Add a blank line, while Double spacing turned on

Similar Questions

• SQL add a blank line will cause

  Hello
  
  Currently, I use a temporary table to add a blank line to the top / the beginning of my results of the query. I'm moving to stored procedures in MS SQL and wanted to know if it is possible to add a blank line directly in my SQL, so I can remove the solution in the temporary table.
  
  Any thoughts on this is appreciated!
  
  cfwild

  Hello

  Thanks for the idea. It worked perfectly! For those seeking just a line insert empty 'above' the results of the query, here was the final code:

  SELECT the category
  SYNDICATION
  UNION
  SELECT "
  ORDER BY category

  Once again, thank you for the help!

• Add a blank line in the string

  I get a few sterning DB, I want to do if a new / line n is find add and empty string line, how to handle this?

  Do you mean?

  line = line.replaceAll("\n", "\n\n");
  

• MX 2004 Site FTP log contains only blank lines

  Can I transfer stuff to and from my remote server without any problem, but the Site FTP log seems to never contain blank lines. Each FTP adds several blank lines in the newspaper, but that's all. Have been looking through the documentation, technical support, forums etc, I'm not the wisest. Help!

  It turns out that when the remote site connection is configured to use SFTP nothing but line spacing gets written to the log when it is set to use standard FTP log gives the reports due. Guess I'll have to use FTP right if I want to see the reports.

• Blank line between lines of query output

  Is it possible to add a blank line between two rows of the query output?
  
  Sanjay

  user12957777 wrote:
  Is it possible to add a blank line between two rows of the query output?

  Sanjay, it's a problem of client - customer is responsible for rendering data. If whites are needed, then the customer must make as a result.

  Under the projection of the cursor SQL is not a good idea.

• < xsl: attribute name = "break-before" > page < / xsl: attribute >-add blank lines

  Hello.
  < xsl: attribute name = "break-before" > page < / xsl: attribute >-add blank lines.
  When to transfer the lines to the next page with the command
  < xsl: attribute name = "break-before" > page < / xsl: attribute >, a new page at the beginning of a blank line, then the data. And so on all pages. If < xsl: attribute name = "break-before" > page < / xsl: attribute > removed, the XML Editor displays all the lines correctly.
  
  I can send RTF and XML files.
  
  Does anyone know how can I solve this problem?
  Thank you

  Send me the xml files and the [email protected] model. I'll take a look. Also, can you clarify your needs and deliver a little clearer in your email?

  Thank you!

• How to write a double waveform in an Excel file without blank lines of cells

  Hello

  I am writing two waveforms in an Excel file, I'm almost there, but the stumper is that after each data line, a blank line appears in the XL file.

  Probably something simple I forgot because I am fairly new to this.

  Thanks in advance,

  Joel

  
  

• question about wordpad, because the lines are separated by a blank line

  When I type in WordPad, the lines are separated by a blank line, that is, the 1st line climbs to the 3rd line, with the 2nd empty line, it takes double up typing something.  It's the same thing with the types of different fonts.

  I tried to use 1.0 spacing of lines in the tab "paragraph" Section; but this tab doesn't seem to work properly.  The lines are always separated by a blank line.

  Looking forward to your reply and thank you.

  Wu Carlotta

  Set the line spacing to 1.0 and uncheck the ' Add 10pt space after paragraphs... :-)

• How can I stop double spacing when hitting enter. It seems just started doing it himself.

  I update the contact information within a page and when I hit enter I get double spacing. I always got a unique space that I need now, when hitting enter I get a double space. I can't find any way to remedy this problem. Any ideas?

  Thank you

  KAHSR

  In most parts of the document, you used
  Tags (SHIFT + ENTER) at the end of each line.

  You use now entered that creates a new paragraph and adds blank spaces above and below.

  For a quick fix, back the extra lines to and go back to using SHIFT + ENTER. You the code for this article should look like this:

  RIDERS OF THE GOSPEL
  

  Boyertown, Pennsylvania
  

  [email protected]"> Fred" > mailto:mjm@pagospelri ders.com "> Fred McClincy.
  

  1-215-234-8611
  

  www.gospelriders.com

  Use the entry when you start a new group name.

  If it were my site, I would rebuild it with some layouts CSS and definition of the lists that are much more semantically appropriate for this sort of thing.

  Nancy O.

• How to stop double spacing in Windows?

  I type a document or letter and do not want to double spacing. How can I change?

  What program are you referring to, Office Word?

  Page layout, click hyphenation and then see if this option is used, if check so do not use it, or go to options to set preferences, mine is fixed at 0.25, see what yours is.

  Any other spacing is in the section of paragraph for spacing of lines and dashes.

  Most of the option can be set by clicking a small symbol that is part of the section he refers to on the right end of the list items.

• Add some blank discs to AX100

  I'm adding four new 500 GB drives (Dell) for my Ax100 fibre, in addition to the eight existing operating drives, 250 GB each. The capacity is now 2.6 to and the FLARE is at version 02.19.100.5.048. I wanted to make sure with you to add four blank diskettes, he must insert them into the empty slots, while the SAN device IS RUNNING. You can then create another virtual disk or expand the existing CT 2.6 to include the new mark 2 TB of storage. Thanks to you all.

  
  

• How to remove the numbers on blank lines without fully justify above the text?

  Hello everyone.
  
  I have a problem with my numbering.  I would like to delete the line numbers where there is no text.  But when I back off the line of text without deleting the number, then shift + return to add a paragraph break 'justifies all lines'.  He said that it's always "justify the last line aligned to the left", but is not, and I can't change it back. I tried to manually change the justification, but it is so hard to do with all the paragraphs, and it looks like not equal. I have attached a few screenshots to illustrate my problem.
  
  Anyone know how I can remove the numbers of the lines without text without manually clicking the line line, ranging from 'bullets and numbers' and clicking on 'none' for each line?
  
  Or if I can't do that, do you know how I can stop the above paragraph that justify completely once I deleted the number of rollback?

  
  

  Thank you very much in advance, I really appreciate all the help you can give.  It's great that forums like this are there to help.
  
  
  

  

  Above is the screenshot where you can see that there are a number (25) on the empty text line.
  This is when I removed by backspacing of the line and then shift + return to add a new line, but her line above is fully justified, and not justified with the last line aligned to the left.

  

  Thanks for your help!  Natasha, a user of InDesign beginner.
  
  

  Return shift is a forced line break, so you now a last blank line, and is the one who remains aligned. ID does exactly what it's supposed to.

  Instead of trying to use blank lines to separate paragraphs you should use space after or front of the space.

• Insert a blank line after each line grouped

  Oracle 11.2.0.1

  Windows XP

  I need to create a table (who have more to exported to the Excel SQL Developer) something like this:

  The user Scott Table Emp

  
  

  create the table temptbl as

  SELECT

  -case when lead (deptno) OVER (ORDER BY deptno) = deptno then empno otherwise null end AS empno.

  -case when lead (deptno) OVER (ORDER BY deptno) = deptno then ename otherwise null end AS ename.

  -case when lead (deptno) OVER (ORDER BY deptno) = deptno then job otherwise null end AS work,

  -case when lead (deptno) OVER (ORDER BY deptno) = deptno then null deptno otherwise end up LIKE deptno

  WCP

  Table created.

  SQL > select * from temptbl;

  EMPNO, ENAME, DEPTNO JOB

  ---------- ---------- --------- ----------

  7782 CLARK MANAGER 10

  PRESIDENT OF 7839 10 KING

  7566 JONES MANAGER 20

  FORD ANALYST 20 7902

  7876 ADAMS CLERK 20

  SMITH CLERK 20 7369

  7521 WARD SALESMAN 30

  7844 TURNER SELLER 30

  7499 ALLEN SALESMAN 30

  EMPNO, ENAME, DEPTNO JOB

  ---------- ---------- --------- ----------

  7900 JAMES CLERK 30

  MANAGER OF 7698 30 BLAKE

  14 selected lines.

  SQL >

  But it is not giving me the last row of deptno.  If I have to display the data on sqlplus then I can use break on jump 1, but since I create my correct query table (around 10 K lines), I just want to insert a blank line after each data grouped.

  Thank you.

  Select empno, ename, job, decode (empno, null, null, deptno) deptno emp

  Group by grouping sets ((empno, ename, job, deptno), deptno)

  /

  EMPNO, ENAME, DEPTNO JOB
  ----- ---------- --------- ----------
  7782 CLARK MANAGER 10
  PRESIDENT OF 7839 10 KING
  7934 MILLER COMMITTED 10

  SMITH CLERK 20 7369
  7566 JONES MANAGER 20
  7782 CLARK MANAGER 20
  SCOTT ANALYST 20 7788
  7876 ADAMS CLERK 20
  FORD ANALYST 20 7902

  7900 JAMES CLERK 30
  7499 ALLEN SALESMAN 30
  7521 WARD SALESMAN 30
  7654 MARTIN SALESMAN 30
  SALESMAN 7698 BLAKE 30
  7782 CLARK MANAGER 30
  7844 TURNER SELLER 30

• How to make SQL * more count the comment and blank line numbers?

  Hello

  Parameter	Value of the parameter
  Oracle version	Enterprise Edition Release 11.2.0.1.0 - 64 bit
  OPERATING SYSTEM	Linux Fedora Core 17 (X86_64)

  I would like to know, is it possible to force SQL * Plus to provide the number of the current in the source file line whenever there is an error? I often put in the first line of my script SQLBLANKLINES the VALUE ON that I may be able to put several consecutive blank lines in my code (I do that sometimes, when I find that it is appropriate to make my code more readable or a sequence of instructions which I believe make their logic more comprehensible for the reader of the Group)

  Now the problem is that SQL * Plus will ignore these empty lines and whenever there is an error, the line number in the error message does not match the actual line number in the source file, but it seems to be the last non-empty line in the file.  Consider the following example:

  SET SQLBLANKLINES ON;
  
  DECLARE
      var PLS_INTEGER := 10;
  BEGIN
  
  
      
      var := 20
  END;
  /

  In the code above on line 9 (also counting blank lines), there is an error (no semicolon at the end of the var: = 20) but when I run the script

  SQL * also, here is the error message I get

  
  

  SQL > @myscript.sql;

  END;

  *

  ERROR on line 8:

  ORA-06550: line 8, column 1:

  PLS-00103: encountered the symbol "END" when expected in the following way:

  * & = - + ; <>/ is mod remains not rem

  < an exponent (*) > <>or! = or ~ = > = < = <>and like2 or

  like4 likec between | submultiset of type multiset Member

  The symbol ';' was replaced by 'END' continue.

  
  

  SQL >

  
  

  As you can see the error message indicates that the error was found on line 8, while in the file, it's really on line 9

  As long as the number of lines in the script is limited, this may not be a problem and we can quickly find the actual line number in the code that causes the error, but for a code, including hundreds (or even thousands) of lines and with many comments and blank lines, find line number given by SQL * error message more becomes complicated.

  So my question: is it possible to make SQ * more properly draw the line numbers, as they appear in the source file?

  Thanks in advance,

  Kind regards

  Dariyoosh

  Hi, Dariyoosh,

  The line numbers in error messages are always from the beginning of the statement, but not the file.  The back-end which checks the errors and generates the error message, has no idea if this statement has appeared in your file, even if the statement was in a file at all, or if it comes from multiple files, each with its own line 1.

  You can divide your scripts into parts, so that the long statements, which may lead to error messages, are each in a separate file, so the statement starts on the line 1 of the file.

  For example, you can call a script called fubar.sql, which looks like this:

  SET SQLBLANKLINES ON;
  
  @@fubar_1
  

  Which calls another script, called fubar_1.sql, located on the same directory as fubar.sql, that looks like this

  DECLARE
      var PLS_INTEGER := 10;
  BEGIN
  
      var := 20
  END;
  /
  

  You never call him directly fubar_1.

• Avoid blank lines at the top of the column

  So I create posts of all the two weeks and I had a question that would make my job easer.

  I've been messing around with the widow and orphans, but I have a slightly different problem.

  We use returns between paragraphs (a blank line between paragraphs), and I was wondering if there was a way to use GREP or showing something to automatically prevent blank lines at the top of a column.

  Right now, I have remove and re-add returns throughout the editing process, which as you can guess, can become messy and easy to miss.

  I wish I had where I don't have to do it all on my own, so the empty lines would be 'hide' automatically if at the top of a column, but would return if things get moved around.

  Thoughts?

  Thanks for the help.

  kwilly_1572 wrote:

  We use returns between paragraphs.

  .. can get messy and easy to miss.

  It's a reason that should not do this way. Correctly using the space before and/or after the space solves your problem.