ad_bugs does not display 3036401.But patch that his replacement is indicated in ad_bugs.

Similar Questions

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• Sony VGN-AW41ZF "devices and printers" does not display anything, but they work

  devices and printers doesn't ' display anything, although all devices work.

  The reinstallation of the computer (sony VGN-AW41ZF) and add the devices, they have been posted.

  Later, we don't know why, "devices and printers" display nothing.

  Just added a scanner, no problem, but once again not displayed.

  Now add bluetooth devices does not work. My sony bluetooth mouse, I installed before the problem and it still works

  http://eSupport.Sony.com/

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  And make sure that Windows is up-to-date with the latest Service Pack.

  See you soon.

  Mick Murphy - Microsoft partner

• HDMI does not display windows, but the BIOS displays

  Hello world

  so I have a little funny problem.  We have a LAN party at my place where I created my office with the TV as a second monitor.  Graphics card is an AMD Radeon HD series 8600.  My main monitor is a Dell ST2420L monitor connected via HDMI.  Cable tv was a standard vga.  Setup worked very well until I took apart.  For some reason any Windows do not forget the television once I unplugged it so I fiddled with the settings... bad idea.

  So now, Windows will happily connect to TV with VGA and HDMI and run very well (it also automatically changes whether the primary monitor for a reason if the two are connected), but my normal monitor will show all things BIOS until windows starts with HDMI and works very well with a VGA.  I know I could just switch to vga, but I really like my HDMI and I really want to know exactly how I messed up it if someone has an idea.

  Thanks for the help.

  The resolution is probably set up as something that that does not support the monitor (if I had to guess, is that the resolution of the TV was great, but it could be anyway).  Connect it to your TV so you can see the screen, click the wallpaper and choose the resolution of the screen and turn the slider all the way down and apply it.  Then reconnect your monitor.

• Why Siri does not display captions, but no audio?

  I had my Apple TV hooked up for about a day now (4th gen), but may not know what's going on w/Siri.

  He (she?) hear my questions and requests, but does react with legends titled on-screen. When she responds, there is no real her coming out of the TV.

  I scrolled through, this which I think is, all the audio options and can't seem to find a way to make audible sound.  All other navigation sounds and the sounds of the program seem to work very well.

  Thanks for any help.

  Siri on ATV4 has only a return to the screen. Personally, I am grateful.  I can want a sport/weather update but does not interrupt the movie watching...

• Firefox does not display videos, but will be Chrome/IE.

  It's all in the title really. FF does not appear videos. In Youtube, the screen is black, apart from the red button 'play' in the middle. When I click on play it says "an error has occurred." In all the other video sites, video section is empty, white. I have uninstalled/reinstalled Firefox and Adobe Flash Player. Firefox is also fully updated.

  Hey mick3690, this is probably due to the recent update of the plugin to version 11.3 adobe flash. It has caused similar problems for many other users (chrome & IE get provided with a different version of the plugin by adobe).

  You can try to remove flash 11.3 of the section of the configuration/program windows downgrade to an earlier version & Control Panel, until adobe fixes these problems.

• Firefox 4 beta does not display pages, but seems to load.

  I installed the version beta of Firefox 4, but whenever it opens, I can't see any content. Tabs and toolbars are on top, but the rest of the screen looks like glass and shows just the stuff behind firefox.

  Also, what seems to be a status bar, (with noscript controls icon and sync) appears at the top left just below the toolbar.

  I can navigate to pages, go back and forth and see all load in tabs at the top, but I don't see anything below.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: a new profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins»

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Since the last update of Windows 10 build 10041 does not display the hidden taskbar that Firefox is well on the screen.

  Hello
  As I already said. Firefox is the only program that prevents the taskbar hidden to come if the mouse falls down. It wasn't before and I use 10 Technical preview Windows as it is available. I always minimize Firefox if I need the taskbar.
  Thank you
  Rudolf Aigner

  Hi sprit.
  The default value is 32-bit version of Firefox, and I doubt that the 64-bit version is installed because of the confusion.

  More information about the 64-bit version:

  • https://hacks.Mozilla.org/2015/03/Firefox-Developer-Edition-38-64-bits...
  • https://wiki.Mozilla.org/Firefox/Win64

  I really don't know much about whether they are testing on Windows 8.

• New tab does not display some sites, but nothing.

  When I open a new tab, it does not display the usual sites, but it shows just a white screen. Only the search bars and icons are displayed. It is not also a gear in the top right.

  Hi, try this: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.newtab.url and make sure that 'Value' is defined Subject: newtab (click right to change, if necessary, by taking care of not to change what anyone else).

  If this is not successful or if it changes, to try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Firefox does not display jpg files from a web page so that other browsers

  I created a page and downloaded www.nutechequipments.com/equipment.html page does not display jpg files in firefox only everywhere, including in Dubai. But all other browsers display images jpg uploaded in a perfect way. In Firefox that the table is loaded with spaces reserved. It is not a problem with my computer. It is the problem all over the world.

  the html code example is given below:

  <td><img src="equip\equip.jpg" size width="110" height="90"></td><td><img src="equip\equip1.jpg" size width="110" height="90"></td><td><img src="equip\equip (2).jpg" size width="110" height="90"></td><td><img src="equip\equip (3).jpg" size width="110" height="90"></td>

  You have the backslashes (------: fumble that 5% C, as seen in tools > Page Info > media) in the scr attribute of images and which does not work in Firefox.
  You must change the backslashes into slashes in order to

  equip%5Cequip.jpg
  equip%5Cequip1.jpg
  equip%5Cequip%20(2).jpg
  equip%5Cequip%20(3).jpg
  equip%5Cequip%20(4).jpg
  equip%5Cequip%20(5).jpg
  equip%5Cequip%20(6).jpg
  equip%5Cequip%20(7).jpg
  equip%5Cequip%20(8).jpg
  equip%5Cequip%20(9).jpg
  equip%5Cequip%20(10).jpg
  equip%5Cequip%20(11).jpg
  equip%5Cequip%20(12).jpg
  equip%5Cequip%20(13).jpg
  equip%5Cequip%20(14).jpg
  equip%5Cequip%20(15).jpg
  equip%5Cequip%20(16).jpg
  equip%5Cequip%20(17).jpg
  equip%5Cequip%20(18).jpg
  equip%5Cequip%20(19).jpg
  equip%5Cequip%20(20).jpg
  equip%5Cequip%20(21).jpg
  equip%5Cequip%20(22).jpg
  equip%5Cequip%20(23).jpg
  equip%5Cequip%20(24).jpg
  equip%5Cequip%20(25).jpg
  equip%5Cequip%20(26).jpg
  equip%5Cequip%20(27).jpg
  equip%5Cequip%20(28).jpg
  equip%5Cequip%20(29).jpg
  equip%5Cequip%20(30).jpg
  equip%5Cequip%20(31).jpg

• Problems connecting to a projector. Laptop recognizes the new monitor but projector does not display anything.

  I have a Macbook Pro (non-retina display) mid-2012. I have a mini VGA screen that worked throughout the year and all of a sudden, it doesn't seem to work. My computer recognizes the new monitor (screen flickers and flies all content secondary screen) but the projector does not display anything. I tried to reconnect the cable, the cable VGA switch to turn on the projector and turn off, restart my computer and clouds of dust on the connections. Sometimes if I move the connection just that will work, but if I so much as breathe on it or watch funny it stops and I can't get it back.

  Jiggle the cable or adapter is something different, you have a physical adapter or cable problem. Any bit-reversal can help that.

• Windows Media Center does not display my photos. I tried to re-setup my album and it shows my files but no pictures in them. I can see my photos in all viewers

  all my photos are in JPEG format, I download my photos on several websites and on my Windows live.com page, I also see with Windows Live Photo Gallery, I use Adobe Photoshop 7 to edit and save my pictures in .jpeg format, I can visualize in Picasa, PhotoStudio, ZoomBrowers EX etc.. I can spend my photos to one of my other computers and my pictures by e-mail, and they can be consulted. I open one of my photos in Photoshop and saved in a folder on my desktop in .jpeg and .bmp and it does not display. I sort my folder in date and make sure that hidden files is checked. I know I'm missing something, but still nothing.

  Hello
   
  Welcome to the Microsoft Answers site!
   
  How long have you had this problem?

  All files compatible photo in your library in Windows will appear in Media Center, including whatever it is stored in the folder my pictures or public photo. If you store images somewhere else, like an external hard drive, you can add them to the Media Center as well. To learn how, see Add files to media in Windows Media Center.

  The following is a list of reasons why an image will not display in Media Center, as well as suggestions for correcting the problem.

  • The picture file type is not supported in Media Center. For example, some digital camera photos are saved in the RAW file format, which is not supported in Media Center. If you have a photo editing software, try to open the picture in that program, and then resaving in a file type that is supported (for example, JPEG). To see what types of files are supported in Media Center, see file types supported by Windows Media Center.

  • The file is corrupted. If this is the case, try to open the image in another photo editing program, and then save it back into a different file type. For more information on the damaged files, see the files corrupted: frequently asked questions.

  • The file is hidden. You can view a hidden file by changing its properties in Windows. For more information, see Show hidden files.

  Please see the article for more details below:

  http://Windows.Microsoft.com/en-us/Windows7/working-with-pictures-in-Windows-Media-Center-frequently-asked-questions

  Back to us for assistance.
   
  Kind regards
  Savan - Microsoft technical support.

• Created using Microsoft keyboard layout creator of keyboard, but after installation does not display the name of my keyboard on language bar on the taskbar

  I created my keyboard with "Microsoft keyboard layout creator v.14" and I create the package. It works fine but does not display the name of my keyboard on the language bar on the taskbar

  Hello

  Follow these steps and check if that helps.

  (a) click Start and type area and the language in the search bar and press to enter.

  (b) go to keyboards and languages tab.

  (c) click on change keyboards.

  (d) now, click Add.

  (e) now under any input language, you have chosen who find and choose keyboard.

  (f) ensure that all options are listed.

  (g) if there is a check mark in the United States remove it and place a check next to the language and click Ok.

  (h) now you can check cross if the preview shows you the correct layout.

• My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, that I tried to close all pages open and it started making a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, I tried closing all open pages, and he started to make a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hello

  Looks like a hardware failure.

  Try to reinstall the operating system:

  It comes to the use of the Asus restore procedure.

  http://www.ASUS.com/support/FAQ/1006133/

  See you soon.

• I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I had the same problem - my solution:

  1. If you create a connection to Adobe, make sure that you click the verification link in the email sent to you to verify your account.

  2. I leave the download Assistant, then began the process to download the original page download Assistant - he asked if I wanted to run the already downloaded version, which I chose.

  3. once the download wizard opens again, I logged in using my newly created connection and then, he showed the free trial in the product list (it has not been listed as free, but it was).

  My download is happening now - about 1 hour to go.