Add a variable name?

Similar Questions

• Add a variable to an instance name

  I have a variable which is my flash movie during extraction (well, if all goes well... I am having trouble with loadVariables)... anyweezer, the variable is called "id". I want to add to the value of this variable then the end of a text string and then use it as a reference to an instance name.
  
  for example, I film clip with an instance name of TTMO110333. If the variable ID had a value of 110333, how would I use that in actionscript to allow me to refer to the last part of the instance with the variable name?
  
  something to the effect of...
  
  {run}
  it. "TTMO"+ id._visible = true;
  }

  Hi, use it.

  TTbutton1.onRollOver = function() {}
  eval("TTMO"+id1)._visible = true;
  }

• Where am I missing my illegal variable name/number

  I am updating a program that I created some time ago and set different levels of access based on a flag in a column. Now when I run the new version, I get variable name/number errors ORA-01036 occasional illegal in one of the functions.

  The code in question (where the only change occurred in this section) is:

  string l6Str = "SELECT email, leo FROM jc_hc_users_dev WHERE oof='F' AND id IN (SELECT usr_id FROM jc_hc_usr_snd_dev WHERE loi_id=:loiid OR grp_id=:grpid)"; OracleCommand l6Cmd = new OracleCommand(l6Str, lCxn); l6Cmd.Parameters.Add("loiid", OracleType.Int32).Value = L2id; l6Cmd.Parameters.Add("grpid", OracleType.VarChar).Value = l2GrpId; // if the reader is populated with email addresses, add them into a List for sending. using (OracleDataReader l6Rdr = l6Cmd.ExecuteReader()) { if (l6Rdr.HasRows) { while (l6Rdr.Read()) { if (l6Rdr["leo"].ToString() == "F") { CivEmails.Add(l6Rdr["email"].ToString()); } else { BccEmails.Add(l6Rdr["email"].ToString()); } } } }

  The loiid parameter is a Number (10,0) table and the: grpid is Varchar2 (10).

  Or is the problem in the l6Rdr ["leo"]. ToString() and l6Rdr ['email']. ToString() part?

  Thanks in advance for any help!

  I don't think that the problem is in the code from the outside. I guess that's probably on the query.

  Please, make sure that all values that are joined correspond to the data type:

  Number 4 and number (6) do not cause the error.

  can you show me the errors with the ORA-01036? Have you tried to reproduce the query in sqlplus? Maybe you can get more information...

• How to add the chapter name and page not for reference

  Hello

  How to add the chapter name and page not for reference in indesign CS6.

  Thank you

  Please try variable notion of text

• Add the double name of the hyperlink (MonLienHypertexte, MonLienHypertexte (2), etc.).

  Hello

  I am writing a script which automatically creates hypertext links, based on source XML-tag references in a text and their counterparts identically marked in the reference list. It works fine, except that a reference is sometimes mentioned twice in a text, causing the hyperlink to have the same name and crashing the script. I would like to have the names of hyperlink automatically added with (2), (3) etc. If this happens. I tried before with if/else statements, but unfortunately without success.

  My current script, without the addition:

  // General declarations
  var myDocument = app.activeDocument;   
  var myRootXML = myDocument.xmlElements[0];   
      
  // Include glue code
  #include "glue code.jsx";
  
  // Some main definitions
  main();
  function main(){
      if (app.documents.length != 0){
          var myDocument = app.documents.item(0);
          //This rule set contains a single rule.
          var myRuleSet = new Array (new findCitationRef);
      with(myDocument){
          var elements = xmlElements;
          __processRuleSet(elements.item(0), myRuleSet);
          }
      }
      else{
          alert("No open document");
      }
  }
  
  // Define function findCitationRef
  function findCitationRef() 
      {
        this.name = "findCitationRef";
        this.xpath = "//CitationRef";
        this.apply = function(myXMLPathSource, myRuleSet){    
           with(myXMLPathSource){
  
               var myXMLPathSourceID = myXMLPathSource.xmlAttributes.itemByName("CitationID").value;
                var myXMLPathDestinationID = myXMLPathSource.xmlAttributes.itemByName("CitationID").value;          
                var myXMLPathDestination = myRootXML.evaluateXPathExpression("//Citation[@ID='" + myXMLPathDestinationID + "']"); 
                $.writeln(myXMLPathDestination[0].contents);          
                
                var citationRefAnchor = myXMLPathSource.texts;
                var citationDestination = myXMLPathDestination[0].texts;
                // Store as a variable
                                 
                var myHyperlinkSource = myDocument.hyperlinkTextSources.add(citationRefAnchor);  
                var myTextAnchor = myDocument.hyperlinkTextDestinations.add(citationDestination);  
  
                var myHyperlink = myDocument.hyperlinks.add(myHyperlinkSource, myTextAnchor, {name: "Hyperlink " + myXMLPathDestinationID });
                
                false;
  
            }
          }  
       };
  
   // Call function findCitationRef
   findCitationRef();
  

  My miserable attempt so he could work, that will not cross the first hyperlink:

  // General declarations
  var myDocument = app.activeDocument;   
  var myRootXML = myDocument.xmlElements[0];   
      
  // Include glue code
  #include "glue code.jsx";
  
  // Some main definitions
  main();
  function main(){
      if (app.documents.length != 0){
          var myDocument = app.documents.item(0);
          //This rule set contains a single rule.
          var myRuleSet = new Array (new findCitationRef);
      with(myDocument){
          var elements = xmlElements;
          __processRuleSet(elements.item(0), myRuleSet);
          }
      }
      else{
          alert("No open document");
      }
  }
  
  // Define function findCitationRef
  function findCitationRef() 
      {
        this.name = "findCitationRef";
        this.xpath = "//CitationRef";
        this.apply = function(myXMLPathSource, myRuleSet){    
           with(myXMLPathSource){
  
            // Save the CitationRef ID to the variable, for future reference
            var myXMLPathSourceID = myXMLPathSource.xmlAttributes.itemByName("CitationID").value; 
        
            $.writeln("Eerste bevestiging: " + myXMLPathSource.contents + ": " + myXMLPathSourceID); // TO BE REMOVED
            $.writeln("Tweede bevestiging: " + myXMLPathSource.xmlAttributes.itemByName("CitationID").value); // TO BE REMOVED
            
            // Save the ID for the corresponding Citation        
            var myXMLPathDestinationID = myXMLPathSource.xmlAttributes.itemByName("CitationID").value;   
            
            // Find the corresponding Citation using aforementioned ID
            var myXMLPathDestination = myRootXML.evaluateXPathExpression("//Citation[@ID='" + myXMLPathDestinationID + "']");  
            $.writeln(myXMLPathDestination[0].contents);          // TO BE REMOVED
            
            // Store source and destination items in variables for future use in hyperlink
            var citationRefAnchor = myXMLPathSource.texts;
            var citationDestination = myXMLPathDestination[0].texts;
                             
            // Create the hyperlink source and destination
            var myHyperlinkSource = myDocument.hyperlinkTextSources.add(citationRefAnchor);  
            var myTextAnchor = myDocument.hyperlinkTextDestinations.add(citationDestination);  
                
            //Then, create the hyperlink, but first...
                  //... check if there's already at least one hyperlink
                  if(!myDocument.hyperlinks[0].isValid) //
                  {
                      // If not, that's where we'll create it
                      var myHyperlink = myDocument.hyperlinks.add(myHyperlinkSource, myTextAnchor, {name: myXMLPathSourceID});
                  }
  
                  // Otherwise, if there is at least one hyperlink...
                  else 
                  {     
                      // Go through all the hyperlinks
                      for(count=0; count<myDocument.hyperlinks.length; count++){
                          // If there's one with the current ID, create another one, but add the 'b' suffix
                          if(myDocument.hyperlinks[count].name === myXMLPathSourceID) {
                              var myHyperlink = myDocument.hyperlinks.add(myHyperlinkSource, myTextAnchor, {name: myXMLPathSourceID + "b"});
  
                           }
                          else // If there's none with the current ID...
                          {   
                              // Check if you've previously created one, and if not, create one:
                              if(!myDocument.hyperlinks[count].isValid) {
                              var myHyperlink = myDocument.hyperlinks.add(myHyperlinkSource, myTextAnchor, {name: myXMLPathSourceID});
                              }
                              
                              // If not, that's fine, we're done here. Let's go check the next citation.
                              else {
                                  } 
                             } // End check for the current ID
                      } // Stop going through all the hyperlinks
                } // Stop checking if there's at least one hyperlink
              }  // Stop going through all the citations
          
          }  
       };
  
   // Call function findCitationRef
   findCitationRef();
  
  
  

  Thanks a lot for all the directions you can give!

  Kind regards

  Julian

  I do something like this:

          //Hyperlink names must be unique. If a hyperlink has already been created with this name, this iterates a number to append
          //to the name in the format "(1)".
          var iter = 0;
         //Check if a hyperlink with the name I want to use already exists and that it isn't this hyperlink.
          while (myDoc.hyperlinks.itemByName(myHyperName).isValid
                  && myDoc.hyperlinks.itemByName(myHyperName).source.sourceText !== myThingToHyper){
              //Bump up the number to append by one.
              iter++;
             //Change the hyperlink name so that the old number is replaced with the new one.
              myHyperName = myHyperName.replace(/ \(\d+\)$/, "") + " (" + iter + ")";
          }
  

  You could change that to add a letter instead. the best way I know this is to create a string variable that contains the alphabet and slice the letter you need, but it could be any other way.

  I think the problem with your script, it's that you're not accounting for cases where there is more than two hyperlinks with the same name. You want to use a while loop so you keep looping until you hit a number or a free letter.

• Variable variable names

  In AS3, can someone tell me how to create variables with a variable names. For example, I would like to add an undetermined number of videos to the scene as follows:
  
  for (i = 0; i < numVideos; i ++) {}
  ...
  var vid + i = new Video();
  ...
  }
  
  I would like the video names like vid0 1 vid2, etc.. According to me, we could do this in previous versions of Actionscript with the
  function eval(); which is not available in AS3.
  
  Thank you

  But you'll want to probably use var and type because it is convenient. So, the trick is that you don't need to name your instances when they are created.

  for (var i: int = 0; i<>
  var vid:Video = new Video();
  VID. Name = "video" + i;
  }

  Then for access to them and all, you'll need to look for methods which include something like getByName or what you have.

  You could also do something like this:

  var myVideos:Array = new Array();

  for (var i: int = 0; i<>
  var vid:Video = new Video();
  myVideos.push (vid);
  }

  You can then simply use the references in the table to assign different properties and stuff and other.

  I did not make enough with AS3 to know all the advantages and disadvantages of the different ways to do this yet. But these are the two ways I've found so far to deal with this.

• How do I add another to: name a template

  I want to add another recipient to an existing model.

  Double-click it to open it again message based on the model. Add the new name, use file | Register under to save it as a template.

  You have now two models; You can delete the other oldest if you have no other use for it.

• How to add more variables to a read/write control?

  

  See how the read/write control is connected to global variables? I want to add more variables, I created the globals (some are listed in the table above), but as you can see that they are not available in the read/write control. How can I add them? I also tried to create a new read/write control, but as you can see that didn't help.

  Any help would be appreciated.

  Hi count3r5tr1ke,

  It seems that you are referencing a particular bitfile in open FPGA reference. I think that even when you save your FPGA VI, VI real time still referencing an older bitfile. Have you tried re - compile and referring to the new bitfile once finished compiling? A sure way to make sure that you have the most up-to-date bitfile is to check the VI option when you right-click on the FPGA Open reference and select Configure the reference open FPGA. When this option is checked, if you make changes to the FPGA code, it will force you to re - compile the FPGA VI before you reference it on the real-time side.

  Best regards,

• When you copy a file in the same folder, is it possible to choose where "copy of" add original file name?

  When you copy a file in the same folder, is it possible to choose where "copy of" add original file name?

  Someone has an idea?

  No, it is not possible.

• JAVA instructions tell me to locate my Autoexec.bat file to edit and add a file name path. I can't locate the file

  Original title: JAVA

  I am a beginner of JAVA.  Instructions to tell me my Autoexec.bat file to modify and add a file name path.  I can't locate the Autoexec.bat file.  I tried to locate using C:\windows\program files.  This .bat file hidden or located somewhere else where?

  Hello

  Autoexec.bat was used to BACK depending on version of Windows (95,98 and ME).

  1. What exactly are you trying to do?
  2. Indicates which statement allows you to edit?

  I suggest you to give us more information about the issue, so that we can help you better.

• Add a variable along the withQNetworkRequest

  Hello

  Is it possible to add a variable with the QNetworkRequest and receive this variable with the QNetworkResponse?

  Please help me

  Hello

  Yes, it is possible to transmit all information wrapped in QVariant using setAttribute whose attribute ID from QNetworkRequest::User to QNetworkRequest::UserMax.

  QNetworkRequest request(QUrl(apiURL));
  ...
  int offset = 12345;
  request.setAttribute(QNetworkRequest::User, offset); // primitive types are converted to QVariant automatically
  request.setAttribute(QNetworkRequest::User+1, someOtherVar);
  

  To get it back later:

  void ServerRequestManager::processResponse()
  {
    QNetworkReply *reply = qobject_cast(sender());
  
    int offset = reply->request().attribute(QNetworkRequest::User).toInt();
    ...
  
    reply->deleteLater();
  }
  

  I suggest to declare an enum for the ID attribute in the .h file:

  class ServerRequestManager: public QObject
  {public:  enum
    {
      AttributeOffset = QNetworkRequest::User,
      AttributeVar2,
      AttributeVar3
    };  ...
  };
  

• List of connection AnyConnect adds automatically the name of firewall internal

  I have a problem with running on our ASA5512 AnyConnect. The client adds the internal name of the firewall to the list of connection and makes it the default connection. When a user opens AnyConnect, they expect to try to contact the site asa5512 to expire before you change the selection to connect to.

  I tried to edit the files XML VPN-Users_client_profile and preferences_global in C:\ProgramData without result. I don't see the name of the firewall specified in any other file.

  When a user selects a server given in the drop-down list, it updates a local preferences file (by default, on windows) to:

  C:\Users\%username%\AppData\Local\Cisco\Cisco AnyConnect secure mobility Client\preferences.xml

• display variable &lt; variable name &gt; does not work

  Hello

  I use 11.1.2.2 Essbase version and I want to export a specific substitution to txt variable trust,.

  I used the command "Display the variable" and it works if I use the following syntax:

  variable display;

  < application > variable display;

  Display variable on < database >;

  but it does not work when I use a syntax to export a single variable:

  display variable < variable name; >

  Looks like the error message: ERROR - 1051083 - Substitution variable < variable name > does not exist.

  Of course, the variable exists in the server.

  I hope that someone will have an idea of what is wrong,

  Thank you

  Yuval
  

  Unless it's a variable substitution at the server level, it would need to be fully qualified, for example if you have a 'Test' associated with Sample.Basic variable, you must:

  display variable Sample.Basic.Test;

  ... not...

  display variable Test;

• I get error filter Render - error in initialization of symmetry script: line 43: Variable name expected. Help, please.

  Hi all

  I left creative cloud. Check the updates.

  That an activity that could affect system files was to uninstall applications CC, keeping the CC 2014 apps only.

  I need to use the flame of rendering filter, but I get the following error

  Error in the initialization of symmetry script: line 43: Variable name expected

  I get this error with tree to make and restore frame.

  A response will be appreciated

  Thank you

  Thank you for your response. I just came back good. After making sure that I got all the updates, I quit and restarted photoshop and it does the trick.

• Add the short name field for specifications in the XSL file

  Hello

  I'm looking for help to see if it is possible to add the short name for the inputs and spare field in a specification of Formulation in the XSL file. If it is possible, how can I do this?

  Thanks in advance.

  Well, CSS is much more locked, by design. So it's a little (or maybe a lot) more complicated.

  Also remember that if you change the CSS schema, and you use the web service contract that we provide for the CSS message, then the approach will probably be different. This means that the web service contract would not support additional XML nodes, unless he expects them.

  If you do not use our web service contract, then you could make changes in the XML in a different way. Can you elaborate on how you receive the message in CSS?

  Basically, if you use the web service method, then you will probably need to use the ExportExtensions method, which is documented in the CSS guide. ExportExtensions allows you to include xml code in a node specific extensibility through managers, which are classes that you configure in the config\extensions\exportExtensions.xml configuration file. It is currently the custom how sections are included in syndication. So you can add your own XML nodes and call you a custom class to provide additional data that you need.