Adapter: Thunderbolt male cable with a female Firewire 400 port end end

I need an adapter with an end of the Thunderbolt male cable and a Firewire 400 port end female.   Someone does this adapter?

PROBLEM: My old 2008 24 "iMac has a Firewire 400 port and my 35mm Nikon LS4000 Scanner is equipped with a Firewire 400 Port to.  I have a FireWire Firewire 400 male ends that connected the scanner to the old iMac.  I have a new iMac 27 "2015 which lacks Firewire 400 Port.

Tags: Mac

Similar Questions

  • FireWire 400, FireWire 800 and Thunderbolt

    My digi 002 rack is an audio interface he has a female FireWire 400 (6-pin) connection on the back, the card I just bought is female (9pin) FireWire 800 to love at first sight. A cable FireWire which has 6-pin male to male 9 pin, will that link the two together?

    Yes.

    (139639)

  • best cable put in place for mac mini end of 2014 2.6 G 8ram graphics intel 1 to HD for dell p2725Q

    you want to plug end of 2014 2.6 mac mini 8ram for dell p2715Q which cable works best?

    A cable with a mini displayport on each end. The monitor has a mini displayport to entry and you plug the other end into one of the Mini Thunderbolt port.

    Note that your Mac will get 30 Hz to 4K

  • using male to 3 x female cable stereo Audio Splitter with audio output

    The HP Pavilion 22-h031ea all-in-one has an audio output on the back of the unit. Is this ok for this connect with a 6:1 with a male/3 female x audio cable with stereo Audio Splitter?

    Simmo56, welcome to the forum.

    I am not sure it will work.  However, it will not hurt anything to try it.  If this does not work, you will not be able to have 6.1 sound.

    Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Can I use several adapters to convert a Firewire 400 in Thunderbolt connection?

    I have a firewire 400 device I want to connect to a Thunderbolt connection.  Can I use several converters for first shot of firewire 400 and 800, and then use the Apple firewire 800 adapter Thunderbolt?  Otherwise, any other suggestions?

    Perhaps, but not all cards can work in tandem. But why waste time and money. A FW 400 device won't run any faster on Thunderbolt. Why do you need to do this, and do you have looked for a better solution?

  • HP Envy 13-d002ns notebook: internet connection with cable with a HP Envy laptop

    I need to connect to the Internet with an ethernet cable, but my laptop doesn't have the necessary connection. Is it possible to use an adapter to connect to the internet using a USB port?

    One of the adapters USB-to-Ethernet (RJ45) listed at Newegg - USB converters should do the trick.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Unable to connect an adapter of TWC DCI401TWC2 with Windows Media Center as there is no option for IR remote IR connection

    I'm trying to install a digital Time Warner Cable DCI401TWC2 adapter model to work with media center.

    I can get to the extent where Setup search an IR connection, but there is no IR function with the above model

    and I can't go any further.

    I can see the image on the screen before the IR login screen using channel 3.

    Is it possible that I can install the Media Center works with the adapter object without it

    I'm looking for an IR connection.

    I use Windows 7.

    I've lived other messages on this forum dealing with this same problem, including the fix "hava" (which is not

    seems that there are more) but nothing seemed that it would help.

    Thanks for any help you can provide.

    Robert

    (Moved to programs)

    I went on the 'greenbutton' forum as suggested and was able to watch TV on Media Center remote for Time Warner box.

    The volume, for some reason, is not very strong and I am unable to use the guide in Media Center.

    I had to go through the configuration of 'antenna' of MC to accomplish this and not "cable."

    Thanks for the help.

    Robert

  • How to use the adapter from the wall with my Mac Pro laptop?

    How to use the adapter from the wall with my Mac Pro laptop?

    The AC wall connector is not compatible with the outlet on the MBP?  As the MBP charger will work from 100v to 240v, a transformer is necessary.  You need a converter that connects to the power outlet home and is compatible with your MBP.  You can buy the Apple travel kit:

    http://www.Apple.com/shop/product/MD837AM/A/Apple-world-travel-adapter-Kit

    Or you can use a single specific converter for the geographical area:

    http://www.Amazon.com/orei-grounded-universal-adapter-Singapore/DP/B004SCSV2U/re f = sr_1_4? ie = UTF8 & qid = 1460735377 & sr = 8-4 & keywords = us + in + uk + power + adapter

    (it is a UK USA example)

    Or you can get the converter that adapts the charger directly:

    http://www.Amazon.com/HIOTECH%C2%AE-extension-charger-connecting-specification/d p/B00MA48JZW/ref = sr_1_3? ie = UTF8 & qid = 1460735486 & sr = 8-3 & keywords = us + in + uk + power + ad aptor + apple + charger + cord

    (again, this is for a UK plug.)

    Ciao.

  • I had one for my Ipod Touch dock adapter model MC540C/a and I wonder if I can get a bluetooth adapter that is compatible with my dock adapter?

    I had a dock adapter (photo attached) for my Ipod Touch model MC540C/A and I wonder if I can get a bluetooth adapter that is compatible with my dock adapter?  Thank you!  Luc Roy

    Just what do you mean?

    MC540C/a is a 4G iPod touch and it has Bluetooth construction

    iOS: supported Bluetooth - Apple Support profiles

  • For Portege 3490 AC adapter does not work with the Satellite A100-159

    I have a supply of 15V 120W car (or plane Kensington). It works very well with a Portege 3490CT. It doesn't do a thing with my Satellite A100-159 new. The power supply provides also 15 V 6 a. Can someone tell me why the Kensington work?

    Or does anyone have a diagram to a power supply adapted myself, preference of 11, 5-14, 12(4) and 24 VDC (23-28: 8)?

    Thanks in advance!

    Hello

    I can give t you an answer why it does not work but usually you need to use the adapter for vehicle recommended by Toshiba. Incorrect adapter may damage the laptop!
    I think that the card for Portege 3490 adapter is not compatible with Satellite A100

    That the two car/truck/Air 120W laptop charger must be compatible:
    PX1237E-1NPO
    PX1235E-1NPO

  • How to connect the video cable with Qosmio G50

    Hello

    I bought the Qosmio G50-11s and received a video cable with it. (Jack mini jack RCA Red/white/yellow) But I find no way to connect it to my laptop, not the manual or all online resources talks about it. The problem is that I need to capture video from my VCR to my laptop and normal TV antenna comes with a lot of noise, so I have to use video in the cable. Any ideas?

    Thank you
    M

    Hello

    In the past I made some experiences with it. I wanted to create DVD copy old VHS VCR equipment. Using the recorder even? I did this on Qosmio G30 but the principle is the same.

    The fact is that you need to send the signal to the laptop and to do this you must use the video port.
    I do not see that your Qosmio has several of them, so I think that the only way to send the signal to your laptop is to use the antenna port. What video output port you want to use on your recorder?

  • Upgrade to modem cable with router?

    I plan to upgrade my modem cable to take advantage of the increased speed that Comcast now offers in our region. I think my Airport Extreme of 2007 could be a brake on the increase in the speed of a new modem. I would like to know if it is better to buy a new modem cable with built-in wifi router.

    My current Airport Extreme supports two iMacs (24 "in 2007 and a 27 '' 2010), two iPhones and iPad two minis. My current cable modem offers 34 mb/s download speeds and download about 6 MB/s.

    I will be grateful for any advice... Thank you

    I think my Airport Extreme of 2007 could be a brake on the increase in the speed of a new modem.

    There are 2 different versions of AirPort Extreme offered in 2007... a 1st generation version and the 2nd generation.

    The 1st generation version will manage an Internet connection speed of up to about 100 Mbps. The 2nd generation version will manage up to 350-400 Mbps.

    If your new service provider will be 100 Mbit/s or lower, it is not really important what version you have. Either the version of AirPort Extreme will take care of this service.

    If your new service will be 100 + Mbps, then you will have the Gen version 2nd of the airport to take advantage of the higher speeds.

    IF you have the 1st generation AirPort Extreme... And... your new service will be well above 100 Mbps... THEN... it might be a good idea to take a look at a new modem/router.

    HOWEVER... If your new service will be less than 100 Mbps... so you probably won't receive any improvement with a new modem/router and it would be wise to simply continue to use the airport until it fails.

    So an important question here might be... what version of AirPort Extreme do you have?

    Another important issue could be... your current modem will support the service high speed?

    Open the AirPort on your Mac utility and you should be able to know which version of airport you have.  If you can provide the serial number and model of your modem, we will see if we can find out what he can do.

    If you wondering if Comcast, you should know that the person you speak to will probably receive a bonus if you order a new modem or new modem/router...so you may not receive an unbiased opinion on their part.

    Finally, there are a number of users who believe that, as a general rule that you need to replace a modem or a router in about 5 years... even if it doesn't work OK. So, you might get some interesting opinions together.

  • Huawei mobile adapter unplugged network cable. How to connect

    Huawei mobile adapter unplugged network cable. How to connect?

    You can just X that out or let it go on its own, doesn't mean that you are not yet connected.

    You press Connect on the popup of the Application.

  • Cannot install WIndows XP SP3 - wireless adapter does not work with any package of service beyond 2.0

    original title: wireless adapter does not work with any package of service beyond 2.0

    I have an AirLiink 101 wireless adapter.  Anyone know how to change the service pack 3.0 for me to update my Windows XP?   Can not install 3.1 without losing wireless connection.

    Thanks for any help.

    If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

    UTC/GMT is 06:49 on Wednesday, April 11, 2012

  • How to play cd/dvd on HD TV via hdmi cable with windows media center?

    How to play cd/dvd on HD TV via hdmi cable with windows media center?

    Hello

    1 connect the computer to HDTV, and you are able to view the desktop on HD TV?

    And also what you play on desktop would appear on HDTV.

    Please follow the links below:

    Play a CD or DVD in Windows Media Center

    http://Windows.Microsoft.com/en-us/Windows-Vista/play-a-CD-or-DVD-in-Windows-Media-Center

    HDTV: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

    Connect your computer to a TV http://windows.microsoft.com/en-US/windows-vista/Connect-your-computer-to-a-TV

Maybe you are looking for