Upgrade to modem cable with router?

Similar Questions

• I can't connect to a modem cable with ethernet...

  I have a dell 2350 and ive used a usb connection in recent years, and now I want to change Ethernet so I can install my router wireless for my laptop...

  but there seems to be a problem... It does not connect to the internet, so I try to pop in the internet cable cd

  and this is what I get every time when I try to install "DOMAIN NAME SERVER (DNS) FAILURE". I have a motorola surfboard sb5100 modem...

  i tried searching, and i found this link http://support.dell.com/support/downloads/download.aspx?c=us&cs=19&l=en&s=dhs&releaseid=R64645&SystemID=DIM_PNT_CEL_2350&servicetag=&os=WW1&osl=en&deviceid=3597&devlib=0&typecnt=0&vercnt=3&catid=-1&impid=-1&formatcnt=1&libid=5&fileid=84196

  but... He has not always helped...

  I really want to get this wireless modem to work! Help

  
  

• How know if the router or modem cable is the problem with bad internet?

  I have intermittent problems of internet home.  The internet goes out for very short periods, then back on several times a day. At various periods of time, usually in bunches up.  Then sometimes instead of being down for maybe a normal 15-30 seconds, it could last 5-20 minutes.  And there are also periods of hours sometimes where the speed is VERY slow.

  When he is not at all working, Airport utility looks like in the following screenshot, with the orange Internet and other green devices.  Sometimes, it only shows the Internet icon and light, with nothing else underneath.  If the internet is very slow (and I mean really slow, like minute 2 page load or not at all), everything is green, including the Internet icon.

  

  It is the Charter cable with a modem surfboard, connected to an older Airport Extreme (in mode not wireless) model, which is connected to three aircraft from the airport, you can see in the screenshot.  Everything works very well for 8 years, but these problems have taken place in recent months. I replaced since the cable modem for a brand new, I have reset the Airport Extreme to the factory settings and tried all sorts of other things.

  It isn't the wireless aspect, because I can connect a computer to the ethernet jack and it has the same problems.

  So here's what I want to know: is there a way I can tell if it's the Airport Extreme or if it's the Internet Charter being flaky?  (I know it's not the cable modem because it does the same thing that before I replaced it).  I just want to isolate the problem. I don't want to succumb to Charter calling again, as we think the run around, I'm going to forward all tech would come home, and they never admits to have flaky internet.

  I bought a bolt of lightning to Gigabit Ethernet Adapter so I can plug my Macbook Air directly into the cable modem, without going through the Airport Extreme, but internet is not stay down long enough for me to access, plug it in and reboot the cable modem.   Frustrating.

  Suggest that you connect the MacBook Air directly to the modem, connect the Mac to the Internet and keep an eye on the MacBook Air from time to time for at least one day complete.  A few days would be even better, if possible.

  If the connection remains strong during your 'test', based on other information that you provide as...

  connected to an older model Airport Extreme

  and

  Everything works very well for 8 years

  The first thought that comes to mind is that life expectancy, on average, for airport routers is about 5 years. It's on food, on average, at the start of the descent position.  Momentary grave start occurring, and the drops will increase in frequency over time.

  It is a bet of $20, but you might consider replacing the external power for AirPort Extreme see if that provides any assistance.  This does nothing for the internal power inside the airport of course components.

  http://www.eBay.com/ITM/original-OEM-Apple-Airport-Extreme-Base-Station-power-Su PPLY-AC-ADAPTER-A1202 370810566512.

• Problem with TC loss of connection to the modem cable

  I have a TC of 2 TB which is connected to my ISP provided by cable modem. It worked fine for 3 months after the installation in December, but now all of a sudden it will lose its connection to the modem and we lose our wireless internet. We have replaced the modem cable and it does not solve the problem. I have to reset the TC 2 - 3 times a day. Nothing else has changed recently with regard to the network set up. that only changes were to specific devices that use the wifi connection, and this was always something changing, depending on the devices we use. Any thoughts? I'm not a savvy person tech, BTW.

  We need to ask a few questions in order to learn more on what the possible cause of the problem might be.  Please be patient with this. Thank you.

  What is the number and the model of the modem you are using right now?  We ask because some modems work better than others with Apple routers, and even if you have changed the modem, it could still be a model who does not get along well with the Apple router... or... you could say that the router from Apple does not get along well with the modem.

  How old is the TC? We ask because the life expectancy, on average, a time capsule is about 3 years.  After that, they tend to start losing connections to an ever-increasing rate.

  Who is your provider of Internet (ISP) Service?  We ask because most suppliers are in the active process of implementation of a new type of connection called IPv6 in their systems... and despite ISPS claiming that their system changes should cause no difficulties connection or interruptions system... which doesn't seem to be the case at all.

  We have seen an unusual number of reports from users who suddenly have problems with their ISP connection, when things were very well for many months before. That points directly to the IPv6 changes that ISPS are doing as the culprit. In some cases, there could be way to work around the problem, and in some cases, there is nothing to do but wait as the ISP to complete their changes and be everything to speed.

• What is best modem cable to twin with new extreme apple 802.11 ac

  I have an old motorola sb6121 paired with new apple 802.11ac extreme I bought yesterday and after 12 hours of trying everything I keep getting disconnected every few seconds... I have read all the message concerned and tried them all to play nice... When I have more signals 85 Mbps because I pay for the explosion of comcast.  I want a new modem and would like to know what is recommended... I see zoom 5141j is recommended, but I see zoom a modem cable new 16 x 4... It would be to my advantage to go with vx 16 x 4 8 x 4 channels at the time of the twinning with extreme? Thank you

  What is best modem cable pair with the new 802.11ac Apple extreme

  Questions like this are indeed impossible to answer... especially because that person has tested every modem with an AirPort Extreme to see if there is really a modem 'best '.  Even if it were possible to come with a modem 'best' but... it would be judicious bit to choose this modem and then knowledge that was not supported by Comcast.

  Therefore, a better plan for you may be to search a list of modems supported by Comcast, narrow your choices down to 3-4 products, then post this list here and ask other users of Comcast comments on how the products have performed for them.  You can also consider posting on a forum online from Comcast as well.

  Regarding your question about the new Zoom modem, this product is really new, so it will be some time before a work experience can be developed for this product. It seems that the new Zoom modem is designed primarily for working with connections to high speed... 600, 700, 800 + Mbps Internet speeds. So, unless you plan to upgrade to a plan of Internet connection with these types of speeds in the near future, you probably don't need a modem with this type of functionality.

• Problem with access to the camera on the net via dsl modem and linksys router

  OK, I read all posts here on what to do in this case and think I have tried everything. I have an Actiontec dsl (verizon) and a v2 wrt110 router. I can see the camera locally, but not on the net. I had it hooked to another place but with cable service broadband with no problems.

  I think that the problem of my lie with ip addresses.

  Camera 192.168.0.115

  Router 192.168.0.1

  Modem 192.168.1.1

  The port forwards on the modem MUST be set to port forward to the IP Address of the Linksys router. It should be only the modem IP can see, so it's the only place you can move forward from the modem. What exactly is in this drop-down list in the config of the modem port forwarding?

  The problem is that there are two distinct here networks once you are inside your modem. There is a network between the modem and the router. Allthat is on it is the modem's ethernet interface and the port of the Internet router (or WAN). There is another network on the side the router as your PC's LAN, camera, etc. are on. All know the modem is how to get to the network to which it is directly connected to. While you could add a route staic on the modem to tell him how to get to this network, the modem must still know I have oprt route traffic to your camera to the router.

• BEFSR41 wired router affected by change of modem cable

  Hi all

  You don't know if someone here can help me with a problem with the router above following a change of modem, I can get things to work, but once everything is turned off, the next time it starts things are back to how they were.

  To give a bit of history...

  My setup is a G4 Mac and a Xbox 360 Elite connected to a wired router BEFSR41, which in turn is connected to my cable modem, I am based in the United Kingdom so my ISP is Virgin Media.

  This configuration has been absolutely rock solid for more than 3 years, but last Sunday, I was unable to connect to internet and I noticed that the light on the modem was flashing instead of be constant, as it is supposed to be.

  I called Virgin and they did a test signal and confirm there is a problem and sent an engineer. He arrived Tuesday and confirmed the modem was very old and had packed and replaced by a new. We rebooted everything and everything was fine, I could email and get out on the internet as before.

  It worked fine the next day too but on Thursday morning, despite the fire loan being constant on the modem, I couldn't online again. I called Virgin and they did another test signal and said that something did not look right and they would send another engineer.

  He came Friday (different GUY), but confirmed that there is nothing wrong with the modem, the signal is OK just to verify, plugged the Mac directly into the modem, bypassing the router and I could get on the internet without problem.

  It seems that the router is at fault, but I have to say that it is a massive coincidence that it has stopped working correctly two days after the modem has been change, so I was looking at the configuration of the router via my browser page, and the only thing I did was to confirm under Type of Internet connection that "automatically an IP address to get" has been selected and I saved the settings and bingo everything works well again.

  So I put off, Mac, router and modem and switched back them and I'm at square one, no internet access. If I go to the router setup page again, "get automatically an IP address' is still selected and if I hit again 'save settings' everything works fine.

  I then started to bounce back each element separately and by turning the router or the mac on / off does not affect access, I am still able to get on the net, but as soon as I bounce the modem, I'm in the place again until I have click on 'save' on the router set up page.

  It's just my head in - what is the modem to the router to make it 'lose' its parameters and specifically, how to fix?

  I must say I don't remember when I bought the router through any complex installation, it is basically out of the box, go hooked upward and worked for 3 years and more.

  Any suggestions would be very welcome.

  Nick

  As far as I know, it seems that you have a cable modem.

  Your BEFSR41 should work with your modem when the BEFSR41 has been reset by default.  In addition, in some cases, you may need to 'clone' of the MAC address of the computer (the one that works when you connect it to the modem) in your BEFSR41.

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Let the empty user name (Note: some routers have a username "admin") and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen).

  (11) If you need to clone the MAC address of your computer, do this step now.

  (12) If you get this far without problems, quit your browser and put your entire network.  Then, using an ethernet cable, connect the ethernet port of your modem to the Internet port on the BEFSR41.  Leave your computer connected to a LAN of the BEFSR41 ports.  If your modem has a USB port, do not connect anything to it.  If your modem works with a battery, remove it now, and then wait one minute, then replace the battery.  Turn on your modem and let it start up completely (1-5 minutes).  Turn on your BEFSR41 and let it start up completely (1-2 minutes).  Turn on your computer.  Try to connect to the Internet.  If you have a problem, temporarily disable your firewall software computer and try again to connect.  If you still have problems, see 'The replacement boot order' below.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

  If you need additional help, please give the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.

  Changing the boot order *.

  The boot order (modem, router, then computer) that I mentioned above is the classic boot order, and it works with most of the networks.  Some networks will work well if you turn on all devices at the same time.  However, the other networks is very picky about the way in which they are started, and they may also require a different boot order.  Sometimes, it can require a lot of experimenting until you find the boot order that works.  For example, I had once a system requiring that I start the router first, wait 5 minutes, and then start the modem and the computer.  Try different orders on your system until you find what works.

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Why need a cable modem from a router can send and receive information to a computer?

  Why need a cable modem from a router can send and receive information to a computer?

  On Fri, 14 September 2012 17:14:59 + 0000, stuckfree wrote:

  Why need a cable modem from a router can send and receive information to a computer?

  A router is a device that connects computers (or other type of computer
  devices) to each other on a network and you can send files
  from one computer to the other. It does not connect to the internet, and
  you need a device called a modem vaguely to do this. The modem also
  connects to the router and allows the computers on the network
  (those connected to the router) to connect to the internet.

  However, note that there are some available devices that are
  router-modem combination. If your router is of this type, you do not have
  need a modem.

  Ken Blake, Microsoft MVP

• I recently had my computer repaired with a reinstallation of Vista. I've also changed since my old modem to a router. Now the quality of the video is of poor quality.

  I recently had my computer repaired with a reinstallation of Vista. I've also changed since my old modem to a router. Now the quality of the video is of poor quality. But after the call to another specialist, is no better. I'm a little stuck and don't know what to do.

  original title: choppy video streaming

  Hello

  1. what browser do you use to watch videos?

  2. are you having this problem on all sites?

  If you use Internet Explorer, I suggest that you try the troubleshooting provided in the link below steps to solve the problem.

  The video problems with Internet Explorer

  http://support.Microsoft.com/kb/2532294

• I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It will be useful.

• Connectivity problem - problem with the modem or the router of network

  I had a network with 2 computers.  The main computer was a Windows XP operating system and the secondary is a Windows Vista operating system.  There was a modem connection and the router. Due to a storm and a leak in my ceiling in my main computer got wet and I couldn't use it.  I have connected the modem without the router directly to the secondary computer, but it is not recognize the modem.  "Internet Explorer cannot display the webpage." So I ran the diagnostics and received a message that there could be a problem with the modem or the network router.  I did the thing 'ipconfig' and there is no gateway.  Is there anything I should do to make this secondary computer main computer?

  Hello

  If you use a router there is no primary and secondary, all the computers connected to the router are equal.

  Many Internet service providers allow you to control some form of autehtication (ID, PW) online journal.

  Your router and the computer humid probably were installed to authenticate.

  If the router does not use it.

  Otherwise, contact your ISP and ask for the help of authentication.

  Jack MVP-networking. EZLAN.NET

• Satellite M60: Little or no connectivity with the Modem cable

  Hello.

  I just got a Satellite M60, and I'll have limited connectivity or none when I try to connect to the internet via my Modem cable through the local network.
  OS is WIN XP Home SP2 PTG and I restored the original instalation, but nothing seems to work.
  Can anyone help?

  Thank you

  Hello

  What do you mean by limited connectivity?
  Did you check the system for viruses and worms?
  On the other hand, the active virus protection software can make your stream slowly or active. In addition, you check the cable lan for a few bows.

  Good bye

• No internet modem cable grandecom

  I have a Wrt54gs router, a cable modem Ubee DOCSIS 2.0 U10C018. My ISP is grandecom.net.

  I have cloned my pc mac address and can connect to systems of grandecoms with my router. (ie the wan interface to obtain an address of 24.155.x.x)

  I can't connect my internal pc to internet.

  I use a class c internal network 192.168.1.x

  my internal ip address of linksys is 192.168.1.1

  the ubee maybe ping internally in 192.168.100.1

  What should I set my routers gateway?

  I tried 192.168.100.1 and many others. including variations 24.155.x.x

  Any help appreciated.

  Where you found the ip 192.168.100.1 address?

  What is the version of the firmware on your router...?

  The entire network including the router and the modem and check power cycle... If this does not work then, try upgrading the firmware on the router and re - configure the router from scratch.

• I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. It does not appear in Airport utility. Any suggestions?

  I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. The base station does not appear in Airport utility. Any suggestions?

  Whenever you change the modem or modem/router to which the airport links... or... change your Internet connection process, the airport must be reset to the default settings and then set it up again to work with the new device.

  Your message did not mention if you did that, but if not... to perform a Hard Reset on the router of the airport would be the first thing to do, to follow in setting up the airport once again, just as you would if the airport was new and connection to your modem/router for the first time.