ADD A SECOND LISTENER TO USING SRVCTL COMMAND

Similar Questions

• I can settings add e-mail account by using the command line?

  Can I programmatically or by using the command prompt add parameters of "e-mail account"? for example: IMAP/POP3 "Incoming mail server" etc.

  No, there is no API to add an account without the help of the default interface of the to do.

• Call "HostNetworkSystem.UpdateVirtualSwitch" for the error of the object when you attempt to add the second NETWORK card

  Hi there - first post here, so please be nice :-).

  We are just trying to place an ESX4.1 own deployment in our environment (no previous installation of VMWare) to our main office, using Dell M610 and blades blades M600 to what would become our DR - two sites site hosting VMS on Equallogic iSCSI SAN disks.

  I configured 4 of our blade M610 with ESX 4.1 successfully and they work very well.  These blades have double NIC onboard, and after the initial installation of ESX, I could go to the virtual switch and add in the second NIC like vmnic1 (because one had already been detected during installation).  This fine workd for 4 guests on the M610 blades.  However, I came today to make my first installation on one of the old M600 blades and I encountered a problem.

  Installation went without any problems and I was able to add the host in my vCenter.  I can change all the settings without problem (created the Port of VMKernal for my connection to SAN iSCSI etc, but as soon as I try to add in the second NETWORK card, he paused for a while, and then I get the following error message:)

  Call 'HostNetworkSystem.UpdateVirtualSwitch' of object 'networkSystem-56 "on vCenter Server"VCEN01." ournetwork.local"failed. (network name has been changed for post).  When this happens, it locks up again for several seconds, and when the system returns, I can no longer communicate with the ESX host (Observer of events in vCenter watch 'host is not responding' and I find that I can not ping the host unless I reboot it.)

  If anyone has any suggestions I would appreciate it that I don't want to proceed down to the line with our Installer if theres an underlying issue and I need to redo everything.

  Concerning

  EFIN.

  Do you get the same error when you try to add the network adapter by using the command line?

  1. esxcfg-vSwitch - L vmnic1 vSwitch0

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• ADD THE AMOUNT WITHOUT USING THE COMMAND

  Hi 2 all...
  
  the table contains:
  
  UID billno amount
  1 101 100
  2 102 200
  3 103 300
  
  the o/p should be:
  
  UID total amount billno
  1 101 100
  2 102 200 300
  3 103 300 600
  
  I need the query for this pblm without using the command... Please advice... can someone send immed... Thanks in advance...

  If you still don't bother to write in proper understandable English or probably your keyboard is broken.

  Anyway you can do this

  SQL> WITH t AS (
    2  SELECT 1 col_uid, 101 billno, 100 amount FROM DUAL UNION ALL
    3  SELECT 2, 102, 200 FROM DUAL UNION ALL
    4  SELECT 3, 103, 300 FROM DUAL)
    5  -- end test data
    6  select col_uid, billno, amount, decode(amount, amount_cum, null, amount_cum) amount_cum
    7    from (
    8  select t.*, (select sum(amount) from t t1 where t1.col_uid <= t.col_uid) amount_cum
    9    from t)
   10  /
  
     COL_UID     BILLNO     AMOUNT AMOUNT_CUM
  ---------- ---------- ---------- ----------------------------------------
           1        101        100
           2        102        200 300
           3        103        300 600
  

• SX80 xcommand to add the second call

  Hello

  Everyone was able to add a second appeal in a call using xcommands and merge the calls?

  Thanks for the help

  Andrew

  Hi André,.

  I tried a few days ago on the SX20 in my laboratory using the following command and it worked

  xCommand call Join

  Manish

• How to add a second e-mail from an address of bigpond account in Thunderbird?

  I scoured my Mozilla Thunderbird's emails. My first email address ending by... bigpond.com and my second e-mail account is a bigpond address too. How can I add a second e-mail from an address of bigpond account in Thunderbird? No easy solution?

  My guess based on the error message would be that they don't offer POP e-mail, and you must have created the new account as IMAP.

  When you look at the original, working the account server settings indicate IMAP?

  If Yes to delete the new account a recreate using IMAP instead of pop.

• Can I add a second monitor?

  I'm used to 2 monitors, and I want to keep it this way.  I hung on a samsung monitor I have via HDMI to my Sprout.  It works, except that I can't seem to operate as one extension of the other.  I have set them up as an extension, but this is only to show the same as the monitor Sprout. All duplicates. I'm doing something wrong?  Sprout supports another monitor?

  Yes, you can add a second monitor.

  Right now, the only way to get it to work is to disable the Service to germinate, and then the 'third' monitor can be used as a large monitor. But it's the only way to expand at this time. I couldn't find a document about this, but here are the steps. And don't forget, all the germs associated options will be disabled, all 3 monitors at disposal for any windows application.

  Start the Task Manager (right click on the taskbar and select Task Manager)

  under the gaze of process for the germination process

  Stop it.

  now, your monitor can be extended.

  For starters, he do the same only backwards...

  Bill

• Satellite Pro A300 - can I add a second HDD?

  Hi Forums,

  I have an A300 PSAGDA-02000R and was wondering if it is possible to add a second HDD to it. After I removed the Panel to inspect where the second HDD going, I discovered that there is no connector, so I was wondering if you bought or have Toshiba install a second series of connectors?

  any response would be great

  Thank you F1R3F1GHT

  Hello

  > where will the second HDD, I discovered that there can be no connector
  That means that you can add a second HDD. That's fact!

  The fact is that all the A300 models using the same case but if you can connect a second HDD it according to the motherboard. This connector is attached to this topic and you can therefore add one such connector.

• Pavilion a6500f: can I add a second SATA hard drive to my HP Pavilion a6500f?

  I have a HP Pavilion a6500f running Windows 7 Home Premium.  I would like to add a second hard drive to 500 GB 7200 RPM to it as a slave drive.  Can I do this?  And if I can how do I know what size must have the hard drive?

  That your system is 8 years old, I suggest you these:

  (1) clone the old drive to a new drive, either 500 GB or 1 TB.  Use it as your new drive system.  Modern Sata 600 drives are 6 Gbps with 64 MB of cache memory. It will have better performance than older Sata 300 players with 32 MB cache / 3 GB/s.

  (2) your old-school, like the reader of the term 'slave' was a reference to the IDE/EIDE, cabling system.

  (3) all you need is a standard WD or Seagate 7200 RPM disk 3,5 '' hard. Both offer a free disk assistant program to facilitate the process of cloning.

• Qosmio F20: How to add a second HDD

  Hi all, my first post, so be nice!

  I recently bought a new Qosmio F20 with unique 60 gig HD. I realize now after a month, I need much more space, it will add a second 120 GIG HD. My question is, is this easy to do? How can I do? Is there a couple of screws to undo and just pop in? Also is there a certain type of HD necessary?

  Sorry for the questions of basic but this is my first laptop.

  Thanks in advance.

  Hello

  As far as I know that it is not possible to use two hard disks on F notebook series as on G series, delivered with two hard drives. In my opinion that the best solution is to use external USB connected HDD. On this way, you can use notebook HARD drive 2.5 in aluminum case.

  Google a bit and you will find many of them with a different ability. I use a 60 GB external HDD back up all my data.

  Good bye

• Available to add the second internal hard drive to 17-e117dx

  Hello

  Can you let me know, if there is provision to add the second internal hard drive for HP Pavilion e117dx 17.

  If so, one) is there requirments or the specifications of the hard disk (any make or model); (b) what equipment will be needed and where I can get to and c) Finally will be doing so make sure the warranty of my laptop HP Sub

  HP Pavilion

  Product: F9J38UA #ABA

  Model: 17-e117dx

  Thank you

  Not in the way you probably do. Here is the Service Manual:

  Manual

  See Page 50. Unlike the Envy 17 and Pavilion dv7, Pavilion 17 has that a single hard drive Bay. The only way to add a second hard drive is to remove the DVD (optical drive) and insert a DVD to the hard drive bay adapter. The manual shows how to remove the DVD player and you can buy the adapter at amazon.com or jacobsparts.com. Note that this is a 9.5 mm thick disc, not a 12.7 mm. Both types are available. I do not recommend the adapter DVD player solution because you lose the use of the optical drive, and also because the interface of optical drive is usually not as fast as the main hard drive interface. Always fast enough for simple storage and you can run a video of her, but you do not want to edit the video of this disc, for example.

  https://www.jacobsparts.com/items/HDDBAY-02/

  If you decide to go the route of adapter DVD I would buy a large capacity 5400 RPM SATA 2.5 inches wide and drive hard thickness 9.5 mm. No sense in buying a reader more expensive high-performance.

  http://www.Newegg.com/product/product.aspx?item=N82E16822178006

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• IQ846 - can I add a second monitor?

  I hope that some of you out there may be able to offer a suggestion as to whether or not it is possible to add a second screen to my IQ846 who is still using Vista x 64. Since there is no port output additional display on this machine, I expect it would change the video card - if that's even possible. So in fact, it's really my question: first of all, is easily removable video card (requires no welding); and secondly, does anyone know of a replacement card that would support the addition of a second screen?

  Here are the specifications of your desktop HP TouchSmart IQ846. This model contains no video outputs external of any kind (VGA, DVI, HDMI, DisplayPort, etc.). Change the MXM PCIe x 16 video card will be difficult, expensive, may not work and still not provide an external video output. To connect an additional screen consider using an adapter USB-to-video, like the eVGA UV plus + UV39 or one of the other many adapter on the market.

  Please send Bravo

• Is it possible to add the second graphics card for this model Y510p?

  I've been doing mixed responses from customer service chat lenovo so I'm posting my question here. Recently, I bought this laptop. It comes with a single graphics card. I heard this model has ultrabay and you add another graphics card. My question is - is it true that you can add a second graphics card in this system by using ultrabay? Please let me know. I'm confused if SLI and ultrabay means the same thing. If this is the case, then this system is not sli. I appreciate your help.

  http://shop.Lenovo.com/us/en/laptops/LENOVO/y-series/y510p/?SB=:000001 C 9: 00011E0A:

  Also, don't forget to find the extra $20 or sometimes $50 discount code for the Lenovo y510p and apply it to the Fund. The time I bought my laptop I used the code USPY5168320, you will find a similar code if this does not work.

• Pavilion 9408nr: Add a second drive for another main drive for laptops

  How can I add a second drive for another main drive of laptop computers. I took the car on the same cell type that crashed by the motherboard. I put it in drive Bay 2. Problems with starting. I sometimes want to boot from disc 2. Is there a MBR somewhere? Are there jumpers to make it slave. Sometimes it will install the software on 2 without any question. Is there a way to make a slave?

  Important-copy all data on the second hard drive you want to save on the first hard drive.

  MBR of Windows with the hard drive. Use Windows Explorer to locate the second hard drive. Right-click on it and format it.  Once this done, all what one is a storage device and not bootable until the operating system is installed to it.

  The BIOS will only see the hard drive as a bootable as it will now be the only drive with a MBR boot sector.

  The days of placement of the jumpers to determine master or slave on the disks hard is long gone. SATA drives have no jumpers slave\master like the old school IDE and Eide did.

• Add the second drive to ATC - 780

  I just purchased an ATC-780-UR61 with a 2.5 ssd "standard that I would add as a second disk as the startup disk and use the disk of 1 TB for storage. Now, I understand that there are only 2 SATA connectors on the motherboard - the one used by the 1 TB drive and 1 by the dvd player.

  Is it possible to add a second drive on this PC? I read some other models have a m2 connector to add a ssd drive to, but I don't see any documentation that the ATC-780.

  I can confirm:

  NGFFM1 m2 SSD connector

  It is on the right side of the motherboard near the SATA 2 ports.