Adaptive reactive vs

Similar Questions

• Satellite L300-1AP - Realtek wireless adapter disappears

  I found many problems similar to this forum, but nothing that matches this one. Any help would be greatly appreciated

  Occasionally when I start my laptop I can not connect to wireless networks. My internet connection is fine by a cable.

  I found that when this happens, my "Realtek RTL8187B Wireless 802. "11b / g 54Mbps USB 2.0 Network Adapter" does not appear in Device Manager, even when I get it to show hidden devices. When I add legacy hardware and install the realtek adapter, it appears in Device Manager but says it cannot start because of "code 10".

  I deactivated and reactivated it, but the same problem occurs. I uninstalled and downloaded the driver from the Toshiba website, but the same problem occurs. I updated my BIOS and disabled the function, which is has not always worked WLAN energy saving.

  Annoyingly, this always works from time to time if I restart my computer. The map on the Device Manager and my works wireless according to normal. Then when I restart again, it will disappear again.

  I use Vista 32 bit and given to restore the system, but until I do, he does what anyone has any suggestions?

  I put really know what may be the problem but I can't imagine it's a software related issue. I've never seen something like that.

  In my opinion you should backup all of your important data, install the original Toshiba recovery image and test it with clean OS preinstalled and factory settings. Don't install anything, just test it several days to see if the same thing will happen again and again.

  If so, I assume that this is material junk.

• I can't see NEITHER vision adapter on windows 7

  Hello

  I use a scA-17gc basler and installed Vision acquisition camera to my computer (windows 7 Home premium). The software installed the vision OR for my gigabit ethernet network adapter intel pro/1000. But then I couldn't use a pylon software (supplied with the camera) and could not get the images. So I disabled the network card OR and reactivated the pylon ethernet driver. Then after that, I could get images of pylon. But I lost the adapter OR and can't find it. I tried these:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/5846

  http://digital.NI.com/public.nsf/allkb/2110361E0B829A7E8625762400783CA0

  but I can not find National Instruments vision GigE adapter on the list

  What do I need to reinstall CQI Vision.

  Can someone help me. Thanks in advance.

  Solved.

  NEITHER supports the card ethernet and driver manufacturer (intel). I have activated extended frames (the driver properties > advanced) and it worked.

• Too often activation required - WHAT hardware change requires reactivation?

  This is the 5th time I have to activate my Vista 64, the third time using the phone system.

  Install-> Activate (normal)
  Switch from IDE to AHCI Mode (+ updated drivers from AMD): reactivate, is not that I like it, but good...
  Updated AHCI driver: reactivate, this time by phone
  Cloning HARD drive to the new HARD disk (S.M.A.R.T. prefail) system: reactivate over the telephone once again, getting annoyed by the beast «on how many computers...» "question.
  Update driver today still: reactivate over the telephone once again, getting more annoyed by the beast «on how many computers...» "question.

  Vista 64 is WAY TOO HYPERSENSITIVE when it come to request reactivation.

  What exactely to material changes to or driver do Vista want to reactivate?

  Is it possible to NOT require reactivation?
  What will I do if activation fails and pleasant phone system or the Lady tells me "installed on computers too", even if it is installed on a computer?
  If you want me to illegally licensed in volume of open e (available due to my work) to avoid this inconvenience, Vista 64 me closer to do it even if I bought it normally.

  Set

  Setsunaaa,

  Product activation Microsoft detects configuration values of the material where the product is installed and creates values of hash for this configuration.

  Product activation can tolerate a few changes in the hardware configuration by allowing a hash value of current to have a difference of the hash value that is initially enabled.

  If the hard disk is reformatted and the software is reinstalled, reactivation is required. Same for the activation grace periods apply to this situation.

  Common changes to hardware, such as the mise a niveau video card, adding a second hard drive, adding RAM, or upgrading a CD-ROM drive, do not require the system to be reactivated. Specifically, Product Activation determines tolerance through a voting mechanism. Ten hardware characteristics are used to create the hardware hash. Each characteristic is rated as a voice, except the network card. The network adapter is rated as three votes.

  When you think about tolerance, thinks that what has not changed, instead of what has changed. The current hardware hash is compared to the original hardware hash, seven or more points must match for the two hardware hashes to be considered in tolerance. If the network card is the same, only four additional features must match, because the network card is worth three, for a total of seven. If the network card is not the same, seven characteristics other than the network card must be the same.

  If a component is changed one day, and then another change is done the next day, two changes are counted. The changes are cumulative. However, if a user is asked to reactivate, the hardware profile is reset to the new configuration.

  Even if it's embarrassing, if you are in the guidelines of the EULA, reactivation on the same computer can be performed as many times as necessary.

  Please see the following link for more details about the activation process.

  http://www.Microsoft.com/Windows/Windows-Vista/quick-start/activation-FAQ.aspx

  <><><><><><><><><><><><>

  Please report your results so that we can help you. Please use the community support for Microsoft Vista.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• This device cannot start. (Code 10) Windows 7 64 bit JMicron PCIe Gigabit Ethernet Adapter

  Apparently, I get this error at random times in the day.  My ethernet port just no longer works and I tried disabling and reactivation that used to (a while back) work.

  Then recently I was disabling and re-enabling it, it gets stuck in the 'disabled' and this error message appears when I open "Properties".  I tried to reinstall the drivers for the device with the CD of my laptop came with, but that has not worked so I looked on the site Web of Jmicron and found a newer driver who, after installing again, did not work.  I have a fixed work wireless, but not with no LAN no is a pain in the thigh.

  WIndows 7 64 bit Home Premium edition
  Sager NP 5165 Notebook
  JMicron PCI Express Gigabit Ethernet adapt

  Try to update the laptop bios and chipset software provided by your computer laptop oem (dell, hp, whoever). Fixed an instance I had 10 with a device error.

• Failure of the wireless adapter

  My wireless adapter keeps neglect and the console turns off.  He walks and stop using Fn + F5 does nothing when it failed.  It is reactivated when I reboot but fails again after a variable time from minutes to days.  Windows XP and Lenovo are fully updated.  I would appreciate any advice.

  Kind regards

  Rob

  ThinkPad T61

  CTO7658

  Intel PRO/Wireless 3945AG Network Connection

  Intel T9300

  WiFi means wireless LAN, which in your case is the Intel pro card, so this isn't the good drivers to uninstall.

  I am inclined to think that you have a thermal hardware failure, since you say that it works for some time during the first boot of the system. If reinstalling the software doesn't fix it, then you have a bad card, or even a bad system. It's a common part (intel pro 3945ag), I have some sitting on my desk, but it's a shame I'm half a piece of the world... but check to see if you can pick up local to you, would be the best way to know if yours is bad to replace just.  A used sells for about $5 here.

• I have windows 7 and how to remedy a wireless connectivity problem when it; s a problem when it has detected the wireless adapter or access point

  I have windows 7 How to deal with a problem of wireless connectivity. The problem according to the diagnosis of computer's wireless adapter or access which was detected point

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Banner reactive in CC Animate

  Hey Adobe,
  
  

  Can you explain how to use the new "adaptable" feature in Adobe animate CC?

  We try to make a banner of anglo-saxon reagent (938 x 340) that can resize a rectangle (320 x 340) in width, but we do not know how.
  
  Our sensitive issues:
  1. How can put us across the components/movieclips when resizing the browser? For example: make the text in the smaller display panel when you resize it to a rectangle format.
  2. How can we put the movieclip in the center of the stage and the scale a bit when resizing the browser? For example: the background image.
  3. How can we keep a movieclip around when resizing the browser? For example: customers logo
  
  Articles, we've found so far:
  

  Edge animate animate CC: reactive resizing and positioning - red-handed!  The file provided is scaling of the whole Web instead of several clips/items
  Documents to create HTML5 Canvas to animate CC  Article that explains what can do the function
  Animate CC 15.2 release (June): Express more with less | Adobe content corner Article says that it is possible and presents two photos of a canvas in several
  devices of)
  https://www.publishingblog.ch/responsive-exportieren-in-animate-CC/  German article explaining a bit about the feature

  
  Attach files in .fla made CC animate or tutorials on the use of this feature. would be a great help.
  
  Thank you!
  
  

  Michael
  
  

  Hi Michael,

  The feature to "sensitive" to Animate is still limited and work so that your entire canvas/stage adjusts its size according to the size of the browser of the Viewer. It also maintains the original aspect ratio while doing so.

  There is no option to scale selectively only a few elements; the scale is applied to the entire scene and everything together.

  For this reason, a specific angle or anchor Center element is irrelevant here that the relative positions of all elements proportional rest.

  To use sensitive scaling functionality in Animate, no changes do not impose themselves on the stage, simply activate the option via the publication settings.

  Essentially two types of scaling is followed - one maintains that the scale, another original aspect ratio can evolve into mode full screen regardless of the aspect ratio.

  The options you are looking for do not currently exist in Animate and need to be addressed via scripts only.

• Why my reactive site Muse plant them?

  I had a meeting today with the client and the site has been approved.  I had created a website with the four main points of rupture and changed all eleven pages to fit with different break points.

  Now, I wanted to keep working. The site opens, but a window appears immediately notify that Muse has detected an error and closes immediately.  This is the second time I had to build this site from scratch. I've lost over 40 hours of billable time.

  I'm desperate to finish this job, but I can't open the file to see what has gone wrong.  If something could have when adusting the elements on the 480 break point and closed the site with elements on the area outside the area of the page.

  Urgent need help!

  Ref: annak21595228

  File of Muse: dokRez28

  Date: 28 April 16.

  https://www.hightail.com/download/ZWJYa3NkNEh0d0ZnRXNUQw

  Dear Anna,

  Please review the files of my Muse.

  Despite the number of tutorials of Lynda.com, Adobe and Train Simple I'm afraid I'm stumbling presentation layout building a sensitive site without an understanding of how to treat. On the one hand, I feel privleged to take part in the method of Muse to create responsive web sites while on the other hand, I feel totally frustrated by understanding not correctly when to designate an element to be marked as 'none' or 'reactive width "; the question I'm worried about is when to pin or not to pin - not 1 million miles away from the message of Mr. Shakespear.

  During the assignment at the start of the breakpoints, I try to cover the optimal sizes that will cover the majority of the different screen sizes. In this regard, I put breakpoints (Bp) of the page master to 480, 724, 960 and 1200.  With a site property of height of 5000 page (to meet the mobile version).  Then, in Design mode, I chose to begin my first design addressing the 1200 Bp.

  My plan is to work my way through the Bps various worms implementation 480 I propose to consider as a separate entity.

  At the present time, I admit that I am learning by trial and error, that every page has a lot of problems - or learning opportunities!

  What frustrates me is why a page that has been fitted to my satisfaction changes as radically when it is revisited.

  The footer has for its own reasons chose to ignore my requests to adapt to the size of the page I stipulate. I tried to adjust the height of the page in the two Bp and in the Page Properties. Sometimes, it works.

  I have attached the dokRez28 file of Muse and also fixed the previously created with the version that is now live at http://www.dokmalithai.com.  I send you the Muse by Hightail, a service file, I used for a few years.

  I am extremely grateful that you extended your help and I look forward to your response.

  Kind regards

  Bill Watters

  Maybe it's my age even if I am not without some experience. When I have finally mastered it Muse I will recreate my own site which is so tired looking.

  (http://www.bilyzweb.com)

• HR 2015: What is the difference between reactivity and Multiscreen HTML5

  I compared the two descriptions of the HR 2015 manual PDF, taking effect the

  p. 433 - sensitive

  and

  p. 436 - Multiscreen

  and they are word for Word the same.

  I tested Multiscreen and see that it allows you to choose layouts for office, Tablet and phone, but not Responsive HTML5 which does as well?

  Why would you choose one over the other?

  Thank you very much.

  Huge difference between the two.

  With Multiscreen, you end up with several different sets of files. There is a page that is launched, he sniffs the environment and he ordered a specific set of output files. Then, maybe you have 300 subjects. You might end up saying, 410 different files for each of different outputs created. Release of RoboHelp 2015 seems to include three provisions in the default configuration. It would be a total of about 1 230 files to distribute.

  Reactivity is simpler. The same responsive project production would exist in a single set of files. Again, assuming that 300 subjects, you could end up with a total of 468 files to distribute. The coding causes the content to simply "adapt" to the space available on the screen.

  Another bonus with reactive output is that an advanced interface is provided in order to customize. Customization of Multiscreen is something not for the faint of heart. It's an arcane to say the least.

  Hope this helps... Rick

• Compositions of reactive

  Hello

  Anyone know if it is possible to make sensitive compositions with the new breakpoints?

  I'm adapting an existing in a reactive site, but stuck to a composition that does not allow me to choose the resize options as they are wanted.

  I tried to select targets and triggers separately, but that seems to have no effect.

  Thanks in advance

  Adobe help Muse | Migrate existing Adobe Muse Web sites to disposition

• Reactive layouts: publish multiple Sites with conditional Builds and which connect

  I hope that someone can provide a simple solution to publish problems I've had with adapted presentations when you try to publish several sites with conditional builds. Essentially, I want to be able to have an index page that links to one of the two variants of the published sites that I called 'General' and 'specific '. When I click on the 'general' link I want to not open the site which was published with a conditional for all these subjects compilation labeled as 'general' and when I click on the 'link' want it to open the site which was published using a conditional version for 'specific '.

  Here are the steps I took to create sites and can't seem to get to bind correctly:

  Table of contents, topic Creation and tagging content

  1. Creates a Table of contents.
  2. Added 2 topics in the Table of contents. The first topic, I called "general" and the second issue I called, 'specific '.
  3. I then click with the right button on the "general" and selected subject Tag to build conditional apply. From there, I've created a new tag called "General".
  4. I repeated this process to create the specific tag, but do a right-click on the 'specific' theme and the creation of a new tag called "specific".

  Layouts reactive and edited the sites based on the conditional tags

  1. Created sensitive presentation using the standard layout and content generated without any conditional builds.
  2. Duplicated sensitive put in page and gave him the content of 'general' then it is generated using the conditional, "General" version If the finished publication published content has shown that the 'general' subject, as expected.
  3. I then repeated the same process for the specific content and content using the version parole, generated 'specific '. When over content published showed that the subject marked as 'specific' as expected.

  Added an Index page to the table of contents

  1. Created a new topic to serve as the launch page.
  2. Added a 'general' hyperlink called for the launch of the general "theme found in the general publishes from the resource manager.
  3. Added a hyperlink called 'specific' to the launch of the general "theme found in the specific issues from the resource manager.
  4. I then republish the sensitive standard layout site.

  From this point, it gets stuck and won't open properly published Web sites. I don't know why it won't launch hyperlinks correctly. Is there something I'm missing? Let me know if you do not want to see my files. I will be gladly their.

  OK, thanks a lot for the capture screen. They help more than you realize.

  So here's one of the biggest mistakes I think that you have done so far. You use the resource manager to link to published results. If it is technically possible to do, I'm pretty sure Adobe never planned for it to be used this way.

  It may help to think in terms of creation of food products. I have long considered as RoboHelp to be very much like working in my kitchen. All consumables (heading text in the headings, images, HTML pages, etc.) are just as raw ingredients. (Eggs, milk, flour, etc.). The places of storage (hard drive) it's like the pantry and the fridge. And RoboHelp provides facilities to easily combine ingredients to create the different recipes.

  This next bit will be somewhat exaggerated, but bear with me. Maybe you have one or more neighbors and all you want to share some common "ingredients". If you set the things where each of you have access to a wine cellar and a shared refrigerator. Maybe you do a Dutch sauce killer. You create it and place in the refrigerator, then your other participants have access through the common "fridge". This is exactly what the resource manager is intended to help.

  Now assume that you create something like cookies chocolate chip and you keep in the refrigerator. Well, that's fine, but you don't want to use cookies to chocolate chip already baked in a recipe that might call for cookie dough. But that's what happens when you take an exit and place in a place intended for raw ingredients. And you will see the strange behavior. Prepare for these cookies chemically changes them so that cookies already are significantly different from the dough used to create them. Similarly, you don't want to take one or more output files and reuse in a project source.

  So in your case, you run an index file and that fires events to produce the output. All should be well. But when you click on the links to open topics, topics are intended to show up more in the right panel. Think of the picture of how works of image on a TV. The moment that link you to something intended to fill the screen, he is forced into this smaller area on the right. If you end up with what you see in the last picture.

  I suggest the following steps.

  First, REMOVE your resource manager exits.

  REMOVE all links that can point here.

  Output records where people will consume copy your projects. (The web server)

  Then figure either the parent (.. /.. / somefolder/somefile.htm) path to other systems or the absolute path (http://www.whatever.com) and to link the projects in this way.

  Sorry, but without seeing the installation of first hand, it is difficult to say what should be these paths.

  I hope this was helpful... Rick

• Adaptive layout of loading in the container (from Simon Widjaja tutorial)

  Hello

  I worked on a tutorial teaching Flexible Layouts, by Simon Widjaja.

  DGE-animate-and-the-edge-Commons-Library/ http://TV.adobe.com/watch/Create-Like-Crazy-with-Adobe-Edge/flexible-layouts-using-Adobe-e

  Its really a good tutorial. The reactive part is pretty basic, but for the adaptation of the part Im having problems, we load the code from github.

  I created the Adaptive symbols and copied all the code.

  IM asked to create a div container. It's simply a true rectangle? with a code.

  When I saw it, the only thing I see is the container (the rectangle).

  I don't know if people have done this, if someone might know what could be the problem?

  I have my file here:

  https://DL.dropbox.com/u/2093612/flexible.zip

  Thank you very much

  Hello

  Your images are not loaded. Why? Capitalization.

  You named your rectangle: "hasdaptativeContainer".

  You called (creationComplete and window.resize) from: adapativeContainer.

  Therefore, change your "A".

  You use: EdgeCommons-0. 6. 0.js

  It returns errors.

  EdgeCommons-0. 4. 0.js does not return an error.

  EdgeCommons 0.4.0: download the example files.

• Need help to find an adapter for a third-party monitor

  Hi all! I find myself in need of a little guidance, and I hope that someone out there will have a quick n easy for me...

  I have a Mid-2011 27 'iMac. which has two ports Thunderbolt It is taken with a Wacom tablet that I use constantly, and the other is made by an external hard drive to a solid state, which has a built-in cable to Thunderbolt (no way to hang it on a different port). I also have a 27 "HP monitor that is currently connected via an HDMI USB adapter.

  The problem is that the HP monitor is actual "jiggy" - the USB does not seem fast enough to deal with requests for the monitor. It is almost unusable. I know I should run it via a HDMI adapter Thunderbolt, but as I have already mentioned the two my Thunderbolt ports are already in use.

  Someone at - it ideas? I need sort of three to two ports Thunderbolt hooks, but I can't seem to find anything for less than $300 that would work. (I am illiterate when it comes to the different cables, adapters, ports, etc., so I hope someone can point me in the right direction by using short words... Most of the products that I travel through list specifications that me Chicane).

  The monitor has two HDMIs and a VGA port, and my iMac has a Firewire 800 port, if that helps at all...

  2011 iMac have only 1 Thunderbolt port and there is no such thing as a Mid-2011, you must have an iMac of year later, if it has 2 ports Thunderbolt. All the 27 "iMacs, from 2012 to 2015 the current have 2 ports Thunderbolt.

• Mac book pro charger adapter

  I have a Macbookpro bought in May 2010 and need a new charger adapter. I need to know what adapter I need. I tried to read the table, but it was only in 2012. If someone knows that it would be useful to feet!

  Find the right adapter cord for your Mac laptop and sector

  https://support.Apple.com/en-us/HT201700