Ad rotator Edition gives the error code 0

Similar Questions

• Vista - Windows Update fails and defender gives the error code: 0 x 80080005

  Well, I downloaded Veoh Web Player and DivX player (with a driver package) almost the exact same time, so I don't know who caused the problem. (Guessing Veoh done.) I restored system which usually solves it for me and then uninstalled both programs and even if my computer is not nearly as slow as it was when they were both installed, it's always problems. Windows open frequently stops responding. As I said, the system restore only makes it better for a short time while longer I go without eating, the freezier my computer becomes. I also noticed that for about 2-3 days (after which my computer almost completely freezes and I have to startup repair) most minor cosmetic changes.

  I use Firefox, so the first change I noticed was that left side of the address bar in a small half circle in a regular square. Tiny. Then the scroll bars on all the programs I've used lost their Aero look and returned to normal, old style Windows. Eventually good menus click lose their new look, then all the start menu, and finally Windows Explorer stops working and all the windows, when not in use, become small tabs at the bottom of the screen. After that the computer hangs almost entirely.

  Each time I restart or system restore the first thing I see is a little box that says that a Windows host process has stopped working. Windows Update continually fails and Windows Defender gives the error code 0 x 80080005. What can I do? I looked for answers before coming here to help and what I read it looks like a downloaded driver can interfere with the host process, even if I uninstalled it (supposedly) all. Thank you.

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now to reset Windows Update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code of reading on windows xp home edition. The error code is fffffc02. Someone knows how to fix this?

  I am trying to reinstall windows xp home edition on my laptop after I dumped everything and I get an error that says: "the signature for windows xp home edition Setup is invalid. The error code is fffffc02.  The system cannot find message for message number 0xfffffc02 text messages for syssetup.dll file. Anyone know how I can fix this or something?

  Hello 2009 poster... Welcome to 2011 and I'm sure by now that you have bought a new computer or obtained the answer elsewhere.

  This is in short, that I just got this error working on a disk recovery & Dell laptop.

  This is probably due to read/write to the CD/DVD drive.  It's very annoying and simply a file library, catalogue missed reading it will mess this!

  Error & you can get there... I get closer and closer each time.

  I think this guy CD-ROM drive is odd OR even better the quality of the recovery disc might be off too.

  Other errors are too 0xfffffc02 | fffffc02 - and read the newspapers it is always a mistake in the reading of a file.

  I just got this new while typing, but I was in there last time - 15 minutes so you can see the weird nature of it.

  Rob

• WindowsActivationTechnologies gives the error code 0 x 80070422. Nothing I've tried has helped him. (Windows7 Home Premium 64-bit)

  Here is what happened:
  I went on the notebook and there was a pop up saying that windows was not authentic. So I clicked on the link that he gave me and I downloaded WindowsActivationUpdate.exe and then it gave me the error code 0 x 80070422, I don't know what to do. I tried a few minor things with services, but that did not help. I tried to copy and paste;

  start wuauserv sc config = auto

  SC config bits start = auto

  SC config start = auto DcomLaunch

  net stop wuauserv

  net start wuauserv

  net stop bits

  net start bits

  net start DcomLaunch

  on the Notepad and save as Repair.dat and who did not, because I have 64 bit.

  Can someone please? The update for the WindowsActivationUpdate does not work. It gives me just the same error codes.

  You need much more than that - look here for advice on Windows Services...

  http://www.blackviper.com/service-configurations/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  I recommend to any what setting back by default first.

• File extraction gives the error code 0x80004005

  I received a file compressed by e-mail.  The sender has tested the file successfully.  When you try to extract the file I get 2 messages.  Firstly, Windows can not extract because the destination folder could not be found.  Second error message 0 x 80004995.  I tried to move the file to another folder, but it's the same thing.  How can I fix these problems?

  I don't know why you receive these error messages, and you can't find any information about the error code (be it in Bing, Google, or Microsoft Knowledge Base).

  Try to use another program to extract the file.  Try 7-zip (which is free) to: http://www.7-zip.org/.  Maybe the extraction will work if you are not using Vista extraction program.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• CS5 update continues to give the error Code: U43M1D207?

  I tried to update Photoshop CS5 on a number of occasions since the introduction of Lightroom 6 but I get the error Code: U43M1D207

  Help creating cloud / cloud creative applications download error

  http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html

• Adobe Application Manager Trying Update itself gives the error Code: U43M1D207

  I have CS5 running on Windows 7 with Adobe Application Manager and I have ben notified and installed the software updates very well for the last 18 months. But there are a few days the Adobe Application Manager informed me of an update and every time I have try and install the update it gives me the following error after downloading the patch 'a mistake to is updated. Quit and try again later. Error code: U43M1D207. »

  I tried several times the update even after restarting the system. It seems to me that it is an update for Adobe Application Manager itself.

  Any thoughts?

  If not I can remove this app, so I can get rid of the annoying icon on the bar telling me tasks, I have an update avialble who can't be implemented?

  Thanks for any help.

  I went into the preferences for the application manager and the saw was both CS5 and CS6 products listed and so I just disabled all CS6 products and he said no update available and the icon went away. I also see in the preferences, you have the option to disable the icon in the task bar if you don't want to tell their updates.

  Cliff

• Realtek card gives the error code 10 and does not work since the change of satellite

  How can I fix the realtek on my computer card. It was the dial upwards, after he took off and replace it with satellite my computer wouldn't access internet
   
  How can I fix the realtek on my computer card. He has been on dial-up, after taking if off dial-up and replaceing with satellite my computer wouldn't access internet. Noted code 10 and realtek does not work. So a please help fix me my computer.

  Hello

  What operating system is installed on the computer?

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  See the following article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• Installation of Canon PIXMA MG5200 Wireless Printer gives the error code 0 x 00000643 on Windows Vista

  Original title: Wireless Printer put in place

  Trying to install the scanner software etc. on my new printer canon PIXMA MG5200, already implemented successfully using WPS, while it was printing ok, error code 0200 0000 documents came along with a "a newer version of MP readers is installed for cancelled installation. Uninstalling now left me unable to reinstall the printer link with my laptop with the advent of error code 0 x 00000643 up - help what I did?  Vista Home is my OS. Our other laptop which runs on Windows 7 is still printing ok but also not load the software. Canon told me to ask you to clean the registry? ! If this is what is needed, how can I do this, and surely the problem repeats whenever I try to install again. I tried the system restore before I loaded the software and no change.

  Hi AlisonHamilton,

  It is sufficient to indicate the complete error message you receive.

  Method 1: You can see the steps outlined in the article below, which deals with a similar question

  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).

  http://support.Microsoft.com/kb/944960

  Method 2:  You can run the fixit available in the link below

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************

• KB2838727 and KB2845533 gives the error code: 80073712

  Original title;

  Two day errors followed inviting this update 06/12/13

  Need help!

  A mistake has maintained what prompts when I tried two updates:

  (1) cumulative Security Update for Internet Explorer 10 for Windows 8 (KB2838727) &
  (2) update for Windows 8 (KB2845533)

  The code of error's 80073712,

  Then, I tried several times the resolution of the problems, the problem Windows Update always there. I couldn't do an update for that matters.

  Hi Gary,.

  If you receive Windows Update error 80073712 0 x or 80073712, it means that a file needed by Windows Update is corrupted or missing.

  1. The issue is limited to the updates that are mentioned in the post?
  2. Have you tried to download updates manually Update for Windows 8 (KB2845533)

  and Update Cumulative for Internet Explorer 10 in Windows 8 (KB2838727) security?

  Windows has tools that can help you solve this problem of troubleshooting. Follow the instructions in the link below and check.

  Windows Update, error 0 x 80073712

  Note:

  The applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  All of your personal files will be deleted and your settings will be reset. All the apps that the is come with your PC will be reinstalled, but all other applications will be deleted.

  Please post back with the State of the question.

• I can't install the creative cloud adobe, it gives the error code: 43

  I don't know why this is happening

  Hello

  Please check the thread get the 43 error when you try to update creative cloud.

  Or you can also follow https://helpx.adobe.com/creative-cloud/kb/error-43-installing-creative-cloud.html

  Let us know if this helps!

• How I open windows defender manually when it gives the error code 643?

  At the start, it says Defender is turned off. Unable to activate manually. What could be wrong?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  ___________________________________________________________________

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

  ___________________________________________________________________

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Need help with the error code 80070424

  I'm not able to update my windows vista. It gives the error code 80070424 and says 'windows can not find updates of nw'. I am not able to change all settings also unsuccessfully. Help, please.

  Hello

  Please, try the following:

  Click Start > run >
  Type the command of follow-up in the Open box.
  "net.exe stop wuauserv" (without quotes)
  Press Ok

  Repeat the same for the following commands:

  Regsvr32.exe c:\windows\system32\wuapi.dll
  Regsvr32.exe c:\windows\system32\wups.dll
  Regsvr32.exe c:\windows\system32\wuaueng.dll
  Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
  Regsvr32.exe MSXML3.dll
  Regsvr32.exe qmgr.dll
  Regsvr32.exe qmgrprxy.dll
  NET.exe start wuauserv

  Restart the computer and try again.

• Cannot download updates, get the error code 80004002

  Windows Update gives the error Code 80004002 Windows Update has encountered an unknown error.  I've been told reregister the UpdateDLL Windows and given the orders but three orders gave Error Messages.  No there is no way to uninstall it and reinstall this program?

  Most of my files are on an external hard drive so I reinstalled Vista Dell drive yesterday morning.  I gave up trying to solve the update.  In any case, thank you for your time.

• Trying to install: WindowsXPMediaCenter2005-KB900325-usa__but I discovered that I also need this, but it gives me the error code 1706: KB867460 - NDP1.1sp1 - X 86

  Hello, I have Windows Media Center, and I tie to get the 2 Roll-up so I can connect my computer to my xbox, but I need to do this: WindowsXPMediaCenter2005 KB900325-United States, but it will not install. I think the problem is that I do not have this: NDP1.1sp1 - KB867460 - X 86

  But when I try to install that, I get the error code 1706

  And Yes, I checked the solution to this on the support Web site, and it says to install the Net 1.1 sp1 which as I have said, does not install

  I have checked the updates in my Add & Remove Programs, and I have no patch 1.1 (but take note I have two 1.0 patches) which is something that my computer can not have on it in order to install Net 1.1 sp1

  So yes, I tried to call microsoft for some time, but can not get a person, and the machine cannot help. I also tried the Fix - it program. So yes, I could really use some help, I tried to understand this for quite awhile.

  Thank you.

  P.S. Don't copy and paste this, that of what I tried to do http://support.microsoft.com/kb/900325...

  Edit: I did a search in all files and folders, and my computer found no netfx.msi (I also tried to run) which is the place where I think that my computer wanted Net 1.1 sp1 must be installed...

  Hello
   
   
  a. create a folder named 'Framework' at the root of the C: drive.
  i. open workstation.
  II. right-click on "Local disk, C:" and select 'open '.
  III. on top of windows, select 'File' and then 'new' then 'folder '.
  IV. This will create a new folder and leave the cursor in the box .and files name 'framework '.
  b. download the Microsoft .net Framework v1.1-
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3
   
  and save it in the C:\Framework folder
   
  c. download the Microsoft .net Framework v1.1.4322 Service Pack 1.
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A8F5654F-088E-40b2-bbdb-A83353618B38 & displaylang = in
   
  and save it in the C:\Framework folder
  (d) extract the required files by running the following commands from the
  Start-Run dialog box:
  C:\Framework\dotnetfx.exe t:c:\framework\extracted\ / c
  e. clear the Temp folder:
  i. Select 'Start' and then 'run '.
  II. Type "%temp%" without the quotes, and then select OK.
  III. delete all the files found and if they won't erase continue to another.
  f. install .NET Framework 1.1 SP1 of
  c:\framework\NDP1.1sp1-KB867460-x86.exe, if this attempt fails for some reason any
  Please, do the following and send me the c:\sp1.log that results.
  g. remove the SP in the root of C by using the following command from the
  Start, and then run the dialogue:
  C:\Framework\NDP1.1sp1-KB867460-x86.exe /xp:c:
  h. do the following to install the connection using the following command
  from the start-> Run dialog box:
  msiexec /p c:\S867460.msp/l * v c:\sp1.log REINSTALL = ALL
  * If the file is not found, please do the following as we saw some
  systems to extract the file in the local folder instead.
  msiexec /p c:\framework\S867460.msp/l * v c:\sp1.log REINSTALL = ALL
  I. Si you are prompted for the 'netfx.msi' navigate to the location
  c:\framework\extractedetfx.msi, Installation should continue without
  error.
  
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.