Add a line in a text file

Similar Questions

• Add data at the end of a specific line in the text file

  Hello

  I'm trying to add data at the end of the last 4 lines of the text file attached with the ' table to add.  4 rows (422.5800 entry), I would add the first entry of the 'Array to add' entry, on the 5th line to add the second entry of the 'Add picture' and so on.  How can I do this?

  Any help will be appreciated.

  Sincerely,.

  hiNi.

  After re-reading your post, I think that's what you really want to start adding after the first 4 rows.

• How to concatenate strings with the lines of a text file

  Hello
  I tried concatenate strings with the lines of a text file, but something is wrong with my code and I belive is the agruments I use in the cycle for. If anyone can help me I will appreciate it very much.
  My code is:
  [code]@echo off
  the value "input=C:\Users\123\Desktop\List.txt".
  for /f "usebackq tokens = *" % in (' input % ') do)
  the value 'str1 = C:\some directory\ ".
  the value ' str2 = %% ~ F '.
  the value "str3 = .pdf".
  the value "str4 = str1% str2% str3%.
  echo.%STR4%
  ) [/ code]
  and the text file is something like:
  121122 [code]
  122233
  123344
  124455 [/ code]
  But I get only one wrong answer and I have to run it like 3 times to get a real result and it is a mistake, the first two are empty spaces and gives the third one as the last line of the text file but repeated n times, where n is the number of lines in the text file.
  Result:
  [code] C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\Users\123\Desktop>[/code]
  So if anyone has an idea about what is wrong please let me know.
  Concerning
  -Victor-

  Hi Victor,

  This forum is dedicated to the support of the Office of consumer Windows (fonts, colors, personal settings).  Since your question is about programming and usually outside the context of most of the customers, I suggest you post your question in the forums as http://msdn.microsoft.com - the Microsoft network to users will be more adapted to help you in your quest.

• Problem with end of line in the text file.

  Using LabVIEW 2010 on W7 64 bit in the USA.

  I have an application in which I write in a text file.  I use the function "Write to a text file" to write the text and "Reading a text file" function to read again.  My problem is with the end of line character.  The text that I write is a long chain, not an array of strings.  While building this chain, I insert the constant EOL of the palette of channels function to indicate that a new line is planned.  My tests showed this EOL constant values of consecutive bytes 13 and 10.  After writing all the text in a file, I can open the file with Notepad, or Word, or something else, and it is displayed correctly.  When I read he returned with the function of text file reading, I'm trying to parse the string by searching for the same constant EOL, but it does not work.  A closer examination of the extracted string from the file reveals that the value of end of LIFE has changed for only 10.  The location of the byte to 13 disappeared.  I know there is a note on the writing of the function of text file add/change the EOL characters, which are the default values of the system, but the note specific tables.  I manually put the value in the string.  Does anyone know why this happens and how to fix it?

  Thank you.

  The help of reading from text file function

  The function converts all characters in end of line break characters online platform, dependent unless you right-click the function and remove the check mark next to the menu item Convert EOL .

  Right-click your reading and uncheck the EOL conversion.  I recommend to do the same thing to your writing to text file feature.

• Use the lines of a text file as input to an SQL command

  Hello

  I have a text file containing the lines...

  123

  1234

  I would like to use as input for a SQL command running in a script. ie

  Update flag set < table > = 'Y' where job = < the text file lines >;

  Any help much appreciated.

  See you soon

  External table will do.

  For reference...

  CREATE TABLE Hold'em (SEQ_NUM NUMBER (10));

  insertion in hold select SEQ_NUM in task where proc like '% PROC;

  update set hold_flag = task ' ' where in SEQ_NUM (select hold SEQ_NUM);

• New line number in text file in Notepad open

  Hi all,

  Create a text file using the procedure and moved to the FTP folder. Text file opened through IE its working very well. Copied to the local computer and open in Notepad, its not work i.e., appeared in a continuous line. Return the correct sound also verified text only

  Code:

  Declare

  Begin

  v_File_Name: = utl_file.fopen (Dir_Obj_Name, filename, 'W');

  For Cur In (Select "A" A1, A2 'Two', 'Three' A3 double)

  Union

  Select 'Four', 'Five' A2, A3 A1 "Six" double

  )

  Loop

  v_line_Text: = Cur.A1 | ' ' || Cur.A2 | ' ' || Cur.A3 | ' ' || Chr (13).

  UTL_FILE.put_line (v_File_Name, v_line_Text, True);

  End loop;

  UTL_FILE.fclose (v_File_Name);

  End;

  Ouput except

  One two three

  Four five Six

  BoopathiL wrote:

  Hi all,

  Create a text file using the procedure and moved to the FTP folder. Text file opened through IE its working very well. Copied to the local computer and open in Notepad, its not work i.e., appeared in a continuous line. Return the correct sound also verified text only

  Code:

  Declare

  Begin

  v_File_Name: = utl_file.fopen (Dir_Obj_Name, filename, 'W');

  For Cur In (Select "A" A1, A2 'Two', 'Three' A3 double)

  Union

  Select 'Four', 'Five' A2, A3 A1 "Six" double

  )

  Loop

  v_line_Text: = Cur.A1 | ' ' || Cur.A2 | ' ' || Cur.A3 | ' ' || Tank (13);

  UTL_FILE.put_line (v_File_Name, v_line_Text, True);

  End loop;

  UTL_FILE.fclose (v_File_Name);

  End;

  Ouput except

  One two three

  Four five Six

  Well, your code is not still valid in the first place.

  There is no function called "tank", the real function is "chr".

  The character for a new line character is Chr (10) rather than Chr (13).

  In unix operating systems, the line break is just Chr (10).

  Operating systems windows/dos line break is Chr (13) | Chr (10), although some windows applications such as Word/Wordpad will understand * nix style chr (10) is like the newlines too, however, things like Notepad will not and will eventually display all data on a single line.

  When you transfer a text file of a unix operating system to an operating system of windows that it is usually performed using FTP and you need to make sure you put the software FTP in ASCII mode so that the new line characters get converted correctly...

  FTP > CSA

  200 type set to A.

  (for binary files, you ensure that the FTP is set to binary mode so that no byte in the file is corrupted by such a conversion).

  By transferring your file using FTP ASCII mode, from unix to windows, the characters Chr (10) in the file will be converted to Chr (13) | the pairs of characters Chr (10), then the file will be displayed correctly in Notepad.  If you transfer from windows to unix in ASCII Chr (13) | Chr (10) pairs are converted back to just chr (10) for unix.

  As an alternative, there's also a Unix utility called "unix2dos" which converts a text file from unix style returns to the line of back style line breaks, then you simply transfer the file in binary mode, so no other conversion takes place.

• Add a line around the text with a stroke

  This has been driving me crazy for years and often found ways to achieve "kind of", but I thought someone here might be able to help.

  Create a text, vectorize, add a line. OK, now I want to add a line around this whole thing so it is dye-cut on vinyl. My Cup is just a stroke with a color defined in my palette. I create 2 shots, but I can not understand how to get one to go on the other. I tried also to duplicate the image, to create just a glimpse, but it is impossible to get exactly described by hand.

  If I don't explain this right, please let me know.

  

  So, I have the text converted to outlines, white and gold accident fill stroke. I need to be able to dye cut it. If you add a new related, it's at the top of the old. Basically, I want to add a stroke to the race, but only on the outside.

  Thanks in advance!

  It transforms the effect (which is a direct construction but does not really exist) in paths that exist for the cutting line. Do you need a real tool to follow line don't you?

• Reading single line of the text file

  I use the following code to read a .txt file

  private String readTextFile (String fName) {}
  String result = null;
  FileConnection fconn = null;
  DataInputStream is = null;
  try {}
  fconn = (FileConnection) Connector.open (fName, Connector.READ);
  is = fconn.openDataInputStream ();
  Byte [] = IOUtilities.streamToBytes (is) data;
  result = new String (data);
  } catch (IOException e) {}
  System.out.println (e.getMessage ());
  } {Finally
  try {}
  If (null! = is)

  is. Close();
  If (null! = fconn)
  fconn. Close();
  } catch (IOException e) {}
  System.out.println (e.getMessage ());
  }
  }
  return the result;
  }

  I want to print a single line instead of the file around so I read that I need to store the contents of the file into an array and then get the index of the line. Problem is that I couldn't find any information on how to do it. Can someone give me a shot. Thanks in advance.

  This isn't a problem with encoding. You just need to do a little extra accounting and adjust start and end indices to remove these characters. To treat the "\r\n" of line termination style, you can maintain a flag (initially false) to indicate that the previous line ended with a \r; If a line begins with \n, it should be treated as the end of a line (empty) if the flag is true (in which case it should be ignored).

  If you want to extract all lines (not just the first), then it may be easier to do this accounting while avoiding a separate function. Something like this (untested):

  // read the file into a byte array 'data'; then:
  Vector lines = new Vector();
  boolean endCR = false;
  int start = 0;
  for (i = start; i < data.length; ++i) {
    if (data[i] = 0xD) {
      lines.addElement(new String(data, start, i - start));
      endCR = true;
      start = i + 1;
    } else if (data[i] = 0xA) {
      if (endCR && i == start) {
        start++;
        endCR = false;
      } else {
        lines.addElement(new String(data, start, i - start));
        start = i + 1;
      }
      endCR = false;
    }
  }
  String[] results = new String[lines.size()];
  lines.copyInto(results);
  

• I need to find all of the XML elements and add a line break for the text of each of them

  I need to find all XML elements and to add a line break the text of each of them.

  Is it possible with a script?

  Try this piece of code as it is. I hope that's what you want...

  var myDoc = app.activeDocument;
  var inddRooElement = myDoc.xmlElements.item(0);
  var xPathElements = inddRooElement.evaluateXPathExpression("//*");
  var elementCount = xPathElements.length;
  for(var eId=0; eId
  ----------------
  Green4ever
  		   

• text file as config

  Hello world

  Once again I have some difficulty.

  I'm trying to control Goepel Cascon with my labview. What I basically want to achieve is:

  I want a configuration file that contains a part of the serial number of my share a name. The serial number is parsed as a string of alphanumeric one limited to the first 10 characters. Now, I want to find the line in the text file that this shorter string is also written in as the name that is separated by a tab number is supposed to be read by labview and transmitted.

  All this is necessary for my final program when the apllication is generated can be updated just by writing new things in a text file.

  Thanks for help.

  Michael

  It would be useful that you can attach the text file. Basically for your scenario, you can read the text file in a table 2D-string with 'Tab' as delimiter and find the serial number and the name of the party. Come back if you face any problem.

• Compare 2 text files data and output match

  Hi all

  I need some advice.

  First of all, in BinaryCode.txt data are thus:

  Replace BinaryCode0 1 0 0 0 0 0 0 0 0
  Replace 1 0 0 0 0 0 0 0 1 BinaryCode0
  Replace 1 1 1 0 1 1 1 1 1 BinaryCode1
  Replace BinaryCode1 1 0 0 0 0 0 0 0 0

  the first line of the text file is the header. So I need to check if the names in the second column (BinaryCode0 or BinaryCode1) appear in the Timed_Sets.txt file.

  Timed_Sets.txt data as such:

  BinaryCode0, 6, 40...
  BinaryCode0, 7: 40...
  BCName1, 0, 20...

  BCName1, 1, 20...

  For example, as BinaryCode0 is a match that I pulled out the line whole Timed_Set.txt in another table.

  I worked on a program, but I do not get the expected results.

  Text files and VI are attached.

  I appreciate your kind assistance in this matter.

  Thank you

  Concerning

  Kart

  If I understand what the output should be so what you essentially have to do is walk through the column for each unique value and BinaryCode.txt, pull the corresponding lines of Timed_Sets.txt. There are a variety of ways to do this, depending on the amount of data you have and whether or not you can use any kind of prior knowledge as to the actual content of the file (for example names of key search). It's a joint way. Modify if needed.

• {Hurry!} Add to a text file

  Hi guys!

  I am new to the program and am trying to learn how to use it. Here's my problem,

  I did a temperature sensor and got data nor my DAQ, but I don't know how to add the date system time and the average temperature in a tab delimited text file. I got some advice saying that

  "By connecting the refnum of a shift instead of the refnum and blocks register, the loop will be continually data for each iteration of the loop, by reusing the name specified in the first iteration. The string value would be the range of string that should be inserted at the end of the file. If you want to really be a line (and do you) you need to be sure to have a line break / carriage return as the last character of the string. »

  that I really don't understand. Could someone give me a hand?

  Thank you very much!

  Rookie

  I knew that was coming next... This will put a timestamp and the temperature in the columns for each reading on a separate line

  

• CFFILE - reading text file and maintenance of line breaks

  I am using cffile to read a text document, then add then display the content of the text document in a file .xml for an atom feed. Everything works fine, but it seems that cffile is stripping on the line breaks in the original file so that the contents of the variable which is save has more no line breaks. Is there an attribute that I'm missing that will control this behavior or I have to go about it in different ways. Thanks in advance for any idea on this issue.

  Why do you say that line breaks are removed?

  If you just say that because when you look at the results in your browser.  Recall that the HTML standard ignores all the line breaks and most other white space.  A quick overview of the source will tell you if the line breaks are there or not.  Using the HTML code

  ...

  Tags is the right way to tell a browser not not to ignore white space in the source.

  But it is possible that somewhere along the process of conversion of text file to XML data line breaks are stripped.  But then, we would need to see significant process pieces for a chance to help you.

• In a sequence of CTF, is it possible to obtain a text file of sequence clips display? There is a display of text file for clips (cmd-9). Zoom the timeline cancels the ability to see the whole sequence of the time line.

  In a sequence of CTF, is it possible to obtain a text file of clips in sequences display (name and duration)? There is a display of text file for clips (cmd-9). Zoom the timeline makes this visible annotation for shorts, cancels but the ability to see the whole sequence of the time line. Of course, it would help my editing.

  TIA

  In Final Cut Pro 7, you can use editing > find command to search on used clips in the sequence. See if there is an equivalent command in FCE. Unfortunately, I can't determine that at first hand on my system. (In addition, if you are still interested whereas FCP X, there the so-called Timeline index which provides quick access to a list of markers, clips, effects, etc..)

  Good luck.

  Russ

• How to add data to a text file?

  Hello

  I want to add data to a previously created text file. When I used writing text file.vi. It replaces previous data.

  Try to use the function "set position in the file" (file e/s palette, advanced functions) before writing the data.

  either open the file, position set to finish, write the data, close the file.

  Ian