Satellite advertising L870 3 recovery discs - do not have

Similar Questions

• Recovery disc is not compatible with my system

  I just bought a set of recovery disks for my HP Pavilion TouchSmart 23 - f412ea running Windows 8.1, at HP when I install the first disc, I was informed that the recovery discs are not for my system, is it possible that I was sent the wrong discs or is there another problem, the disks I have HP 749301 - DW1 , Build ID: 14ME 1RRA601

  Hello

  The version number of HP recovery kit does not build number of your PC.

  HP has sent to all of recovery hard disks.

  I just your question for further consideration.

  Jaco

• Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not work properly

  Hello

  I am trying to create a recovery for my Toshiba Satellite L500D PSLK0A-00U009 disc.
  When I run the Recovery Disc Creator he starts to open then it comes up with a box with an exclamation point, he says: 'cannot open target partition. Then the recovery disc creator will open. It seems normal, then when I insert a CD for the process seems to work then it says error and stop and ejects the CD, the error is that the code is: 0E01B5-26-510444 D 9

  I already uninstalled and then program then reinstalled with the help of a download from the Web MyToshiba site and this has not fixed the problem.

  Any suggestions?

  Hello

  Have you tried different discs from different manufacturers?
  How about you, USB flash memory usage? AFAIK, you can create a bootable Recovery USB flash stick too.

• Satellite A505-S6005: creating recovery discs power calibration error

  Hello

  just bought a satellite A505-S6005 and try to create recovery discs.
  I am using Dynex DVD - R.

  He created the 1st disk after the slightest mistake 2 times and when I started the 2nd drive continued to get again the message that is OE01BS-26 error Code - 2 said A 037303 power calibration area error occurred, check the disk for dirt or scratches.

  The disks are not scratched, and after going through 5-6 discs wonder if something is wrong with the optical drive & not the disks.

  Any help appreciated.
  Thank you.

  Hello

  I think it's a problem with your DVD media
  You are using incompatible disks!

  Try different DVD from different manufacturers.
  I m using the Verbatim or TDK DVD-R and my CD/DVD drive handles these discs without problem.

  Check it! I'm sure this will help you!

• Satellite C670D - 11K - Toshiba recovery disks does not work

  I tried to recover the Satellite C670D - 11K using new factory system recovery disks provided by Toshiba. Both drives do their thing until the end when I get these messages:

  Files\mcafee\virusscan/dat\000.0\avvscan.dot c/program Error (error = 1117)
  Error restoring image
  request could not be performed due to the i/o device error
  Error image x could not apply for win 7 V:\\HDDRecovery\SWIMG\15434XSP. Water rain Index 2 in c HARD drive management

  Only option after this point is to press a button any and I get the white screen Toshiba

  When I turn on the laptop I get message "boot mgr is missing." I tried the disc of recovery a couple of times since and things don't get any better. In fact I just get a black screen with cursor after

  Suggestions this is appreciated please? I was thinking of buying the recovery disks would be a solution simple but should I give in and go to a professional now?

  Thanks, Paul

  I assume you are using recovery discs that you created using Toshiba recovery disc creator tool, right?
  It seems silly now, but something went wrong and I m afraid recovery disks are now useless. It turns out that you can't change anything or force the cell to the recovery image installs successfully.

  The only thing you can try is - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm
  I don't think this will help, but you can test it in any case.

  Now, you have two options:
  -for the restore disc original order from Toshiba
  -install the clean version of the OS by using the Microsoft installation disc

• Satellite L350-17Z: Question recovery disc creation - problem with calibration

  I'm eager to get win xp instead of vista current on Satellite L350-17Z because some soft is not stable and vulnerabilities, while under xp on the desktop computer, I had no problem. XP compatibility mode is not solve this problem.

  So I decided to do it in a cruel manner as a laptop is new and almost empty, not to mention the habit of hard drive xp. Still I tried to make a recovery, using TOSHIBA Recovery Disc Creator.

  Buta * during DVD burning there is a fault and message about some problems with the calibration. I tried a few discs - same result.

  Hi Snen,

  It would be interesting to know what CD/DVD drive you have. Maybe you should try to update the firmware of the drive. For some readers of Toshiba and Pioneer, the site shows an update of the firmware. It s worth a try!
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  And what kind of DVD that you use to create a recovery disk? I have good experience with the types of DVD - R and I use Verbatim.

• Satellite L500-12 q Recovery Disc Creator Error

  Hello

  I have a laptop Satellite L500-12 q. I used the Recovery Disc Creator to make recovery disks. It needs 4 discs. The 1st was writtenk ok, but on the second, towards the end of the current status, it stopped advancing. It's almost an hour, and it is still not finished. I'm on the second try. The disc is spinning and the drive makes noise as if it was written, but it does not advance at all.

  Please, could you help me?

  Thank you
  Claudiu

  Claudiu Hey,.

  What kind of DVD that you use to create the Toshiba recovery disks? I got also some problems to create a recovery disc but I changed DVD + R, DVD-r media and everything was ok! I used Verbatim discs to create because I have really good experience with this kind of discs. In addition, it seems that TDK discs also work quite well. Check this box!

  If it doesn't work check the Toshiba page for an update of the firmware of your WEIRD!

• Satellite P300 - 13 M - recovery disk do not work

  Hello

  I have a Satellite P300 - 13M. I want to reinstall my Vista, but the recovery of the program disk do not work.
  I do not have to uninstall the program, it is also on my list of software. I can see the program in C:\Program Toshiba Toshiba Recovery Disc Creator, but when I click on ToRDC.exe it does not start.

  These are all the files in the map:

  13/08 / 2008 17:30 < DIR >. +
  13/08 / 2008 17:30 < DIR >... +.
  28/02 / 2008 20:49 < DIR > Img +.
  19/03 / 2003 13:14 msvcp71.dll + 499.712
  21/02 / 2003 21:42 msvcr71.dll + 348.160
  30/10 / 2006 08:27 tdcmdpst.cat + 7.958
  27/10 / 2006 23:36 tdcmdpst.inf + 4.093
  18/10 / 2006 11:50 tdcmdpst.sys + 16.128
  11/03 / 2006 03:30 122.880 TDComSet.exe +.
  21/11 / 2007 17:09 TDMSTING.dll + 262,144
  21/11 / 2007 17:23 TODDSrv.exe + 129.632
  12/06 / 2007 13:59 1.212.416 ToRDC.exe +.
  + 14/02 / 2006 16:23 TosChk.dll + 57.344
  24/06 / 2007 19:39 TrdcHelp.html + 9.657
  25/10 / 2005 08:53 VXBLOCK.dll + 28.672
  + bestand (en) 2.698.796 12 bytes +.

  I also have the map on E:\HDDRecovery with all the files in it (4.12 GB).

  Is there a way that the program works or can I make HDDRecovery map an ISO image and burn it to a cd?

  Hello

  > I do not have to uninstall the program, it is also on my list of software. I can see the program in C:\Program Toshiba Toshiba Recovery Disc Creator, but when I click on ToRDC.exe it does not start.
  Sorry for my question but what you want to do exactly?
  You want to retrieve the laptop using the recovery disk or you want to create a recovery disk?

  The Toshiba Recovery Disc Creator creates the recovery disk using files in HARD disk recovery file that is placed on the second partition.

  If you want to recover the laptop, then you simply boot from the recovery disc.

• Re: Satellite A300 - error creating recovery disc

  I'm not really providing any solution, but is facing a similar problem with my laptop Satellite A300-1EI, bought in Dubai, UNITED Arab Emirates. I tried to make records of recovery through Toshiba Recovery Disc Creator. However, each time, I got an error message. I tried with Verbatim, Philips DVD-R and lost several DVDs. Meanwhile on the net surfing, I discovered that the engraver of DVD from Toshiba is a little sensitive and try to use Verbatim DVD - R brand. I tried with Verbatim 2 days and at the last moment when I was about to dance with joy that the first DVD is created, received an error like below

  * "The following issue occurred during the recording of the data of the disc.*
  Current process will be stopped.*

  * A power calibration area error occurred.*
  * Please check if the disc is scratched or dirty.*
  * If Yes, please try again with a new disc.*

  "* (Error code: 0E01B5-26-00037304)."

  I don't really understand the message. Can advise you on how to create the recovery disks.

  Kind regards
  Vijay

  Hello

  To me, it seems that the used DVD discs are not completely supported by ODD.
  It seems to be a compatibility issue.

  I had this problem in the past, but I could resolve it using another DVD from another manufacturer.
  I had a good experience with TDK DVD-R.
  Using the R disk I was able to burn the disc, but using the + R I received an error message.

  See you soon

• Satellite L10 - 205 - product recovery CD does not work

  I buy a Toshiba Satellite L10 - 205 laptop from Dubai and since it was working fine.
  But now it became slow and I thought that to format using the original product recovery CD.

  When I format, it gives an error about 25% of the formatting.
  I tried to do it again and again, but the same problem persists.

  Which, in my opinion, I had the wrong product recover CD when it starts formatting he says loading Windows 98, but I have windows xp on my computer.

  Could you please give me the soultion or is it possible to get the right porduct recovery CD

  > Which, according to me, I had the wrong product recover CD when it starts formatting he says loading Windows 98, but I have windows xp on my computer.
  This is not a defect, Toshiba image that sits on the recovery disc for an old series laptop is based on Win 98 again Win XP is on the disc! So don t worry it s Win XP!

  I m not very well why you can not recover the laptop, but there are two options; HARD drive failure is so the laptop has been slower or the recovery disk is faulty (maybe a few scratches, etc.)

  In case you, it would be desirable to test the laptop with other bootable disks (MS Win XP or Linux) to check if the HARD drive is ok

• Satellite L500 - cannot create recovery discs - 0D00F6-49-00000001 error

  Hello

  My pc start up after that I did a system restore. For example, I can't use the function fn key.

  Last week I tried to format my pc. But when I opened the TOSHIBA Recovery Disc Creator got an untimely error 00000001-49-0D00F6.

  I've managed to create 2 4 DVDs. IM using Dvd - r from memorex.
  If anyone can help.

  Thanks in advance for your help.

  This is the first time that you try to create recovery discs?

  How you created 2 discs if the Toshiba recovery disc creator starts by mistake?

  Anyway, in this forum you will find similar topics. No doubt some recovery file is damaged, and the drive could not be created.
  I put t think that there is something that you can about it. Either it works or not. Maybe you should contact the nearest Toshiba service and explain the situation. I hope they can help you with this and disc Toshiba DVD original to order for you.

• Satellite P10-304: 2nd recovery disk does not work

  I'm selling my laptop.

  Went to use recovery of original product CD provided along with the PC.

  1 disc worked OK - unfortunately 2nd disc (undamaged) stops at about 60 percent and gives the following message;

  error number 437
  Can not read the file
  version: 7,00 (Apr 2001 19, build 254).
  License: XQ199905
  command line arguments: - clone, mode is pload, srx = x: \01367000.GHO:1, dst = 1:1 - batch

  PROG mode: prog_local
  Name of the path:
  dump file: x:\01367001.GHS
  dumpPos: 0
  flagexplode: 10

  State of IRQ of mouse: no IRQ (0)

  Help, please!?!

  I have a buyer waiting and everything seems to be Dutch!

  Hello

  It's not easy to say what's wrong with the 2nd recovery disk.
  I would recommend formatting the HARD drive completely and try again to recover the operating system. If it doesn't work, well try to contact Toshiba. Here, you can order the recovery CD. Maybe the problem of recovery will be solved as a gesture of goodwill.
  Nevertheless, the recovery cd is not expensive.

• Satellite P200: Creator of recovery disc - error code: 0E01B5-26-2A030C00

  Hello

  I am trying to create the recovery disc for my new Sat P200 and it gets 1/3 of the way (1/2 way through the first disc) and displays an error message:

  "The question has occurred during the recording of the data on the disk. The current process will be stopped.

  An error occurred during the registration phase. Please check if the disc is scratched or dirty. If so, please try again with a new disc.

  (Error code: 0E01B5-26-2A030C00) »

  I tried twice on nine discs Verbatim DVD + R.

  Any suggestions as to what causes this problem?

  See you soon
  sophiajs

  I recommend you test different DVD media.
  Try DVD-R and from different manufacturers.

  From my own experience, not all CD and DVD is cared for and compatible.

  Greetings

• Satellite A300 - displays error recovery disc creator

  Hello

  I have a Toshiba Satellite A300 (PSAGCE) and I created the recovery by using the "TOSHIBA Recovery Disc Creator' disc but I did this a few months ago, but now the disc is scratched, and when I am formatting my computer it gives me an error when loading files. So I decided to create another disc, using the "TOSHIBA Recovery Disc Creator', but she also give me an error with one of the files during the creation of the disc. What should I do now?

  I have a friend who has a Satellite A200, can I use the disk? I did a printscrean showing the error. Sorry the bad English, I'm Portuguese...
  [http://img199.imageshack.us/img199/4030/semttulovj.jpg |]

  Hello

  It is good that you posted a screenshot of the error, but perhaps you can translate it into English, it would be more useful.

  In any case, the disks that you use to create the recovery disk? I m using Verbatim DVD-R media. It worked perfectly for me and I can recommend this path.

  In addition, you can see the Toshiba page for an update of the firmware of your CD/DVD drive.

  Finally and above all, I doubt that for Satellite A200 recovery disk will work for you also. The models are different

• Satellite L650-1 - second recovery disk can not be read correctly

  Help!

  I tried to get out of box state my Toshiba Satellite L650-1. The 1st recovery disk works but when I put my 2nd recovery disc my drive won t read the.
  I tried to insert my 2nd recovery disk into another laptop and it reads it.

  All the solutions for this?

  > I tried to insert my 2nd recovery disk into another laptop and it reads.
  How to understand this? If you put in another computer and check the contents in Windows Explorer, maybe it's readable, but this disc is for use of facilities.

  You created those discs?
  Do you use them for the first time?

  Normally, when you start installation of recovery first disc is copied and when the copy is complete, you will see message to the second recovery disk in the optical disc drive. Put the second and confirm by clicking OK.

  What happens when you do this?