Impossible search updates invites to install the ActiveX control to continue the installation of updates

Similar Questions

• I just bought a Logitech Web c110 camera and every time I try to install the installer crashes. Also, I was making the blue screens with different messages on them.

  Original title: how to find missing or corrupt files on windows xp pro

  I just bought a webcam logitech c110 and whenever I try to install the installer breaks down and I was doing the blue screens with different messages on them... How to scan for missing or corrupted files?  My brother-in-law has built this computer for me and I did not all disks for windows xp pro. system that is on it

  Hello

  1. you receive an error message while trying to install the webcam? If so, then post back the exact error message.
  2 are you able to install any other software?

  Try to capture the error message on blue screen and after return the exact error message. This could help us help you better.

  Step 1: Try to install the webcam software in clean boot state and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Z820 - BIOS updated to v2.55 - cannot start or install the installation of Windows 7 (UEFI) disc

  Hello

  I have serious problems with the boot and install Windows 7 on my Z820.

  My problems started with Windows Boot Manager, throwing an error in the boot, saying that "the Windows Boot Configuration data file is missing required information". In the end, I decided to do a full clean reinstall of WIndows. However, I was unable to get Windows 7 installed. I was able to boot the disc at retail of Windows 7 64-bit UEFI mode, but he had problems with the installation. Each attempt ended with an error stating that 'Windows could not update the configuration to start the computer. Installation cannot continue. ».

  It was the BIOS v2.08. Intel 520 (240 GB) SSD as boot drive and 2 TB SATA HARD drive as data disc on the ports of controller LSI 2308 0 and 1 respectively. 2 DVD players on Intel AHCI ports.

  I decided to take a different path.

  I removed my data HDD and a DVD of the Z820 player. I put my SSD (which will become the startup disk) and a DVD player on both ports to AHCI.

  I've updated the Z820 BIOS with the latest version (v2.55, February 13, 2013), did a reset CMOS (machined cable disconnected) and reset the BIOS to factory default settings. Then, I put 'OptionROM mass storage' mode EFI and the storage on AHCI mode.

  Now, when I put in retail Windows 7 SP1 64-bit installation DVD and select the drive of DVD (UEFI) to start, I get just a flashing dash. I noticed also that some fans begin immediately turn faster.

  To summarize:

  I am unable to boot Windows 7 SP1 64 bit DVD installation detail at all and therefore impossible to install Windows 7.

  Configuration of the system (as in the last installation attempt):

  -Dual Xeon E5-2680

  -32 GB OF RAM DDR3-1600 PC3-12800

  -240 GB SSD IDE AHCI Intel oucederomsurlesecondport 520

  DVD player - Harbour AHCI

  -NVIDIA Quadro 4000

  -BIOS v2.55 (OptionROM in EFI, Secure Boot disabled mode mass storage)

  I'm getting desperate... ;-)

  Should I try reseating the RAM modules? Remove some RAM? Connect my monitor differently (currently DVI to VGA)? Replace the graphics card?

  Kind regards

  Dries

  In the safety device is the LSI controller set to device available and under device options is Donwload ROM option enabled.
  
  If they are both correct so I would say that your MB doesn't have, I got 3 failure already on my 6 systems! Not been more reliable work stations to this day.
  
  For intergatting search device & patches for WinToolKit, I can share my images because they contain information about the company & registered software.

• Impossible to copy and paste after the installation of updates

  Installed the updates this morning and now unable to copy a Web page and paste it in microsoft works. Can I use another program, but I'm not a happy camper. It tells me that I should not always immediately install new updates due to problems of this kind. I got burned by updates in the past, but it has been awhile. Everyone must wait at least a week or two before you install these updates.

  Hi Edw276

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Sorry to hear that you are having problems after an update.  In order to help you further, we would require a bit more information.

  What you are trying to copy and paste in the works?  What steps do you take to do this?

  When you try and copy, the copy function appears if you right click on the selected text?

  Do you receive an error message when you try to copy and paste?

  You can copy from another application, such as Notepad in the works?

  Let know us the answers and we can continue to troubleshoot from there.

  Kavita M
  Microsoft Answers Support Engineer
  Visit the Microsoft Answers Feedback Forum site
  and let us know what you think.

• Impossible to uninstall silverlight to install the most recent version, and not a windows package valid

  Microsoft silverlight

  cannot uninstall the previous version of silverlight, I think, to install the latest version. error open. Check that the patch exwhen I try to remove this package_correctif add/delete error shows could not be ists and that you can access it, or contact the application vendor for veerify that it is a valid windowpackage. s hotfix install. also do not know how to check to see what my computer is if it's 65 bits or bits 35

  Hello

  · What is the exact error message that you receive with the error code as appropriate?

  You can see the links below and try the steps and check if it helps: http://www.microsoft.com/getsilverlight/Get-Started/Install/uninstall-arp-win.aspx

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer: http://support.microsoft.com/kb/2438651

  If this is not enough, then I suggest you to send your application in Silverlight forum for assistance on the issue: http://forums.silverlight.net/forums/13.aspx

  Note: To check the version of Windows installed, you can follow the steps from the link below: how to determine whether a computer is running a 32-bit version or the 64 bit version of the Windows operating system: http://support.microsoft.com/kb/827218

• Impossible to uninstall Skype to install the latest version

  Skype continues to stop so I contacted Skype's Chat service and the suggestion was I have seem to have 6.3 V and the most recent is 6.16 delete the existing one and install the one latesy except that I can't uninstall it it keeps hanging with the uninstall box original I may have a problem with the computer in general because I also have problems with the installation of dvd programs and downloaded programs I just hade the computer OS (W8) reinstalled after an accident and I detected that he had not been improved to 8.1 this can fix things because something can have not set correctly all the ideas?

  This has now been resolved by opting for the 8.1 that needed to be done as my Builder installed only 8

• IE 11 with EBS 11i invited to install the J2SE Plugin again and again

  Hello

  We test EBS 11.10.2 with Internet Explorer 11 on Windows 7 and during the passage to forms, it will prompt you to install the J2SE Plugin, even if it is already installed. If we go ahead and re - install through the command prompt, we get the same prompt the next time. Anyone encountered this? I see in doc 285218.1browsers recommended for Oracle E-Business Suite 11i that there are tasks to apply

  (19917350, 18675861, 19879617, 20064202, 19513755). Does anyone know if one of these hotfixes solve the problem?

  Thank you.

  Yes, you must have all the patches of pre - req. applied and you must ensure that JRE is deployed based on the (Doc ID 290807.1).

  Thank you

  Hussein

• Error when trying to install the Installer Cleanup utility

  Get the following when you try to install the Windows Installer Cleanup utility:
  Script: C:\... \IXP000. TMP\StartMsi.vbs
  Error: Permission denied
  Code: 800A 0046

  Source: Microsoft VBScript runtime error

  Hello Stepheen Beslin,

  Try the following to see if it helps.

  To resolve this problem, you must install The Windows Installer Cleanup utility as administrator. To do this, right click on the Setup file (msicuu2.exe) and chooserun as administrator. If you are prompted for an administrator password or for confirmation, type your password, or clickcontinue.

  Please answer back with an update on your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "Download and install the installer itunes 64-bit instead!"

  Hello. try to download itunes... pop - up box "this itunes Installer is designed for 32-bit Windows version, please download and install the itunes 64-bit Installer instead"

  Please help me I don't know how to do the same thing

  Thank you

  Well you go back to the apple website and download/install the 64 bit version and not the 32-bit version (run first the DiskCleanup)

  http://support.Apple.com/kb/DL1047

• How to use or install the installer 64 bit on Windows 7?

  Try to install Microsoft Lync 2010 but when I select 'YES' to allow program to make changes to my computer, I get the following response: this Setup is not supported on your computer. Please use the 64-bit Installer to complete the installation of Microsoft Lync 2010.

  There are two installation for Lync programs, 32 and 64 bits, use the proper architecture of Windows 7, you are running. In this case, Windows 7 64 bit.

  Download and install this trial 64 bit version and use your activation key you have.

  http://www.Microsoft.com/download/en/details.aspx?ID=10400

• Upgrade Photoshop CS5 but re-installing the installation hangs

  After a restoration of the system, in an attempt to re - install my Photoshop CS5 on my Windows 7 PC, it remains at a standstill.  It reached a point where the "install now" does not move, but the "Total remaining time", continues to rise, have tried to get this installed for two days.  At one point 'Total remaining time' had reached more than 800 minutes with 5% full.  On this last attempt to install, he went up to 296 minutes with 15% full, and then kept fluctuating up to 280 minutes 14% then up to 305 minutes 15% complete.  At this time I just let it run.  Before he was at a standstill with the help of Adobe, now it's at a standstill on Adobe Air.

  I have restarted this facility several times, uninstalled and reinstalled my previous versions of Photoshop, and tried again.  Made sure all other programs/applications are closed and my internet connection was solid.  I don't know what to do or try next.  From now to 337 minutes still 15% Complete and always on Adobe Air.

  I gave it one more try and note here for others that may encounter the same problem, how I was finally able to install Adobe Photoshop CS 5.

  When you get to the screen to select what to install for Photoshop CS 5, if as in my case, you have the 64-bit, do verify THAT the 64-bit (if the 32-bit is checked to remove the check mark) and remove the check mark from Adobe Air.  This does the trick and will install properly.

  I noticed at the guarded facility is at a standstill has either using Adobe or part of Adobe Air installation.  I think that it is possible that because I already had the air latest Adobe on my computer (I have 5 other adobe products) that she, in other words, "caused an insurmountable difference of opinion between the installation and the computer".

  I do thank you very much for your time and try to help solve this problem.

• An installation package for the software aio 02 of the ps product cannot be found. How to find or install the installation package?

  Windows Vista Ultimate 32-bit

  Message appears at the beginning upward.

  Accompanied by msg: try installtion again using a valid copy of the installation package 'ps_aio_02_software.msi '.

  and: the component you are trying to use is on a network resource is unavailable.

  and: click OK to try again or enter a different path to the folder containing the installation package 'ps_aio_02_software.msi '.

  I don't know what function I am using.

  Unfortunately, I am not very computer.

  Any help would be appreciated!

  Thanks in advance

  Joe

  Hello

  It seems to be to do with the HP software.

  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/PS-AIO-02-software-MSI-error-on-boot-up/TD-p/2218373

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/uninstalled-a-program-I-shouldn-t-have-Windows-Vista/TD-p/219859

  And this HP link explains different .msi errors:

  "" The component you are trying to use is on a disk that is not available"or a similar Message appears on the computer in Windows.

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01631295

  See you soon.

• Impossible to hide or to install the cumulative time zone for the operating systems Windows Update

  February 2010 cumulative time zone update hourly for the Windows operating systems will be set up not to go when I hide it and tell him to mind yet.

  Shows daily for about 2 months and never works.
  Stop sending me useless updates that won't install!

  1. stop the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > %windir%\SoftwareDistribution (enter) > [OK]
  Open the download folder and delete its contents
  Close the window.

  3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck the box/deselect KB979306 and hide ("don't show me this update").

  4. start the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Start
  (Starting the service will take a moment)

• Live messenger guard inviting to install the latest version of flash player installed but

  Original title: live messenger problem

  When I go into the live messaging chat it keeps popping up a message on my screen saying I need a newer version of adobe flash player to get things to work, but I already have the latest installed. When I press the link to update, it sends me to a page that does not exist. I tried deleting and reinstalling live messenger 2011 and do the same thing with flash player, but will not remedy the situation. Any help would be appreciated. Before an answer... Thanks for any help.

  Hi josephcropper,
   
  I recommend you post your query in Windows Live Messenger Forums for assistance with this issue.

• Impossible to download and to install the 3.5 framework.

  I am trying to download Framework 3.5 on windows 8, so I can download windows movie maker, but it want let me download or install, please help!

  Hey there will I know exactly what I did but I downloaded a pack of service for the 3.5 and then downloaded the 3.5 framework and it worked, thank you all very much for helping me with this!