Adapter for EMC SRDF

Similar Questions

• Adding EMC SRDF adapter for VMware SRM fails

  Hello community,

  
  

  We have DMX storage in the protected site and recovery site. We are trying to install the array manager for MRS.

  
  

  Adding matrix Manager fails with the error below; hoping someone has fixed this and can offer some guideance.  Thank you!

  
  

  Add Array Manager

  
  

  Cannot add the table view manager.

  
  

  SRA command 'discoverArrays' failed. Unable to connect to the management table host.
  Check the logs of EmcSrdfSra for more information about the error.

  We have just added a new article in the knowledge base: addition of EMC SRDF adapter fails when you try to add the Array Manager (2041557)

  I hope this captures all relevant to this issue.

• SRM 5.5 with EMC SRDF. Full recovery but reprotect fails

  Hi all

  I am fairly new to SRM, but have been plugging away in establishing a new environment that uses:

  vCenter 5.5 u1 (two Sites)

  Solutions Enabler 8.0.1.0 - 1953

  EMC SRDF Adapater (SRA) = 5.6.0 VMAX 20 k

  EMC SRDF utilities SRA (and community VSI) = 5.7.0.2

  RS = 5.5.1.8569

  I followed documentation provided by Cody Hosterman ~which is great and got me almost to the end.  I was able to successfully switch (recovery), a virtual machine using a test Stimulus Plan from Site A to Site B. It was working fine.

  We don't use TimeFinder (unauthorized) and so when we realize the expected behavior once happened that the SRDF link has been broken. The State of the R1 to Site A device has become write disabled. The device of R2 in Site B became read/write and the State of the device group is "Fail Over". It is in SRDF asynchronous mode.

  
  

  To try to 'Restore' the group, I see errors relating to the configuration of the storage to reverse direction.

  http://i.imgur.com/zWiGtT5.PNG

  I checked the log EmcSrdfSra as suggested on the site now main SRM server and it seems that there is a mistake shortly after you have created a new consistency group.

  http://i.imgur.com/5hZT8HQ.PNG

  I raised a support call with EMC with it directly as a first port of call, but it is in its infancy so I thought I would ask if anyone has any idea what could go wrong here. I have exhausted my googleFU skills and I'm at the stage of trying to get some eyes on the issue. I am happy to provide more information if necessary or to answer your questions - what someone might have.

  
  Really hope someone can help!

  Thank you!

  Ryan

  Hello

  I got some progress with this so I thought back and share what he needed to solve this problem.

  Essentially, in our environment, we have a VMAX in each site. We have now two servers Manager array with Solutions Enabler (on a Unisphere web) installed. The reason is that we have a VCE Vblock and VCE provided a nursery table server. In addition, we have built our own for the purposes of the SRM and other similar things.

  In essence, we do not configured new servers of facilitators of Solutions fully and missing GNS on them. We have also put in SRDF pairs and above all: GROUPS of DEVICES on the old managers table manually. These groups of devices répliquiez not to the new servers, but the other config (Volumes, etc.) have been! So SRM was trying to talk to our new boxes and only really get half the information on volumes and above all the volume groups.

  Once we have properly configured device groups on each site for the Volumes that were used for SRDF replication, everything started working. Since then, we have been in and double-checked the configuration manager servers on new table and all is good. This solved the problems that I posted above.

  I hope this helps someone in the future!

  Ryan

• Check Point virtual network adapter for SSL Network Extender

  I just downloaded an update recommended for Windows 10. After updating downlaoded, whenever I start my computer it say compatibility assistant this app is not working properly try to reinstall Check Point virtual network adapter for SSL Network Extender. Why do I get this notice? I have no problem getting on the internet. I have a modem and a router that work well with all my devices. I use an ethernet cable, nothing has changed in addition to the recommended update.

  I thought I would try devices and adapters Manager double click Network and looked for updates. Updated and now I don't get notification any longer.

• If I unplug the power adapter for my MacBook for 5 minutes during the migration assistant will continue the migration or the battery has been disabled in utility mode?

  I used the migration assistant to transfer my documents and applications of a backup time machine to my MacBook. I know that I need my wired adapter so that the whole process to complete due to the time it takes for the migration. If I unplug my adapter for 5 minutes the macbook will lose power because of the battery off in utility mode or power will be uninterrupted?

  Im not sure he could stop it, but to be sure I would just leave it alone, because if it is interrupted it could damage the macbook and time machine backup

  better safe than sorry

• Model wireless adapter for HP Pavilion 15

  Hello

  I need to buy a wireless adapter for my HP Pavilion Notebook of 15 and I would like to know the company, the model and configuration of the same.

  HP has an online store in the United Kingdom where I can purchase this item?

  Details of the laptop:

  Model: HP Pavilion 15

  Processor: AMD 5750 APU A10

  RAM: 8 GB

  Graphics card: AMD Radeon HD 8650 + 8600 M

  HARD DRIVE: 1 TB

  Motherboard: 1983 01.15

  System BIOS: F.33

  OS: Windows 8.1

  Thank you

  Hi @Metal_Head,.

  Shows that you are connected to a network that is not identified with limited capabilities.

  To troubleshoot the wireless, you will need to remove the Ethernet cable.

  If you right click on the Network Center and sharing, disconnect the connection you and connect to your router.

  Thank you.

• Wanted: Adapter for Satellite A20-S103

  I'm desperately looking for an AC adapter for a laptop SA20-S103! Help!

  Hi Frank,.

  I think that's the one you need: -.

  BA http://www.mdsbattery.co.uk/Shop/productprofile.asp?ProductGroupID=1600&Brand=Toshi & DepartmentName = % 20Mains % % 20adapters 20AC Laptop & D epartmentID = 112

• WiFi adapter for hp compaq 15 computer pc laptop 15-s006tu - windows 7 (32 bit)

  WiFi adapter for hp compaq 15 computer pc laptop 15-s006tu - windows 7 (32 bit)

  Hello:

  I see that something is wrong here.

  This link works...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.tpst=swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_131223_1 & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• Universal adapter for laptop

  Dear members,
  Today, I bought a universal adapter for my toshiba tecra a4. But I saw the car gives 19 volts adapter and I have my computer laptop needs 15 or 16 volts. Can I use the adapter or is there a possibility that I destroy my laptop?

  I hope you can give me an answer to my problem.
  Thank you!

  Hello

  Unfortunately I didn't find out who is compatible with your device, but there are two universal adapters (15 to 19 volts). In my opinion, you must use this with 15 volts.

  I have many times connected different adapters on my Tecra and nothing was damaged, but in my opinion, you should be careful about this. If there is any attempt of the possibility of exchanging it with 15 volt one. On this path, that you'll be sure that nothing goes wrong.

  I really put t know how sensitive electronic power supply power is.

• Power adapter for laptop is spoiled

  An adapter for my laptop (satellite P25) became out of use (contact seemed to be lost in the junction of wire connected with the laptop which is accompanied by quiet beeps of the adapter). I am currently out and service centers are not accessible. Are there simple ways in this case?

  Hello

  It would be very interesting to know the name of this device.
  However, I found the site with parts supported.
  Please visit this link:
  http://www.sparepartswarehouse.com/Toshiba, Laptop, Parts.aspx

  Good bye

• I'm looking for adapter for Satellite A110

  I would like to purchess an adapter for my laptop (Satellite A110-178). Where can I find it?

  And? Have you found?
  Isn't it?

  Satellite A110-178 uses PA3467E-1AC3 19V 65W adapter 3. 42A
  If you want you can visit the Toshiba site Options & accessories and you will find the same adapter.

  Try to search for this part number and I m sure that you find several offers and online stores that provide this part.

• Car necessary adapter for Qosmio G20-110 part number

  Hello

  I need a car adapter for my g-20-110, but cannot find any info anywhere on the Toshiba web site.

  Food running a 4-pin, so one of the jobs at low prices from Maplins does not.

  Any ideas?

  Thank you very much

  Richard

  Hello

  I guess you don t know the site Toshiba Options and accessories.

  Toshiba Europe site, you'll find this page in the products:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/home.do?service=EU&from=http%3A//www.Toshiba-Europe.com/

  In the page Options from Toshiba and accessories, you will find taken additional devices supported and compatible for each Toshiba laptop.
  You should also know that Toshiba authorized partner in your country also sells compatible parts.

• Need adapter for my Equium L10

  Hello

  I was wondering is anyone know where I can buy an adapter of the. I have looked everywhere and cannot find a so if you could I'd be very grateful cheers

  MORE GREEN

  Hello

  Usually, you will be able to buy all the compatible parts of Toshiba service partner in your country.
  You can also try bye the part form local retailer if you know the part number.
  The other possibility is to google for some online stores.

  I visit the Toshiba options and accessories of the site and find the power adapter for Equium L10-206.
  It s AC adapter 60W, 15V DC, 4A, 60W, 3-pin PA3282E-1AC3

• Replacement AC adapter for M300?

  Hi-

  I have a M300 and I want an extra adapter for it to not have to carry it with the laptop.

  What is the model number for the adapter AC which are compatible with this laptop?

  P.S the compatibility against each adapter info is pretty useless.

  --
  Chris

  Hello

  This adapter must be compatible with your device.
  PA3282U-1AC3 15V 4A 60W

  Good bye

• Need adapter for Satellite C855-1TG

  Part of the plug of the power adapter on my laptop C855-1TG broke, making it impossible to charge the laptop battery to me. I found it impossible to get a real replacement Toshiba from a trusted supplier to the United Kingdom. Can anyone recommend a company I could buy a replacement from?

  The adapter model number is PA3917U-1ACA.

  I don't live in the United Kingdom and may not help you directly, but if you use Google search and AC part number I am pretty sure that you will be able to find an online store where you can order.

  At last but not least I want to mention that you can contact the nearest Toshiba service provider ANDS order original AC adapter for your model of laptop.