ScanJet g 3010: 10 windows compatibility

Similar Questions

• Dragon Naturally Speaking has stopped working, how to turn off Windows compatibility mode?

  How can I turn off Windows compatibility mode

  I use Dragon Naturally Speaking (DNS) and all of a sudden it will not open. The info, after trying MANY proposed options, says "turn off Windows compatibility mode.

  Hello

  1. don't you make changes before the show?

  Try the following steps to disable the compatibility mode.
  a. Locate the launch of Dragon NaturallySpeaking file, right-click on it and click Properties.
  b. click on the Compatibility tab.
  c. in compatibility mode, uncheck the box "run this program in compatibility mode for".
  d. click ok to apply the changes.
  e. check if the problem persists.

  If the problem persists, then contact the program vendor support team:see Dragon NaturallySpeaking support

• I need the drivers to scan for a HP Scanjet 2300c for a Windows 7 operating system.

  I need the drivers to scan for a HP Scanjet 2300c for a Windows 7 operating system or compatible driver.

  Hello.

  According to HP, they offer no drivers for Windows 7, but in many cases the driver for Vista works on Win 7, then you can try this. If you have 64-bit Windows 7, then download Vista(64-bit), if you have 32-bit Windows 7, download Vista.

  The drivers can be found here.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=no&cc=no&prodNameId=73502&TaskID=135&prodTypeId=15179&prodSeriesId=73500&lang=no&cc=no

• HP Scanjet 6300c driver para Windows 7

  Hello

  I change Windows XP to Windows 7 and my scanner HP Scanjet 6300c did not have a driver to install.

  I hope to have a solution. Thank you for your help.

  Hello

  Thanks for posting your question in the Microsoft Community Forums.

  From your post, it seems you want HP Scanjet 6300C drivers for Windows 7.

  If so, please refer to these links and check if this answer your question:

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&TaskID=135&prodSeriesId=25287&prodTypeId=15179

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=18414&locale=en_US&TaskID=135&prodSeriesId=25287&prodTypeId=15179

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=60104

  I hope that helps!

  If you need help on this problem or any question of Windows in the future let us know.

• Windows 8 Embedded Standard doesn't have a "Full Windows compatibility"?

  Hello

  I am trying to determine what version of Windows Embedded might be the right one for a particular product. The comparative table of features at https://www.microsoft.com/windowsembedded/en-us/windows-embedded-8.aspx indicates that the Standard edition version does not "Complete Windows compatibility". In the datasheet, I could, unfortunately, not to determine which features of Microsoft compatibility refers to. Does anyone know what restrictions apply?

  Thank you!

  Dominik

  Hello Dominik,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Thank you

• windows compatibility 8 hp scanjet 5500c?

  Hello

  I have a 6910p 32 bit hp laptop upated with windows 8 pro. I have a hp scanjet 5500c scanner. There is no update for windows 8 drivers on the hp Web site. All my other devices I've used XP work fine. I tried to load the software provided with the scanner in XP compatibility mode nothing works. Is it possible that I can get this scanner to work on this computer?

  Thank you

  Thinman

  Hello

  Based on the following, no work around so only one option: buy a new one or use it with other machines (not W8).

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=CS&CC=CZ&TaskID=130&prodSeriesId=77374&prodTypeId=15179&ObjectID=c03408379

  Kind regards.

• Need drivers for Scanner Photo HP Scanjet 4850 running in Windows 7

  Same problem as reported by others. HP Scanjet 4850 is NOT compatible. Request that one is not correct. Search for HP website for drivers is useless. I have an operating system of Windows 7 Home Premium edition 64-bit on a desktop computer.

  Hello

  I suggest you to download the latest driver on the site of manfacturer and install in Windows XP compatibility mode. To install a program in compatibility mode Windows XP please follow link below:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Also, I would like to inform you that the device manufacturer is responsible for providing the compatible driver and microsoft does not all drivers.

• ScanJet 4470c driver for windows 8

  I bought a HP Pavilion to replace an old PC that was running Windows XP.  This computer has Windows installed in the store 8.1 (or factory) and there is no driver for my scanner Scanjet 4470c I can find.  HP download attempts have been unsuccessful to date.  What is your solution?  It is interfacing with a HP scanner HP computer, and it should work perfectly, in my opinion.  Help please.

  JMG01, welcome to the forum.

  Your Scanjet is not compatible with Win 8/8.1.  Here is a guide that shows the Scanjets that are not compatible.  If a HP product is more than a year they provide no drivers for it.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Windows 95 to Windows 7. Windows compatibility works do not to install from dos/Windows 95 version of Master of Orion 2. Is there another way?

  Hello

  I have a dos/Windows 95 master of Orion 2 and really desperate male relative.  Is it possible to install this game on a Windows 7 system?   He repeats to me that there is a mismatch due to 64-bit system.  I used the program in the control panel for trying to install programs designed for earlier versions of windows, but the compatibility program was not able to help me.  I also tried the right click on the Setup icon, select properties and change the compatibility of the system, but also the resolution here, but alas no luck.  Thank you!

  Hello EBahama.

  If its a DOS game I would suggest using DOSBox.  It's a bit complicated so I won't have a full run down here.  But assuming that this male relative has used BACK before he shouldn't have any problems.

  If it is a real 16-bit Windows application.  Then you could use a Virtual Machine, assuming that your CPU supports the required technology (many do not) and installs an earlier version of Windows on them.  Unless you use the professional version of Windows 7.  Then you can download 'XP Mode' which is a virtual machine that comes with a copy of Windows XP.

  A failure there is a Master of Orion 3 released a few years ago, I'm not on top of my head, if its compatible with Windows 7 64 bit.  But there are also the Sins of a Solar Empire, which is compatible, is a little different, because his real time, but his little near the same concept. :-) Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Neverwinter Nights Diamond windows compatibility problems

  Origianal title: Neverwinter Nights Diamond works with Vista?  If yes how to operate?  It works with Windows 7?  If so, how? Thank you

  Finally after many years and several accidents have completed Baldurs Gate II and Throne of Bhaal.  Bought Neverwinter Nights Diamond pack 2 years and finally able to load - surprised a compatibility problem does not work.  Even my Baldurs Gate II and Throne of Bhaal worked.

  Hello

  Once I was able to downloadand patch and then run the compatibility problem solver in the programs control panel

  Make older programs in this version of Windows

  I was able to get the game running in Windows 7 and Vista.

  Vista I deleted the shortcut on the desktop, as I had it already installed before finding the compatibility issue.  When I installed Windows 7 I chose not to install the shortcut - according to a thread I had followed.

  The most difficult thing to solve the problem was to find the patch. I can not even find the page it is on, but when I typed

  Installation for Win7vista NWN1 includes links patch - the right page came

  I'll try and copy and paste the link into this but do not know if it will work.  This is the file you need with never Winter Nights Diamond toget it works.

  http://files.BioWare.com/neverwinternights/updates/Windows/English/NWNEnglish1.69HotUUpdate.exe

  The forum was http://social.bioware.com/forum/1/topic/187/index/3341490/1 , although I wasn't able to get the intothat by typing.

  The patch downloaded and installed very easily.

  After you have installed the patch, I ran the "make older programs run in this version of windows" - using XP service pack 2 (Vista) and either 2 or 3 in Windows 7.

  It's located under Control Panel - programs - but I think that the classic view.

  best regards to all the help on this forum

  Wendolyn

• How to connect scanjet 3400 HP for Windows Vista?

  There's try to connect the SCANJET 3400 HP program to windows vista.

  Hello

  I'm sorry but there is no Vista drivers for this model scanner

  HP wrote only the drivers for it up to and including XP

  read below information; Click on the menu of the operating system

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=61835&LC=en&cc=us&DLC=en&lang=en&cc=us

  time to upgrade your scanner, if XP drivers do not work

  :

• Scanner HP Scanjet 4200C: cannot upgrade Windows XP to Vista

  After the migration from Windows XP to Windows Vista I can no longer operate my scanner HP Scanjet 4200 C. I installed the original series of scanner HP 4200C software and plugged the scanner via the USB interface. The software starts up, but cannot find the scanner. After reviewing the HP web page I discovered that HP does not provide an upgrade to Vista; the last update they provide is for XP and not Vista-compatible. Everyone had the same problem and found a solution?

  HP has written drivers for their products, not Microsoft.

  If HP has said that there are no Vista drivers for your printer model, it has none.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=60118&LC=en&cc=us&DLC=en&submit.y=6&submit.x=9&lang=en&cc=us

  If it will not work with XP drivers on the link above:

  You will need to consider buying a Vista Compatible Scanner.

  See you soon.

  Mick Murphy - Microsoft partner

• Need to deliver a "Fix" for Windows Compatibility Manager product. (Check Solutions)

  Back there, I was warned by Microsoft of a program compatibility problem in a program of mine. I came up with a fix that allows the program to now running vista and need to post a fix for this.

  So that users 'get messages when a fix is available.

  How can I do this?

  Thank you very much.

  Hello ADevGuy,

  Thanks for posting on the Microsoft answers Forum.

  I believe that this is the site you need for help with your Windows Vista software.
  http://msdn.Microsoft.com/en-us/Windows/dd203105.aspx

  This is for the Windows Logo program. They should be better able to help you with your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• 5550c ScanJet doesn't scan Windows 7

  Hello...

  I have a scanjet 5550c I'm scanning for some time with Windows 7 32 bit and no problems at the time.

  Now, I can't scan, even with Adobe Acrobat 10 Pro, said: can not communicate with scaner, and I can't put it back to work as used for...

  So I try all the way, even here, I found different ways and none work...

  The last of them, I try is scanjet full software and driver for 5590 v14 and v 9, I had TWAIN does not work I try to uninstall and no success at all,

  Here's what I got:

  

  I got this when I try to install 5590.  Now at this moment I don't know how to put this scanner... I love this scanner and was working with Windows 7 32 bit... Now, why not?

  I need your help TEAM... Thanks in advance...

  AACM

  Hello aacm21

  The series of products Scanjet is commercial scanners and it is the HP consumer forum. As a result, are not too familiar with commercial products, and I suggest you post in the HP Business Support forum for a better chance to find a solution.

  You will find the Board Commercial Scanjet here.
  http://goo.GL/lHpYs

• Dell Photo All in One 964 - 10-64 bit Windows compatibility

  Hello

  I just bought a new Dell laptop and updated to Windows 10.
  Unfortunally, my OS is unable to recognize the driver for my old printer Dell Photo All in One 964.
  I have read all the post on compatible with this specific printer driver. I tested the procedure:

  -remove the printer

  -install the driver Windows Vista - 32 bit or 64 bit and put Vista SP2 compatibility mode (also compatibility mode with Windows 7 and windows 8)

  -Connect the usb printer. But only the Scan is installed successfully.

  any help will be really nice!

  Thank you very much

  / Reg

  I installed the driver R146813 and it worked very well, for scanning and printing.

  Sure to first temporarily disable your anti-virus firewall before running the Setup.exe that comes with this driver. Complete the configuration all the way, including the print test page. Turn the firewall again later.

  The R146813 driver can be downloaded from www.dell.com/.../DriversDetails