Add data in the dumpfile parameter in command exp

Similar Questions

• Add data at the end of a specific line in the text file

  Hello

  I'm trying to add data at the end of the last 4 lines of the text file attached with the ' table to add.  4 rows (422.5800 entry), I would add the first entry of the 'Array to add' entry, on the 5th line to add the second entry of the 'Add picture' and so on.  How can I do this?

  Any help will be appreciated.

  Sincerely,.

  hiNi.

  After re-reading your post, I think that's what you really want to start adding after the first 4 rows.

• Add data in the header of a .wav file

  Hello guys,.

  I seek your help for a small problem that I can't spend during my internship.

  Here's what I want to do: I acquire signals that I write a .wav file. What I would do then is to reopen this .wav file and add data in the header, such as the sensitivity of the microphone for example. I am doing this is because it's one of our program of works, it can resume the pressure vs time signal using this information. I already have the hex code I need to add, but I was not able to determine if such a thing is possible or not after a day of research ideas would be greatly appreciated. I wonder if Matlab might do the trick but I prefer to stay with the 'normal '... screws

  Thank you very much for your help.

  To insert data into the middle of a file, you will need to rewrite the entire file after that point, as Gerd said in the linked post.  I would do the following:

  1. Search for the location you want to put your new piece
  2. Read 65 000 bytes from forward and store in a local cache (shift registers work well for this, or just a wire at this point).
  3. Write your new piece, taking note of how long it is
  4. Give your data buffered less the length of your new song
  5. Read a 65 000 other bytes and put it in a new buffer
  6. Write the end of the old buffer and a part of the new buffer until you get to 65 000 bytes
  7. Repeat 4 to 6 until you reach the end of the file
  8. Update the offsets in the header to match the new locations of piece, since you have moved things

  You can probably do it with both data pads in a pair of registers at offset in a loop.  The 65 000 bytes is chosen for best performance.  You can use other sizes, but your speed can suffer.  Let us know if you encounter any problems.

• Add data at the beginning of the text file

  Hello

  How can I do to add the data to the top of the file instead of down as the attached VI?

  Thank you

  hiNI.

  Read the entire file, the value of the offset position of the 0 file, and then write the data with the new data in the upper part.

  

• Adds data to the binary file as concatenated array

  Hello

  I have a problem that can has been discussed several times, but I don't have a clear answer.

  Normally I have devices that produce 2D image tables. I have send them to collection of loop with a queue and then index in the form of a 3D Board and in the end save the binary file.

  It works very well. But I'm starting to struggle with problems of memory, when the number of these images exceeds more than that. 2000.

  So I try to enjoy the fast SSD drive and record images in bulk (eg. 300) in binary file.

  In the diagram attached, where I am simulating the camera with some files before reading. The program works well, but when I try to open the new file in the secondary schema, I see only the first 300 images (in this case).

  I read on the forum, I have to adjust the number of like -1 in reading binary file and then I can read data from the cluster of tables. It is not very good for me, because I need to work with the data with Matlab and I would like to have the same format as before (for example table 3D - 320 x 240 x 4000). Is it possible to add 3D table to the existing as concatenated file?

  I hope it makes sense :-)

  Thank you

  Honza

  • Good to simulate the creation of the Image using a table of random numbers 2D!  Always good to model the real problem (e/s files) without "complicating details" (manipulation of the camera).
  • Good use of the producer/consumer in LT_Save.  Do you know the sentinels?  You only need a single queue, the queue of data, sending to a table of data for the consumer.  When the producer quits (because the stop button is pushed), it places an empty array (you can just right click on the entry for the item and choose "Create Constant").  In the consumer, when you dequeue, test to see if you have an empty array.  If you do, stop the loop of consumption and the output queue (since you know that the producer has already stopped and you have stopped, too).
  • I'm not sure what you're trying to do in the File_Read_3D routine, but I'll tell you 'it's fake  So, let's analyze the situation.  Somehow, your two routines form a producer/consumer 'pair' - LT_Save 'product' a file of tables 3D (for most of 300 pages, unless it's the grand finale of data) and file_read_3D "consume" them and "do something", still somewhat ill-defined.  Yes you pourrait (and perhaps should) merge these two routines in a unique "Simulator".  Here's what I mean:

  

  This is taken directly from your code.  I replaced the button 'stop' queue with code of Sentinel (which I won't), and added a ' tail ', Sim file, to simulate writing these data in a file (it also use a sentinel).

  Your existing code of producer puts unique 2D arrays in the queue of data.  This routine their fate and "builds" up to 300 of them at a time before 'doing something with them', in your code, writing to a file, here, this simulation by writing to a queue of 3D Sim file.  Let's look at the first 'easy' case, where we get all of the 300 items.  The loop For ends, turning a 3D Board composed of 300 paintings 2D, we simply enqueue in our Sim file, our simulated.  You may notice that there is an empty array? function (which, in this case, is never true, always False) whose value is reversed (to be always true) and connected to a conditional indexation Tunnel Terminal.  The reason for this strange logic will become clear in the next paragraph.

  Now consider what happens when you press the button stop then your left (not shown) producer.  As we use sentries, he places an empty 2D array.  Well, we dequeue it and detect it with the 'Empty table?' feature, which allows us to do three things: stop at the beginning of the loop, stop adding the empty table at the exit Tunnel of indexing using the conditional Terminal (empty array = True, Negate changes to False, then the empty table is not added to the range) , and it also cause all loop to exit.  What happens when get out us the whole loop?  Well, we're done with the queue of data, to set free us.  We know also that we queued last 'good' data in the queue of the Sim queue, so create us a Sentinel (empty 3D table) and queue for the file to-be-developed Sim consumer loop.

  Now, here is where you come from it.  Write this final consumer loop.  Should be pretty simple - you Dequeue, and if you don't have a table empty 3D, you do the following:

  • Your table consists of Images 2D N (up to 300).  In a single loop, extract you each image and do what you want to do with it (view, save to file, etc.).  Note that if you write a sub - VI, called "process an Image" which takes a 2D array and done something with it, you will be "declutter" your code by "in order to hide the details.
  • If you don't have you had an empty array, you simply exit the while loop and release the queue of the Sim file.

  OK, now translate this file.  You're offshore for a good start by writing your file with the size of the table headers, which means that if you read a file into a 3D chart, you will have a 3D Board (as you did in the consumer of the Sim file) and can perform the same treatment as above.  All you have to worry is the Sentinel - how do you know when you have reached the end of the file?  I'm sure you can understand this, if you do not already know...

  Bob Schor

  PS - you should know that the code snippet I posted is not 'properly' born both everything.  I pasted in fact about 6 versions here, as I continued to find errors that I wrote the description of yourself (like forgetting the function 'No' in the conditional terminal).  This illustrates the virtue of written Documentation-"slow you down", did you examine your code, and say you "Oops, I forgot to...» »

• Constantly add data to the chart 2D

  Hi I'm going to be very difficult to deal with some great paintings. What I'm trying to do is create a program that monitors the 23 entries of a controller for cRIO. Here is the flow of the program:

  1. the program starts and collects 1 sample per second of each entry and place into a 2D array, which has 23 columns and 10 rows

  2 only collect 10 samples, constantly replace the samples in this array.

  3. once a threshold is crossed any of the entries take the previous table and add it to a different 2D array that contains 360 000 rows and 23 columns.

  4. once the table is inserted permanently add data of each entry in the new table at 100 samples/s.

  5. the big Board has 360 000 lines because the program must be able to record data for one hour if necessary.

  I used 23 separate tables and it worked OK but it was much to ineffective and the program was slow. I can't get data to enter in the right table and I'm pretty frustrated so any help will be much appreciated. Thank you

  Adam

  At least I'd be initialize your berries to the largest possible size that you may encounter. When adding data use the subset of table replace to update the table with your new data. In addition, I would put these paintings in a shift register. Avoid to display an indicator of control to data, do not use local variables or property nodes to access the data. or the other.

  Also, do you need to have all the data in the application while it is running? You can use medium running or other methods to reduce the amount of data, you should keep in mind? May store data to disk and keep only part of it in memory and read only comprehensive data when you need it?

• How to add data to the SD card file?

  I use OutputStream to write data to a file on the sd card.

  Before you start coding, I assumed that we can use a similar api seek() but I couldn't find a way to move the file position.

  is it possible to add data using OutputStream or any other method?

  FileConnection.openOutputStream (long byteOffset)

  byteOffset - number of bytes to skip from the beginning of the file when the positioning of beginning of the OutputStream. If the supplied offset is greater than or equal to the current size of the file, the OutputStream is positioned at the end of the file to be added.

• IMPDP - how to import a dump file data including the dumpfiles Clustered.

  
  Hello

  Can someone suggest me how will import data from dumpfile using IMPDP, if the EXPDP has used several Dumpfiles clusters. ?

  I want to import a particular file will only, which will be possible?

  When I tried this way I was getting error.

  IMPDP USER/PWD@SID DIRECTORY is DUMPFILE DATA_PUMP_DIR = DUMPFILE01. DMP LOGFILE = IMPDP_DUMPFILE01. LOG SCHEMA = < NAME >

  ORA: 39002 INVALID OPERATION

  ORA: 39059 dump file set is incomplete

  ORA: 39246 cannot locate a master table in provided dumpfile breast.

  Note: The Exp was made in oracle 10g (10.2.0.4.0), I import the dump file in Oracle 11.2.0.1.0

  Please advise on this.

  Concerning

  Suresh

  This doesn't make much sense.  I guess you have several dumpfiles from an export order and you don't want to import 1.  How can you know what is in the dumpfile that you want to import?  Is the last thing that will do the job of data pump export the main table.  How do you know which file is in and then you're sure to import objects are in the same dumpfile.

  The answer is NO, this is not supported.  During the Data Pump import starts, it checks that all dumpfiles at time of export are included in the import job. If this is not the case, the job will fail.

  Dean

• How to add data to the table?

  Hello

  As it is in question. Can I add data (new items) in table dynamically? I say my table 1 d is size 3, but I would like to add three items. Should I change size table first?

  See you soon,.

  K

  Hi K,

  Ray is right!

  Maybe this thread will also help you because there are examples of smal

  http://forums.NI.com/NI/board/message?board.ID=330&message.ID=18421&query.ID=288653#M18421

  Concerning

  Jürgen

• How to add data to the table changed in sql developer at Apex and vice versa

  Hello

  I had tables of database with sql developer. But now, I have modified the database (new tables added + changed the data in the tables). However, in the Apex, I the old database. Is it possible to get the new Apex database with the data of the table changed so this database in both places (sql and apex developer) is exactly the same... Also the other way around.

  Thank you

  The database schema that contains the tables, is it associated with the workspace even you are searching through the APEX product t development?  Why I'm asking is, if they are the same schema, the tables that you MODIFIED should be appear in the sql for APEX workshop part.  Now reports and forms will NOT see the changes (unless you have actually added or updated definitions for column).

  Can you explain what exactly you were doing the SQL Developer to the tables in your schema?

  Thank you

  Tony Miller
  Los Alamos, NM

• How to add data to the table using Manager POST for restful Apex application

  Hi all

  I managed to create a service application web Manager restful using GET for the Restful service module. I am able to get the data in row on the presentation of a table row id in the application. But I can't find an appropriate example, how the new data in the table can be posted or deleted. I created a POST handler for a URI scheme and look forward on how to proceed. Any help would be really appreciated.

  Source for the POST Manager:

  Start

  insert into ALL_BOOKS values(:id,:book);

  end;

  Also created 2 parameters id and the book.

  Hi jerry2134,

  jerry2134 wrote:

  I managed to create a service application web Manager restful using GET for the Restful service module. I am able to get the data in row on the presentation of a table row id in the application. But I can't find an appropriate example, how the new data in the table can be posted or deleted. I created a POST handler for a URI scheme and look forward on how to proceed. Any help would be really appreciated.

  Source for the POST Manager:

  Start

  insert into ALL_BOOKS values(:id,:book);

  end;

  Also created 2 parameters id and the book.

  Check out the following tutorials OBE, that explains the creation of GET and POST RESTful Web Services and how to use them in the APEX.

  • Creation and use of RESTful Web application services Express 4.2
  • Creation and use of RESTful Web application services Express 5.0

  Also what yo mean "looking forward on how to proceed? Do you want to or created for use/consume in your Oracle APEX application hosted RESTful web services?

  If Yes, in your Application, you must create a RESTful Web Service reference -> shared components. Then, create a form/report based on Web Service reference.

  Kind regards

  Kiran

• Need to add data to the tables in the target

  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production

  Hi gurus

  Need your help again, I have the following data.

  Sample data

  create the table parent_mst

  (

  GRP number (3).

  nel number 4

  );

  create the table parent_dtl

  (

  GRP number (3).

  by number 4

  );

  Query

  with pp as

  (

  Select double union 100 grp, nel 8000

  Select grp 200, nel 7000 double

  ),

  As CC

  (

  Select grp 100, 200 per Union double all the

  Select grp 100, 300 per Union double all the

  Select grp 100, 400 per Union double all the

  Select grp 200, 400 by double

  )

  Select *.

  pp p, cc c

  where p.grp = c.grp;

  -Result of the query

  GRP, NEL, GRP_1, BY

  100	8000	100	200
  100	8000	100	300
  100	8000	100	400
  200	7000	200	400

  Now, I want to insert the following data into the parent_mst table.

  Need to insert the following data in parent_mst using all of the above data

  GRP nel

  100 8000

  200 7000

  Need to insert the following data in parent_dtl using all of the above data

  GRP BY
  

  100 200

  100 300

  100 400

  200 400

  Please guide. Thank you

  Concerning

  Shu

  Check if it works:

  INSERT INTO parent_mst
     (SELECT p.grp, p.nel, p_seq.NEXTVAL
        FROM parents p
       WHERE p.grp IN (SELECT grp FROM childs));
  
  INSERT INTO parent_dtl
     (SELECT c.grp, c.per, DENSE_RANK () OVER (PARTITION BY 1 ORDER BY c.grp)
        FROM childs c
       WHERE c.grp IN (SELECT grp FROM parents));
  
  COMMIT;
  

  See you soon,.

  Manik.

• Simple Question: Can I add data to the target home page?

  I have a daemon process that I followed and I want to put the vendor, version, start time, path, etc. on the homepage of target. How can I do this?
  
  As far as I understand it, I can add graphics to the home page of the target and create reports, but I have not found how to do this.
  
  I use GC 10.2.0.5.

  That is right. The new version of the Guide extensibility should be somewhere online now, or should be available soon. That describes the feature that allows you to put the cards on the home page. Unfortunately, it won't really focus on what you want to do. All that is allowed through this feature is pie charts, histograms and graphs for time series.

  The best solution is probably to create a report with the information that you want, save appears in the homepage of the target instance reports sub-tab.

• The query options using command exp

  Hello

  I'm trying to export a data tables under the following conditions, but it fails. How to export data from tables with the sub condition? The data type of the column is ID NOT NULL VARCHAR2 (80)

  test/test exp = EMP query = tables------"' where id like ' % 00% ' \ ' log = emp.log file = emp.dmp"

  Export: Release 11.2.0.1.0 - Production Fri Nov 21 21:54:12 2013

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  Export in US7ASCII and AL16UTF16 NCHAR character set

  Server uses WE8MSWIN1252 (possible character set conversion) character set

  About to export specified tables by conventional means...

  . . export the table EMP

  EXP-00056: ORACLE 911 error encountered

  ORA-00911: invalid character

  Export completed successfully with warnings.

  The same conditions as the table below mentioned number of records.

  SQL > select count (*) from emp where id like ' % 00% ';

  COUNT (*)

  ----------

  2701

  Kind regards

  007

  PL note that first export is desupported in 11 GR 2 - see the first section of the Note to the Original export

  You should use expdp with the QUERY parameter - Data Pump Export

  HTH
  Srini

• Add data to the input csv file

  I'm using a csv file as my data entry for a test. Test data are simply saved in a table. How can I add these data from table to the CSV of origin, as an additional column, once you click on the stop button?

  To add a new column, the only way is to read the entire file, convert a 2D array, add the new column and then write the new 2D array in file. This is a limitation of the windows way written files and has nothing to do with LabVIEW.