thank you

  Your vi made the same error on my machine.  Then, I removed the Access._Application reference, click right on the reference entry and chose to create a control.  Then I changed the Active-X class by accessing my version of reference computers ("Access._Application.12").  The same vi took place without error.

  The class is still shows as Access._Application, which indicates that there may be an incompatibility which is not visible.

  When and activeX node does not work when copied from any other machine, it is recommended to replace each node that is generating the error and reselect the properties and methods.

• ActiveX controls

  I get this message pop up Internet Explorer for each Web page, I'm going to: do you want to allow software such as ActiveX controls and Plug-Ins to run?  If I click on no, my computer still right on the same page. I recently downloaded Adobe Flash Player so I can play Bejewled Blitz on Facebook and that's where the problem seemed to start.

  Hello
   
  ActiveX controls are small programs, sometimes also referred to as "Add-ons", that are used on the Internet. They can improve your browsing experience by allowing animation or they can help with tasks such as the installation of the updates from Microsoft Update security.
   
  Some Web sites require you to install ActiveX controls to view the site or perform certain tasks in this regard. When you visit one of these sites, Internet Explorer asks if you want to install the ActiveX control.
   
  If the name (Name.dll) ActiveX control is not added to the list of controls pre-approved in Internet Explorer 7. The prompt to install the same thing happens.
   
  Here are some links to that for more information related to the same please refer:
   
  What is an active control?
  http://www.Microsoft.com/protect/terms/ActiveX.aspx
   
  Information bar Internet Explore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-information-bar-frequently-asked-questions
   
  Message in the information bar in Internet Explorer 7 when you browse a Windows SharePoint Services 3.0 site or to a SharePoint Server 2007 site: "the Web site wants to run the following add-on:"Name ActiveX Control"
   
  http://support.Microsoft.com/kb/931509
   
  If the method above has not fixed the problem and you have tried all possible methods to resolve the problem without success I suggest trying to perform an optimization of Internet Explorer on your computer and check for the issue.
   
  How to optimize Internet Explorer
   
  http://support.Microsoft.com/default.aspx/KB/936213
   
  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Error "ActiveX controls accept only fonts defined in GraphicsUnit.Point."

  Original title:

  I have a HP 7310 all-in-One and I get the error message; ActiveX controls accept only fonts defined in GraphicsUnit.Point. Parameter name: fonts

  I use a Dell laptop. How to fix it.

  Hello

  1. Once you get this error message?

  2 have you made any changes to the computer, before the show?

  Method 1:

  Run this fixit and check.

  Diagnose and automatically fix problems printing and printer

  Method 2:

  Uninstall and reinstall the printer drivers and check.

  Step 1: Uninstall the printer drivers.

  a. click on your "Start menu", then "settings", then "printers and faxes" menu.

  b. right-click on the printer icon and select 'delete '.

  c. access the menu of "Server Properties" in the menu drop down "File" at the top of the window. Select the 'Drivers' tab at the top of the window. This will display all the printer drivers installed on your computer.

  d. highlight the printer driver that you want to delete by clicking on it once. Click on the button "Delete" under the list of drivers. Click 'Yes' in the context menu to remove the driver. Repeat this step to remove drivers that are additional, if necessary.

  Step 2: Install the drivers for the printer from the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=391182

  See also,

  Resources for the resolution of the printer in Windows XP problems

• I can't find the info bar or install the activeX control

  I'm trying to update microsoft windows, and this happens every time. When I try to right click on where the information bar is supposed to be located,

  under the address bar, it never shows me "click on Install ActiveX Control". Also, it does not I'm in the InfoBar area. I tried several times to complete this process and can not. How can I get this installed activeX control? Thank you

  Install the ActiveX control required to view the site The site is not correctly displayed on your computer without this control. To install it: 1 right click on the Internet Explorer information bar. It is located just below the address bar. 2. in the context menu, click install ActiveX control. 3. in the security warning dialog box, click install. Note: If the information bar does not appear, or if you have installed the control but still cannot use the website to take these steps to solve the problem. Example: Internet Explorer information with the menu bar

  Hello

  1 did you do any hardware or software change before the show?
  2. where you can install windows updates before?

  I suggest you try the steps mentioned below.

  Method 1: Fix the term.

  Troubleshoot Internet Explorer to IE quick, safe and stable:
  http://support.Microsoft.com/mats/ie_performance_and_safety/

  If the problem persists, perform the following step.

  Method 2: Optimize Internet Explorer and check to see if it helps.

  How to optimize Internet Explorer:
  http://support.Microsoft.com/kb/936213/ro

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this information is useful.

• ActiveX Control of Notepad ++

  Dear community OR,.

  I have a small question.

  I would like to play a bit with Notepad ++ ActiveX, and I wonder if it is possible to use it as within the VI ActiveX control. I have installed and registered Notepad ++ ActiveX plugin, but I can't find an instance of this class through ActiveX container.

  Has anyone worked with him, please? Maybe, someone know solution, how to integrate it on the front VI?

  Thank you very much in advance!

  Sam_Sharp wrote:

  Notepad ++ actually there an ActiveX control, or is it just an ActiveX programming interface? If it's just the last, then there is nothing to put in an ActiveX container.

  I assume that this is only an ActivX Interface?

  -Notepad ++ 6.8.8

  -Plugin ActivX 1.1.7.3

  -2015 LabView

  After the installation, open a new vi and press ctrl + shift + b to open the class browser

  

  the default value is the server of VI

  you will need to change this to ActivX > SELECT LIBRARY

  I guess that the library Notepadd ++ is 'NppActiveXPluginTypLib Version 1.0 '.

  

  

• ActiveX control error: your current security settings prohibit running ActiveX controls on this page.

  Original title: problem with Activex controls

  I m trying to open my scanner program, but windows shows me the below msg: Please help me solve this problem...

  one or more activex controls couold appears no not because either:

  (1) your current security settings prohibit running ActiveX controls on this page.

  (2) you have blocked an editor of one of the controls.

  As a result this page may not display correctly.

  Hi euriskofiles,

  The problem may occur if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

  Steps to follow:

  (a) click Start, click run, type regedit, and then click OK.

  (b) expand the following registry subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

  (c) in the right pane, right-click right 1200and then click change.

  (d) in the value data box, type 1, or 0 to replace the existing value of 3. Then, click OK.

  Note If you type 1 in the value data box, you receive the following message when you start Microsoft Project:

  You want to allow software such as ActiveX controls and plug-ins to run?

  In addition, you receive this message at other times when you use Microsoft Project. If you do not receive this prompt, type 0 in the value data box.

  The values 0, 1 and 3 are associated with the following behavior:

  o 0 = on, or the action is possible

  o 1 = Prompt

  o 3 = disabled, or action is not allowed

  (e) exit the registry editor.

  See if that helps. Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't use Microsoft dates. He tells me to "Install ActiveX control" BUT

  I have everything that I can't use Microsoft dates.  He said "Install ActiveX control" but the instructions or take the following steps to solve the problem is to work for me.  I had the bulk of security installed for some time, but my PC is really slow and stop the little pop ups of what risk etc occur.  I ran the security scan, microsoft set the scan, the malicious software removal tool and the free antivirus, antispyware and they all return that there is no problem.  I need to get the ActiveX control Setup so I can receive all the dates at the top.  Can some one please give me advice on how to do it.  Thank you very much in advance, Ms. ESP :>)

  Is this the same computer as in this thread more early of yours? -Online http://answers.microsoft.com/en-us/ie/forum/ie8-windows_xp/getting-webpage-error-details-user-agent-pop-up/a09f3911-5e9d-4176-86d6-55edf1d78a9e

  And this one? -Online http://answers.microsoft.com/en-us/protect/forum/protect_scanning/my-windows-online-scranner-window-just-appeared/b1a41787-0658-44fe-b6be-66ce46316215

• Help with Windows XP. Your security settings do not Web sites to use ActiveX controls installed on your computer.

  Original title: help with Windows XP.

  I have a laptop with Windows XP. When I try to go on homepage e-mail he says I have no internet connection, even if I do. Also, I can't run windows update. A pop up as my security settings will not allow active x but don't give me any option to change as I've seen it before. I tried everything I can think of.

  Hi SteveKey,

  ·         You use Internet Explorer to access these sites?

  ·         If so, which version?

  Method 1: Run automated troubleshooting and check if it helps.

  Improve performance and security in Internet Explorer

  Method 2: Check to see if the following is useful.

  a. open Internet Explorer.

  b. Select tools, then Internet Options in the menu at the top of the Internet Explorer window. The Internet Options window opens.

  c. Select security from the list of tabs at the top of the Internet Options window. The Security tab appears.

  d. click on the custom level button. The security settings window opens.

  e. scroll down to download signed ActiveX controls entry and select the quick option.

  f. scroll down to Run ActiveX controls and plugins entry and select the active radio button.

  g. Select the OK button to accept the changes. You may have to restart Internet Explorer for the settings to take effect.

  Method 3: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

• Missing Activex controls

  Adobe Flash Player does not work on my PC.  I'm running Win7 and IE8.  I think it has something to do with Activex controls.  When I try to load Flash Player it is said Activex is not present - and then does not load correctly.  When I IE, tools, manage modules, I see not 'Shockwave Flash Object' which I believe is an add-on required for Flash Player install and work properly.

  How do I get the Activex that seems to be missing or if I need to download Adobe Flash Player - what it prevents download?

  I have a relatively new PC and I do not think that it has never worked properly.  I need Flash Player to work properly to display the sermons of the Church to which we belong.  Any help would be appreciated.

  Hello

  Try the suggestions below to troubleshoot the installation of Flash player.

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Hope that information was useful