Add e-mail aliases using the character '+' is not allowed

Similar Questions

• Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the drop-down list box. Any ideas on how to solve this problem? I tried to use the toolbar Customize to drag an icon to the toolbar.

  Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the mailbox (impossible to select) drop.  I tried to use the toolbar Customize to drag an icon to the toolbar, but it doesn't work anymore. Using Mail 9.2 and OS X 10.11.2.  Any help is appreciated.

  The Send button will not be activated unless the message can be sent. Are you sure that you have entered a recipient and the account is online?

  The connection doctor (window menu) displays errors.

• Using the "character in a be executed the command (EMM)

  Hello

  I ran against a little challenge construction of a function on a menu based EMM.

  I would like to have a user to change the number dialed in a chat script, but the script of cat command uses the character "in his order.

  The same character "is also used to mark the beginning and the end in the and the .

  When the execution of the function, it gives an error message indicating return: TCL EMM error: extra characters after the end-winding

  Which is weird because there are a lot of "in the command line and, normally, you can put multiple lines in a single ExecCommand command - or ConfigCommand line to mark the beginning and end of a single line of command."

  "According to the script language TCL, you can write the character"-"or -" but neither one of them circled to make it work.

  The ConfigCommand I want to run looks like this:

  "no internet chat script" "internet chat script ' ' ' ATDT * 98 * 2 #" TIMEOUT 60 CONNECT»

  Does anyone have an idea how to solve this problem?

  I'm just stuck with it.

  Kind regards

  Jorn van Riel

  Instead of using IOSConfigCommand, use EmbeddedTCL.  For example:

  ios_config "no chat-script internet" {chat-script internet "" "ATDT*98*2#" TIMEOUT 60 CONNECT}
  

• The pdf I want to change has all embedded fonts.  When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem

  The pdf I want to change has all embedded fonts.  When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem if I'm updating from Acrobat X?

  You have the fonts installed in the system. This has not changed. (Having the police is not always enough, but it is certainly necessary).

• Brush is using the background color not the FOREGROUND color.

  For some reason any my brush uses the background color not the FOREGROUND color. I went to the window of COLOR but I can't go back. ???

  Try to press B to select the tool brush then right click on its icon and select the reset tool

  

• Models of DW: 'this document uses the following files not in this site.

  I recently started using DW templates in CS6. It was a bit frustrating at first, but seems well wouth it. I've created quite a few pages in the folder root of hares and have no problems there. However, I created a new folder to a different section of my site (mysite.com/new_folder/new_page.htm), and then went to save a new page of the model and got the message "this document uses the following files not in this site. Its the same site, just a new folder which is placed at the root.  When I save the page in the new folder there to make a copy of duplicant images, css scripts and place them in the new folder to work? Must be a way to do it and have DW know where to find the original files surely?

  Thank you

  I downloaded a test page... It turns out that the 'message' was just misleading and all the Info page has correct links. Everything is good

• BEA-494002: the current role of the connection is not allowed to use the console

  Versions of the product:
  SOA Suite 11.1.1.4
  WebLogic Server 10.3.4
  
  I create a domain template using model of Fusion Middleware domain generator (< MIDDLEWARE_HOME > \wlserver_10.3\common\bin\config_builder.cmd) with release template.jar
  Characteristics of the source domain:
  -Domain OSB (Oracle Service Bus)
  -a managed server
  -mode of development
  -jrockit JVM
  
  
  When I create a new field using template.jar, start admin server and try to access sbconsole, the lancers of error to follow:
  < 7 July 2011 14:02:45 BRT > < error > < ALSB Console > < BEA-494002 > < internal error occurred in OSBConsole: the current role of the connection is not allowed to use the console action: ' / StatusMessages ' com.bea.alsb.console.common.base.SBConsoleAccessException: the current role of the connection is not allowed to use the console action: ' / StatusMessages.
  at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:88)
  at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
  at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
  at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
  at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
  Truncated. check the log file full stacktrace
  >
  
  Any idea?

  It is an old bug. This bug would be fixed with ALSB 3.0 :)

  Problem: Model ALSB 2.6 Builder does not include certain security files

  Applies to:
  Oracle Service Bus - Version: 2.6 and later versions [Release: Aqualogic Service Bus and later]
  Information in this document applies to any platform.

  Symptoms
  When a model is built from an existing default values area, the JAR file is the following security files:

  DefaultAuthorizerInit.ldift
  XACMLAuthorizerInit.ldift

  So if a new domain is created with the model, sbconsole throws an access control security errors.
  A similar problem occurs when you are using WLST to clone an existing domain.
  When you access the service bus console, he doesn't know that the 'weblogic' default user has administrator permissions.

  You receive the following exception:
  Throwable: com.bea.wli.common.base.SBConsoleAccessException:
  The current role of the connection is not allowed to use the console action: ' / viewAlertSummary '.

  Stack trace:
  com.bea.wli.common.base.SBConsoleAccessException: the current role of the connection is not allowed to use the console action: ' / viewAlertSummary '.
  at com.bea.wli.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:73)

  Cause
  Security policy files that exist in the area were not being grouped in the domain model when you use Model Designer.
  Therefore, the default server policy files were used which are not applicable for ALSB areas.

  Solution
  You can implement the following workaround solution:

  with model generator:
  Ensure that the authorized person of the domain policy files are grouped in the model. This will cause these files to be extracted in the areas newly created (using the template). All new domain ALSB will be ALSB security policy files.

  UN - jar, the template.jar file.
  Copy the two files .ldift of the domain that you used to create the template and paste them into the safety record of the contents of the jar file.
  Re - jar file template.jar and create a domain using the template.

  with WLST:
  While cloning a copy existing domain missing files from the domain you created in the directory of your new domain security.

  Products
  --------------------------------------------------------------------------------
  Middleware > SOA > Oracle Service Bus > Oracle Service Bus

• How to monitor the SQL perticuler using the INDEX or not?

  I'm running on a long-term quary and the output is coming very late. So, I want to know that the quary sql uses the index or not? How do I know that?

  Hello

  You have not provided your db version?
  You can check v $ object_usage in a simple way. Try to check the explanation of your query if you current sql is by using your existing index or not.
  Check with dbms_xplan.display

  Request to go through the links of Ask tom and jonathan lewis
  http://jonathanlewis.WordPress.com/2007/02/15/index-not-used-10G/
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:736825544526

  HTH

  -Pounet N

• In an attempt tp install I-tunes, I said "the administrator will not allow him" - what can I do?

  I try to install I-Tunes, but my Vista system does not end.  At the end of installation, I get a message indicating that the administrator will not allow the program to add.  I have had no problem in the installation of I-Tunes on my other PC with a system 7.

  Hello

  (1) did you of recent changes to the system before the show?

  (2) are you connected to the system as an administrator?

  (3) what is the exact error message?

  Method 1:

  Follow the links below to solve problems and then try to install iTunes and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2: Uninstall and reinstall iTunes.

  Follow the article mentioned below to uninstall and reinstall iTunes in high mode and check if this solves the problem.

  Uninstall and reinstall iTunes.

  http://support.Apple.com/kb/HT1923

  Also visit the below mentioned link.

  http://support.Apple.com/kb/ht1926

  http://support.Apple.com/kb/TS1331

  It will be useful.

• Standard rates and the entrance of the element do not allow to enroll in the NEW program

  I have a problem when creating a new program that has a weekly reference period. Currently I have age on a two-week program that must be moved in the weekly program. (NOT ALL EAS IS MOVED). I'll be the error of:
  
  "You cannot register a person in a plan that includes more than one rate of activity with the same element and the input value. Flat rates ADD - provider - ER and ADD - provider - ER - weekly uses the same element and input value and are attached to the subject of compensation. You must change your configuration so that these rates of activity do not use the same element, the input value and purpose of compensation or register the person in a plan that does not include participation rates with the same element, the input value and object of compensation. "
  
  -NOTE: the entrance of the same element and the input value are used in the same plan for different types of employees already (options) (i.e. service provider, hourly, salary)
  
  Standard rates use the same element and input value, but the object of compensation called a different program and is not the same combination. (EITHER 1. Weekly program-ADD-Service Provider-ER 2. Benefits of the program - service provider of ADD - ER). I need assistance or advice to fix this problem. I'm trying to enroll individuals in the current program so that it will not draw the same entry element but without success. I tried to register for a 'new' employee so that has not already been registered in any program and still receive the same error. Any suggestions?

  Hello

  Either way, I got the same error today and here is what happened in my case: in some sort eligibility has failed and the life event gave eligibility for both options using the same rate. This is why the error message.
  The error message is misleading and makes you look to the configuration of the rate.
  However, the central question is if employee is faulty (in my case) for the two options (Oipls in my case) including standard rates are atatched to a single item, then obviously the system think, you assign the same employee element twice.

  Check if it is the case with you as well.
  To do this, you can do the rates involved as 'dormant' at an earlier date - run an event admin and test. Making inactive will decouple the rate to the eligibility/electability.

  Let me know if this helped.

  Kind regards

• "The operation is not allowed" error when you click on the SUBMIT"" button.

  I created a form in Acrobat 9 with a "submit" button in order to send the entire form by e-mail.  Under the export format, the PDF the complete document option button is selected.

  The submission is a hidden button until the user presses a button (accepting a warning in the codument; irrelevant); then the Send button appears and can be clciked on. It works very well

  It seems to not work on some browsers MS Internet Explorer or Reader 9 and will return the error "the operation is not allowed.

  The URL field is defined as

  mail to: [email protected]

  On Safari (MAC) browser, when you press the option button to display the Send button, the Send button at all.

  Any ideas?

  I have no idea about the appearance on the MAC, but submit with drive problem, it's that you must enable the form for readers to submit the entire form. There is no need to submit the entire form as FDF or XML data files are easily import the form in Acrobat. The problem with the activation of the rights of the reader, is that you are limited by the license to 500 copies. If you get more than that, you're violating the license. You can negotiate with Adobe if you plan to spend for a substantial sum. If you do not enable the rights of the player, then people should have no problem with the submission (with the exception of any mail problems - a danger of using electronic submission) and you would not have a problem with the license.

  It would be useful to know if you have created the form in Acrobat or Designer. There are significant differences.

• XmlValidate() - the content is not allowed in prolog

  I posted in another thread, but I think that the problem described, it is resolved, so I'm starting a new thread with this new number.
  
  XmlValidate always returns "content is not allowed in prolog" I searched this forum and google and I've seen where this problem has been solved for some. It seems that the most common cause was a hidden character (BOP I think) in the file. However, I checked that my xml has not just in it.
  I'm a Loos as to how to proceed. I hope someone out there saw it and that fixed it. I need serious help.

  Quote:
  Posted by: newsgroup user
  How do check you this?

  I ran a very useful code Ben Nadel at http://www.bennadel.com/index.cfm?dax=blog:1206.view who basically Gets the first characters of the parsed XML and outputs with Asc(). After executing this code, I had no extra character in there.

  I have to sort this issue however. I had the first parameter in quotes:
  (" http://www.myserver.com/MyXsd.xsd") >. When I removed the quotes the error "the content is not allowed in prolog" disappeared, but I came back to the original problem that I mentioned in another thread. Namely, the code runs about 30 seconds and then a JRun Servlet error returns with "500 null" on the page.
  It turns out that it was because I had in the file xsd is called in XmlValidate. Once I copied and pasted the code in DocumentCommon.xsd in the called xsd, replacing the , it worked.

  Very frustrating.

• By mistake, I downloaded a program called driver of dog. But now the program does not allow me the 'uninstall '. Help! Thank you

  Recently downloaded a program called 'dog driver.  It was a mistake.  But when I went into Control Panel to use the feature to "Uninstall" to remove the program... the program will not allow the uninstall feature to remove it.  Any suggestions?  Thank you

  If the Control Panel does not remove the software, you can use an uninstall program:

  Revo Uninstaller - if she is not fully removed - follow the link and download the free version:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

• "The operation is not allowed in the current state" message when you delete the folder

  I'm test ESXi 5.5 and mounted a datatsore of oriented export NFS in an attempt to redirect my ScratchConfig at this place. I found that I can create a folder in the datasore NFS fine but when I try to delete it, I get a message saying "the operation is not allowed in the current state. This happens on any of the files/sub-sub-sub-folders and only used account's root - I also confirmed that these directory drwxr-xr-x permissions.

  As suggested by KB1003829 which is a bit useful, but not really, I restarted the management on the host agents but it made no difference. Has anyone else seen elsewhere?

  I got this resolved, stumbling on the good guid for the NFS data store. Only after clicking around in WinSCP and realize that the NFS data store guid secondary, shorter - I then tried again to remove the original test directory and it worked.

  On a separate but similar note, then I tried to update my position zero config by applying this same guid with the command "vim - cmd hostsvc/advopt/updated updated ScratchConfig.ConfiguredScratchLocation string vmfs/volumes / [guid] / logs" (followed by a restart of the host) and it worked also.

• Dashboard agent - "sorry. The view is not allowed. »

  Hello

  I get the message "Sorry. The view is not allowed. "instead of filtering options in the dashboard of the Agents (Management Server > Agents).

  I am connected with the user "foglight" (with the role of 'Dashboard Designer' by default)

  

  

  How is it and how can I get back to normal?

  Concerning

  The missing object is seen Services/Builder/managing groups.  Make sure you have the role of operator assigned to your username, as this seems to be the only role on this object.