Activity CustomSMS - settings of the gateway

Similar Questions

• DNS settings for the intranet server is not not a DNS

  I have an OS X server that services the on the local subnet (behind a NAT).  We have moved to a new office and installed a new firewall / local DNS and all other machines can resolve names of local computer.  But the OS X Server solves only them to the machine gateway/firewall, rather than solve them for local machines.

  If I disable the server App DNS, resolved names.  But I seem to remember that I'm not supposed to do disable the OS X Server DNS, set it instead to forward requests to the gateway.  Unfortunately the Google Machine isn't helping me, because every sentence google I can think on OS X Server and DNS settings show how to use your OS X Server as a DNS server for the computers on your network - which is not what I want to do!

  Which, in my view, should run is listing the gateway as a forwarding server, then tell machine OS X to "Search for only some clients" and "The Server itself" selection in the dialog box "Edit Search Clients.  But it does not work.

  Any help appreciated, thanks.

  Two things you need to do:

  You must configure the host/domain name on the server and/or point the DNS address in the network preferences for 127.0.0.1

  Once you tell the server to perform searches in its own recursive cache/internet to 8.8.8.8 * or your dns public server here *, then it stops to pass requests to the gateway.

  Then set your DHCP server to serve IP addresses in DNS (10.0.0.5) servers to clients.

  Example:

  * Client DHCP address request *.
  10.0.0.10 - IP
  255.255.255.0 - mask
  10.0.0.1 - gateway
  10.0.0.5 - DNS

• Tecra A10 - cannot change the settings of the BIOS with supervisor password enabled

  Hello
  I activated a supervisor for 1.50 acpi BIOS password.

  Since then, I am not able to change the settings (for example etc. - the right of the screen of the BIOS boot order does no more).
  I access the bios with pressing ESC on the boot process, then F1 when prompted "" check system, then press [F1] key. Problem is that I don't ask the supervisor password.
  There should be a prompt for the supervisor password, but it's not. So I am not able to connect as a supervisor.
  I know I can manually change the boot sequence by pressing F12 during startup, but this strict solve my problem.

  THX in advance
  elitecamper

  Have you tried to update the BIOS? On the Toshiba site, I can find a newer version that you have right now. Check it!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before setting a supervisor password load default settings in the BIOS and then you can set the password and try again. Maybe it works.

• where is the gateway desktop remotely

  where can I find the ts gateway to start Remote Connection

  Hello

  You can check the link provided to configure settings for the TS Gateway Remote Desktop connection
  http://TechNet.Microsoft.com/en-us/library/cc770601 (WS.10) .aspx

  If you are still having no problem with the TS Gateway then I suggest you post in Windows 7 IT Pro TechNet Forum. Validation of the query in the link mentioned below:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• Can Ping but not connect via Remote Desktop - how to change the settings of the outside LAN adapter

  I have a Windows Server 2012 machine connected to a Windows 7 Pro machine via a switch.

  Internet is shared on the Windows Server and the port sharing network has a static ip address. Similarly, the port connected to the Windows 7 Pro has a static ip address. I was able to desktop Windows 7 remotely from the server without any problem until very recently.

  Recently, I had to change some properties of the LAN on the machines and I was changing the gateway by default for the Windows 7 Pro, when I was hunting from my remote desktop session and I was not able to reconnect since. I don't know if I accidentally blew the subnet or the default gateway, but I know for sure that I do not touch the part of the parameters ip address.

  In addition, I can't ping the server computer but I am not able to connect via RDP. Please suggest any possible causes and solutions for this case. Both computers are remote and I can connect via the internet to the server computer.

  As my title suggests, I'm trying to find out if there is a way to reset the settings of the adapter LAN from Windows 7 to my server and proceed from that.

  Please let me know if you need more information.

  Thank you.

  RAM.

  Hi Ram,

  Please contact Microsoft Community.

  Problems with Windows Server 2012 are supported in the TechNet Forums. I suggest you send the request in Windows Server 2012 general Forums TechNet.
  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserver8gen

  Hope this information helps.

• Change the settings of the user

  Hey,.

  I would like to ask whether it is possible to change the settings of the technology for the network user. I went through the documentation and unfortunately I have not found something to do, other than reading enabled technologies. Basically, I would like to make an app without head that allows to control the technologies of active network based on the use of the network. For example:

  1. active use: 4 G

  2 moderate usage: 3 G

  3. no use: 2 G (to receive emails, messages, etc.)

  Kind regards

  Daniel

  Edit: IMHO, if there is no such api to control user settings, it could be a really nice addition to the next OS update. Of course, for security reasons an application must ask permission to the user on a per parameter basis.

  There are very few API to make adjustments now.

  I suugest go you to SAID.

• How to use the gateway carrier on BlackBerry J2ME WAP?

  How to use the gateway carrier on BlackBerry J2ME WAP? Because the default gateway on BlackBerry is "blackberry.net". How to hard code in the application to force the application to use the WAP gateway? An example of code? Thank you!

  You can specify the specific settings of the WAP gateway within the Connector.open () method. There is a knowledge base of any developer this article here:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is_-_Different_ways_to_make_an_HTTP_or_socket_connection.html?nodeID=826935&vernum=0

• Cannot change the settings on the computer. No access to the administrator account

  Original title: I can't access permissions to change settings or programs.

  I can not access permissions to change any settings or programs and do not have access to an administrator account, I tried what allows one but you must have admin permission to do so. Please point me in the right direction, it seems that Ive tried everything. ID realyy don't want to spend money on software

  Hi Christophe,

  -With which user account you have connected? It is a standard user account?

  -What happens when you try to change the settings? You receive an error? In the affirmative, please let us know the exact error message.

  Since you are not able to create an administrator account, I suggest you to enable the built-in Administrator account.

  1. you must start the computer by using the Windows 7 installation media.

  Follow the steps in http://windows.microsoft.com/en-us/windows/what-are-system-recovery-options#what-are-system-recovery-options=windows-7 to enter the recovery options in Windows 7.

  Note: See the manual of the computer to change the Boot order in the BIOS and set the CD/DVD as first boot device.

  2. Once you start the computer by using the Windows 7 installation disc, follow the instructions on the screen then go food Advanced Options and select command prompt.

  In the command prompt, type net user administrator / Active: Yes

  After the command finishes, restart the computer and then log on to the administrator account by default, change the account type of the old user account and make as administrator and check if you are able to change the settings.

  Follow the steps in the http://windows.microsoft.com/en-in/windows7/change-a-users-account-type to change the account type of the user account.

  Once you have set the administrator type account with your user account, disable the default user account by following these steps.

  1. login to your user account.

  2. open the command prompt, type cmd. exe in the run search and right click on cmd.exe and select Run as Administrator.

  3. type net user administrator / active: No.

  This will disable the built-in Administrator account.

  Hope this information is useful.

• How to change the IP address of the gateway from the printer

  Try to set up the connection on my Officejet 6500 wireless wireless

  When you work through the configuration, the utility says:

  The gateway 0.0.0.0 the printer IP address does not match your router.  Reconfigure the setting on your printer to function.

  How to do that.  I can't find any mechanism.

  I don't have Norton firewall and race some of the utilities [HP printer] (when I try to troubleshoot) complains, but I've now disabled with no luck re-configuring/installing the connection Wireless to the printer.

  Wireless PC (VistA) 10.0.1.4 address

  printer 10.0.1.198

  default gateway must be 10.0.1.1

  Primary DNS is 10.0.1.1

  network is built onb Airport Extreme, to the cable modem.

  Thank you

  It seems that your printer is connected wireless to your router (the IP address of 10.0.1.198 seems valid).

  Your best bet is to set a static IP address for the printer and the gateway at the same time.  Here's how:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address.  Enter the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the gateway and DNS white.  This should take care of the error you get.

  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• How to change the settings of the edge GW firewall created by vRA

  Hi, NSX and expert vRA

  What I want to know is how to change the settings of the edge GW firewall created by vRA.

  I've created a plan including the network of transit as follows:

  

  According to this plan, edge gateway is put into service, but the firewall is also created as below:

  

  Because of this firewall configuration, the VM 'User' cannot access the VM 'WebSV '. How can I use vRA to make the link between 'User' and 'WebSV '?

  Yes, you need a 1:1 profile, otherwise what you try does not work.

  Grant

• C4580 change settings (from the open to WPA) wireless

  Hi all

  I have a C4580 and he was initially installed with wireless open (for various reasons at the same time). Now, I changed to use WPA and a password. Before the change, it is a very happy camper and worked very well. Now, he said only: "disconnected" and I can't print. Can I change any laptop here in seconds to use the new settings, but I can't find anywhere that I can change the settings. I got two calls for support for about 4 hours of total and they executed me all over the place. I can't believe there is no setting I can change to activate the new settings of the router into the printer. Other than to do an uninstall and reinstall, is there a shorter method to activate the new configuration of the router? As I mentioned, it was quite nice before changing the security setting. It is really becoming a car accident. Can anyone offer a solution more simple as the relocation (or supported by calling again? Please no.... not yet)?  Thanks for any help!

  Kurt

  Sure!

  • First, remove the password of your network (temporarily) so that your printer can be back on the network.
  • Then, print a the front of the printer Network Setup Page.  Get the IP address of the printer.
  • Now type this IP address in a browser.  You will see the printer's built-in Web server.
  • Go to the tab network, 802.11 (left), Advanced tab.
  • Enter your new password information, etc.  But first... before you leave...
  • Go to the tab Configuration IPv4 and set a manual IP address of the printer (the one used above), subnet 255.255.255.0, gateway, and DNS are the IP address of your router (probably your IP printer with a '1' after the last point instead of what the printer has).
  • Click 'apply '.  The printer works now with your new password, but not before you go back to your router to apply it again!

  Reset the printer and the router and good luck!

• Settings of the user interface in the preferences grayed out

  I'm a Super Administrator and administrator of the workspace and still I can not for queues or UI settings in the preferences. I need to change the startup location to "Start the process" of "To Do".

  Set preferences for the user interface in the preferences > settings of the user interface tab. The following preferences are available.

  • Start location: Specifies the page that displays when you access the workspace HTML. The four options available are the processes to start, track, and Favorites.

  The settings of the user interface tab is grayed out why and how I get it back?

  Thanks to our QA group, we found a way to access the settings of the user interface. The single tab activated when opening preferences is out of the office. By selecting the button "+" in the tabs on the desktop calendar, queues, and the user interface settings are allowed.

• Windows Server configured as the gateway crashes with referee interface

  I'm running the Active Directory to Windows 2008 R2 servers multiple infrastructure test lab. One of the functions as a gateway server, configured with routing and remote access. Each time, after a few hours, the network to public internet traffic stops. One way to solve is, is to restart the gateway server. When network stops, same gateway itself cannot connect to the public network, the DNS servers of the ISP ping with the IP addresses is answer. Ipconfig/release and / renew buy do a thing and disabling WAN network interface freezes. After that, try to stop and restart the server will be fallow with blue screen and cold reboot.

  WAN interface uses the pilot VMNET3 and Intel LAN interface 1000 (something like that). VMtools has been installed from the console of the last version of ESXi.

  Familiar with this problem to anyone?

  Try to change the external NETWORK adapter to E1000.

  ---

  MCITP: SA, MCTS Hyper-V, VMware vExpert, VCP 3/4

  http://blog.vadmin.ru

• Unable to access role to change the settings for the virtual Center

  Hi all

  I recently created two new roles to restrict the Active Directory in Virtual Center security group and the Resource Pool. I cloned VM Administrator role and tweaked so that this group can view full data center while being only able to create/delete the virtual machines in the resource pool. However, I can't work on what permission setting would completely restrict the role of access and changes to the "vCenter Server Settings" on the home page.

  Can someone please help?

  Virtual Center: 4.0.0 (Build: 208111)

  Thank you

  Fadi

  That sounds right.  roles and rights spread from host/cluster view for the sake of server configurations.

  If you set the role to the next level in vCenter 4 (which is the name/IP of your vCenter), they will have access to it.

  You can define a low level (data center), then define non-role or nothing at the top level.  you will need to place this permission/role on each object in the data center, you have for each of these connections.

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• DB Link using the gateway to Oracle to SQL server 2005

  Hi all
  
  I am facing problems to configure the gateway for Oracle database to connect to SQL server, given below are details:
  
  Machine has
  ----------------
  OS = Windows server 2008 R2 64 bit
  DB = Oracle 10.2.0.5 64-bit
  
  content of C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\*tnsnames.ora*
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = WIN-G9TJ5GM2SAO)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )
  
  dg4msql =
  (DESCRIPTION =
  (ADDRESS =
  (PROTOCOL = TCP)
  (HOST = 10.1.87.119)
  (PORT = 1521)
  )
  (CONNECT_DATA =
  (SID = dg4msql))
  (HS=OK))
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  Machine B
  ----------------
  OS = Windows Server 2003 32-bit
  DB = SQL Server 2005 32-bit
  Gateway = Gateway Oracle 11 g 32 bit
  
  Content of C:\product\11.2.0\tg_1\dg4msql\admin*\initdg4msql.ora*
  
  HS_FDS_CONNECT_INFO = localhost:1433 / / SDÉS
  HS_FDS_TRACE_LEVEL = OFF
  HS_FDS_RECOVERY_ACCOUNT = RECOVERY
  HS_FDS_RECOVERY_PWD = RECOVERY
  
  Content of C:\product\11.2.0\tg_1\NETWORK\ADMIN\*listener.ora*
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = eZeePay-DB)(PORT = 1521))
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  )
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = dg4msql)
  (ORACLE_HOME = C:\product\11.2.0\tg_1)
  (PROGRAM = dg4msql)
  )
  )
  
  ADR_BASE_LISTENER = C:\product\11.2.0\tg_1
  
  On computer A, if I use TNSPING it gives below error
  
  C:\users\administrator > tnsping dg4msql
  
  AMT Ping Utility for 64-bit Windows: Version 10.2.0.5.0 - Production on 12-MAR-2
  012 11:44:12
  
  Copyright (c) 1997, 2010, Oracle. All rights reserved.
  
  Use settings files:
  C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
  
  AMT-03505: failed to resolve the name
  
  
  Please please help what's not in configurations!
  
  Best regards!
  
  Irfan
  
  Published by: irf_mas on March 12, 2012 12:47 AM

  Hello Irfan,
  As far as I can see the correct air configuration files, but you can check a few things-

  1. they may have been lost when posting in the forum, but can do you that there is a space at the beginning of each line in the tnsnames.ora and listener.ora except for the first line of each section-

  ORCL =

  dg4msql =

  EXTPROC_CONNECTION_DATA =

  LISTENER =

  SID_LIST_LISTENER =

  2. What is in the file sqlnet.ota on the computer has?

  3. host 10.1.87.119 is the machine eZeePay-DB?

  4 is the gateway listener began the eZeePay DB?

  Kind regards
  Mike