Why Siri does not display captions, but no audio?

Similar Questions

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• ad_bugs does not display 3036401.But patch that his replacement is indicated in ad_bugs.

  Hello
  
  Our env is 11.5.10 and I applied CU2, then ATG RUP6.
  
  I apply the fixes required as documented problems in + known on top of 11i. ATG_PF. H. delta.6 (RUP6) - 5903765 [ID 459353.1] +.
  
  One of the patches is Patch 6496781 and for this patch, the patch pre-required is 3036401. The patches that are known to include or replace patch 3036401 are 11.5.10 and 11.5.10.2. But ad_bugs does not show this patch (3036401). But his original replacement patch 3151672 is shown in ad_bugs. Is that mean that 3036401 is applied? No idea why 3036401 does not appear in the ad_bugs?
  
  Rgds,
  Thiru

  Since we 11i. HZ. M, I have the Patch 3036401 included.

  Fix.

  Thank you
  Hussein

• Sony VGN-AW41ZF "devices and printers" does not display anything, but they work

  devices and printers doesn't ' display anything, although all devices work.

  The reinstallation of the computer (sony VGN-AW41ZF) and add the devices, they have been posted.

  Later, we don't know why, "devices and printers" display nothing.

  Just added a scanner, no problem, but once again not displayed.

  Now add bluetooth devices does not work. My sony bluetooth mouse, I installed before the problem and it still works

  http://eSupport.Sony.com/

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  And make sure that Windows is up-to-date with the latest Service Pack.

  See you soon.

  Mick Murphy - Microsoft partner

• Why XP does not display Japanese characters after you add the language pack?

  I installed XP on a new drive after a virus killed the other installation of it.  I noticed that XP did not display the titles to my Japanese music.  I tried to install the language pack, but he's really changed anything.  They were clearly visible on my old version before it crashed. Any suggestions?

  Imran M.

  Thanks for your reply!

  I need Japanese for display on all browsers (IE 8.0) and Opera, and I need it to appear inside Windows Media Player. (version 11).

  I do not download language files.  I only installed the language pack from my drive XP (service pack 2).

  Today, however, I started my computer and some "automatic updates" waiting to be installed.  I went ahead and install.  Afterwards, I checked WMP and all my Japanese music correctly displayed in Japanese.  (I don't know why).  Then, I went to IE and jumped a couple of Japanese pages and found that they were showing the language correctly.

  Then... I don't know how to solve the problem itself, but things seem to work the way I need them for.  It is a little frustrating not knowing how the problem has been fixed, in which case it should never show himself again, but no real sense to worry about this.

  Thanks for your help!

• Why RoboHelp does not display the contents of the data required of <>.chm when combined as aid in my application?

  Beautiful Hello all,
  Met someone said below show-stopper. Another GREAT MOMENT help required, will help me in a big way.
  Using Adobe RoboHelp, Version 10 and IE version 10.
  I n my local machine:
  1.) I finished my Design editor courtesy of technical writing
  2) generating chm file: display -> pods -> Single Source Layouts -> right click on Microsoft HTML Help -> Tagged defined as primary layout
  3) primary production layout: file -> create -> layout main page (Microsoft HTML Help)...
  4) look at a main Layout: file -> display -> main layout
  Everything works ODDLY far with the desired output (like Hide, back, refresh, home, Print, Options, content, Index, search, glossary and data content)

  Show stop, in my application server:

  5.), I copy the robohelp project any folder my local machine to my path of the application server

  6 .) My Application was developed in ASP .NET, Version 4.0.

  Linkhelp 7) has been created in this application in which here <>.chm file name has been linked in the code to read of the project RoboHelp Server folder------! SSL! ------ Microsoft_HTML_Help\

  8.), I connect to my application says-> click on the help page--> displays the required structure / keys as hide, back, refresh, home, Print, Options, content, Index, search, glossary

  (a.) by clicking on on the books or the topics listed under Cmaterial : you are prompted to with error message warning called " Navigation to the webpage was canceled. "What you can try: Retype the address "

  * This is a huge SHOW-STOPPER. I spent many hours on this subject, but unable to deciper with a solution at all) *

  (Note: am able to open and read the contents of the data required by clicking on the books or the topics listed under Cmaterials project RoboHelp Server folder------!) SSL! (- Microsoft_HTML_Help\ <>.chm)

  Why is the required data from the <>.chm content not displayed RoboHelp when combined as a help in my application?

  Cheese - Vipin ndoye

  If you looked at the error message and searched the forum, you will find the answer, since it is a problem that began in 2005. You must run no CHM files from a server and can not without editing the registry of users. See the next page.

  http://www.Grainge.org/pages/authoring/chm_mspatch/896358.htm

  Throughout your questions were based on webhelp, why all of a sudden we're going CHMS.

  See previews on my site for the correct form of aid to be used in different scenarios.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Why BridgeCS6 does not display the contents of some folders?

  I will look for something in Bridge CS6, through my different folders and all sudden bridge will not display the content of a certain (or even folders) without apparent reason.

  It doesn't seem to be any pattern to it and occurs randomly.

  
  Everyone knows about this problem?

  
  

  Bridge will not display any of the items in a certain folder/volume/drive.

  Here is a screenshot of what happens

  

  It happened on the day I installed CS6 a month ago and I've applied all updates that have been released.

  I'm on OS x 10.6.8.

  
  

  Any info would be much appreciated.

  Thank you.
  

  All this would have something to do with an error message that I've been doing from day one, whenever I start bridge.

  CS6 is come with (again) with a different format of the cache and you need for the discount cache files and folders to a new cache file. If you do not use more of CS5 (and with CS6 on your system, there is no need more), I would say to manually delete the cache for both files and start again.

  This is the route that I've used several times to get a fresh start when the bridge had serious problems. (read first and then try)

  Exit the bridge and got to your user library (the library in your user account, not the library level system root). Here is the path to follow:

  User (your name) / library / caches / Adobe / Bridge CS6. Inherent are two files (Cache plugin Adobe Bridge and a folder called cache). Drag the two files outside the library (preferable to the trash but it is you). The two files them refresh chokes with files new, fresh and empty once you have restarted the bridge.

  If there is still a case for Bridge CS5 in this place I would also delete these contents here. Cache files can reach massive proportions, and you can have only one version of bridge active at the same time.

  Then, in the same library as above (user (your name) / library /) go into the Preferences folder and inherent to find and remove the plist for bridge (com.adobe.bridge5.plist) by dragging it in the trash.

  Now restart Bridge with pressing the option key and choose Reset preferences.

  This gives you a new and cool bridge as in out of the box. You need to reset your preferences for your custom wishes but if you saved the custom workspaces, they all should be there and you can restore it with the option under the triangle of the workspaces in the bar of the high bridge, the colors of the user interface must be set to zero if you have customized before).

  But it must also be cached files again for thumbs, previews and ACR settings. Depending on the size and the quantity of files you have this will take some time. I used to select the main folder where are my subfolders with photos is placed in and on the view menu, select the option to show items from subfolders. Then I let it run all night (have a lot of large files on my system). After that, all my files are put in cache and ready to use.

  You should be aware that the bridge can be very processor demanding when caching and have enough free space on your disk, but especially to the left enough RAM installed, this shouldn't be a big problem. While the minimum requirements show something like 1 or 2 GB of RAM, more RAM is recommended. RAM is cheap these days and if you can you should max your system with as much as possible. All applications will provide this improvement

• HDMI does not display windows, but the BIOS displays

  Hello world

  so I have a little funny problem.  We have a LAN party at my place where I created my office with the TV as a second monitor.  Graphics card is an AMD Radeon HD series 8600.  My main monitor is a Dell ST2420L monitor connected via HDMI.  Cable tv was a standard vga.  Setup worked very well until I took apart.  For some reason any Windows do not forget the television once I unplugged it so I fiddled with the settings... bad idea.

  So now, Windows will happily connect to TV with VGA and HDMI and run very well (it also automatically changes whether the primary monitor for a reason if the two are connected), but my normal monitor will show all things BIOS until windows starts with HDMI and works very well with a VGA.  I know I could just switch to vga, but I really like my HDMI and I really want to know exactly how I messed up it if someone has an idea.

  Thanks for the help.

  The resolution is probably set up as something that that does not support the monitor (if I had to guess, is that the resolution of the TV was great, but it could be anyway).  Connect it to your TV so you can see the screen, click the wallpaper and choose the resolution of the screen and turn the slider all the way down and apply it.  Then reconnect your monitor.

• Firefox does not display videos, but will be Chrome/IE.

  It's all in the title really. FF does not appear videos. In Youtube, the screen is black, apart from the red button 'play' in the middle. When I click on play it says "an error has occurred." In all the other video sites, video section is empty, white. I have uninstalled/reinstalled Firefox and Adobe Flash Player. Firefox is also fully updated.

  Hey mick3690, this is probably due to the recent update of the plugin to version 11.3 adobe flash. It has caused similar problems for many other users (chrome & IE get provided with a different version of the plugin by adobe).

  You can try to remove flash 11.3 of the section of the configuration/program windows downgrade to an earlier version & Control Panel, until adobe fixes these problems.

• Why Youtube does not display text in Chinese?

  YouTube pages read in Firefox (36.0.1) on my Mini Mac running OSX 10.9.5 show some, but not all, of the text in Chinese. Pages display correctly in Safari and Chrome. I reinstalled and refreshed Firefox with no change.

  Change view/encoding Western modifies the display of characters in English, but the words are gibberish.

  See the attached screenshots.

  It's the second screenshot that shows the incorrect coding.
  I missed that this screenshot was when you pass to the West, so that is to be expected.

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

• Firefox 4 beta does not display pages, but seems to load.

  I installed the version beta of Firefox 4, but whenever it opens, I can't see any content. Tabs and toolbars are on top, but the rest of the screen looks like glass and shows just the stuff behind firefox.

  Also, what seems to be a status bar, (with noscript controls icon and sync) appears at the top left just below the toolbar.

  I can navigate to pages, go back and forth and see all load in tabs at the top, but I don't see anything below.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: a new profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins»

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Why firefox does not display my bearings

  Hello

  I have a Web site: http://www.hopeproject.co.za . Take a look on the bearings and the portfolio thumbnails in Safari and Firefox.

  I designed for that when you rollover the links that they change to light blue and I have an effect on the thumbnails in the portfolio section so that when you mouse over or click it fades in and out.

  PROBLEM

  In Safari, it works perfectly.

  In Firefox, it only works when you click on can the bearings on the document and then won't work and miniature. Why is this? How do I get these two effects / settings work in both browsers... is where I need to add coding? I don't know a lot of code, so if someone could breakdown the steps in a few simple steps I would really appreciate it!

  Wes

  Hello

  Heureka, there we go! It looks that I / we could help you with our recommendations.

  But you are always looking for a simpler solution? If you have two options: look at point 10 and 12 of http://forums.adobe.com/message/2771915.

  You may also register a complaint for the movers and shakers of the FF, with an entry here:

  

  so that they participate in our problems (I agree!).

  Hans G.

• Why Firefox does not display my home page as a list, rather than with the normal graphics?

  This problem also occurs when I open a new tab and enter my homepage (www.rr.com) web address

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Why HBox does not display the value of the label?

  I try to display the value of language in HBox (red cloth).

  < mx:HBox label = "Tax Code" width = "100 percent" height = "100%" >

  < mx:VBox autoLayout = "true" >

  < mx:HBox label = "tax detailsborderStyle""" = "solid" borderColor = "#000000" ToolTip = "Tax Details" textAlign = "center" > "

  < mx:Form width = "100%" height = "90%" >

  < mx:FormItem label = tax "Registered(Y/N)" direction = "horizontal" >

  < mx:RadioButtonGroup id = "rbgCreditTaxDetails" / >

  < mx:RadioButton label = "Yes" groupName = "rbgCreditTaxDetails" / >

  < mx:RadioButton label = "" groupName = "rbgCreditTaxDetails" / >

  < / mx:FormItem >

  < mx:DataGrid dataProvider = "{status}" >

  < mx:columns >

  < mx:DataGridColumn headerText = "TaxCode" dataField = "status" / >

  < mx:DataGridColumn headerText = "tax registration No." dataField = "description" / >

  < / mx:columns >

  < / mx:DataGrid >

  < / mx:Form >

  < / mx:HBox >

  < / mx:VBox >

  < / mx:HBox >

  Hello

  This tag will be useful when you add your HBox in a TabNavigator. In tabs label will indicate.

  Hope this helps

  Rush me

• my pc does not display the sound icon and I have no sound of my speakesrs are pluged

  sound works when last used. PC does not display the icon of audio and have no sound

  Hello jeffreysarver,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, it seems that you are having problems with the sound. As I understand well you can't listen to audio.

  I need to ask you some questions to help you better.

  1. were there any changes (hardware or software) to the computer before the show?

  2. the problem when you play system sounds?

  Perform the steps suggested by Sebastian M from the link below and check.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-pictures/no-sound-in-my-Windows-XP-computer/b2ad45d8-3242-4837-A728-b233ffd3f73c

  Answer to us if you are having problems with the sound or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.